[ARM] 5184/1: Split ucb1400_ts into core and touchscreen

This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core.
Since this chip supports more features than only touchscreen,
it was necessary to prepare it for feature addition. The
previous functionality is preserved by applying this patch.

[Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai]

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

2 files changed, 135 insertions, 248 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6e60a97a234c..fcabff9b39b1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -220,6 +220,7 @@ config TOUCHSCREEN_ATMEL_TSADCC
 config TOUCHSCREEN_UCB1400
 	tristate "Philips UCB1400 touchscreen"
 	select AC97_BUS
+	depends on UCB1400_CORE
 	help
 	  This enables support for the Philips UCB1400 touchscreen interface.
 	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index bce018e45bce..54986627def0 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -5,6 +5,10 @@
  *  Created:	September 25, 2006
  *  Copyright:	MontaVista Software, Inc.
  *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesnt work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -25,124 +29,16 @@
 #include <linux/slab.h>
 #include <linux/kthread.h>
 #include <linux/freezer.h>
-
-#include <sound/core.h>
-#include <sound/ac97_codec.h>
-
-
-/*
- * Interesting UCB1400 AC-link registers
- */
-
-#define UCB_IE_RIS		0x5e
-#define UCB_IE_FAL		0x60
-#define UCB_IE_STATUS		0x62
-#define UCB_IE_CLEAR		0x62
-#define UCB_IE_ADC		(1 << 11)
-#define UCB_IE_TSPX		(1 << 12)
-
-#define UCB_TS_CR		0x64
-#define UCB_TS_CR_TSMX_POW	(1 << 0)
-#define UCB_TS_CR_TSPX_POW	(1 << 1)
-#define UCB_TS_CR_TSMY_POW	(1 << 2)
-#define UCB_TS_CR_TSPY_POW	(1 << 3)
-#define UCB_TS_CR_TSMX_GND	(1 << 4)
-#define UCB_TS_CR_TSPX_GND	(1 << 5)
-#define UCB_TS_CR_TSMY_GND	(1 << 6)
-#define UCB_TS_CR_TSPY_GND	(1 << 7)
-#define UCB_TS_CR_MODE_INT	(0 << 8)
-#define UCB_TS_CR_MODE_PRES	(1 << 8)
-#define UCB_TS_CR_MODE_POS	(2 << 8)
-#define UCB_TS_CR_BIAS_ENA	(1 << 11)
-#define UCB_TS_CR_TSPX_LOW	(1 << 12)
-#define UCB_TS_CR_TSMX_LOW	(1 << 13)
-
-#define UCB_ADC_CR		0x66
-#define UCB_ADC_SYNC_ENA	(1 << 0)
-#define UCB_ADC_VREFBYP_CON	(1 << 1)
-#define UCB_ADC_INP_TSPX	(0 << 2)
-#define UCB_ADC_INP_TSMX	(1 << 2)
-#define UCB_ADC_INP_TSPY	(2 << 2)
-#define UCB_ADC_INP_TSMY	(3 << 2)
-#define UCB_ADC_INP_AD0		(4 << 2)
-#define UCB_ADC_INP_AD1		(5 << 2)
-#define UCB_ADC_INP_AD2		(6 << 2)
-#define UCB_ADC_INP_AD3		(7 << 2)
-#define UCB_ADC_EXT_REF		(1 << 5)
-#define UCB_ADC_START		(1 << 7)
-#define UCB_ADC_ENA		(1 << 15)
-
-#define UCB_ADC_DATA		0x68
-#define UCB_ADC_DAT_VALID	(1 << 15)
-#define UCB_ADC_DAT_VALUE(x)	((x) & 0x3ff)
-
-#define UCB_ID			0x7e
-#define UCB_ID_1400             0x4304
-
-
-struct ucb1400 {
-	struct snd_ac97		*ac97;
-	struct input_dev	*ts_idev;
-
-	int			irq;
-
-	wait_queue_head_t	ts_wait;
-	struct task_struct	*ts_task;
-
-	unsigned int		irq_pending;	/* not bit field shared */
-	unsigned int		ts_restart:1;
-	unsigned int		adcsync:1;
-};
+#include <linux/ucb1400.h>
 
 static int adcsync;
 static int ts_delay = 55; /* us */
 static int ts_delay_pressure;	/* us */
 
