diff options
author | Jeff LaBundy <jeff@labundy.com> | 2019-04-30 00:16:11 -0700 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2019-04-30 00:38:51 -0700 |
commit | 7b5bb55d0dad859ee5bb41b1664e2ac577378c38 (patch) | |
tree | f968a59db9672f575a54cddb9d479a2c8096eb80 /drivers/input/touchscreen/iqs5xx.c | |
parent | 13bda2d07791d0093728aed7698e76d2977e7639 (diff) | |
download | linux-7b5bb55d0dad859ee5bb41b1664e2ac577378c38.tar.bz2 |
Input: add support for Azoteq IQS550/572/525
This patch adds support for the Azoteq IQS550/572/525 family of
trackpad/touchscreen controllers.
The driver has been tested with an IQS550EV02 evaluation board. A
demonstration of the driver's capabilities is available here:
https://youtu.be/sRNNx4XZBts
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Diffstat (limited to 'drivers/input/touchscreen/iqs5xx.c')
-rw-r--r-- | drivers/input/touchscreen/iqs5xx.c | 1133 |
1 files changed, 1133 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/iqs5xx.c b/drivers/input/touchscreen/iqs5xx.c new file mode 100644 index 000000000000..b832fe062645 --- /dev/null +++ b/drivers/input/touchscreen/iqs5xx.c @@ -0,0 +1,1133 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Azoteq IQS550/572/525 Trackpad/Touchscreen Controller + * + * Copyright (C) 2018 + * Author: Jeff LaBundy <jeff@labundy.com> + * + * These devices require firmware exported from a PC-based configuration tool + * made available by the vendor. Firmware files may be pushed to the device's + * nonvolatile memory by writing the filename to the 'fw_file' sysfs control. + * + * Link to PC-based configuration tool and data sheet: http://www.azoteq.com/ + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/firmware.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/slab.h> +#include <asm/unaligned.h> + +#define IQS5XX_FW_FILE_LEN 64 +#define IQS5XX_NUM_RETRIES 10 +#define IQS5XX_NUM_POINTS 256 +#define IQS5XX_NUM_CONTACTS 5 +#define IQS5XX_WR_BYTES_MAX 2 + +#define IQS5XX_PROD_NUM_IQS550 40 +#define IQS5XX_PROD_NUM_IQS572 58 +#define IQS5XX_PROD_NUM_IQS525 52 +#define IQS5XX_PROJ_NUM_A000 0 +#define IQS5XX_PROJ_NUM_B000 15 +#define IQS5XX_MAJOR_VER_MIN 2 + +#define IQS5XX_RESUME 0x00 +#define IQS5XX_SUSPEND 0x01 + +#define IQS5XX_SW_INPUT_EVENT 0x10 +#define IQS5XX_SETUP_COMPLETE 0x40 +#define IQS5XX_EVENT_MODE 0x01 +#define IQS5XX_TP_EVENT 0x04 + +#define IQS5XX_FLIP_X 0x01 +#define IQS5XX_FLIP_Y 0x02 +#define IQS5XX_SWITCH_XY_AXIS 0x04 + +#define IQS5XX_PROD_NUM 0x0000 +#define IQS5XX_ABS_X 0x0016 +#define IQS5XX_ABS_Y 0x0018 +#define IQS5XX_SYS_CTRL0 0x0431 +#define IQS5XX_SYS_CTRL1 0x0432 +#define IQS5XX_SYS_CFG0 0x058E +#define IQS5XX_SYS_CFG1 0x058F +#define IQS5XX_TOTAL_RX 0x063D +#define IQS5XX_TOTAL_TX 0x063E +#define IQS5XX_XY_CFG0 0x0669 +#define IQS5XX_X_RES 0x066E +#define IQS5XX_Y_RES 0x0670 +#define IQS5XX_CHKSM 0x83C0 +#define IQS5XX_APP 0x8400 +#define IQS5XX_CSTM 0xBE00 +#define IQS5XX_PMAP_END 0xBFFF +#define IQS5XX_END_COMM 0xEEEE + +#define IQS5XX_CHKSM_LEN (IQS5XX_APP - IQS5XX_CHKSM) +#define IQS5XX_APP_LEN (IQS5XX_CSTM - IQS5XX_APP) +#define IQS5XX_CSTM_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CSTM) +#define IQS5XX_PMAP_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CHKSM) + +#define IQS5XX_REC_HDR_LEN 4 +#define IQS5XX_REC_LEN_MAX 255 +#define IQS5XX_REC_TYPE_DATA 0x00 +#define IQS5XX_REC_TYPE_EOF 0x01 + +#define IQS5XX_BL_ADDR_MASK 0x40 +#define IQS5XX_BL_CMD_VER 0x00 +#define IQS5XX_BL_CMD_READ 0x01 +#define