iio:st_pressure:initial lps22hh sensor support

Initial support for ST LPS22HH pressure sensor. Datasheet:
http://www2.st.com/resource/en/datasheet/lps22hh.pdf

Features:
 * pressure, temperature data and timestamping channels
 * sampling frequency selection [1..200] Hz
 * interrupt based trigger
 * over I2C or SPI interface

Signed-off-by: mario tesi <mario.tesi@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

5 files changed, 82 insertions, 1 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index eaa7cfcb4c2a..efeb89f3df71 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -165,7 +165,7 @@ config IIO_ST_PRESS
 	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 	help
 	  Say yes here to build support for STMicroelectronics pressure
-	  sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB.
+	  sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index e67eb0d971bf..57946605f3ba 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -21,6 +21,7 @@ enum st_press_type {
 	LPS22HB,
 	LPS33HW,
 	LPS35HW,
+	LPS22HH,
 	ST_PRESS_MAX,
 };
 
@@ -30,6 +31,7 @@ enum st_press_type {
 #define LPS22HB_PRESS_DEV_NAME		"lps22hb"
 #define LPS33HW_PRESS_DEV_NAME		"lps33hw"
 #define LPS35HW_PRESS_DEV_NAME		"lps35hw"
+#define LPS22HH_PRESS_DEV_NAME		"lps22hh"
 
 /**
  * struct st_sensors_platform_data - default press platform data
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 4ddb6cf7d401..38dcdb7c000e 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -492,6 +492,75 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 		.multi_read_bit = false,
 		.bootime = 2,
 	},
+	{
+		/*
+		 * CUSTOM VALUES FOR LPS22HH SENSOR
+		 * See LPS22HH datasheet:
+		 * http://www2.st.com/resource/en/datasheet/lps22hh.pdf
+		 */
+		.wai = 0xb3,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LPS22HH_PRESS_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
+		.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
+		.odr = {
+			.addr = 0x10,
+			.mask = 0x70,
+			.odr_avl = {
+				{ .hz = 1, .value = 0x01 },
+				{ .hz = 10, .value = 0x02 },
+				{ .hz = 25, .value = 0x03 },
+				{ .hz = 50, .value = 0x04 },
+				{ .hz = 75, .value = 0x05 },
+				{ .hz = 100, .value = 0x06 },
+				{ .hz = 200, .value = 0x07 },
+			},
+		},
+		.pw = {
+			.addr = 0x10,
+			.mask = 0x70,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.fs = {
+			.fs_avl = {
+				/*
+				 * Pressure and temperature sensitivity values
+				 * as defined in table 3 of LPS22HH datasheet.
+				 */
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1260MB,
+					.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+					.gain2 = ST_PRESS_LPS22HB_LSB_PER_CELSIUS,
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x10,
+			.mask = BIT(1),
+		},
+		.drdy_irq = {
+			.int1 = {
+				.addr = 0x12,
+				.mask = BIT(2),
+				.addr_od = 0x11,
+				.mask_od = BIT(5),
+			},
+			.addr_ihl = 0x11,
+			.mask_ihl = BIT(6),
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x03,
+			},
+		},
+		.sim = {
+			.addr = 0x10,
+			.value = BIT(0),
+		},
+		.multi_read_bit = false,
+		.bootime = 2,
+	},
 };
 
 static int st_press_write_raw(struct iio_dev *indio_dev,
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 2026a1012012..a60849dd4ea7 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -45,6 +45,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps35hw",
 		.data = LPS35HW_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22hh",
+		.data = LPS22HH_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -69,6 +73,7 @@ static const struct i2c_device_id st_press_id_table[] = {
 	{ LPS22HB_PRESS_DEV_NAME, LPS22HB },
 	{ LPS33HW_PRESS_DEV_NAME, LPS33HW },
 	{ LPS35HW_PRESS_DEV_NAME, LPS35HW },
+	{ LPS22HH_PRESS_DEV_NAME, LPS22HH },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_press_id_table);
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 9a3441b128e7..79a12ed46e54 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -49,6 +49,10 @@ static const struct of_device_id st_press_of_match[] = {
 		.compatible = "st,lps35hw",
 		.data = LPS35HW_PRESS_DEV_NAME,
 	},
+	{
+		.compatible = "st,lps22hh",
+		.data = LPS22HH_PRESS_DEV_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
@@ -93,6 +97,7 @@ static const struct spi_device_id st_press_id_table[] = {
 	{ LPS22HB_PRESS_DEV_NAME },
 	{ LPS33HW_PRESS_DEV_NAME },
 	{ LPS35HW_PRESS_DEV_NAME },
+	{ LPS22HH_PRESS_DEV_NAME },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_press_id_table);