diff options
author | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2011-02-04 00:37:26 -0800 |
---|---|---|
committer | Dmitry Torokhov <dmitry.torokhov@gmail.com> | 2011-02-11 00:58:24 -0800 |
commit | 0fbc9fdb7e747500111dcc4a5f5f3ceed0360d71 (patch) | |
tree | e8b3940612b7d1e9ce272316f6f042fba0eec1da /drivers/input/touchscreen/ads7846.c | |
parent | 9ae4345a46bdb148e32a547e89ff29563a11e127 (diff) | |
download | linux-0fbc9fdb7e747500111dcc4a5f5f3ceed0360d71.tar.bz2 |
Input: ads7846 - check proper condition when freeing gpio
When driver uses custom pendown detection method gpio_pendown is not
set up and so we should not try to free it, otherwise we are presented
with:
------------[ cut here ]------------
WARNING: at drivers/gpio/gpiolib.c:1258 gpio_free+0x100/0x12c()
Modules linked in:
[<c0061208>] (unwind_backtrace+0x0/0xe4) from [<c0091f58>](warn_slowpath_common+0x4c/0x64)
[<c0091f58>] (warn_slowpath_common+0x4c/0x64) from [<c0091f88>](warn_slowpath_null+0x18/0x1c)
[<c0091f88>] (warn_slowpath_null+0x18/0x1c) from [<c024e610>](gpio_free+0x100/0x12c)
[<c024e610>] (gpio_free+0x100/0x12c) from [<c03e9fbc>](ads7846_probe+0xa38/0xc5c)
[<c03e9fbc>] (ads7846_probe+0xa38/0xc5c) from [<c02cff14>](spi_drv_probe+0x18/0x1c)
[<c02cff14>] (spi_drv_probe+0x18/0x1c) from [<c028bca4>](driver_probe_device+0xc8/0x184)
[<c028bca4>] (driver_probe_device+0xc8/0x184) from [<c028bdc8>](__driver_attach+0x68/0x8c)
[<c028bdc8>] (__driver_attach+0x68/0x8c) from [<c028b4c8>](bus_for_each_dev+0x48/0x74)
[<c028b4c8>] (bus_for_each_dev+0x48/0x74) from [<c028ae08>](bus_add_driver+0xa0/0x220)
[<c028ae08>] (bus_add_driver+0xa0/0x220) from [<c028c0c0>](driver_register+0xa8/0x134)
[<c028c0c0>] (driver_register+0xa8/0x134) from [<c0050550>](do_one_initcall+0xcc/0x1a4)
[<c0050550>] (do_one_initcall+0xcc/0x1a4) from [<c00084e4>](kernel_init+0x14c/0x214)
[<c00084e4>] (kernel_init+0x14c/0x214) from [<c005b494>](kernel_thread_exit+0x0/0x8)
---[ end trace 4053287f8a5ec18f ]---
Also rearrange ads7846_setup_pendown() to have only one exit point
returning success.
Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: Charulatha V <charu@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Diffstat (limited to 'drivers/input/touchscreen/ads7846.c')
-rw-r--r-- | drivers/input/touchscreen/ads7846.c | 38 |
1 files changed, 22 insertions, 16 deletions
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 14ea54b78e46..4bf2316e3284 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -941,28 +941,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784 struct ads7846_platform_data *pdata = spi->dev.platform_data; int err; - /* REVISIT when the irq can be triggered active-low, or if for some + /* + * REVISIT when the irq can be triggered active-low, or if for some * reason the touchscreen isn't hooked up, we don't need to access * the pendown state. */ - if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) { - dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); - return -EINVAL; - } if (pdata->get_pendown_state) { ts->get_pendown_state = pdata->get_pendown_state; - return 0; - } + } else if (gpio_is_valid(pdata->gpio_pendown)) { - err = gpio_request(pdata->gpio_pendown, "ads7846_pendown"); - if (err) { - dev_err(&spi->dev, "failed to request pendown GPIO%d\n", - pdata->gpio_pendown); - return err; - } + err = gpio_request(pdata->gpio_pendown, "ads7846_pendown"); + if (err) { + dev_err(&spi->dev, "failed to request pendown GPIO%d\n", + pdata->gpio_pendown); + return err; + } - ts->gpio_pendown = pdata->gpio_pendown; + ts->gpio_pendown = pdata->gpio_pendown; + + } else { + dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); + return -EINVAL; + } return 0; } @@ -1353,7 +1354,7 @@ static int __devinit ads7846_probe(struct spi_device *spi) err_put_regulator: regulator_put(ts->reg); err_free_gpio: - if (ts->gpio_pendown != -1) + if (!ts->get_pendown_state) gpio_free(ts->gpio_pendown); err_cleanup_filter: if (ts->filter_cleanup) @@ -1383,8 +1384,13 @@ static int __devexit ads7846_remove(struct spi_device *spi) regulator_disable(ts->reg); regulator_put(ts->reg); - if (ts->gpio_pendown != -1) + if (!ts->get_pendown_state) { + /* + * If we are not using specialized pendown method we must + * have been relying on gpio we set up ourselves. + */ gpio_free(ts->gpio_pendown); + } if (ts->filter_cleanup) ts->filter_cleanup(ts->filter_data); |