Merge branch 'linus' into x86/xen

Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/process_64.c
	arch/x86/xen/enlighten.c

1 files changed, 73 insertions, 44 deletions

diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index a896a283f27f..1c51949833be 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -40,6 +40,7 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/ide.h>
+#include <linux/hdreg.h>
 #include <linux/completion.h>
 #include <linux/reboot.h>
 #include <linux/cdrom.h>
@@ -183,18 +184,18 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 		if (drive->media != ide_disk)
 			break;
 		/* Not supported? Switch to next step now. */
-		if (!drive->wcache || !ide_id_has_flush_cache(drive->id)) {
+		if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) {
 			ide_complete_power_step(drive, rq, 0, 0);
 			return ide_stopped;
 		}
-		if (ide_id_has_flush_cache_ext(drive->id))
-			args->tf.command = WIN_FLUSH_CACHE_EXT;
+		if (ata_id_flush_ext_enabled(drive->id))
+			args->tf.command = ATA_CMD_FLUSH_EXT;
 		else
-			args->tf.command = WIN_FLUSH_CACHE;
+			args->tf.command = ATA_CMD_FLUSH;
 		goto out_do_tf;
 
 	case idedisk_pm_standby:	/* Suspend step 2 (standby) */
-		args->tf.command = WIN_STANDBYNOW1;
+		args->tf.command = ATA_CMD_STANDBYNOW1;
 		goto out_do_tf;
 
 	case idedisk_pm_restore_pio:	/* Resume step 1 (restore PIO) */
@@ -209,7 +210,7 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
 		return ide_stopped;
 
 	case idedisk_pm_idle:		/* Resume step 2 (idle) */
-		args->tf.command = WIN_IDLEIMMEDIATE;
+		args->tf.command = ATA_CMD_IDLEIMMEDIATE;
 		goto out_do_tf;
 
 	case ide_pm_restore_dma:	/* Resume step 3 (restore DMA) */
@@ -322,7 +323,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 		ide_task_t *task = (ide_task_t *)rq->special;
 
 		if (rq->errors == 0)
-			rq->errors = !OK_STAT(stat, READY_STAT, BAD_STAT);
+			rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
 
 		if (task) {
 			struct ide_taskfile *tf = &task->tf;
@@ -373,29 +374,29 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+	if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
 		/* other bits are useless when BUSY */
 		rq->errors |= ERROR_RESET;
-	} else if (stat & ERR_STAT) {
+	} else if (stat & ATA_ERR) {
 		/* err has different meaning on cdrom and tape */
-		if (err == ABRT_ERR) {
+		if (err == ATA_ABORTED) {
 			if (drive->select.b.lba &&
-			    /* some newer drives don't support WIN_SPECIFY */
-			    hwif->tp_ops->read_status(hwif) == WIN_SPECIFY)
+			    /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
+			    hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
 				return ide_stopped;
 		} else if ((err & BAD_CRC) == BAD_CRC) {
 			/* UDMA crc error, just retry the operation */
 			drive->crc_count++;
-		} else if (err & (BBD_ERR | ECC_ERR)) {
+		} else if (err & (ATA_BBK | ATA_UNC)) {
 			/* retries won't help these */
 			rq->errors = ERROR_MAX;
-		} else if (err & TRK0_ERR) {
+		} else if (err & ATA_TRK0NF) {
 			/* help it find track zero */
 			rq->errors |= ERROR_RECAL;
 		}
 	}
 
-	if ((stat & DRQ_STAT) && rq_data_dir(rq) == READ &&
+	if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
 	    (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
 		int nsect = drive->mult_count ? drive->mult_count : 1;
 
@@ -407,7 +408,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
 		return ide_stopped;
 	}
 
-	if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
 		rq->errors |= ERROR_RESET;
 
 	if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
@@ -427,16 +428,16 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
 {
 	ide_hwif_t *hwif = drive->hwif;
 
-	if (stat & BUSY_STAT || ((stat & WRERR_STAT) && !drive->nowerr)) {
+	if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
 		/* other bits are useless when BUSY */
 		rq->errors |= ERROR_RESET;
 	} else {
 		/* add decoding error stuff */
 	}
 
-	if (hwif->tp_ops->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
+	if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
 		/* force an abort */
-		hwif->tp_ops->exec_command(hwif, WIN_IDLEIMMEDIATE);
+		hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
 
 	if (rq->errors >= ERROR_MAX) {
 		ide_kill_rq(drive, rq);
@@ -509,19 +510,19 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 	tf->lbam    = drive->cyl;
 	tf->lbah    = drive->cyl >> 8;
 	tf->device  = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
-	tf->command = WIN_SPECIFY;
+	tf->command = ATA_CMD_INIT_DEV_PARAMS;
 }
 
 static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 {
 	tf->nsect   = drive->sect;
-	tf->command = WIN_RESTORE;
+	tf->command = ATA_CMD_RESTORE;
 }
 
