Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 - big update to Wacom driver by Benjamin Tissoires, converting it to
   HID infrastructure and unifying USB and Bluetooth models
 - large update to ALPS driver by Hans de Goede, which adds support for
   newer touchpad models as well as cleans up and restructures the code
 - more changes to Atmel MXT driver, including device tree support
 - new driver for iPaq x3xxx touchscreen
 - driver for serial Wacom tablets
 - driver for Microchip's CAP1106
 - assorted cleanups and improvements to existing drover and input core

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits)
  Input: wacom - update the ABI doc according to latest changes
  Input: wacom - only register once the MODULE_* macros
  Input: HID - remove hid-wacom Bluetooth driver
  Input: wacom - add copyright note and bump version to 2.0
  Input: wacom - remove passing id for wacom_set_report
  Input: wacom - check for bluetooth protocol while setting OLEDs
  Input: wacom - handle Intuos 4 BT in wacom.ko
  Input: wacom - handle Graphire BT tablets in wacom.ko
  Input: wacom - prepare the driver to include BT devices
  Input: hyperv-keyboard - register as a wakeup source
  Input: imx_keypad - remove ifdef round PM methods
  Input: jornada720_ts - get rid of space indentation and use tab
  Input: jornada720_ts - switch to using managed resources
  Input: alps - Rushmore and v7 resolution support
  Input: mcs5000_ts - remove ifdef around power management methods
  Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP
  Input: ads7846 - release resources on failure for clean exit
  Input: wacom - add support for 0x12C ISDv4 sensor
  Input: atmel_mxt_ts - use deep sleep mode when stopped
  ARM: dts: am437x-gp-evm: Update binding for touchscreen size
  ...

5 files changed, 364 insertions, 33 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index f7e79b481349..a3958c63d7d5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -665,4 +665,14 @@ config KEYBOARD_CROS_EC
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_ec_keyb.
 
