diff options
author | Fabrice Gasnier <fabrice.gasnier@st.com> | 2019-03-21 17:47:28 +0100 |
---|---|---|
committer | Jonathan Cameron <Jonathan.Cameron@huawei.com> | 2019-04-04 20:20:39 +0100 |
commit | 11646e81d7750d57b78db716bd6a34e27dff61e8 (patch) | |
tree | bf697b93606abf842bf662b6b61ea5152fea6a19 /drivers/iio/adc/stm32-dfsdm-adc.c | |
parent | a6096762e98b698ccd7658c9ba8c5747f7ad2557 (diff) | |
download | linux-11646e81d7750d57b78db716bd6a34e27dff61e8.tar.bz2 |
iio: adc: stm32-dfsdm: add support for buffer modes
DFSDM conversions can be launched continuously, or using various
triggers:
- by software
- hardware triggers (e.g. like in stm32-adc: TIM, LPTIM, EXTI)
- synchronously with DFSDM filter 0. e.g. for filters 1, 2
Launching conversions can be done using two methods:
a - injected:
- scan mode can be used to convert several channels each time a
trigger occurs.
- When not is scan mode, channels are converted in sequence, one upon
each trigger.
b - regular:
- supports software triggers or synchronous with filter 0
- single or continuous conversions
This patch finalizes DFSDM operating modes using IIO buffer modes:
- INDIO_BUFFER_SOFTWARE: regular continuous conversions (no trigger)
but limited to 1 channel. Users must set sampling frequency in this case.
For filters > 1, conversions can be started synchronously with filter 0.
- INDIO_BUFFER_TRIGGERED: triggered conversions uses injected mode for
launching conversions. DFSDM can use hardware triggers (e.g. STM32 timer
or lptimer), so add INDIO_HARDWARE_TRIGGERED to supported modes.
- INDIO_DIRECT_MODE: Only support DMA-based buffer modes. In case no DMA is
available, only support single conversions.
From userland perspective, to summarize various use cases:
1 - single conversion on any filter:
$ cd iio:deviceX
$ cat in_voltageY_raw
This uses regular a conversion (not continuous)
2 - Using sampling frequency without trigger (single channel, buffer)
$ cd iio:deviceX
$ echo 100 > sampling_frequency
$ echo "" > trigger/current_trigger
$ echo 1 > scan_elements/in_voltageY_en
$ echo 1 > buffer/enable
This uses regular conversion in continuous mode (Frequency is achieved
by tuning filter parameters)
3 - sync mode with filter 0: other filters can be converted when using
"st,filter0-sync" dt property. The conversions will get started at the
same time as filter 0. So for any filters > 1:
$ cd iio:deviceX
$ echo 100 > sampling_frequency
$ echo "" > trigger/current_trigger
$ echo 1 > scan_elements/in_voltageY_en
$ echo 1 > buffer/enable
Then start filter 0 as in 2 above.
4 - Using a hardware trigger (with one channel):
- check trigger, configure it:
$ cat /sys/bus/iio/devices/trigger1/name
tim6_trgo
$ echo 100 > /sys/bus/iio/devices/trigger1/sampling_frequency
- go to any filter:
$ echo 1 > scan_elements/in_voltageY_en
$ echo tim6_trgo > trigger/current_trigger
$ echo 1 > buffer/enable
This uses injected conversion as it uses a hardware trigger (without scan)
5 - Using a hardware trigger (with 2+ channel):
Same as in 4/ above, but enable two or more channels in scan_elements.
