summaryrefslogtreecommitdiffstats
path: root/drivers/ide/sl82c105.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/sl82c105.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
downloadlinux-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.bz2
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/sl82c105.c')
-rw-r--r--drivers/ide/sl82c105.c371
1 files changed, 371 insertions, 0 deletions
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
new file mode 100644
index 000000000000..84dc33602ff8
--- /dev/null
+++ b/drivers/ide/sl82c105.c
@@ -0,0 +1,371 @@
+/*
+ * SL82C105/Winbond 553 IDE driver
+ *
+ * Maintainer unknown.
+ *
+ * Drive tuning added from Rebel.com's kernel sources
+ * -- Russell King (15/11/98) linux@arm.linux.org.uk
+ *
+ * Merge in Russell's HW workarounds, fix various problems
+ * with the timing registers setup.
+ * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
+ *
+ * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "sl82c105"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(arg) printk arg
+#else
+#define DBG(fmt,...)
+#endif
+/*
+ * SL82C105 PCI config register 0x40 bits.
+ */
+#define CTRL_IDE_IRQB (1 << 30)
+#define CTRL_IDE_IRQA (1 << 28)
+#define CTRL_LEGIRQ (1 << 11)
+#define CTRL_P1F16 (1 << 5)
+#define CTRL_P1EN (1 << 4)
+#define CTRL_P0F16 (1 << 1)
+#define CTRL_P0EN (1 << 0)
+
+/*
+ * Convert a PIO mode and cycle time to the required on/off times
+ * for the interface. This has protection against runaway timings.
+ */
+static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
+{
+ struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
+ unsigned int cmd_on, cmd_off;
+ u8 iordy = 0;
+
+ cmd_on = (t->active + 29) / 30;
+ cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
+
+ if (cmd_on == 0)
+ cmd_on = 1;
+
+ if (cmd_off == 0)
+ cmd_off = 1;
+
+ if (pio > 2 || ata_id_has_iordy(drive->id))
+ iordy = 0x40;
+
+ return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
+}
+
+/*
+ * Configure the chipset for PIO mode.
+ */
+static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ int reg = 0x44 + drive->dn * 4;
+ u16 drv_ctrl;
+
+ drv_ctrl = get_pio_timings(drive, pio);
+
+ /*
+ * Store the PIO timings so that we can restore them
+ * in case DMA will be turned off...
+ */
+ drive->drive_data &= 0xffff0000;
+ drive->drive_data |= drv_ctrl;
+
+ pci_write_config_word(dev, reg, drv_ctrl);
+ pci_read_config_word (dev, reg, &drv_ctrl);
+
+ printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
+ ide_xfer_verbose(pio + XFER_PIO_0),
+ ide_pio_cycle_time(drive, pio), drv_ctrl);
+}
+
+/*
+ * Configure the chipset for DMA mode.
+ */
+static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
+{
+ static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+ u16 drv_ctrl;
+
+ DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
+ drive->name, ide_xfer_verbose(speed)));
+
+ drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+
+ /*
+ * Store the DMA timings so that we can actually program
+ * them when DMA will be turned on...
+ */
+ drive->drive_data &= 0x0000ffff;
+ drive->drive_data |= (unsigned long)drv_ctrl << 16;
+}
+
+/*
+ * The SL82C105 holds off all IDE interrupts while in DMA mode until
+ * all DMA activity is completed. Sometimes this causes problems (eg,
+ * when the drive wants to report an error condition).
+ *
+ * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller
+ * state machine. We need to kick this to work around various bugs.
+ */
+static inline void sl82c105_reset_host(struct pci_dev *dev)
+{
+ u16 val;
+
+ pci_read_config_word(dev, 0x7e, &val);
+ pci_write_config_word(dev, 0x7e, val | (1 << 2));
+ pci_write_config_word(dev, 0x7e, val & ~(1 << 2));
+}
+
+/*
+ * If we get an IRQ timeout, it might be that the DMA state machine
+ * got confused. Fix from Todd Inglett. Details from Winbond.
+ *
+ * This function is called when the IDE timer expires, the drive
+ * indicates that it is READY, and we were waiting for DMA to complete.
+ */
+static void sl82c105_dma_lost_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
+ u8 dma_cmd;
+
+ printk("sl82c105: lost IRQ, resetting host\n");
+
+ /*
+ * Check the raw interrupt from the drive.
+ */
+ pci_read_config_dword(dev, 0x40, &val);
+ if (val & mask)
+ printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+
+ /*
+ * Was DMA enabled? If so, disable it - we're resetting the
+ * host. The IDE layer will be handling the drive for us.
+ */
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ if (dma_cmd & 1) {
+ outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
+ printk("sl82c105: DMA was enabled\n");
+ }
+
+ sl82c105_reset_host(dev);
+}
+
+/*
+ * ATAPI devices can cause the SL82C105 DMA state machine to go gaga.
+ * Winbond recommend that the DMA state machine is reset prior to
+ * setting the bus master DMA enable bit.
+ *
+ * The generic IDE core will have disabled the BMEN bit before this
+ * function is called.
