ide: factor out simplex handling from ide_pci_dma_base()

* Factor out simplex handling from ide_pci_dma_base() to
  ide_pci_check_simplex().

* Set hwif->dma_base early in ->init_dma method / ide_hwif_setup_dma()
  and reset it in ide_init_port() if DMA initialization fails.

* Use ->read_sff_dma_status instead of ->INB in ide_pci_dma_base().

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

4 files changed, 42 insertions, 18 deletions

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 9d8686a49fcf..ec5f58c6f19a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1363,6 +1363,7 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
 
 		if (rc < 0) {
 			printk(KERN_INFO "%s: DMA disabled\n", hwif->name);
+			hwif->dma_base = 0;
 			hwif->swdma_mask = 0;
 			hwif->mwdma_mask = 0;
 			hwif->ultra_mask = 0;
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 8015f6f65488..5ef7817ac64f 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -471,7 +471,15 @@ static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long base = ide_pci_dma_base(hwif, d);
 
-	if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+	if (base == 0)
+		return -1;
+
+	hwif->dma_base = base;
+
+	if (ide_pci_check_simplex(hwif, d) < 0)
+		return -1;
+
+	if (ide_pci_set_master(dev, d->name) < 0)
 		return -1;
 
 	if (!hwif->channel)
@@ -483,8 +491,6 @@ static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	hwif->dma_base = base;
-
 	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 201e5ddae921..e5651cefa395 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1320,7 +1320,15 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
 	unsigned long flags, base = ide_pci_dma_base(hwif, d);
 	u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
 
-	if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+	if (base == 0)
+		return -1;
+
+	hwif->dma_base = base;
+
+	if (ide_pci_check_simplex(hwif, d) < 0)
+		return -1;
+
+	if (ide_pci_set_master(dev, d->name) < 0)
 		return -1;
 
 	dma_old = inb(base + 2);
@@ -1346,8 +1354,6 @@ static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
 	if (ide_allocate_dma_engine(hwif))
 		return -1;
 
-	hwif->dma_base = base;
-
 	hwif->dma_ops = &sff_dma_ops;
 
 	return 0;
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index b047013f3652..c1b609d9cb28 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -73,15 +73,12 @@ static void ide_pci_clear_simplex(unsigned long dma_base, const char *name)
  *	@d: IDE port info
  *
  *	Fetch the DMA Bus-Master-I/O-Base-Address (BMIBA) from PCI space.
- *	Where a device has a partner that is already in DMA mode we check
- *	and enforce IDE simplex rules.
  */
 
 unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = 0;
-	u8 dma_stat = 0;
 
 	if (hwif->host_flags & IDE_HFLAG_MMIO)
 		return hwif->dma_base;
@@ -102,11 +99,19 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 	if (hwif->channel)
 		dma_base += 8;
 
-	if (d->host_flags & IDE_HFLAG_CS5520)
+	return dma_base;
+}
+EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+
+int ide_pci_check_simplex(ide_hwif_t *hwif, const struct ide_port_info *d)
+{
+	u8 dma_stat;
+
+	if (d->host_flags & (IDE_HFLAG_MMIO | IDE_HFLAG_CS5520))
 		goto out;
 
 	if (d->host_flags & IDE_HFLAG_CLEAR_SIMPLEX) {
-		ide_pci_clear_simplex(dma_base, d->name);
+		ide_pci_clear_simplex(hwif->dma_base, d->name);
 		goto out;
 	}
 
@@ -120,15 +125,15 @@ unsigned long ide_pci_dma_base(ide_hwif_t *hwif, const struct ide_port_info *d)
 	 * we tune the drive then try to grab DMA ownership if we want to be
 	 * the DMA end.  This has to be become dynamic to handle hot-plug.
 	 */
-	dma_stat = hwif->INB(dma_base + 2);
+	dma_stat = hwif->read_sff_dma_status(hwif);
 	if ((dma_stat & 0x80) && hwif->mate && hwif->mate->dma_base) {
 		printk(KERN_INFO "%s: simplex device: DMA disabled\n", d->name);
-		dma_base = 0;
+		return -1;
 	}
 out:
-	return dma_base;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(ide_pci_dma_base);
+EXPORT_SYMBOL_GPL(ide_pci_check_simplex);
 
 /*
  * Set up BM-DMA capability (PnP BIOS should have done this)
@@ -363,7 +368,15 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 	     (dev->class & 0x80))) {
 		unsigned long base = ide_pci_dma_base(hwif, d);
 
-		if (base == 0 || ide_pci_set_master(dev, d->name) < 0)
+		if (base == 0)
+			return -1;
+
+		hwif->dma_base = base;
+
+		if (ide_pci_check_simplex(hwif, d) < 0)
+			return -1;
+
+		if (ide_pci_set_master(dev, d->name) < 0)
 			return -1;
 
 		if (hwif->host_flags & IDE_HFLAG_MMIO)
@@ -377,8 +390,6 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
 		if (ide_allocate_dma_engine(hwif))
 			return -1;
 
-		hwif->dma_base = base;
-
 		hwif->dma_ops = &sff_dma_ops;
 	}