 static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 {
 	tf->nsect   = drive->mult_req;
-	tf->command = WIN_SETMULT;
+	tf->command = ATA_CMD_SET_MULTI;
 }
 
 static ide_startstop_t ide_disk_special(ide_drive_t *drive)
@@ -540,8 +541,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
 		ide_tf_set_restore_cmd(drive, &args.tf);
 	} else if (s->b.set_multmode) {
 		s->b.set_multmode = 0;
-		if (drive->mult_req > drive->id->max_multsect)
-			drive->mult_req = drive->id->max_multsect;
 		ide_tf_set_setmult_cmd(drive, &args.tf);
 	} else if (s->all) {
 		int special = s->all;
@@ -586,9 +585,10 @@ static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
  *	do_special		-	issue some special commands
  *	@drive: drive the command is for
  *
- *	do_special() is used to issue WIN_SPECIFY, WIN_RESTORE, and WIN_SETMULT
- *	commands to a drive.  It used to do much more, but has been scaled
- *	back.
+ *	do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
+ *	ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
+ *
+ *	It used to do much more, but has been scaled back.
  */
 
 static ide_startstop_t do_special (ide_drive_t *drive)
@@ -716,9 +716,49 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
  	return ide_stopped;
 }
 
+int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
+		       int arg)
+{
+	struct request_queue *q = drive->queue;
+	struct request *rq;
+	int ret = 0;
+
+	if (!(setting->flags & DS_SYNC))
+		return setting->set(drive, arg);
+
+	rq = blk_get_request(q, READ, GFP_KERNEL);
+	if (!rq)
+		return -ENOMEM;
+
+	rq->cmd_type = REQ_TYPE_SPECIAL;
+	rq->cmd_len = 5;
+	rq->cmd[0] = REQ_DEVSET_EXEC;
+	*(int *)&rq->cmd[1] = arg;
+	rq->special = setting->set;
+
+	if (blk_execute_rq(q, NULL, rq, 0))
+		ret = rq->errors;
+	blk_put_request(rq);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ide_devset_execute);
+
 static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
 {
 	switch (rq->cmd[0]) {
+	case REQ_DEVSET_EXEC:
+	{
+		int err, (*setfunc)(ide_drive_t *, int) = rq->special;
+
+		err = setfunc(drive, *(int *)&rq->cmd[1]);
+		if (err)
+			rq->errors = err;
+		else
+			err = 1;
+		ide_end_request(drive, err, 0);
+		return ide_stopped;
+	}
 	case REQ_DRIVE_RESET:
 		return ide_do_reset(drive);
 	default:
@@ -766,9 +806,7 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
  *	start_request	-	start of I/O and command issuing for IDE
  *
  *	start_request() initiates handling of a new I/O request. It
- *	accepts commands and I/O (read/write) requests. It also does
- *	the final remapping for weird stuff like EZDrive. Once 
- *	device mapper can work sector level the EZDrive stuff can go away
+ *	accepts commands and I/O (read/write) requests.
  *
  *	FIXME: this function needs a rename
  */
@@ -776,7 +814,6 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 {
 	ide_startstop_t startstop;
-	sector_t block;
 
 	BUG_ON(!blk_rq_started(rq));
 
@@ -791,21 +828,12 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 		goto kill_rq;
 	}
 
-	block    = rq->sector;
-	if (blk_fs_request(rq) &&
-	    (drive->media == ide_disk || drive->media == ide_floppy)) {
-		block += drive->sect0;
-	}
-	/* Yecch - this will shift the entire interval,
-	   possibly killing some innocent following sector */
-	if (block == 0 && drive->remap_0_to_1 == 1)
-		block = 1;  /* redirect MBR access to EZ-Drive partn table */
-
 	if (blk_pm_request(rq))
 		ide_check_pm_state(drive, rq);
 
 	SELECT_DRIVE(drive);
-	if (ide_wait_stat(&startstop, drive, drive->ready_stat, BUSY_STAT|DRQ_STAT, WAIT_READY)) {
+	if (ide_wait_stat(&startstop, drive, drive->ready_stat,
+			  ATA_BUSY | ATA_DRQ, WAIT_READY)) {
 		printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
 		return startstop;
 	}
@@ -844,7 +872,8 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 			return ide_special_rq(drive, rq);
 
 		drv = *(ide_driver_t **)rq->rq_disk->private_data;
-		return drv->do_request(drive, rq, block);
+
+		return drv->do_request(drive, rq, rq->sector);
 	}
 	return do_special(drive);
 kill_rq:
@@ -1325,7 +1354,7 @@ static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
 		if (hwif->irq == irq) {
 			stat = hwif->tp_ops->read_status(hwif);
 
-			if (!OK_STAT(stat, READY_STAT, BAD_STAT)) {
+			if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
 				/* Try to not flood the console with msgs */
 				static unsigned long last_msgtime, count;
 				++count;