Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...

1 files changed, 20 insertions, 5 deletions

diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
index a46cdf2d8833..65ff0d067018 100644
--- a/drivers/iio/industrialio-core.c
+++ b/drivers/iio/industrialio-core.c
@@ -161,6 +161,7 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_DEBOUNCE_TIME] = "debounce_time",
 	[IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity",
 	[IIO_CHAN_INFO_OVERSAMPLING_RATIO] = "oversampling_ratio",
+	[IIO_CHAN_INFO_THERMOCOUPLE_TYPE] = "thermocouple_type",
 };
 
 /**
@@ -596,6 +597,8 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type,
 		}
 		return l;
 	}
+	case IIO_VAL_CHAR:
+		return snprintf(buf, len, "%c", (char)vals[0]);
 	default:
 		return 0;
 	}
@@ -837,7 +840,8 @@ static ssize_t iio_write_channel_info(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	int ret, fract_mult = 100000;
-	int integer, fract;
+	int integer, fract = 0;
+	bool is_char = false;
 
 	/* Assumes decimal - precision based on number of digits */
 	if (!indio_dev->info->write_raw)
@@ -855,13 +859,24 @@ static ssize_t iio_write_channel_info(struct device *dev,
 		case IIO_VAL_INT_PLUS_NANO:
 			fract_mult = 100000000;
 			break;
+		case IIO_VAL_CHAR:
+			is_char = true;
+			break;
 		default:
 			return -EINVAL;
 		}
 
-	ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
-	if (ret)
-		return ret;
+	if (is_char) {
+		char ch;
+
+		if (sscanf(buf, "%c", &ch) != 1)
+			return -EINVAL;
+		integer = ch;
+	} else {
+		ret = iio_str_to_fixpoint(buf, fract_mult, &integer, &fract);
+		if (ret)
+			return ret;
+	}
 
 	ret = indio_dev->info->write_raw(indio_dev, this_attr->c,
 					 integer, fract, this_attr->address);
@@ -1617,7 +1632,7 @@ static long iio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 }
 
 static const struct file_operations iio_buffer_fileops = {
-	.read = iio_buffer_read_first_n_outer_addr,
+	.read = iio_buffer_read_outer_addr,
 	.release = iio_chrdev_release,
 	.open = iio_chrdev_open,
 	.poll = iio_buffer_poll_addr,