-static inline u16 ucb1400_reg_read(struct ucb1400 *ucb, u16 reg)
-{
-	return ucb->ac97->bus->ops->read(ucb->ac97, reg);
-}
-
-static inline void ucb1400_reg_write(struct ucb1400 *ucb, u16 reg, u16 val)
-{
-	ucb->ac97->bus->ops->write(ucb->ac97, reg, val);
-}
-
-static inline void ucb1400_adc_enable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-}
-
-static unsigned int ucb1400_adc_read(struct ucb1400 *ucb, u16 adc_channel)
-{
-	unsigned int val;
-
-	if (ucb->adcsync)
-		adc_channel |= UCB_ADC_SYNC_ENA;
-
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | adc_channel | UCB_ADC_START);
-
-	for (;;) {
-		val = ucb1400_reg_read(ucb, UCB_ADC_DATA);
-		if (val & UCB_ADC_DAT_VALID)
-			break;
-		/* yield to other processes */
-		schedule_timeout_uninterruptible(1);
-	}
-
-	return UCB_ADC_DAT_VALUE(val);
-}
-
-static inline void ucb1400_adc_disable(struct ucb1400 *ucb)
-{
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
-}
-
 /* Switch to interrupt mode. */
-static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
+static inline void ucb1400_ts_mode_int(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_INT);
@@ -152,14 +48,14 @@ static inline void ucb1400_ts_mode_int(struct ucb1400 *ucb)
  * Switch to pressure mode, and read pressure.  We don't need to wait
  * here, since both plates are being driven.
  */
-static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
 	udelay(ts_delay_pressure);
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -168,21 +64,21 @@ static inline unsigned int ucb1400_ts_read_pressure(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPY);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
 }
 
 /*
@@ -191,63 +87,63 @@ static inline unsigned int ucb1400_ts_read_xpos(struct ucb1400 *ucb)
  * gives a faster response time.  Even so, we need to wait about 55us
  * for things to stabilise.
  */
-static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
 
 	udelay(ts_delay);
 
-	return ucb1400_adc_read(ucb, UCB_ADC_INP_TSPX);
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
 }
 
 /*
  * Switch to X plate resistance mode.  Set MX to ground, PX to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_xres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
 /*
  * Switch to Y plate resistance mode.  Set MY to ground, PY to
  * supply.  Measure current.
  */
-static inline unsigned int ucb1400_ts_read_yres(struct ucb1400 *ucb)
+static inline unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
 {
-	ucb1400_reg_write(ucb, UCB_TS_CR,
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
 			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
 			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
-	return ucb1400_adc_read(ucb, 0);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
 }
 
-static inline int ucb1400_ts_pen_down(struct ucb1400 *ucb)
+static inline int ucb1400_ts_pen_down(struct snd_ac97 *ac97)
 {
-	unsigned short val = ucb1400_reg_read(ucb, UCB_TS_CR);
-	return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+	unsigned short val = ucb1400_reg_read(ac97, UCB_TS_CR);
+	return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
 }
 
-static inline void ucb1400_ts_irq_enable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_enable(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, UCB_IE_TSPX);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_TSPX);
+	ucb1400_reg_write(ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+	ucb1400_reg_write(ac97, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ac97, UCB_IE_FAL, UCB_IE_TSPX);
 }
 
-static inline void ucb1400_ts_irq_disable(struct ucb1400 *ucb)
+static inline void ucb1400_ts_irq_disable(struct snd_ac97 *ac97)
 {
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ac97, UCB_IE_FAL, 0);
 }
 
 static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 y)
@@ -264,25 +160,24 @@ static void ucb1400_ts_event_release(struct input_dev *idev)
 	input_sync(idev);
 }
 
-static void ucb1400_handle_pending_irq(struct ucb1400 *ucb)
+static void ucb1400_handle_pending_irq(struct ucb1400_ts *ucb)
 {
 	unsigned int isr;
 