This uses injected conversion as it uses a hardware trigger (with scan mode)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'drivers/iio/adc/stm32-dfsdm-adc.c')
-rw-r--r-- | drivers/iio/adc/stm32-dfsdm-adc.c | 218 |
1 files changed, 194 insertions, 24 deletions
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c index 4ead6bf6d8a7..bf0d89eae3ef 100644 --- a/drivers/iio/adc/stm32-dfsdm-adc.c +++ b/drivers/iio/adc/stm32-dfsdm-adc.c @@ -12,6 +12,11 @@ #include <linux/iio/buffer.h> #include <linux/iio/hw-consumer.h> #include <linux/iio/sysfs.h> +#include <linux/iio/timer/stm32-lptim-trigger.h> +#include <linux/iio/timer/stm32-timer-trigger.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/of_device.h> @@ -121,6 +126,61 @@ static int stm32_dfsdm_str2val(const char *str, return -EINVAL; } +/** + * struct stm32_dfsdm_trig_info - DFSDM trigger info + * @name: name of the trigger, corresponding to its source + * @jextsel: trigger signal selection + */ +struct stm32_dfsdm_trig_info { + const char *name; + unsigned int jextsel; +}; + +/* hardware injected trigger enable, edge selection */ +enum stm32_dfsdm_jexten { + STM32_DFSDM_JEXTEN_DISABLED, + STM32_DFSDM_JEXTEN_RISING_EDGE, + STM32_DFSDM_JEXTEN_FALLING_EDGE, + STM32_DFSDM_EXTEN_BOTH_EDGES, +}; + +static const struct stm32_dfsdm_trig_info stm32_dfsdm_trigs[] = { + { TIM1_TRGO, 0 }, + { TIM1_TRGO2, 1 }, + { TIM8_TRGO, 2 }, + { TIM8_TRGO2, 3 }, + { TIM3_TRGO, 4 }, + { TIM4_TRGO, 5 }, + { TIM16_OC1, 6 }, + { TIM6_TRGO, 7 }, + { TIM7_TRGO, 8 }, + { LPTIM1_OUT, 26 }, + { LPTIM2_OUT, 27 }, + { LPTIM3_OUT, 28 }, + {}, +}; + +static int stm32_dfsdm_get_jextsel(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + int i; + + /* lookup triggers registered by stm32 timer trigger driver */ + for (i = 0; stm32_dfsdm_trigs[i].name; i++) { + /** + * Checking both stm32 timer trigger type and trig name + * should be safe against arbitrary trigger names. + */ + if ((is_stm32_timer_trigger(trig) || + is_stm32_lptim_trigger(trig)) && + !strcmp(stm32_dfsdm_trigs[i].name, trig->name)) { + return stm32_dfsdm_trigs[i].jextsel; + } + } + + return -EINVAL; +} + static int stm32_dfsdm_set_osrs(struct stm32_dfsdm_filter *fl, unsigned int fast, unsigned int oversamp) { @@ -265,7 +325,8 @@ static int stm32_dfsdm_chan_configure(struct stm32_dfsdm *dfsdm, } static int stm32_dfsdm_start_filter(struct stm32_dfsdm_adc *adc, - unsigned int fl_id) + unsigned int fl_id, + struct iio_trigger *trig) { struct stm32_dfsdm *dfsdm = adc->dfsdm; int ret; @@ -277,7 +338,7 @@ static int stm32_dfsdm_start_filter(struct stm32_dfsdm_adc *adc, return ret; /* Nothing more to do for injected (scan mode/triggered) conversions */ - if (adc->nconv > 1) + if (adc->nconv > 1 || trig) return 0; /* Software start (single or continuous) regular conversion */ @@ -294,8 +355,38 @@ static void stm32_dfsdm_stop_filter(struct stm32_dfsdm *dfsdm, DFSDM_CR1_DFEN_MASK, DFSDM_CR1_DFEN(0)); } +static int stm32_dfsdm_filter_set_trig(struct stm32_dfsdm_adc *adc, + unsigned int fl_id, + struct iio_trigger *trig) +{ + struct iio_dev *indio_dev = iio_priv_to_dev(adc); + struct regmap *regmap = adc->dfsdm->regmap; + u32 jextsel = 0, jexten = STM32_DFSDM_JEXTEN_DISABLED; + int ret; + + if (trig) { + ret = stm32_dfsdm_get_jextsel(indio_dev, trig); + if (ret < 0) + return ret; + + /* set trigger source and polarity (default to rising edge) */ + jextsel = ret; + jexten = STM32_DFSDM_JEXTEN_RISING_EDGE; + } + + ret = regmap_update_bits(regmap, DFSDM_CR1(fl_id), + DFSDM_CR1_JEXTSEL_MASK | DFSDM_CR1_JEXTEN_MASK, + DFSDM_CR1_JEXTSEL(jextsel) | + DFSDM_CR1_JEXTEN(jexten)); + if (ret < 0) + return ret; + + return 0; +} + static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc, - unsigned int fl_id) + unsigned int fl_id, + struct iio_trigger *trig) { struct iio_dev *indio_dev = iio_priv_to_dev(adc); struct regmap *regmap = adc->dfsdm->regmap; @@ -322,6 +413,10 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc, if (ret) return ret; + ret = stm32_dfsdm_filter_set_trig(adc, fl_id, trig); + if (ret) + return ret; + /* * DFSDM modes configuration W.R.T audio/iio type modes * ---------------------------------------------------------------- @@ -341,7 +436,7 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc, * | | | | sync_mode | * ---------------------------------------------------------------- */ - if (adc->nconv == 1) { + if (adc->nconv == 1 && !trig) { bit = __ffs(adc->smask); chan = indio_dev->channels + bit; @@ -365,13 +460,15 @@ static int stm32_dfsdm_filter_configure(struct stm32_dfsdm_adc *adc, return ret; /* Use scan mode for multiple channels */ - cr1 = DFSDM_CR1_JSCAN(1); + cr1 = DFSDM_CR1_JSCAN((adc->nconv > 1) ? 