Merge branch irq/meson-gpio into irq/irqchip-next

* irq/meson-gpio:
  : .
  : Expand meson-gpio support to deal with the new Meson-S4 SoC
  : .
  irqchip/meson-gpio: Add support for meson s4 SoCs
  irqchip/meson-gpio: add select trigger type callback
  irqchip/meson-gpio: support more than 8 channels gpio irq
  dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs

Signed-off-by: Marc Zyngier <maz@kernel.org>

1 files changed, 90 insertions, 16 deletions

diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index d90ff0b92480..2aaa9aad3e87 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -16,7 +16,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 
-#define NUM_CHANNEL 8
+#define MAX_NUM_CHANNEL 64
 #define MAX_INPUT_MUX 256
 
 #define REG_EDGE_POL	0x00
@@ -26,6 +26,8 @@
 
 /* use for A1 like chips */
 #define REG_PIN_A1_SEL	0x04
+/* Used for s4 chips */
+#define REG_EDGE_POL_S4	0x1c
 
 /*
  * Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
@@ -51,15 +53,22 @@ static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
 				      unsigned int channel,
 				      unsigned long hwirq);
 static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
+static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+				    unsigned int type, u32 *channel_hwirq);
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+				      unsigned int type, u32 *channel_hwirq);
 
 struct irq_ctl_ops {
 	void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
 				 unsigned int channel, unsigned long hwirq);
 	void (*gpio_irq_init)(struct meson_gpio_irq_controller *ctl);
+	int (*gpio_irq_set_type)(struct meson_gpio_irq_controller *ctl,
+				 unsigned int type, u32 *channel_hwirq);
 };
 
 struct meson_gpio_irq_params {
 	unsigned int nr_hwirq;
+	unsigned int nr_channels;
 	bool support_edge_both;
 	unsigned int edge_both_offset;
 	unsigned int edge_single_offset;
@@ -68,28 +77,44 @@ struct meson_gpio_irq_params {
 	struct irq_ctl_ops ops;
 };
 
-#define INIT_MESON_COMMON(irqs, init, sel)			\
+#define INIT_MESON_COMMON(irqs, init, sel, type)		\
 	.nr_hwirq = irqs,					\
 	.ops = {						\
 		.gpio_irq_init = init,				\
 		.gpio_irq_sel_pin = sel,			\
+		.gpio_irq_set_type = type,			\
 	},
 
 #define INIT_MESON8_COMMON_DATA(irqs)				\
 	INIT_MESON_COMMON(irqs, meson_gpio_irq_init_dummy,	\
-			  meson8_gpio_irq_sel_pin)		\
+			  meson8_gpio_irq_sel_pin,		\
+			  meson8_gpio_irq_set_type)		\
 	.edge_single_offset = 0,				\
 	.pol_low_offset = 16,					\
 	.pin_sel_mask = 0xff,					\
+	.nr_channels = 8,					\
 
 #define INIT_MESON_A1_COMMON_DATA(irqs)				\
 	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
-			  meson_a1_gpio_irq_sel_pin)		\
+			  meson_a1_gpio_irq_sel_pin,		\
+			  meson8_gpio_irq_set_type)		\
 	.support_edge_both = true,				\
 	.edge_both_offset = 16,					\
 	.edge_single_offset = 8,				\
 	.pol_low_offset = 0,					\
 	.pin_sel_mask = 0x7f,					\
+	.nr_channels = 8,					\
+
+#define INIT_MESON_S4_COMMON_DATA(irqs)				\
+	INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init,		\
+			  meson_a1_gpio_irq_sel_pin,		\
+			  meson_s4_gpio_irq_set_type)		\
+	.support_edge_both = true,				\
+	.edge_both_offset = 0,					\
+	.edge_single_offset = 12,				\
+	.pol_low_offset = 0,					\
+	.pin_sel_mask = 0xff,					\
+	.nr_channels = 12,					\
 
 static const struct meson_gpio_irq_params meson8_params = {
 	INIT_MESON8_COMMON_DATA(134)
@@ -121,6 +146,10 @@ static const struct meson_gpio_irq_params a1_params = {
 	INIT_MESON_A1_COMMON_DATA(62)
 };
 