IQS5XX_BL_CMD_EXEC 0x02 +#define IQS5XX_BL_CMD_CRC 0x03 +#define IQS5XX_BL_BLK_LEN_MAX 64 +#define IQS5XX_BL_ID 0x0200 +#define IQS5XX_BL_STATUS_RESET 0x00 +#define IQS5XX_BL_STATUS_AVAIL 0xA5 +#define IQS5XX_BL_STATUS_NONE 0xEE +#define IQS5XX_BL_CRC_PASS 0x00 +#define IQS5XX_BL_CRC_FAIL 0x01 +#define IQS5XX_BL_ATTEMPTS 3 + +struct iqs5xx_private { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *reset_gpio; + struct mutex lock; + u8 bl_status; +}; + +struct iqs5xx_dev_id_info { + __be16 prod_num; + __be16 proj_num; + u8 major_ver; + u8 minor_ver; + u8 bl_status; +} __packed; + +struct iqs5xx_ihex_rec { + char start; + char len[2]; + char addr[4]; + char type[2]; + char data[2]; +} __packed; + +struct iqs5xx_touch_data { + __be16 abs_x; + __be16 abs_y; + __be16 strength; + u8 area; +} __packed; + +static int iqs5xx_read_burst(struct i2c_client *client, + u16 reg, void *val, u16 len) +{ + __be16 reg_buf = cpu_to_be16(reg); + int ret, i; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = sizeof(reg_buf), + .buf = (u8 *)®_buf, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = (u8 *)val, + }, + }; + + /* + * The first addressing attempt outside of a communication window fails + * and must be retried, after which the device clock stretches until it + * is available. + */ + for (i = 0; i < IQS5XX_NUM_RETRIES; i++) { + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret == ARRAY_SIZE(msg)) + return 0; + + usleep_range(200, 300); + } + + if (ret >= 0) + ret = -EIO; + + dev_err(&client->dev, "Failed to read from address 0x%04X: %d\n", + reg, ret); + + return ret; +} + +static int iqs5xx_read_word(struct i2c_client *client, u16 reg, u16 *val) +{ + __be16 val_buf; + int error; + + error = iqs5xx_read_burst(client, reg, &val_buf, sizeof(val_buf)); + if (error) + return error; + + *val = be16_to_cpu(val_buf); + + return 0; +} + +static int iqs5xx_read_byte(struct i2c_client *client, u16 reg, u8 *val) +{ + return iqs5xx_read_burst(client, reg, val, sizeof(*val)); +} + +static int iqs5xx_write_burst(struct i2c_client *client, + u16 reg, const void *val, u16 len) +{ + int ret, i; + u16 mlen = sizeof(reg) + len; + u8 mbuf[sizeof(reg) + IQS5XX_WR_BYTES_MAX]; + + if (len > IQS5XX_WR_BYTES_MAX) + return -EINVAL; + + put_unaligned_be16(reg, mbuf); + memcpy(mbuf + sizeof(reg), val, len); + + /* + * The first addressing attempt outside of a communication window fails + * and must be retried, after which the device clock stretches until it + * is available. + */ + for (i = 0; i < IQS5XX_NUM_RETRIES; i++) { + ret = i2c_master_send(client, mbuf, mlen); + if (ret == mlen) + return 0; + + usleep_range(200, 300); + } + + if (ret >= 0) + ret = -EIO; + + dev_err(&client->dev, "Failed to write to address 0x%04X: %d\n", + reg, ret); + + return ret; +} + +static int iqs5xx_write_word(struct i2c_client *client, u16 reg, u16 val) +{ + __be16 val_buf = cpu_to_be16(val); + + return iqs5xx_write_burst(client, reg, &val_buf, sizeof(val_buf)); +} + +static int iqs5xx_write_byte(struct i2c_client *client, u16 reg, u8 val) +{ + return iqs5xx_write_burst(client, reg, &val, sizeof(val)); +} + +static void iqs5xx_reset(struct i2c_client *client) +{ + struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); + + gpiod_set_value_cansleep(iqs5xx->reset_gpio, 1); + usleep_range(200, 300); + + gpiod_set_value_cansleep(iqs5xx->reset_gpio, 0); +} + +static int iqs5xx_bl_cmd(struct i2c_client *client, u8 bl_cmd, u16 bl_addr) +{ + struct i2c_msg msg; + int ret; + u8 