1 : 0); /* - * Continuous conversions not supported in injected mode: - * - use conversions in sync with filter 0 + * Continuous conversions not supported in injected mode, + * either use: + * - conversions in sync with filter 0 + * - triggered conversions */ - if (!fl->sync_mode) + if (!fl->sync_mode && !trig) return -EINVAL; cr1 |= DFSDM_CR1_JSYNC(fl->sync_mode); } @@ -503,7 +600,8 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev, return len; } -static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc) +static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, + struct iio_trigger *trig) { struct regmap *regmap = adc->dfsdm->regmap; int ret; @@ -512,11 +610,11 @@ static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc) if (ret < 0) return ret; - ret = stm32_dfsdm_filter_configure(adc, adc->fl_id); + ret = stm32_dfsdm_filter_configure(adc, adc->fl_id, trig); if (ret < 0) goto stop_channels; - ret = stm32_dfsdm_start_filter(adc, adc->fl_id); + ret = stm32_dfsdm_start_filter(adc, adc->fl_id, trig); if (ret < 0) goto filter_unconfigure; @@ -548,6 +646,7 @@ static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev, { struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); unsigned int watermark = DFSDM_DMA_BUFFER_SIZE / 2; + unsigned int rx_buf_sz = DFSDM_DMA_BUFFER_SIZE; /* * DMA cyclic transfers are used, buffer is split into two periods. @@ -556,7 +655,7 @@ static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev, * - one buffer (period) driver pushed to ASoC side. */ watermark = min(watermark, val * (unsigned int)(sizeof(u32))); - adc->buf_sz = watermark * 2; + adc->buf_sz = min(rx_buf_sz, watermark * 2 * adc->nconv); return 0; } @@ -586,13 +685,41 @@ static unsigned int stm32_dfsdm_adc_dma_residue(struct stm32_dfsdm_adc *adc) return 0; } -static void stm32_dfsdm_audio_dma_buffer_done(void *data) +static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); + int available = stm32_dfsdm_adc_dma_residue(adc); + + while (available >= indio_dev->scan_bytes) { + u32 *buffer = (u32 *)&adc->rx_buf[adc->bufi]; + + iio_push_to_buffers_with_timestamp(indio_dev, buffer, + pf->timestamp); + available -= indio_dev->scan_bytes; + adc->bufi += indio_dev->scan_bytes; + if (adc->bufi >= adc->buf_sz) + adc->bufi = 0; + } + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static void stm32_dfsdm_dma_buffer_done(void *data) { struct iio_dev *indio_dev = data; struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); int available = stm32_dfsdm_adc_dma_residue(adc); size_t old_pos; + if (indio_dev->currentmode & INDIO_BUFFER_TRIGGERED) { + iio_trigger_poll_chained(indio_dev->trig); + return; + } + /* * FIXME: In Kernel interface does not support cyclic DMA buffer,and * offers only an interface to push data samples per samples. @@ -620,6 +747,9 @@ static void stm32_dfsdm_audio_dma_buffer_done(void *data) adc->bufi = 0; old_pos = 0; } + /* regular iio buffer without trigger */ + if (adc->dev_data->type == DFSDM_IIO) + iio_push_to_buffers(indio_dev, buffer); } if (adc->cb) adc->cb(&adc->rx_buf[old_pos], adc->bufi - old_pos, @@ -643,7 +773,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev) dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__, adc->buf_sz, adc->buf_sz / 2); - if (adc->nconv == 1) + if (adc->nconv == 1 && !indio_dev->trig) config.src_addr += DFSDM_RDATAR(adc->fl_id); else config.src_addr += DFSDM_JDATAR(adc->fl_id); @@ -660,7 +790,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev) if (!desc) return -EBUSY; - desc->callback = stm32_dfsdm_audio_dma_buffer_done; + desc->callback = stm32_dfsdm_dma_buffer_done; desc->callback_param = indio_dev; cookie = dmaengine_submit(desc); @@ -671,7 +801,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev) /* Issue pending DMA requests */ dma_async_issue_pending(adc->dma_chan); - if (adc->nconv == 1) { + if (adc->nconv == 1 && !indio_dev->trig) { /* Enable regular