-	isr = ucb1400_reg_read(ucb, UCB_IE_STATUS);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, isr);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
-	if (isr & UCB_IE_TSPX)
-		ucb1400_ts_irq_disable(ucb);
-	else
+	if (isr & UCB_IE_TSPX) {
+		ucb1400_ts_irq_disable(ucb->ac97);
+		enable_irq(ucb->irq);
+	} else
 		printk(KERN_ERR "ucb1400: unexpected IE_STATUS = %#x\n", isr);
-
-	enable_irq(ucb->irq);
 }
 
 static int ucb1400_ts_thread(void *_ucb)
 {
-	struct ucb1400 *ucb = _ucb;
+	struct ucb1400_ts *ucb = _ucb;
 	struct task_struct *tsk = current;
 	int valid = 0;
 	struct sched_param param = { .sched_priority = 1 };
@@ -301,19 +196,19 @@ static int ucb1400_ts_thread(void *_ucb)
 			ucb1400_handle_pending_irq(ucb);
 		}
 
-		ucb1400_adc_enable(ucb);
+		ucb1400_adc_enable(ucb->ac97);
 		x = ucb1400_ts_read_xpos(ucb);
 		y = ucb1400_ts_read_ypos(ucb);
 		p = ucb1400_ts_read_pressure(ucb);
-		ucb1400_adc_disable(ucb);
+		ucb1400_adc_disable(ucb->ac97);
 
 		/* Switch back to interrupt mode. */
-		ucb1400_ts_mode_int(ucb);
+		ucb1400_ts_mode_int(ucb->ac97);
 
 		msleep(10);
 
-		if (ucb1400_ts_pen_down(ucb)) {
-			ucb1400_ts_irq_enable(ucb);
+		if (ucb1400_ts_pen_down(ucb->ac97)) {
+			ucb1400_ts_irq_enable(ucb->ac97);
 
 			/*
 			 * If we spat out a valid sample set last time,
@@ -332,8 +227,8 @@ static int ucb1400_ts_thread(void *_ucb)
 		}
 
 		wait_event_freezable_timeout(ucb->ts_wait,
-			ucb->irq_pending || ucb->ts_restart || kthread_should_stop(),
-			timeout);
+			ucb->irq_pending || ucb->ts_restart ||
+			kthread_should_stop(), timeout);
 	}
 
 	/* Send the "pen off" if we are stopping with the pen still active */
@@ -356,7 +251,7 @@ static int ucb1400_ts_thread(void *_ucb)
  */
 static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 {
-	struct ucb1400 *ucb = devid;
+	struct ucb1400_ts *ucb = devid;
 
 	if (irqnr == ucb->irq) {
 		disable_irq(ucb->irq);
@@ -369,7 +264,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
 
 static int ucb1400_ts_open(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
 	int ret = 0;
 
 	BUG_ON(ucb->ts_task);
@@ -385,34 +280,14 @@ static int ucb1400_ts_open(struct input_dev *idev)
 
 static void ucb1400_ts_close(struct input_dev *idev)
 {
-	struct ucb1400 *ucb = input_get_drvdata(idev);
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
 
 	if (ucb->ts_task)
 		kthread_stop(ucb->ts_task);
 
-	ucb1400_ts_irq_disable(ucb);
-	ucb1400_reg_write(ucb, UCB_TS_CR, 0);
-}
-
-#ifdef CONFIG_PM
-static int ucb1400_ts_resume(struct device *dev)
-{
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
-
-	if (ucb->ts_task) {
-		/*
-		 * Restart the TS thread to ensure the
-		 * TS interrupt mode is set up again
-		 * after sleep.
-		 */
-		ucb->ts_restart = 1;
-		wake_up(&ucb->ts_wait);
-	}
-	return 0;
+	ucb1400_ts_irq_disable(ucb->ac97);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
 }
-#else
-#define ucb1400_ts_resume NULL
-#endif
 