mbuf[sizeof(bl_cmd) + sizeof(bl_addr)]; + + msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK; + msg.flags = 0; + msg.len = sizeof(bl_cmd); + msg.buf = mbuf; + + *mbuf = bl_cmd; + + switch (bl_cmd) { + case IQS5XX_BL_CMD_VER: + case IQS5XX_BL_CMD_CRC: + case IQS5XX_BL_CMD_EXEC: + break; + case IQS5XX_BL_CMD_READ: + msg.len += sizeof(bl_addr); + put_unaligned_be16(bl_addr, mbuf + sizeof(bl_cmd)); + break; + default: + return -EINVAL; + } + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) + goto msg_fail; + + switch (bl_cmd) { + case IQS5XX_BL_CMD_VER: + msg.len = sizeof(u16); + break; + case IQS5XX_BL_CMD_CRC: + msg.len = sizeof(u8); + /* + * This delay saves the bus controller the trouble of having to + * tolerate a relatively long clock-stretching period while the + * CRC is calculated. + */ + msleep(50); + break; + case IQS5XX_BL_CMD_EXEC: + usleep_range(10000, 10100); + /* fall through */ + default: + return 0; + } + + msg.flags = I2C_M_RD; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) + goto msg_fail; + + if (bl_cmd == IQS5XX_BL_CMD_VER && + get_unaligned_be16(mbuf) != IQS5XX_BL_ID) { + dev_err(&client->dev, "Unrecognized bootloader ID: 0x%04X\n", + get_unaligned_be16(mbuf)); + return -EINVAL; + } + + if (bl_cmd == IQS5XX_BL_CMD_CRC && *mbuf != IQS5XX_BL_CRC_PASS) { + dev_err(&client->dev, "Bootloader CRC failed\n"); + return -EIO; + } + + return 0; + +msg_fail: + if (ret >= 0) + ret = -EIO; + + if (bl_cmd != IQS5XX_BL_CMD_VER) + dev_err(&client->dev, + "Unsuccessful bootloader command 0x%02X: %d\n", + bl_cmd, ret); + + return ret; +} + +static int iqs5xx_bl_open(struct i2c_client *client) +{ + int error, i, j; + + /* + * The device opens a bootloader polling window for 2 ms following the + * release of reset. If the host cannot establish communication during + * this time frame, it must cycle reset again. + */ + for (i = 0; i < IQS5XX_BL_ATTEMPTS; i++) { + iqs5xx_reset(client); + + for (j = 0; j < IQS5XX_NUM_RETRIES; j++) { + error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0); + if (!error || error == -EINVAL) + return error; + } + } + + dev_err(&client->dev, "Failed to open bootloader: %d\n", error); + + return error; +} + +static int iqs5xx_bl_write(struct i2c_client *client, + u16 bl_addr, u8 *pmap_data, u16 pmap_len) +{ + struct i2c_msg msg; + int ret, i; + u8 mbuf[sizeof(bl_addr) + IQS5XX_BL_BLK_LEN_MAX]; + + if (pmap_len % IQS5XX_BL_BLK_LEN_MAX) + return -EINVAL; + + msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK; + msg.flags = 0; + msg.len = sizeof(mbuf); + msg.buf = mbuf; + + for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) { + put_unaligned_be16(bl_addr + i, mbuf); + memcpy(mbuf + sizeof(bl_addr), pmap_data + i, + sizeof(mbuf) - sizeof(bl_addr)); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) + goto msg_fail; + + usleep_range(10000, 10100); + } + + return 0; + +msg_fail: + if (ret >= 0) + ret = -EIO; + + dev_err(&client->dev, "Failed to write block at address 0x%04X: %d\n", + bl_addr + i, ret); + + return ret; +} + +static int iqs5xx_bl_verify(struct i2c_client *client, + u16 bl_addr, u8 *pmap_data, u16 pmap_len) +{ + struct i2c_msg msg; + int ret, i; + u8 bl_data[IQS5XX_BL_BLK_LEN_MAX]; + + if (pmap_len % IQS5XX_BL_BLK_LEN_MAX) + return -EINVAL; + + msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK; + msg.flags = I2C_M_RD; + msg.len = sizeof(bl_data); + msg.buf = bl_data; + + for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) { + ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_READ, bl_addr + i); + if (ret) + return ret; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret != 1) + goto msg_fail; + + if (memcmp(bl_data, pmap_data + i, sizeof(bl_data))) { + dev_err(&client->dev, + "Failed to verify block at address 0x%04X\n", + bl_addr + i); + return -EIO; + } + } + + return 0; + +msg_fail: + if (ret >= 0) + ret = -EIO; + + dev_err(&client->dev, "Failed to read block at address 0x%04X: %d\n", + bl_addr + i, ret); + + return ret; +} + +static int iqs5xx_set_state(struct i2c_client *client, u8 state) +{ + struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); + int error1, error2; + + if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) + return 0; + + mutex_lock(&iqs5xx->lock); + + /* + * Addressing the device outside of a communication window prompts it + * to assert the RDY output, so disable the interrupt line to prevent + * the handler from servicing a false interrupt. + */ + disable_irq(client->irq); + + error1 = iqs5xx_write_byte(client, IQS5XX_SYS_CTRL1, state); + error2 = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0); + + usleep_range(50, 100); + enable_irq(client->irq); + + mutex_unlock(&iqs5xx->lock); + + if (error1) + return error1; + + return error2; +} + +static int iqs5xx_open(struct input_dev *input) +{ + struct iqs5xx_private *iqs5xx = input_get_drvdata(input); + + return iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME); +} + +static void iqs5xx_close(struct input_dev *input) +{ + struct iqs5xx_private *iqs5xx = input_get_drvdata(input); + + iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND); +} + +static int iqs5xx_axis_init(struct i2c_client *client) +{ + struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); + struct touchscreen_properties prop; + struct input_dev *input; + int error; + u16 max_x, max_x_hw; + u16 max_y, max_y_hw; + u8 val; + + if (!iqs5xx->input) { + input = devm_input_allocate_device(&client->dev); + if (!input) + return -ENOMEM; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->open = iqs5xx_open; + input->close = iqs5xx_close; + + input_set_capability(input, EV_ABS, ABS_MT_POSITION_X); + input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y); + input_set_capability(input, EV_ABS, ABS_MT_PRESSURE); + + error = input_mt_init_slots(input, + IQS5XX_NUM_CONTACTS, INPUT_MT_DIRECT); + if (error) { + dev_err(&client->dev, + "Failed to initialize slots: %d\n", error); + return error; + } + + input_set_drvdata(input, iqs5xx); + iqs5xx->input = input; + } + + touchscreen_parse_properties(iqs5xx->input, true, &prop); + + error = iqs5xx_read_byte(client, IQS5XX_TOTAL_RX, &val); + if (error) + return error; + max_x_hw = (val - 1) * IQS5XX_NUM_POINTS; + + error = iqs5xx_read_byte(client, IQS5XX_TOTAL_TX, &val); + if (error) + return error; + max_y_hw = (val - 1) * IQS5XX_NUM_POINTS; + + error = iqs5xx_read_byte(client, IQS5XX_XY_CFG0, &val); + if (error) + return error; + + if (val & IQS5XX_SWITCH_XY_AXIS) + swap(max_x_hw, max_y_hw); + + if (prop.swap_x_y) + val ^= IQS5XX_SWITCH_XY_AXIS; + + if (prop.invert_x) + val ^= prop.swap_x_y ? IQS5XX_FLIP_Y : IQS5XX_FLIP_X; + + if (prop.invert_y) + val ^= prop.swap_x_y ? IQS5XX_FLIP_X : IQS5XX_FLIP_Y; + + error = iqs5xx_write_byte(client, IQS5XX_XY_CFG0, val); + if (error) + return error; + + if (prop.max_x > max_x_hw) { + dev_err(&client->dev, "Invalid maximum x-coordinate: %u > %u\n", + prop.max_x, max_x_hw); + return -EINVAL; + } else if (prop.max_x == 0) { + error = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x); + if (error) + return error; + + input_abs_set_max(iqs5xx->input, + prop.swap_x_y ? ABS_MT_POSITION_Y : + ABS_MT_POSITION_X, + max_x); + } else { + max_x = (u16)prop.max_x; + } + + if (prop.max_y > max_y_hw) { + dev_err(&client->dev, "Invalid maximum y-coordinate: %u > %u\n", + prop.max_y, max_y_hw); + return -EINVAL; + } else if (prop.max_y == 0) { + error = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y); + if (error) + return error; + + input_abs_set_max(iqs5xx->input, + prop.swap_x_y ? ABS_MT_POSITION_X : + ABS_MT_POSITION_Y, + max_y); + } else { + max_y = (u16)prop.max_y; + } + + /* + * Write horizontal and vertical resolution to the device in case its + * original defaults were overridden or swapped as per the properties + * specified in the device tree. + */ + error = iqs5xx_write_word(client, + prop.swap_x_y ? IQS5XX_Y_RES : IQS5XX_X_RES, + max_x); + if (error) + return error; + + return iqs5xx_write_word(client, + prop.swap_x_y ? IQS5XX_X_RES : IQS5XX_Y_RES, + max_y); +} + +static int iqs5xx_dev_init(struct i2c_client *client) +{ + struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); + struct iqs5xx_dev_id_info *dev_id_info; + int error; + u8 val; + u8 buf[sizeof(*dev_id_info) + 1]; + + error = iqs5xx_read_burst(client, IQS5XX_PROD_NUM, + &buf[1], sizeof(*dev_id_info)); + if (error) + return iqs5xx_bl_open(client); + + /* + * A000 and B000 devices use 8-bit and 16-bit addressing, respectively. + * Querying an A000 device's version information with 16-bit addressing + * gives the appearance that the data is shifted by one byte; a nonzero + * leading array element suggests this could be the case (in which case + * the missing zero is prepended). + */ + buf[0] = 0; + dev_id_info = (struct iqs5xx_dev_id_info *)&buf[(buf[1] > 0) ? 0 : 1]; + + switch (be16_to_cpu(dev_id_info->prod_num)) { + case IQS5XX_PROD_NUM_IQS550: + case IQS5XX_PROD_NUM_IQS572: + case IQS5XX_PROD_NUM_IQS525: + break; + default: + dev_err(&client->dev, "Unrecognized product number: %u\n", + be16_to_cpu(dev_id_info->prod_num)); + return -EINVAL; + } + + switch (be16_to_cpu(dev_id_info->proj_num)) { + case IQS5XX_PROJ_NUM_A000: + dev_err(&client->dev, "Unsupported project number: %u\n", + be16_to_cpu(dev_id_info->proj_num)); + return iqs5xx_bl_open(client); + case IQS5XX_PROJ_NUM_B000: + break; + default: + dev_err(&client->dev, "Unrecognized project number: %u\n", + be16_to_cpu(dev_id_info->proj_num)); + return -EINVAL; + } + + if (dev_id_info->major_ver < IQS5XX_MAJOR_VER_MIN) { + dev_err(&client->dev, "Unsupported major version: %u\n", + dev_id_info->major_ver); + return iqs5xx_bl_open(client); + } + + switch (dev_id_info->bl_status) { + case IQS5XX_BL_STATUS_AVAIL: + case IQS5XX_BL_STATUS_NONE: + break; + default: + dev_err(&client->dev, + "Unrecognized bootloader status: 0x%02X\n", + dev_id_info->bl_status); + return -EINVAL; + } + + error = iqs5xx_axis_init(client); + if (error) + return error; + + error = iqs5xx_read_byte(client, IQS5XX_SYS_CFG0, &val); + if (error) + return error; + + val |= IQS5XX_SETUP_COMPLETE; + val &= ~IQS5XX_SW_INPUT_EVENT; + error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG0, val); + if (error) + return error; + + val = IQS5XX_TP_EVENT | IQS5XX_EVENT_MODE; + error = iqs5xx_write_byte(client, IQS5XX_SYS_CFG1, val); + if (error) + return error; + + error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0); + if (error) + return error; + + iqs5xx->bl_status = dev_id_info->bl_status; + + /* + * Closure