DMA transfer*/ ret = regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR1(adc->fl_id), @@ -726,13 +856,19 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) struct stm32_dfsdm_adc *adc = iio_priv(indio_dev); int ret; + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) { + ret = iio_triggered_buffer_postenable(indio_dev); + if (ret < 0) + return ret; + } + /* Reset adc buffer index */ adc->bufi = 0; if (adc->hwc) { ret = iio_hw_consumer_enable(adc->hwc); if (ret < 0) - return ret; + goto err_predisable; } ret = stm32_dfsdm_start_dfsdm(adc->dfsdm); @@ -745,7 +881,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev) goto stop_dfsdm; } - ret = stm32_dfsdm_start_conv(adc); + ret = stm32_dfsdm_start_conv(adc, indio_dev->trig); if (ret) { dev_err(&indio_dev->dev, "Can't start conversion\n"); goto err_stop_dma; @@ -760,6 +896,9 @@ stop_dfsdm: err_stop_hwc: if (adc->hwc) iio_hw_consumer_disable(adc->hwc); +err_predisable: + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + iio_triggered_buffer_predisable(indio_dev); return ret; } @@ -777,6 +916,9 @@ static int stm32_dfsdm_predisable(struct iio_dev *indio_dev) if (adc->hwc) iio_hw_consumer_disable(adc->hwc); + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + iio_triggered_buffer_predisable(indio_dev); + return 0; } @@ -856,7 +998,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev, adc->nconv = 1; adc->smask = BIT(chan->scan_index); - ret = stm32_dfsdm_start_conv(adc); + ret = stm32_dfsdm_start_conv(adc, NULL); if (ret < 0) { regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id), DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0)); @@ -978,6 +1120,12 @@ static int stm32_dfsdm_read_raw(struct iio_dev *indio_dev, return -EINVAL; } +static int stm32_dfsdm_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + return stm32_dfsdm_get_jextsel(indio_dev, trig) < 0 ? -EINVAL : 0; +} + static const struct iio_info stm32_dfsdm_info_audio = { .hwfifo_set_watermark = stm32_dfsdm_set_watermark, .read_raw = stm32_dfsdm_read_raw, @@ -986,9 +1134,11 @@ static const struct iio_info stm32_dfsdm_info_audio = { }; static const struct iio_info stm32_dfsdm_info_adc = { + .hwfifo_set_watermark = stm32_dfsdm_set_watermark, .read_raw = stm32_dfsdm_read_raw, .write_raw = stm32_dfsdm_write_raw, .update_scan_mode = stm32_dfsdm_update_scan_mode, + .validate_trigger = stm32_dfsdm_validate_trigger, }; static irqreturn_t stm32_dfsdm_irq(int irq, void *arg) @@ -1061,6 +1211,9 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev) return -ENOMEM; } + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; + indio_dev->setup_ops = &stm32_dfsdm_buffer_setup_ops; + return 0; } @@ -1082,7 +1235,8 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev, * IIO_CHAN_INFO_OVERSAMPLING_RATIO: used to set oversampling */ ch->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); - ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO); + ch->info_mask_shared_by_all = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | + BIT(IIO_CHAN_INFO_SAMP_FREQ); if (adc->dev_data->type == DFSDM_AUDIO) { ch->scan_type.sign = 's'; @@ -1104,9 +1258,6 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev) struct stm32_dfsdm_channel *d_ch; int ret; - indio_dev->modes |= INDIO_BUFFER_SOFTWARE; - indio_dev->setup_ops = &stm32_dfsdm_buffer_setup_ops; - ch = devm_kzalloc(&indio_dev->dev, sizeof(*ch), GFP_KERNEL); if (!ch) return -ENOMEM; @@ -1174,6 +1325,25 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev) init_completion(&adc->completion); + /* Optionally request DMA */ + if (stm32_dfsdm_dma_request(indio_dev)) { + dev_dbg(&indio_dev->dev, "No DMA support\n"); + return 0; + } + + ret = iio_triggered_buffer_setup(indio_dev, + &iio_pollfunc_store_time, + &stm32_dfsdm_adc_trigger_handler, + &stm32_dfsdm_buffer_setup_ops); + if (ret) { + stm32_dfsdm_dma_release(indio_dev); + dev_err(&indio_dev->dev, "buffer setup failed\n"); + return ret; + } + + /* lptimer/timer hardware triggers */ + indio_dev->modes |= INDIO_HARDWARE_TRIGGERED; + return 0; } @@ -1221,7 +1391,7 @@ static int stm32_dfsdm_adc_probe(struct platform_device *pdev) iio->dev.parent = dev; iio->dev.of_node = np; - iio->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + iio->modes = INDIO_DIRECT_MODE; platform_set_drvdata(pdev, adc); |