iio: st_sensors: decouple irq1 configuration parameters from the irq2 ones

Separate data-ready configuration parameters for INT1 and INT2 pins in
st_sensor_data_ready_irq data structure. That change will be use to
properly support LIS2DW12 accel sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

5 files changed, 94 insertions, 55 deletions

diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 140ba26f6131..a6eac959dfe8 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -159,9 +159,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x10,
-			.mask_int2 = 0x00,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
 			.addr_ihl = 0x25,
 			.mask_ihl = 0x02,
 			.stat_drdy = {
@@ -232,9 +233,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x02,
-			.mask_int2 = 0x10,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x02,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 			.addr_od = 0x22,
@@ -319,9 +325,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = 0x08,
 		},
 		.drdy_irq = {
-			.addr = 0x23,
-			.mask_int1 = 0x80,
-			.mask_int2 = 0x00,
+			.int1 = {
+				.addr = 0x23,
+				.mask = 0x80,
+			},
 			.addr_ihl = 0x23,
 			.mask_ihl = 0x40,
 			.stat_drdy = {
@@ -396,8 +403,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = 0x01,
 		},
 		.drdy_irq = {
-			.addr = 0x21,
-			.mask_int1 = 0x04,
+			.int1 = {
+				.addr = 0x21,
+				.mask = 0x04,
+			},
 			.stat_drdy = {
 				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
 				.mask = 0x07,
@@ -456,9 +465,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			},
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x04,
-			.mask_int2 = 0x20,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x04,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x20,
+			},
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 			.addr_od = 0x22,
@@ -528,9 +542,14 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x02,
-			.mask_int2 = 0x10,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x02,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 		},
@@ -582,8 +601,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.bdu = {
 		},
 		.drdy_irq = {
-			.addr = 0x21,
-			.mask_int1 = 0x04,
+			.int1 = {
+				.addr = 0x21,
+				.mask = 0x04,
+			},
 			.stat_drdy = {
 				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
 				.mask = 0x07,
@@ -653,9 +674,10 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			},
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x10,
-			.mask_int2 = 0x00,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x10,
+			},
 			.addr_ihl = 0x25,
 			.mask_ihl = 0x02,
 			.stat_drdy = {
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 34115f05d5c4..af702fa8fa84 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -283,7 +283,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
 	/* Sensor does not support interrupts */
-	if (sdata->sensor_settings->drdy_irq.addr == 0) {
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		if (pdata->drdy_int_pin)
 			dev_info(&indio_dev->dev,
 				 "DRDY on pin INT%d specified, but sensor "
@@ -294,7 +295,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 
 	switch (pdata->drdy_int_pin) {
 	case 1:
-		if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
+		if (!sdata->sensor_settings->drdy_irq.int1.mask) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT1 not available.\n");
 			return -EINVAL;
@@ -302,7 +303,7 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 		sdata->drdy_int_pin = 1;
 		break;
 	case 2:
-		if (sdata->sensor_settings->drdy_irq.mask_int2 == 0) {
+		if (!sdata->sensor_settings->drdy_irq.int2.mask) {
 			dev_err(&indio_dev->dev,
 					"DRDY on INT2 not available.\n");
 			return -EINVAL;
@@ -460,10 +461,11 @@ EXPORT_SYMBOL(st_sensors_init_sensor);
 int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 {
 	int err;
-	u8 drdy_mask;
+	u8 drdy_addr, drdy_mask;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	if (!sdata->sensor_settings->drdy_irq.addr) {
+	if (!sdata->sensor_settings->drdy_irq.int1.addr &&
+	    !sdata->sensor_settings->drdy_irq.int2.addr) {
 		/*
 		 * there are some devices (e.g. LIS3MDL) where drdy line is
 		 * routed to a given pin and it is not possible to select a
@@ -485,18 +487,20 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 			goto st_accel_set_dataready_irq_error;
 	}
 
-	if (sdata->drdy_int_pin == 1)
-		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int1;
-	else
-		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
+	if (sdata->drdy_int_pin == 1) {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int1.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int1.mask;
+	} else {
+		drdy_addr = sdata->sensor_settings->drdy_irq.int2.addr;
+		drdy_mask = sdata->sensor_settings->drdy_irq.int2.mask;
+	}
 
 	/* Flag to the poll function that the hardware trigger is in use */
 	sdata->hw_irq_trigger = enable;
 
 	/* Enable/Disable the interrupt generator for data ready. */
-	err = st_sensors_write_data_with_mask(indio_dev,
-					sdata->sensor_settings->drdy_irq.addr,
-					drdy_mask, (int)enable);
+	err = st_sensors_write_data_with_mask(indio_dev, drdy_addr,
+					      drdy_mask, (int)enable);
 
 st_accel_set_dataready_irq_error:
 	return err;
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 22c0c1732996..46991f7131d1 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -111,8 +111,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int2 = 0x08,
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
 			/*
 			 * The sensor has IHL (active low) and open
 			 * drain settings, but only for INT1 and not
@@ -184,8 +186,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int2 = 0x08,
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
 			/*
 			 * The sensor has IHL (active low) and open
 			 * drain settings, but only for INT1 and not
@@ -252,8 +256,10 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int2 = 0x08,
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
 			/*
 			 * The sensor has IHL (active low) and open
 			 * drain settings, but only for INT1 and not
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index ace72c57f53c..8745686f233c 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -362,8 +362,10 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = {
 			.mask = 0x10,
 		},
 		.drdy_irq = {
-			.addr = 0x62,
-			.mask_int1 = 0x01,
+			.int1 = {
+				.addr = 0x62,
+				.mask = 0x01,
+			},
 			.stat_drdy = {
 				.addr = 0x67,
 				.mask = 0x07,
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 5f8358e23f5b..b8890e37a2d2 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -280,9 +280,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask = 0x04,
 		},
 		.drdy_irq = {
-			.addr = 0x22,
-			.mask_int1 = 0x04,
-			.mask_int2 = 0x20,
+			.int1 = {
+				.addr = 0x22,
+				.mask = 0x04,
+			},
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x20,
+			},
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 			.addr_od = 0x22,
@@ -338,9 +343,6 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = 0x20,
 			.mask = 0x04,
 		},
-		.drdy_irq = {
-			.addr = 0,
-		},
 		.multi_read_bit = true,
 		.bootime = 2,
 	},
@@ -391,9 +393,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask = 0x04,
 		},
 		.drdy_irq = {
-			.addr = 0x23,
-			.mask_int1 = 0x01,
-			.mask_int2 = 0x00,
+			.int1 = {
+				.addr = 0x23,
+				.mask = 0x01,
+			},
 			.addr_ihl = 0x22,
 			.mask_ihl = 0x80,
 			.addr_od = 0x22,
@@ -455,9 +458,10 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask = 0x02,
 		},
 		.drdy_irq = {
-			.addr = 0x12,
-			.mask_int1 = 0x04,
-			.mask_int2 = 0x00,
+			.int1 = {
+				.addr = 0x12,
+				.mask = 0x04,
+			},
 			.addr_ihl = 0x12,
 			.mask_ihl = 0x80,
 			.addr_od = 0x12,
@@ -614,7 +618,8 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 	press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!pdata && press_data->sensor_settings->drdy_irq.addr)
+	if (!pdata && (press_data->sensor_settings->drdy_irq.int1.addr ||
+		       press_data->sensor_settings->drdy_irq.int2.addr))
 		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
 	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);