Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0e35ff06f9af..13bdfbbf5f71 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -79,7 +79,7 @@ int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
 	struct st_sensor_odr_avl odr_out = {0, 0};
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
-	if (!sdata->sensor_settings->odr.addr)
+	if (!sdata->sensor_settings->odr.mask)
 		return 0;
 
 	err = st_sensors_match_odr(sdata->sensor_settings, odr, &odr_out);