+config KEYBOARD_CAP1106
+	tristate "Microchip CAP1106 touch sensor"
+	depends on OF && I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable the CAP1106 touch sensor driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cap1106.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 7504ae19049d..0a3345634d79 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
+obj-$(CONFIG_KEYBOARD_CAP1106)		+= cap1106.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c
new file mode 100644
index 000000000000..f7d7a0d4ab4e
--- /dev/null
+++ b/drivers/input/keyboard/cap1106.c
@@ -0,0 +1,335 @@
+/*
+ * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor
+ *
+ * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106
+ *
+ * (c) 2014 Daniel Mack <linux@zonque.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/of_irq.h>
+#include <linux/regmap.h>
+#include <linux/i2c.h>
+#include <linux/gpio/consumer.h>
+
+#define CAP1106_REG_MAIN_CONTROL	0x00
+#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT	(6)
+#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK	(0xc0)
+#define CAP1106_REG_MAIN_CONTROL_DLSEEP		BIT(4)
+#define CAP1106_REG_GENERAL_STATUS	0x02
+#define CAP1106_REG_SENSOR_INPUT	0x03
+#define CAP1106_REG_NOISE_FLAG_STATUS	0x0a
+#define CAP1106_REG_SENOR_DELTA(X)	(0x10 + (X))
+#define CAP1106_REG_SENSITIVITY_CONTROL	0x1f
+#define CAP1106_REG_CONFIG		0x20
+#define CAP1106_REG_SENSOR_ENABLE	0x21
+#define CAP1106_REG_SENSOR_CONFIG	0x22
+#define CAP1106_REG_SENSOR_CONFIG2	0x23
+#define CAP1106_REG_SAMPLING_CONFIG	0x24
+#define CAP1106_REG_CALIBRATION		0x25
+#define CAP1106_REG_INT_ENABLE		0x26
+#define CAP1106_REG_REPEAT_RATE		0x28
+#define CAP1106_REG_MT_CONFIG		0x2a
+#define CAP1106_REG_MT_PATTERN_CONFIG	0x2b
+#define CAP1106_REG_MT_PATTERN		0x2d
+#define CAP1106_REG_RECALIB_CONFIG	0x2f
+#define CAP1106_REG_SENSOR_THRESH(X)	(0x30 + (X))
+#define CAP1106_REG_SENSOR_NOISE_THRESH	0x38
+#define CAP1106_REG_STANDBY_CHANNEL	0x40
+#define CAP1106_REG_STANDBY_CONFIG	0x41
+#define CAP1106_REG_STANDBY_SENSITIVITY	0x42
+#define CAP1106_REG_STANDBY_THRESH	0x43
+#define CAP1106_REG_CONFIG2		0x44
+#define CAP1106_REG_SENSOR_BASE_CNT(X)	(0x50 + (X))
+#define CAP1106_REG_SENSOR_CALIB	(0xb1 + (X))
+#define CAP1106_REG_SENSOR_CALIB_LSB1	0xb9
+#define CAP1106_REG_SENSOR_CALIB_LSB2	0xba
+#define CAP1106_REG_PRODUCT_ID		0xfd
+#define CAP1106_REG_MANUFACTURER_ID	0xfe
+#define CAP1106_REG_REVISION		0xff
+
+#define CAP1106_NUM_CHN 6
+#define CAP1106_PRODUCT_ID	0x55
+#define CAP1106_MANUFACTURER_ID	0x5d
+
+struct cap1106_priv {
+	struct regmap *regmap;
+	struct input_dev *idev;
+
+	/* config */
+	unsigned int keycodes[CAP1106_NUM_CHN];
+};
+
+static const struct reg_default cap1106_reg_defaults[] = {
+	{ CAP1106_REG_MAIN_CONTROL,		0x00 },
+	{ CAP1106_REG_GENERAL_STATUS,		0x00 },
+	{ CAP1106_REG_SENSOR_INPUT,		0x00 },
+	{ CAP1106_REG_NOISE_FLAG_STATUS,	0x00 },
+	{ CAP1106_REG_SENSITIVITY_CONTROL,	0x2f },
+	{ CAP1106_REG_CONFIG,			0x20 },
+	{ CAP1106_REG_SENSOR_ENABLE,		0x3f },
+	{ CAP1106_REG_SENSOR_CONFIG,		0xa4 },
+	{ CAP1106_REG_SENSOR_CONFIG2,		0x07 },
+	{ CAP1106_REG_SAMPLING_CONFIG,		0x39 },
+	{ CAP1106_REG_CALIBRATION,		0x00 },
+	{ CAP1106_REG_INT_ENABLE,		0x3f },
+	{ CAP1106_REG_REPEAT_RATE,		0x3f },
+	{ CAP1106_REG_MT_CONFIG,		0x80 },
+	{ CAP1106_REG_MT_PATTERN_CONFIG,	0x00 },
+	{ CAP1106_REG_MT_PATTERN,		0x3f },
+	{ CAP1106_REG_RECALIB_CONFIG,		0x8a },
+	{ CAP1106_REG_SENSOR_THRESH(0),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(1),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(2),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(3),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(4),		0x40 },
+	{ CAP1106_REG_SENSOR_THRESH(5),		0x40 },
+	{ CAP1106_REG_SENSOR_NOISE_THRESH,	0x01 },
+	{ CAP1106_REG_STANDBY_CHANNEL,		0x00 },
+	{ CAP1106_REG_STANDBY_CONFIG,		0x39 },
+	{ CAP1106_REG_STANDBY_SENSITIVITY,	0x02 },
+	{ CAP1106_REG_STANDBY_THRESH,		0x40 },
+	{ CAP1106_REG_CONFIG2,			0x40 },
+	{ CAP1106_REG_SENSOR_CALIB_LSB1,	0x00 },
+	{ CAP1106_REG_SENSOR_CALIB_LSB2,	0x00 },
+};
+
+static bool cap1106_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case CAP1106_REG_MAIN_CONTROL:
+	case CAP1106_REG_SENSOR_INPUT:
+	case CAP1106_REG_SENOR_DELTA(0):
+	case CAP1106_REG_SENOR_DELTA(1):
+	case CAP1106_REG_SENOR_DELTA(2):
+	case CAP1106_REG_SENOR_DELTA(3):
+	case CAP1106_REG_SENOR_DELTA(4):
+	case CAP1106_REG_SENOR_DELTA(5):
+	case CAP1106_REG_PRODUCT_ID:
+	case CAP1106_REG_MANUFACTURER_ID:
+	case CAP1106_REG_REVISION:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config cap1106_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = CAP1106_REG_REVISION,
+	.reg_defaults = cap1106_reg_defaults,
+
+	.num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults),
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = cap1106_volatile_reg,
+};
+
+static irqreturn_t cap1106_thread_func(int irq_num, void *data)
+{
+	struct cap1106_priv *priv = data;
+	unsigned int status;
+	int ret, i;
+
+	/*
