Input: gpio_tilt - delete driver

This driver was merged in 2011 as a tool for detecting the orientation
of a screen. The device driver assumes board file setup using the
platform data from <linux/input/gpio_tilt.h>. But no boards in the
kernel tree defines this platform data.

As I am faced with refactoring drivers to use GPIO descriptors and
pass decriptor tables from boards, or use the device tree device
drivers like these creates a serious problem: I cannot fix them and
cannot test them, not even compile-test them with a system actually
using it (no in-tree boardfile).

I suggest to delete this driver and rewrite it using device tree if
it is still in use on actively maintained systems.

I can also offer to rewrite it out of the blue using device tree if
someone promise to test it and help me iterate it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Patchwork-Id: 10133609
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

3 files changed, 0 insertions, 225 deletions

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 9f082a388388..4791e73839d9 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -268,20 +268,6 @@ config INPUT_GPIO_BEEPER
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio-beeper.
 
-config INPUT_GPIO_TILT_POLLED
-	tristate "Polled GPIO tilt switch"
-	depends on GPIOLIB || COMPILE_TEST
-	select INPUT_POLLDEV
-	help
-	  This driver implements support for tilt switches connected
-	  to GPIO pins that are not capable of generating interrupts.
-
-	  The list of gpios to use and the mapping of their states
-	  to specific angles is done via platform data.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called gpio_tilt_polled.
-
 config INPUT_GPIO_DECODER
 	tristate "Polled GPIO Decoder Input driver"
 	depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 4b6118d313fe..a8f61af865aa 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -36,7 +36,6 @@ obj-$(CONFIG_INPUT_DRV2665_HAPTICS)	+= drv2665.o
 obj-$(CONFIG_INPUT_DRV2667_HAPTICS)	+= drv2667.o
 obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_INPUT_GPIO_BEEPER)		+= gpio-beeper.o
-obj-$(CONFIG_INPUT_GPIO_TILT_POLLED)	+= gpio_tilt_polled.o
 obj-$(CONFIG_INPUT_GPIO_DECODER)	+= gpio_decoder.o
 obj-$(CONFIG_INPUT_HISI_POWERKEY)	+= hisi_powerkey.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
diff --git a/drivers/input/misc/gpio_tilt_polled.c b/drivers/input/misc/gpio_tilt_polled.c
deleted file mode 100644
index 6e217a45e39a..000000000000
--- a/drivers/input/misc/gpio_tilt_polled.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- *  Driver for tilt switches connected via GPIO lines
- *  not capable of generating interrupts
- *
- *  Copyright (C) 2011 Heiko Stuebner <heiko@sntech.de>
- *
- *  based on: drivers/input/keyboard/gpio_keys_polled.c
- *
- *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/input/gpio_tilt.h>
-
-#define DRV_NAME	"gpio-tilt-polled"
-
-struct gpio_tilt_polled_dev {
-	struct input_polled_dev *poll_dev;
-	struct device *dev;
-	const struct gpio_tilt_platform_data *pdata;
-
-	int last_state;
-
-	int threshold;
-	int count;
-};
-
-static void gpio_tilt_polled_poll(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-	struct input_dev *input = dev->input;
-	struct gpio_tilt_state *tilt_state = NULL;
-	int state, i;
-
-	if (tdev->count < tdev->threshold) {
-		tdev->count++;
-	} else {
-		state = 0;
-		for (i = 0; i < pdata->nr_gpios; i++)
-			state |= (!!gpio_get_value(pdata->gpios[i].gpio) << i);
-
-		if (state != tdev->last_state) {
-			for (i = 0; i < pdata->nr_states; i++)
-				if (pdata->states[i].gpios == state)