of the first communication window that appears following the + * release of reset appears to kick off an initialization period during + * which further communication is met with clock stretching. The return + * from this function is delayed so that further communication attempts + * avoid this period. + */ + msleep(100); + + return 0; +} + +static irqreturn_t iqs5xx_irq(int irq, void *data) +{ + struct iqs5xx_private *iqs5xx = data; + struct iqs5xx_touch_data touch_data[IQS5XX_NUM_CONTACTS]; + struct i2c_client *client = iqs5xx->client; + struct input_dev *input = iqs5xx->input; + int error, i; + + /* + * This check is purely a precaution, as the device does not assert the + * RDY output during bootloader mode. If the device operates outside of + * bootloader mode, the input device is guaranteed to be allocated. + */ + if (iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) + return IRQ_NONE; + + error = iqs5xx_read_burst(client, IQS5XX_ABS_X, + touch_data, sizeof(touch_data)); + if (error) + return IRQ_NONE; + + for (i = 0; i < ARRAY_SIZE(touch_data); i++) { + u16 pressure = be16_to_cpu(touch_data[i].strength); + + input_mt_slot(input, i); + if (input_mt_report_slot_state(input, MT_TOOL_FINGER, + pressure != 0)) { + input_report_abs(input, ABS_MT_POSITION_X, + be16_to_cpu(touch_data[i].abs_x)); + input_report_abs(input, ABS_MT_POSITION_Y, + be16_to_cpu(touch_data[i].abs_y)); + input_report_abs(input, ABS_MT_PRESSURE, pressure); + } + } + + input_mt_sync_frame(input); + input_sync(input); + + error = iqs5xx_write_byte(client, IQS5XX_END_COMM, 0); + if (error) + return IRQ_NONE; + + /* + * Once the communication window is closed, a small delay is added to + * ensure the device's RDY output has been deasserted by the time the + * interrupt handler returns. + */ + usleep_range(50, 100); + + return IRQ_HANDLED; +} + +static int iqs5xx_fw_file_parse(struct i2c_client *client, + const char *fw_file, u8 *pmap) +{ + const struct firmware *fw; + struct iqs5xx_ihex_rec *rec; + size_t pos = 0; + int error, i; + u16 rec_num = 1; + u16 rec_addr; + u8 rec_len, rec_type, rec_chksm, chksm; + u8 rec_hdr[IQS5XX_REC_HDR_LEN]; + u8 rec_data[IQS5XX_REC_LEN_MAX]; + + /* + * Firmware exported from the vendor's configuration tool deviates from + * standard ihex as follows: (1) the checksum for records corresponding + * to user-exported settings is not recalculated, and (2) an address of + * 0xFFFF is used for the EOF record. + * + * Because the ihex2fw tool tolerates neither (1) nor (2), the slightly + * nonstandard ihex firmware is parsed directly by the driver. + */ + error = request_firmware(&fw, fw_file, &client->dev); + if (error) { + dev_err(&client->dev, "Failed to request firmware %s: %d\n", + fw_file, error); + return error; + } + + do { + if (pos + sizeof(*rec) > fw->size) { + dev_err(&client->dev, "Insufficient firmware size\n"); + error = -EINVAL; + break; + } + rec = (struct iqs5xx_ihex_rec *)(fw->data + pos); + pos += sizeof(*rec); + + if (rec->start != ':') { + dev_err(&client->dev, "Invalid start at record %u\n", + rec_num); + error = -EINVAL; + break; + } + + error = hex2bin(rec_hdr, rec->len, sizeof(rec_hdr)); + if (error) { + dev_err(&client->dev, "Invalid header at record %u\n", + rec_num); + break; + } + + rec_len = *rec_hdr; + rec_addr = get_unaligned_be16(rec_hdr + sizeof(rec_len)); + rec_type = *(rec_hdr + sizeof(rec_len) + sizeof(rec_addr)); + + if (pos + rec_len * 2 > fw->size) { + dev_err(&client->dev, "Insufficient