summaryrefslogtreecommitdiffstats
path: root/drivers/irqchip/irq-renesas-intc-irqpin.c
diff options
context:
space:
mode:
authorMagnus Damm <damm+renesas@opensource.se>2014-12-03 21:18:03 +0900
committerThomas Gleixner <tglx@linutronix.de>2015-01-26 11:38:22 +0100
commite03f9088e22ca7e2b0de826466540e2527518e52 (patch)
tree78e192dab008ea8852d9fb57836338d160ed96af /drivers/irqchip/irq-renesas-intc-irqpin.c
parent64c96a57b73397415eafa4ac2020ea7d99d7168c (diff)
downloadlinux-e03f9088e22ca7e2b0de826466540e2527518e52.tar.bz2
irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support
Add r8a7779 specific support for IRLM bit configuration in the INTC-IRQPIN driver. Without this code we need special workaround code in arch/arm/mach-shmobile. The IRLM bit for the INTC hardware exists on various older SH-based SoCs and is used to select between two modes for the external interrupt pins IRQ0 to IRQ3: IRLM = 0: (default from reset on r8a7779) In this mode the pins IRQ0 to IRQ3 are used together to give a value between 0 and 15 to the SoC. External logic is required for masking. This mode is not supported by the INTC-IRQPIN driver. IRLM = 1: (needs this patch or configuration elsewhere) In this mode IRQ0 to IRQ3 operate as 4 individual external interrupt pins. In this mode the SMSC ethernet chip can be used via IRQ1 on r8a7779 Marzen. This mode is the only supported mode by the INTC-IRQPIN driver. For this patch to work the r8a7779 DTS needs to pass the ICR0 register as the last register bank. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: horms@verge.net.au Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/20141203121803.5936.35881.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Diffstat (limited to 'drivers/irqchip/irq-renesas-intc-irqpin.c')
-rw-r--r--drivers/irqchip/irq-renesas-intc-irqpin.c50
1 files changed, 41 insertions, 9 deletions
diff --git a/drivers/irqchip/irq-renesas-intc-irqpin.c b/drivers/irqchip/irq-renesas-intc-irqpin.c
index 078cac5e2d08..9a0767b9c89d 100644
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
@@ -30,6 +30,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/pm_runtime.h>
@@ -40,7 +41,9 @@
#define INTC_IRQPIN_REG_SOURCE 2 /* INTREQnn */
#define INTC_IRQPIN_REG_MASK 3 /* INTMSKnn */
#define INTC_IRQPIN_REG_CLEAR 4 /* INTMSKCLRnn */
-#define INTC_IRQPIN_REG_NR 5
+#define INTC_IRQPIN_REG_NR_MANDATORY 5
+#define INTC_IRQPIN_REG_IRLM 5 /* ICR0 with IRLM bit (optional) */
+#define INTC_IRQPIN_REG_NR 6
/* INTC external IRQ PIN hardware register access:
*
@@ -82,6 +85,10 @@ struct intc_irqpin_priv {
u8 shared_irq_mask;
};
+struct intc_irqpin_irlm_config {
+ unsigned int irlm_bit;
+};
+
static unsigned long intc_irqpin_read32(void __iomem *iomem)
{
return ioread32(iomem);
@@ -345,10 +352,23 @@ static struct irq_domain_ops intc_irqpin_irq_domain_ops = {
.xlate = irq_domain_xlate_twocell,
};
+static const struct intc_irqpin_irlm_config intc_irqpin_irlm_r8a7779 = {
+ .irlm_bit = 23, /* ICR0.IRLM0 */
+};
+
+static const struct of_device_id intc_irqpin_dt_ids[] = {
+ { .compatible = "renesas,intc-irqpin", },
+ { .compatible = "renesas,intc-irqpin-r8a7779",
+ .data = &intc_irqpin_irlm_r8a7779 },
+ {},
+};
+MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
+
static int intc_irqpin_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct renesas_intc_irqpin_config *pdata = dev->platform_data;
+ const struct of_device_id *of_id;
struct intc_irqpin_priv *p;
struct intc_irqpin_iomem *i;
struct resource *io[INTC_IRQPIN_REG_NR];
@@ -391,10 +411,11 @@ static int intc_irqpin_probe(struct platform_device *pdev)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
- /* get hold of manadatory IOMEM */
+ /* get hold of register banks */
+ memset(io, 0, sizeof(io));
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
io[k] = platform_get_resource(pdev, IORESOURCE_MEM, k);
- if (!io[k]) {
+ if (!io[k] && k < INTC_IRQPIN_REG_NR_MANDATORY) {
dev_err(dev, "not enough IOMEM resources\n");
ret = -EINVAL;
goto err0;
@@ -422,6 +443,10 @@ static int intc_irqpin_probe(struct platform_device *pdev)
for (k = 0; k < INTC_IRQPIN_REG_NR; k++) {
i = &p->iomem[k];
+ /* handle optional registers */
+ if (!io[k])
+ continue;
+
switch (resource_size(io[k])) {
case 1:
i->width = 8;
@@ -448,6 +473,19 @@ static int intc_irqpin_probe(struct platform_device *pdev)
}
}
+ /* configure "individual IRQ mode" where needed */
+ of_id = of_match_device(intc_irqpin_dt_ids, dev);
+ if (of_id && of_id->data) {
+ const struct intc_irqpin_irlm_config *irlm_config = of_id->data;
+
+ if (io[INTC_IRQPIN_REG_IRLM])
+ intc_irqpin_read_modify_write(p, INTC_IRQPIN_REG_IRLM,
+ irlm_config->irlm_bit,
+ 1, 1);
+ else
+ dev_warn(dev, "unable to select IRLM mode\n");
+ }
+
/* mask all interrupts using priority */
for (k = 0; k < p->number_of_irqs; k++)
intc_irqpin_mask_unmask_prio(p, k, 1);
@@ -550,12 +588,6 @@ static int intc_irqpin_remove(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id intc_irqpin_dt_ids[] = {
- { .compatible = "renesas,intc-irqpin", },
- {},
-};
-MODULE_DEVICE_TABLE(of, intc_irqpin_dt_ids);
-
static struct platform_driver intc_irqpin_device_driver = {
.probe = intc_irqpin_probe,
.remove = intc_irqpin_remove,