 #ifndef NO_IRQ
 #define NO_IRQ	0
@@ -422,25 +297,26 @@ static int ucb1400_ts_resume(struct device *dev)
  * Try to probe our interrupt, rather than relying on lots of
  * hard-coded machine dependencies.
  */
-static int ucb1400_detect_irq(struct ucb1400 *ucb)
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb)
 {
 	unsigned long mask, timeout;
 
 	mask = probe_irq_on();
 
 	/* Enable the ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Cause an ADC interrupt. */
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
-	ucb1400_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
 
 	/* Wait for the conversion to complete. */
 	timeout = jiffies + HZ/2;
-	while (!(ucb1400_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VALID)) {
+	while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+						UCB_ADC_DAT_VALID)) {
 		cpu_relax();
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "ucb1400: timed out in IRQ probe\n");
@@ -448,13 +324,13 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 			return -ENODEV;
 		}
 	}
-	ucb1400_reg_write(ucb, UCB_ADC_CR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
 
 	/* Disable and clear interrupt. */
-	ucb1400_reg_write(ucb, UCB_IE_RIS, 0);
-	ucb1400_reg_write(ucb, UCB_IE_FAL, 0);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
-	ucb1400_reg_write(ucb, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
 
 	/* Read triggered interrupt. */
 	ucb->irq = probe_irq_off(mask);
@@ -464,36 +340,25 @@ static int ucb1400_detect_irq(struct ucb1400 *ucb)
 	return 0;
 }
 
-static int ucb1400_ts_probe(struct device *dev)
+static int ucb1400_ts_probe(struct platform_device *dev)
 {
-	struct ucb1400 *ucb;
-	struct input_dev *idev;
-	int error, id, x_res, y_res;
+	int error, x_res, y_res;
+	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
-	ucb = kzalloc(sizeof(struct ucb1400), GFP_KERNEL);
-	idev = input_allocate_device();
-	if (!ucb || !idev) {
+	ucb->ts_idev = input_allocate_device();
+	if (!ucb->ts_idev) {
 		error = -ENOMEM;
-		goto err_free_devs;
+		goto err;
 	}
 
-	ucb->ts_idev = idev;
-	ucb->adcsync = adcsync;
-	ucb->ac97 = to_ac97_t(dev);
-	init_waitqueue_head(&ucb->ts_wait);
-
-	id = ucb1400_reg_read(ucb, UCB_ID);
-	if (id != UCB_ID_1400) {
-		error = -ENODEV;
-		goto err_free_devs;
-	}
-
-	error = ucb1400_detect_irq(ucb);
+	error = ucb1400_ts_detect_irq(ucb);
 	if (error) {
 		printk(KERN_ERR "UCB1400: IRQ probe failed\n");
 		goto err_free_devs;
 	}
 
+	init_waitqueue_head(&ucb->ts_wait);
+
 	error = request_irq(ucb->irq, ucb1400_hard_irq, IRQF_TRIGGER_RISING,
 				"UCB1400", ucb);
 	if (error) {
@@ -503,80 +368,101 @@ static int ucb1400_ts_probe(struct device *dev)
 	}
 	printk(KERN_DEBUG "UCB1400: found IRQ %d\n", ucb->irq);
 
-	input_set_drvdata(idev, ucb);
+	input_set_drvdata(ucb->ts_idev, ucb);
 
-	idev->dev.parent	= dev;
-	idev->name		= "UCB1400 touchscreen interface";
-	idev->id.vendor		= ucb1400_reg_read(ucb, AC97_VENDOR_ID1);
-	idev->id.product	= id;
-	idev->open		= ucb1400_ts_open;
-	idev->close		= ucb1400_ts_close;
-	idev->evbit[0]		= BIT_MASK(EV_ABS);
+	ucb->ts_idev->dev.parent	= &dev->dev;
+	ucb->ts_idev->name		= "UCB1400 touchscreen interface";
+	ucb->ts_idev->id.vendor		= ucb1400_reg_read(ucb->ac97,
+						AC97_VENDOR_ID1);
+	ucb->ts_idev->id.product	= ucb->id;
+	ucb->ts_idev->open		= ucb1400_ts_open;
+	ucb->ts_idev->close		= ucb1400_ts_close;
+	ucb->ts_idev->evbit[0]		= BIT_MASK(EV_ABS);
 
