diff options
| author | Ben Collins <bcollins@ubuntu.com> | 2006-06-12 18:12:59 -0400 |
|---|---|---|
| committer | Ben Collins <bcollins@ubuntu.com> | 2006-06-12 18:12:59 -0400 |
| commit | fe42b05a9929e159355bde6025ae46db2ac88658 (patch) | |
| tree | 61a4bd4dd7b138e3d3148f1b288158eb53361c37 /drivers/ieee1394 | |
| parent | eaf88450d21fc839c3e77fa6942b8d4192bdfe53 (diff) | |
| download | linux-fe42b05a9929e159355bde6025ae46db2ac88658.tar.bz2 | |
sbp2: remove manipulation of inquiry response
This code became ineffective a few Linux releases ago and is not
required anyway.
Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a
scatterlist these days. Checking random bites into it and then
mangling the data in sbp2_check_sbp2_response will cause really bad
memory corruption when you're not lucky enough to have the check not
trigger by luck.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Ben Collins <bcollins@ubuntu.com>
Diffstat (limited to 'drivers/ieee1394')
| -rw-r--r-- | drivers/ieee1394/sbp2.c | 34 | ||||
| -rw-r--r-- | drivers/ieee1394/sbp2.h | 5 |
2 files changed, 2 insertions, 37 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c index c30e03a0e63b..11c353a4653b 100644 --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -2112,33 +2112,6 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense } /* - * This function is called after a command is completed, in order to do any necessary SBP-2 - * response data translations for the SCSI stack - */ -static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *SCpnt) -{ - u8 *scsi_buf = SCpnt->request_buffer; - - SBP2_DEBUG_ENTER(); - - if (SCpnt->cmnd[0] == INQUIRY && (SCpnt->cmnd[1] & 3) == 0) { - /* - * Make sure data length is ok. Minimum length is 36 bytes - */ - if (scsi_buf[4] == 0) { - scsi_buf[4] = 36 - 5; - } - - /* - * Fix ansi revision and response data format - */ - scsi_buf[2] |= 2; - scsi_buf[3] = (scsi_buf[3] & 0xf0) | 2; - } -} - -/* * This function deals with status writes from the SBP-2 device */ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid, int destid, @@ -2477,13 +2450,6 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id, } /* - * Take care of any sbp2 response data mucking here (RBC stuff, etc.) - */ - if (SCpnt->result == DID_OK << 16) { - sbp2_check_sbp2_response(scsi_id, SCpnt); - } - - /* * If a bus reset is in progress and there was an error, complete * the command as busy so that it will get retried. */ diff --git a/drivers/ieee1394/sbp2.h b/drivers/ieee1394/sbp2.h index f4ccc9d0fba4..2f53b16afc51 100644 --- a/drivers/ieee1394/sbp2.h +++ b/drivers/ieee1394/sbp2.h @@ -395,9 +395,8 @@ static int sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id, static int sbp2_send_command(struct scsi_id_instance_data *scsi_id, struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)); -static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data); -static void sbp2_check_sbp2_response(struct scsi_id_instance_data *scsi_id, - struct scsi_cmnd *SCpnt); +static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, + unchar *sense_data); static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id, struct unit_directory *ud); static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id); |