+	 * Deassert interrupt. This needs to be done before reading the status
+	 * registers, which will not carry valid values otherwise.
+	 */
+	ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status);
+	if (ret < 0)
+		goto out;
+
+	for (i = 0; i < CAP1106_NUM_CHN; i++)
+		input_report_key(priv->idev, priv->keycodes[i],
+				 status & (1 << i));
+
+	input_sync(priv->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep)
+{
+	return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
+				  CAP1106_REG_MAIN_CONTROL_DLSEEP,
+				  sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0);
+}
+
+static int cap1106_input_open(struct input_dev *idev)
+{
+	struct cap1106_priv *priv = input_get_drvdata(idev);
+
+	return cap1106_set_sleep(priv, false);
+}
+
+static void cap1106_input_close(struct input_dev *idev)
+{
+	struct cap1106_priv *priv = input_get_drvdata(idev);
+
+	cap1106_set_sleep(priv, true);
+}
+
+static int cap1106_i2c_probe(struct i2c_client *i2c_client,
+			     const struct i2c_device_id *id)
+{
+	struct device *dev = &i2c_client->dev;
+	struct cap1106_priv *priv;
+	struct device_node *node;
+	int i, error, irq, gain = 0;
+	unsigned int val, rev;
+	u32 gain32, keycodes[CAP1106_NUM_CHN];
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP1106_PRODUCT_ID) {
+		dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP1106_PRODUCT_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val);
+	if (error)
+		return error;
+
+	if (val != CAP1106_MANUFACTURER_ID) {
+		dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
+			val, CAP1106_MANUFACTURER_ID);
+		return -ENODEV;
+	}
+
+	error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev);
+	i2c_set_clientdata(i2c_client, priv);
+	node = dev->of_node;
+
+	if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
+		if (is_power_of_2(gain32) && gain32 <= 8)
+			gain = ilog2(gain32);
+		else
+			dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
+	}
+
+	BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes));
+
+	/* Provide some useful defaults */
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		keycodes[i] = KEY_A + i;
+
+	of_property_read_u32_array(node, "linux,keycodes",
+				   keycodes, ARRAY_SIZE(keycodes));
+
+	for (i = 0; i < ARRAY_SIZE(keycodes); i++)
+		priv->keycodes[i] = keycodes[i];
+
+	error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL,
+				   CAP1106_REG_MAIN_CONTROL_GAIN_MASK,
+				   gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT);
+	if (error)
+		return error;
+
+	/* Disable autorepeat. The Linux input system has its own handling. */
+	error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0);
+	if (error)
+		return error;
+
+	priv->idev = devm_input_allocate_device(dev);
+	if (!priv->idev)
+		return -ENOMEM;
+
+	priv->idev->name = "CAP1106 capacitive touch sensor";
+	priv->idev->id.bustype = BUS_I2C;
+	priv->idev->evbit[0] = BIT_MASK(EV_KEY);
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, priv->idev->evbit);
+
+	for (i = 0; i < CAP1106_NUM_CHN; i++)
+		__set_bit(priv->keycodes[i], priv->idev->keybit);
+
+	priv->idev->id.vendor = CAP1106_MANUFACTURER_ID;
+	priv->idev->id.product = CAP1106_PRODUCT_ID;
+	priv->idev->id.version = rev;
+
+	priv->idev->open = cap1106_input_open;
+	priv->idev->close = cap1106_input_close;
+
+	input_set_drvdata(priv->idev, priv);
+
+	/*
+	 * Put the device in deep sleep mode for now.
+	 * ->open() will bring it back once the it is actually needed.
+	 */
+	cap1106_set_sleep(priv, true);
+
+	error = input_register_device(priv->idev);
+	if (error)
+		return error;
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq) {
+		dev_err(dev, "Unable to parse or map IRQ\n");
+		return -ENXIO;
+	}
+
+	error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func,
+					  IRQF_ONESHOT, dev_name(dev), priv);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static const struct of_device_id cap1106_dt_ids[] = {
+	{ .compatible = "microchip,cap1106", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cap1106_dt_ids);
+
+static const struct i2c_device_id cap1106_i2c_ids[] = {
+	{ "cap1106", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids);
+
+static struct i2c_driver cap1106_i2c_driver = {
+	.driver = {
+		.name	= "cap1106",
+		.owner	= THIS_MODULE,
+		.of_match_table = cap1106_dt_ids,
+	},
+	.id_table	= cap1106_i2c_ids,
+	.probe		= cap1106_i2c_probe,
+};
+
+module_i2c_driver(cap1106_i2c_driver);
+
+MODULE_ALIAS("platform:cap1106");
+MODULE_DESCRIPTION("Microchip CAP1106 driver");
+MODULE_AUTHOR("Daniel Mack <linux@zonque.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index 8280cb16260b..20a99c368d16 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -531,8 +531,7 @@ static int imx_keypad_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int imx_kbd_suspend(struct device *dev)
+static int __maybe_unused imx_kbd_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
@@ -552,7 +551,7 @@ static int imx_kbd_suspend(struct device *dev)
 	return 0;
 }
 