firmware size\n"); + error = -EINVAL; + break; + } + pos += (rec_len * 2); + + error = hex2bin(rec_data, rec->data, rec_len); + if (error) { + dev_err(&client->dev, "Invalid data at record %u\n", + rec_num); + break; + } + + error = hex2bin(&rec_chksm, + rec->data + rec_len * 2, sizeof(rec_chksm)); + if (error) { + dev_err(&client->dev, "Invalid checksum at record %u\n", + rec_num); + break; + } + + chksm = 0; + for (i = 0; i < sizeof(rec_hdr); i++) + chksm += rec_hdr[i]; + for (i = 0; i < rec_len; i++) + chksm += rec_data[i]; + chksm = ~chksm + 1; + + if (chksm != rec_chksm && rec_addr < IQS5XX_CSTM) { + dev_err(&client->dev, + "Incorrect checksum at record %u\n", + rec_num); + error = -EINVAL; + break; + } + + switch (rec_type) { + case IQS5XX_REC_TYPE_DATA: + if (rec_addr < IQS5XX_CHKSM || + rec_addr > IQS5XX_PMAP_END) { + dev_err(&client->dev, + "Invalid address at record %u\n", + rec_num); + error = -EINVAL; + } else { + memcpy(pmap + rec_addr - IQS5XX_CHKSM, + rec_data, rec_len); + } + break; + case IQS5XX_REC_TYPE_EOF: + break; + default: + dev_err(&client->dev, "Invalid type at record %u\n", + rec_num); + error = -EINVAL; + } + + if (error) + break; + + rec_num++; + while (pos < fw->size) { + if (*(fw->data + pos) == ':') + break; + pos++; + } + } while (rec_type != IQS5XX_REC_TYPE_EOF); + + release_firmware(fw); + + return error; +} + +static int iqs5xx_fw_file_write(struct i2c_client *client, const char *fw_file) +{ + struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client); + int error; + u8 *pmap; + + if (iqs5xx->bl_status == IQS5XX_BL_STATUS_NONE) + return -EPERM; + + pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL); + if (!pmap) + return -ENOMEM; + + error = iqs5xx_fw_file_parse(client, fw_file, pmap); + if (error) + goto err_kfree; + + mutex_lock(&iqs5xx->lock); + + /* + * Disable the interrupt line in case the first attempt(s) to enter the + * bootloader don't happen quickly enough, in which case the device may + * assert the RDY output until the next attempt. + */ + disable_irq(client->irq); + + iqs5xx->bl_status = IQS5XX_BL_STATUS_RESET; + + error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0); + if (error) { + error = iqs5xx_bl_open(client); + if (error) + goto err_reset; + } + + error = iqs5xx_bl_write(client, IQS5XX_CHKSM, pmap, IQS5XX_PMAP_LEN); + if (error) + goto err_reset; + + error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_CRC, 0); + if (error) + goto err_reset; + + error = iqs5xx_bl_verify(client, IQS5XX_CSTM, + pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN, + IQS5XX_CSTM_LEN); + if (error) + goto err_reset; + + error = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0); + +err_reset: + if (error) { + iqs5xx_reset(client); + usleep_range(10000, 10100); + } + + error = iqs5xx_dev_init(client); + if (!error && iqs5xx->bl_status == IQS5XX_BL_STATUS_RESET) + error = -EINVAL; + + enable_irq(client->irq); + + mutex_unlock(&iqs5xx->lock); + +err_kfree: + kfree(pmap); + + return error; +} + +static ssize_t fw_file_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev); + struct i2c_client *client = iqs5xx->client; + size_t len = count; + bool input_reg = !iqs5xx->input; + char fw_file[IQS5XX_FW_FILE_LEN + 1]; + int error; + + if (!len) + return -EINVAL; + + if (buf[len - 1] == '\n') + len--; + + if (len > IQS5XX_FW_FILE_LEN) + return -ENAMETOOLONG; + + memcpy(fw_file, buf, len); + fw_file[len] = '\0'; + + error = iqs5xx_fw_file_write(client, fw_file); + if (error) + return