diff options
author | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-07-09 23:17:58 +0200 |
---|---|---|
committer | Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 2007-07-09 23:17:58 +0200 |
commit | 49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb (patch) | |
tree | f61c34da6092f2f1a97a78da567afc59ad40850b /drivers/ide/pci/jmicron.c | |
parent | 75b1d97535327d0428c6bffd9d5407e65546fd5d (diff) | |
download | linux-49521f97ccd3c2bf6e71a91cea8fe65d170fa4fb.tar.bz2 |
ide: add short cables support
This patch allows users to override both host and device side cable detection
with "ideX=ata66" kernel parameter. Thanks to this it should be now possible
to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable
instead of 80-pin one.
Next patches add automatic detection of some systems using short cables.
Changes:
* Rename hwif->udma_four to hwif->cbl and make it u8.
* Convert all existing users accordingly (use ATA_CBL_* defines while at it).
* Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three().
* Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Diffstat (limited to 'drivers/ide/pci/jmicron.c')
-rw-r--r-- | drivers/ide/pci/jmicron.c | 20 |
1 files changed, 11 insertions, 9 deletions
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 76ed25147229..a6008f63e71e 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -25,10 +25,10 @@ typedef enum { * ata66_jmicron - Cable check * @hwif: IDE port * - * Return 1 if the cable is 80pin + * Returns the cable type. */ -static int __devinit ata66_jmicron(ide_hwif_t *hwif) +static u8 __devinit ata66_jmicron(ide_hwif_t *hwif) { struct pci_dev *pdev = hwif->pci_dev; @@ -70,16 +70,17 @@ static int __devinit ata66_jmicron(ide_hwif_t *hwif) { case PORT_PATA0: if (control & (1 << 3)) /* 40/80 pin primary */ - return 0; - return 1; + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; case PORT_PATA1: if (control5 & (1 << 19)) /* 40/80 pin secondary */ - return 0; - return 1; + return ATA_CBL_PATA40; + return ATA_CBL_PATA80; case PORT_SATA: break; } - return 1; /* Avoid bogus "control reaches end of non-void function" */ + /* Avoid bogus "control reaches end of non-void function" */ + return ATA_CBL_PATA80; } static void jmicron_tuneproc (ide_drive_t *drive, byte mode_wanted) @@ -159,8 +160,9 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) hwif->mwdma_mask = 0x07; hwif->ide_dma_check = &jmicron_config_drive_for_dma; - if (!(hwif->udma_four)) - hwif->udma_four = ata66_jmicron(hwif); + + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = ata66_jmicron(hwif); hwif->autodma = 1; hwif->drives[0].autodma = hwif->autodma; |