+static const struct meson_gpio_irq_params s4_params = {
+	INIT_MESON_S4_COMMON_DATA(82)
+};
+
 static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
 	{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -130,14 +159,15 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
 	{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
 	{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
+	{ .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
 	{ }
 };
 
 struct meson_gpio_irq_controller {
 	const struct meson_gpio_irq_params *params;
 	void __iomem *base;
-	u32 channel_irqs[NUM_CHANNEL];
-	DECLARE_BITMAP(channel_map, NUM_CHANNEL);
+	u32 channel_irqs[MAX_NUM_CHANNEL];
+	DECLARE_BITMAP(channel_map, MAX_NUM_CHANNEL);
 	spinlock_t lock;
 };
 
@@ -207,8 +237,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	spin_lock_irqsave(&ctl->lock, flags);
 
 	/* Find a free channel */
-	idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
-	if (idx >= NUM_CHANNEL) {
+	idx = find_first_zero_bit(ctl->channel_map, ctl->params->nr_channels);
+	if (idx >= ctl->params->nr_channels) {
 		spin_unlock_irqrestore(&ctl->lock, flags);
 		pr_err("No channel available\n");
 		return -ENOSPC;
@@ -256,9 +286,8 @@ meson_gpio_irq_release_channel(struct meson_gpio_irq_controller *ctl,
 	clear_bit(idx, ctl->channel_map);
 }
 
-static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
-				     unsigned int type,
-				     u32 *channel_hwirq)
+static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+				    unsigned int type, u32 *channel_hwirq)
 {
 	u32 val = 0;
 	unsigned int idx;
@@ -299,6 +328,51 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 	return 0;
 }
 
+/*
+ * gpio irq relative registers for s4
+ * -PADCTRL_GPIO_IRQ_CTRL0
+ * bit[31]:    enable/disable all the irq lines
+ * bit[12-23]: single edge trigger
+ * bit[0-11]:  polarity trigger
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[X]
+ * bit[0-16]: 7 bits to choose gpio source for irq line 2*[X] - 2
+ * bit[16-22]:7 bits to choose gpio source for irq line 2*[X] - 1
+ * where X = 1-6
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[7]
+ * bit[0-11]: both edge trigger
+ */
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+				      unsigned int type, u32 *channel_hwirq)
+{
+	u32 val = 0;
+	unsigned int idx;
+
+	idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
+
+	type &= IRQ_TYPE_SENSE_MASK;
+
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(idx), 0);
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		val |= BIT(ctl->params->edge_both_offset + idx);
+		meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+					   BIT(ctl->params->edge_both_offset + idx), val);
+		return 0;
+	}
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
+		val |= BIT(ctl->params->pol_low_offset + idx);
+
+	if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+		val |= BIT(ctl->params->edge_single_offset + idx);
+
+	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+				   BIT(idx) | BIT(12 + idx), val);
+	return 0;
+};
+
 static unsigned int meson_gpio_irq_type_output(unsigned int type)
 {
 	unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
@@ -323,7 +397,7 @@ static int meson_gpio_irq_set_type(struct irq_data *data, unsigned int type)
 	u32 *channel_hwirq = irq_data_get_irq_chip_data(data);
 	int ret;
 
-	ret = meson_gpio_irq_type_setup(ctl, type, channel_hwirq);
+	ret = ctl->params->ops.gpio_irq_set_type(ctl, type, channel_hwirq);
 	if (ret)
 		return ret;
 
@@ -450,10 +524,10 @@ static int meson_gpio_irq_parse_dt(struct device_node *node, struct meson_gpio_i
 	ret = of_property_read_variable_u32_array(node,
 						  "amlogic,channel-interrupts",
 						  ctl->channel_irqs,
-						  NUM_CHANNEL,
-						  NUM_CHANNEL);
+						  ctl->params->nr_channels,
+						  ctl->params->nr_channels);
 	if (ret < 0) {
-		pr_err("can't get %d channel interrupts\n", NUM_CHANNEL);
+		pr_err("can't get %d channel interrupts\n", ctl->params->nr_channels);
 		return ret;
 	}
 
@@ -507,7 +581,7 @@ static int meson_gpio_irq_of_init(struct device_node *node, struct device_node *
 	}
 
 	pr_info("%d to %d gpio interrupt mux initialized\n",
-		ctl->params->nr_hwirq, NUM_CHANNEL);
+		ctl->params->nr_hwirq, ctl->params->nr_channels);
 
 	return 0;