error; + + /* + * If the input device was not allocated already, it is guaranteed to + * be allocated by this point and can finally be registered. + */ + if (input_reg) { + error = input_register_device(iqs5xx->input); + if (error) { + dev_err(&client->dev, + "Failed to register device: %d\n", + error); + return error; + } + } + + return count; +} + +static DEVICE_ATTR_WO(fw_file); + +static struct attribute *iqs5xx_attrs[] = { + &dev_attr_fw_file.attr, + NULL, +}; + +static const struct attribute_group iqs5xx_attr_group = { + .attrs = iqs5xx_attrs, +}; + +static int __maybe_unused iqs5xx_suspend(struct device *dev) +{ + struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev); + struct input_dev *input = iqs5xx->input; + int error = 0; + + if (!input) + return error; + + mutex_lock(&input->mutex); + + if (input->users) + error = iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND); + + mutex_unlock(&input->mutex); + + return error; +} + +static int __maybe_unused iqs5xx_resume(struct device *dev) +{ + struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev); + struct input_dev *input = iqs5xx->input; + int error = 0; + + if (!input) + return error; + + mutex_lock(&input->mutex); + + if (input->users) + error = iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME); + + mutex_unlock(&input->mutex); + + return error; +} + +static SIMPLE_DEV_PM_OPS(iqs5xx_pm, iqs5xx_suspend, iqs5xx_resume); + +static int iqs5xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct iqs5xx_private *iqs5xx; + int error; + + iqs5xx = devm_kzalloc(&client->dev, sizeof(*iqs5xx), GFP_KERNEL); + if (!iqs5xx) + return -ENOMEM; + + dev_set_drvdata(&client->dev, iqs5xx); + + i2c_set_clientdata(client, iqs5xx); + iqs5xx->client = client; + + iqs5xx->reset_gpio = devm_gpiod_get(&client->dev, + "reset", GPIOD_OUT_LOW); + if (IS_ERR(iqs5xx->reset_gpio)) { + error = PTR_ERR(iqs5xx->reset_gpio); + dev_err(&client->dev, "Failed to request GPIO: %d\n", error); + return error; + } + + mutex_init(&iqs5xx->lock); + + iqs5xx_reset(client); + usleep_range(10000, 10100); + + error = iqs5xx_dev_init(client); + if (error) + return error; + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, iqs5xx_irq, IRQF_ONESHOT, + client->name, iqs5xx); + if (error) { + dev_err(&client->dev, "Failed to request IRQ: %d\n", error); + return error; + } + + error = devm_device_add_group(&client->dev, &iqs5xx_attr_group); + if (error) { + dev_err(&client->dev, "Failed to add attributes: %d\n", error); + return error; + } + + if (iqs5xx->input) { + error = input_register_device(iqs5xx->input); + if (error) + dev_err(&client->dev, + "Failed to register device: %d\n", + error); + } + + return error; +} + +static const struct i2c_device_id iqs5xx_id[] = { + { "iqs550", 0 }, + { "iqs572", 1 }, + { "iqs525", 2 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, iqs5xx_id); + +static const struct of_device_id iqs5xx_of_match[] = { + { .compatible = "azoteq,iqs550" }, + { .compatible = "azoteq,iqs572" }, + { .compatible = "azoteq,iqs525" }, + { } +}; +MODULE_DEVICE_TABLE(of, iqs5xx_of_match); + +static struct i2c_driver iqs5xx_i2c_driver = { + .driver = { + .name = "iqs5xx", + .of_match_table = iqs5xx_of_match, + .pm = &iqs5xx_pm, + }, + .id_table = iqs5xx_id, + .probe = iqs5xx_probe, +}; +module_i2c_driver(iqs5xx_i2c_driver); + +MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>"); +MODULE_DESCRIPTION("Azoteq IQS550/572/525 Trackpad/Touchscreen Controller"); +MODULE_LICENSE("GPL"); |