+ */
+static void sl82c105_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = to_pci_dev(hwif->dev);
+ int reg = 0x44 + drive->dn * 4;
+
+ DBG(("%s(drive:%s)\n", __func__, drive->name));
+
+ pci_write_config_word(dev, reg, drive->drive_data >> 16);
+
+ sl82c105_reset_host(dev);
+ ide_dma_start(drive);
+}
+
+static void sl82c105_dma_timeout(ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+
+ DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
+
+ sl82c105_reset_host(dev);
+ ide_dma_timeout(drive);
+}
+
+static int sl82c105_dma_end(ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ int reg = 0x44 + drive->dn * 4;
+ int ret;
+
+ DBG(("%s(drive:%s)\n", __func__, drive->name));
+
+ ret = ide_dma_end(drive);
+
+ pci_write_config_word(dev, reg, drive->drive_data);
+
+ return ret;
+}
+
+/*
+ * ATA reset will clear the 16 bits mode in the control
+ * register, we need to reprogram it
+ */
+static void sl82c105_resetproc(ide_drive_t *drive)
+{
+ struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
+ u32 val;
+
+ DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
+
+ pci_read_config_dword(dev, 0x40, &val);
+ val |= (CTRL_P1F16 | CTRL_P0F16);
+ pci_write_config_dword(dev, 0x40, val);
+}
+
+/*
+ * Return the revision of the Winbond bridge
+ * which this function is part of.
+ */
+static u8 sl82c105_bridge_revision(struct pci_dev *dev)
+{
+ struct pci_dev *bridge;
+
+ /*
+ * The bridge should be part of the same device, but function 0.
+ */
+ bridge = pci_get_bus_and_slot(dev->bus->number,
+ PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+ if (!bridge)
+ return -1;
+
+ /*
+ * Make sure it is a Winbond 553 and is an ISA bridge.
+ */
+ if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
+ bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
+ bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
+ pci_dev_put(bridge);
+ return -1;
+ }
+ /*
+ * We need to find function 0's revision, not function 1
+ */
+ pci_dev_put(bridge);
+
+ return bridge->revision;
+}
+
+/*
+ * Enable the PCI device
+ *
+ * --BenH: It's arch fixup code that should enable channels that
+ * have not been enabled by firmware. I decided we can still enable
+ * channel 0 here at least, but channel 1 has to be enabled by
+ * firmware or arch code. We still set both to 16 bits mode.
+ */
+static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
+{
+ u32 val;
+
+ DBG(("init_chipset_sl82c105()\n"));
+
+ pci_read_config_dword(dev, 0x40, &val);
+ val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
+ pci_write_config_dword(dev, 0x40, val);
+
+ return dev->irq;
+}
+
+static const struct ide_port_ops sl82c105_port_ops = {
+ .set_pio_mode = sl82c105_set_pio_mode,
+ .set_dma_mode = sl82c105_set_dma_mode,
+ .resetproc = sl82c105_resetproc,
+};
+
+static const struct ide_dma_ops sl82c105_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = sl82c105_dma_start,
+ .dma_end = sl82c105_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_lost_irq = sl82c105_dma_lost_irq,
+ .dma_timeout = sl82c105_dma_timeout,
+};
+
+static const struct ide_port_info sl82c105_chipset __devinitdata = {
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_sl82c105,
+ .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
+ .port_ops = &sl82c105_port_ops,
+ .dma_ops = &sl82c105_dma_ops,
+ .host_flags = IDE_HFLAG_IO_32BIT |
+ IDE_HFLAG_UNMASK_IRQS |
+/* FIXME: check for Compatibility mode in generic IDE PCI code */
+#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
+ IDE_HFLAG_FORCE_LEGACY_IRQS |
+#endif
+ IDE_HFLAG_SERIALIZE_DMA |
+ IDE_HFLAG_NO_AUTODMA,
+ .pio_mask = ATA_PIO5,
+ .mwdma_mask = ATA_MWDMA2,
+};
+
+static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct ide_port_info d = sl82c105_chipset;
+ u8 rev = sl82c105_bridge_revision(dev);
+
+ if (rev <= 5) {
+ /*
+ * Never ever EVER under any circumstances enable
+ * DMA when the bridge is this old.
+ */
+ printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge "
+ "revision %d, BM-DMA disabled\n", rev);
+ d.dma_ops = NULL;
+ d.mwdma_mask = 0;
+ d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA;
+ }
+
+ return ide_pci_init_one(dev, &d, NULL);
+}
+
+static const struct pci_device_id sl82c105_pci_tbl[] = {
+ { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
+
+static struct pci_driver sl82c105_pci_driver = {
+ .name = "W82C105_IDE",
+ .id_table = sl82c105_pci_tbl,
+ .probe = sl82c105_init_one,
+ .remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init sl82c105_ide_init(void)
+{
+ return ide_pci_register_driver(&sl82c105_pci_driver);
+}
+
+static void __exit sl82c105_ide_exit(void)
+{
+ pci_unregister_driver(&sl82c105_pci_driver);
+}
+
+module_init(sl82c105_ide_init);
+module_exit(sl82c105_ide_exit);
+
+MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
+MODULE_LICENSE("GPL");