-					tilt_state = &pdata->states[i];
-
-			if (tilt_state) {
-				for (i = 0; i < pdata->nr_axes; i++)
-					input_report_abs(input,
-							 pdata->axes[i].axis,
-							 tilt_state->axes[i]);
-
-				input_sync(input);
-			}
-
-			tdev->count = 0;
-			tdev->last_state = state;
-		}
-	}
-}
-
-static void gpio_tilt_polled_open(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	if (pdata->enable)
-		pdata->enable(tdev->dev);
-
-	/* report initial state of the axes */
-	tdev->last_state = -1;
-	tdev->count = tdev->threshold;
-	gpio_tilt_polled_poll(tdev->poll_dev);
-}
-
-static void gpio_tilt_polled_close(struct input_polled_dev *dev)
-{
-	struct gpio_tilt_polled_dev *tdev = dev->private;
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	if (pdata->disable)
-		pdata->disable(tdev->dev);
-}
-
-static int gpio_tilt_polled_probe(struct platform_device *pdev)
-{
-	const struct gpio_tilt_platform_data *pdata =
-			dev_get_platdata(&pdev->dev);
-	struct device *dev = &pdev->dev;
-	struct gpio_tilt_polled_dev *tdev;
-	struct input_polled_dev *poll_dev;
-	struct input_dev *input;
-	int error, i;
-
-	if (!pdata || !pdata->poll_interval)
-		return -EINVAL;
-
-	tdev = kzalloc(sizeof(struct gpio_tilt_polled_dev), GFP_KERNEL);
-	if (!tdev) {
-		dev_err(dev, "no memory for private data\n");
-		return -ENOMEM;
-	}
-
-	error = gpio_request_array(pdata->gpios, pdata->nr_gpios);
-	if (error) {
-		dev_err(dev,
-			"Could not request tilt GPIOs: %d\n", error);
-		goto err_free_tdev;
-	}
-
-	poll_dev = input_allocate_polled_device();
-	if (!poll_dev) {
-		dev_err(dev, "no memory for polled device\n");
-		error = -ENOMEM;
-		goto err_free_gpios;
-	}
-
-	poll_dev->private = tdev;
-	poll_dev->poll = gpio_tilt_polled_poll;
-	poll_dev->poll_interval = pdata->poll_interval;
-	poll_dev->open = gpio_tilt_polled_open;
-	poll_dev->close = gpio_tilt_polled_close;
-
-	input = poll_dev->input;
-
-	input->name = pdev->name;
-	input->phys = DRV_NAME"/input0";
-	input->dev.parent = dev;
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	__set_bit(EV_ABS, input->evbit);
-	for (i = 0; i < pdata->nr_axes; i++)
-		input_set_abs_params(input, pdata->axes[i].axis,
-				     pdata->axes[i].min, pdata->axes[i].max,
-				     pdata->axes[i].fuzz, pdata->axes[i].flat);
-
-	tdev->threshold = DIV_ROUND_UP(pdata->debounce_interval,
-				       pdata->poll_interval);
-
-	tdev->poll_dev = poll_dev;
-	tdev->dev = dev;
-	tdev->pdata = pdata;
-
-	error = input_register_polled_device(poll_dev);
-	if (error) {
-		dev_err(dev, "unable to register polled device, err=%d\n",
-			error);
-		goto err_free_polldev;
-	}
-
-	platform_set_drvdata(pdev, tdev);
-
-	return 0;
-
-err_free_polldev:
-	input_free_polled_device(poll_dev);
-err_free_gpios:
-	gpio_free_array(pdata->gpios, pdata->nr_gpios);
-err_free_tdev:
-	kfree(tdev);
-
-	return error;
-}
-
-static int gpio_tilt_polled_remove(struct platform_device *pdev)
-{
-	struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
-	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
-
-	input_unregister_polled_device(tdev->poll_dev);
-	input_free_polled_device(tdev->poll_dev);
-
-	gpio_free_array(pdata->gpios, pdata->nr_gpios);
-
-	kfree(tdev);
-
-	return 0;
-}
-
-static struct platform_driver gpio_tilt_polled_driver = {
-	.probe	= gpio_tilt_polled_probe,
-	.remove	= gpio_tilt_polled_remove,
-	.driver	= {
-		.name	= DRV_NAME,
-	},
-};
-
-module_platform_driver(gpio_tilt_polled_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
-MODULE_DESCRIPTION("Polled GPIO tilt driver");
-MODULE_ALIAS("platform:" DRV_NAME);