-	ucb1400_adc_enable(ucb);
+	ucb1400_adc_enable(ucb->ac97);
 	x_res = ucb1400_ts_read_xres(ucb);
 	y_res = ucb1400_ts_read_yres(ucb);
-	ucb1400_adc_disable(ucb);
+	ucb1400_adc_disable(ucb->ac97);
 	printk(KERN_DEBUG "UCB1400: x/y = %d/%d\n", x_res, y_res);
 
-	input_set_abs_params(idev, ABS_X, 0, x_res, 0, 0);
-	input_set_abs_params(idev, ABS_Y, 0, y_res, 0, 0);
-	input_set_abs_params(idev, ABS_PRESSURE, 0, 0, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
 
-	error = input_register_device(idev);
+	error = input_register_device(ucb->ts_idev);
 	if (error)
 		goto err_free_irq;
 
-	dev_set_drvdata(dev, ucb);
 	return 0;
 
- err_free_irq:
+err_free_irq:
 	free_irq(ucb->irq, ucb);
- err_free_devs:
-	input_free_device(idev);
-	kfree(ucb);
+err_free_devs:
+	input_free_device(ucb->ts_idev);
+err:
 	return error;
+
 }
 
-static int ucb1400_ts_remove(struct device *dev)
+static int ucb1400_ts_remove(struct platform_device *dev)
 {
-	struct ucb1400 *ucb = dev_get_drvdata(dev);
+	struct ucb1400_ts *ucb = dev->dev.platform_data;
 
 	free_irq(ucb->irq, ucb);
 	input_unregister_device(ucb->ts_idev);
-	dev_set_drvdata(dev, NULL);
-	kfree(ucb);
 	return 0;
 }
 
-static struct device_driver ucb1400_ts_driver = {
-	.name		= "ucb1400_ts",
-	.owner		= THIS_MODULE,
-	.bus		= &ac97_bus_type,
-	.probe		= ucb1400_ts_probe,
-	.remove		= ucb1400_ts_remove,
-	.resume		= ucb1400_ts_resume,
+#ifdef CONFIG_PM
+static int ucb1400_ts_resume(struct platform_device *dev)
+{
+	struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+
+	if (ucb->ts_task) {
+		/*
+		 * Restart the TS thread to ensure the
+		 * TS interrupt mode is set up again
+		 * after sleep.
+		 */
+		ucb->ts_restart = 1;
+		wake_up(&ucb->ts_wait);
+	}
+	return 0;
+}
+#else
+#define ucb1400_ts_resume NULL
+#endif
+
+static struct platform_driver ucb1400_ts_driver = {
+	.probe	= ucb1400_ts_probe,
+	.remove	= ucb1400_ts_remove,
+	.resume	= ucb1400_ts_resume,
+	.driver	= {
+		.name	= "ucb1400_ts",
+	},
 };
 
 static int __init ucb1400_ts_init(void)
 {
-	return driver_register(&ucb1400_ts_driver);
+	return platform_driver_register(&ucb1400_ts_driver);
 }
 
 static void __exit ucb1400_ts_exit(void)
 {
-	driver_unregister(&ucb1400_ts_driver);
+	platform_driver_unregister(&ucb1400_ts_driver);
 }
 
 module_param(adcsync, bool, 0444);
 MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
 
 module_param(ts_delay, int, 0444);
-MODULE_PARM_DESC(ts_delay, "Delay between panel setup and position read. Default = 55us.");
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+			    " position read. Default = 55us.");
 
 module_param(ts_delay_pressure, int, 0444);
 MODULE_PARM_DESC(ts_delay_pressure,
-		  "delay between panel setup and pressure read.  Default = 0us.");
+		"delay between panel setup and pressure read."
+		"  Default = 0us.");
 
 module_init(ucb1400_ts_init);
 module_exit(ucb1400_ts_exit);