Merge tag 'iio-for-3.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new drivers and cleanups for IIO in the 3.15 cycle.

New drivers:
* si7005 relative humidity and temperature sensor
* Lite-on ltr501 ambient light and proximity sensor

Cleanups
* Clean up some dead comments in max1363
* Drop some obsolete variables in adjd_s311 and tcs3472 left over from
  the introduction of iio_push_to_buffers_with_timestamp.
* Drop some unneeded linux/init.h includes
* Squish a sparse warning in mpl3115 by correctly specifying a be32 variable.
* A number of cleanups and fixes for sca3000
* Drop an unneed checks in mxs-lradc, ad7303 and adis16400.
* Drop a platform_set_drvdata in viperboard after the only use of it was
  removed during a devm conversion.
* Add a missing device name for ak8975 to comply with the ABI.
* Put mpu6050 into the IMU menu as it slipped out into the main menu.
* Fix a typo and some comment formatting in mpu6050.
* Document at91 ADC clock properties.

5 files changed, 23 insertions, 25 deletions

diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 663e88a1a3c1..2b0e45133e9d 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -25,6 +25,8 @@ config ADIS16480
 	  Say yes here to build support for Analog Devices ADIS16375, ADIS16480,
 	  ADIS16485, ADIS16488 inertial sensors.
 
+source "drivers/iio/imu/inv_mpu6050/Kconfig"
+
 endmenu
 
 config IIO_ADIS_LIB
@@ -38,5 +40,3 @@ config IIO_ADIS_LIB_BUFFER
 	help
 	  A set of buffer helper functions for the Analog Devices ADIS* device
 	  family.
-
-source "drivers/iio/imu/inv_mpu6050/Kconfig"
diff --git a/drivers/iio/imu/adis16400_core.c b/drivers/iio/imu/adis16400_core.c
index 7c582f7ae34e..433583b6f800 100644
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -281,7 +281,7 @@ static ssize_t adis16400_write_frequency(struct device *dev,
 	st->variant->set_freq(st, val);
 	mutex_unlock(&indio_dev->mlock);
 
-	return ret ? ret : len;
+	return len;
 }
 
 /* Power down the device */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index df7f1e1157ae..cb9f96b446a5 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -12,7 +12,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/err.h>
@@ -117,7 +116,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
 		return result;
 
 	if (en) {
-		/* Wait for output stablize */
+		/* Wait for output stabilize */
 		msleep(INV_MPU6050_TEMP_UP_TIME);
 		if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
 			/* switch internal clock to PLL */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index f38395529a44..0ab382be1e64 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -126,35 +126,35 @@ struct inv_mpu6050_state {
 #define INV_MPU6050_REG_SAMPLE_RATE_DIV     0x19
 #define INV_MPU6050_REG_CONFIG              0x1A
 #define INV_MPU6050_REG_GYRO_CONFIG         0x1B
-#define INV_MPU6050_REG_ACCEL_CONFIG	    0x1C
+#define INV_MPU6050_REG_ACCEL_CONFIG        0x1C
 
 #define INV_MPU6050_REG_FIFO_EN             0x23
-#define INV_MPU6050_BIT_ACCEL_OUT                   0x08
-#define INV_MPU6050_BITS_GYRO_OUT                   0x70
+#define INV_MPU6050_BIT_ACCEL_OUT           0x08
+#define INV_MPU6050_BITS_GYRO_OUT           0x70
 
 #define INV_MPU6050_REG_INT_ENABLE          0x38
-#define INV_MPU6050_BIT_DATA_RDY_EN                 0x01
-#define INV_MPU6050_BIT_DMP_INT_EN                  0x02
+#define INV_MPU6050_BIT_DATA_RDY_EN         0x01
+#define INV_MPU6050_BIT_DMP_INT_EN          0x02
 
 #define INV_MPU6050_REG_RAW_ACCEL           0x3B
 #define INV_MPU6050_REG_TEMPERATURE         0x41
 #define INV_MPU6050_REG_RAW_GYRO            0x43
 
 #define INV_MPU6050_REG_USER_CTRL           0x6A
-#define INV_MPU6050_BIT_FIFO_RST                    0x04
-#define INV_MPU6050_BIT_DMP_RST                     0x08
-#define INV_MPU6050_BIT_I2C_MST_EN                  0x20
-#define INV_MPU6050_BIT_FIFO_EN                     0x40
-#define INV_MPU6050_BIT_DMP_EN                      0x80
+#define INV_MPU6050_BIT_FIFO_RST            0x04
+#define INV_MPU6050_BIT_DMP_RST             0x08
+#define INV_MPU6050_BIT_I2C_MST_EN          0x20
+#define INV_MPU6050_BIT_FIFO_EN             0x40
+#define INV_MPU6050_BIT_DMP_EN              0x80
 
 #define INV_MPU6050_REG_PWR_MGMT_1          0x6B
-#define INV_MPU6050_BIT_H_RESET                     0x80
-#define INV_MPU6050_BIT_SLEEP                       0x40
-#define INV_MPU6050_BIT_CLK_MASK                    0x7
+#define INV_MPU6050_BIT_H_RESET             0x80
+#define INV_MPU6050_BIT_SLEEP               0x40
+#define INV_MPU6050_BIT_CLK_MASK            0x7
 
 #define INV_MPU6050_REG_PWR_MGMT_2          0x6C
-#define INV_MPU6050_BIT_PWR_ACCL_STBY               0x38
-#define INV_MPU6050_BIT_PWR_GYRO_STBY               0x07
+#define INV_MPU6050_BIT_PWR_ACCL_STBY       0x38
+#define INV_MPU6050_BIT_PWR_GYRO_STBY       0x07
 
 #define INV_MPU6050_REG_FIFO_COUNT_H        0x72
 #define INV_MPU6050_REG_FIFO_R_W            0x74
@@ -180,10 +180,10 @@ struct inv_mpu6050_state {
 
 /* init parameters */
 #define INV_MPU6050_INIT_FIFO_RATE           50
-#define INV_MPU6050_TIME_STAMP_TOR                        5
-#define INV_MPU6050_MAX_FIFO_RATE                         1000
-#define INV_MPU6050_MIN_FIFO_RATE                         4
-#define INV_MPU6050_ONE_K_HZ                              1000
+#define INV_MPU6050_TIME_STAMP_TOR           5
+#define INV_MPU6050_MAX_FIFO_RATE            1000
+#define INV_MPU6050_MIN_FIFO_RATE            4
+#define INV_MPU6050_ONE_K_HZ                 1000
 
 /* scan element definition */
 enum inv_mpu6050_scan {
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
index 429517117eff..0cd306a72a6e 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -12,7 +12,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/err.h>