-static int imx_kbd_resume(struct device *dev)
+static int __maybe_unused imx_kbd_resume(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct imx_keypad *kbd = platform_get_drvdata(pdev);
@@ -575,7 +574,6 @@ err_clk:
 
 	return ret;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(imx_kbd_pm_ops, imx_kbd_suspend, imx_kbd_resume);
 
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index 430b54539720..faa6da53eba8 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -203,12 +203,17 @@ static int max7359_probe(struct i2c_client *client,
 
 	dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
 
-	keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!keypad || !input_dev) {
+	keypad = devm_kzalloc(&client->dev, sizeof(struct max7359_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
 		dev_err(&client->dev, "failed to allocate memory\n");
-		error = -ENOMEM;
-		goto failed_free_mem;
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "failed to allocate input device\n");
+		return -ENOMEM;
 	}
 
 	keypad->client = client;
@@ -230,19 +235,20 @@ static int max7359_probe(struct i2c_client *client,
 
 	max7359_build_keycode(keypad, keymap_data);
 
-	error = request_threaded_irq(client->irq, NULL, max7359_interrupt,
-				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-				     client->name, keypad);
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  max7359_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  client->name, keypad);
 	if (error) {
 		dev_err(&client->dev, "failed to register interrupt\n");
-		goto failed_free_mem;
+		return error;
 	}
 
 	/* Register the input device */
 	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&client->dev, "failed to register input device\n");
-		goto failed_free_irq;
+		return error;
 	}
 
 	/* Initialize MAX7359 */
@@ -252,24 +258,6 @@ static int max7359_probe(struct i2c_client *client,
 	device_init_wakeup(&client->dev, 1);
 
 	return 0;
-
-failed_free_irq:
-	free_irq(client->irq, keypad);
-failed_free_mem:
-	input_free_device(input_dev);
-	kfree(keypad);
-	return error;
-}
-
-static int max7359_remove(struct i2c_client *client)
-{
-	struct max7359_keypad *keypad = i2c_get_clientdata(client);
-
-	free_irq(client->irq, keypad);
-	input_unregister_device(keypad->input_dev);
-	kfree(keypad);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -313,7 +301,6 @@ static struct i2c_driver max7359_i2c_driver = {
 		.pm   = &max7359_pm,
 	},
 	.probe		= max7359_probe,
-	.remove		= max7359_remove,
 	.id_table	= max7359_ids,
 };