summaryrefslogtreecommitdiffstats
path: root/drivers/ide/cs5530.c
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/cs5530.c
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
downloadlinux-2bfba3c444fe8b2ab1c38112a89d8f03b61136ca.tar.bz2
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/cs5530.c')
-rw-r--r--drivers/ide/cs5530.c294
1 files changed, 294 insertions, 0 deletions
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c
new file mode 100644
index 000000000000..53f079cc00af
--- /dev/null
+++ b/drivers/ide/cs5530.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2000 Mark Lord <mlord@pobox.com>
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ *
+ * May be copied or modified under the terms of the GNU General Public License
+ *
+ * Development of this chipset driver was funded
+ * by the nice folks at National Semiconductor.
+ *
+ * Documentation:
+ * CS5530 documentation available from National Semiconductor.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/io.h>
+
+#define DRV_NAME "cs5530"
+
+/*
+ * Here are the standard PIO mode 0-4 timings for each "format".
+ * Format-0 uses fast data reg timings, with slower command reg timings.
+ * Format-1 uses fast timings for all registers, but won't work with all drives.
+ */
+static unsigned int cs5530_pio_timings[2][5] = {
+ {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
+ {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
+};
+
+/*
+ * After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
+ */
+#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
+#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
+
+/**
+ * cs5530_set_pio_mode - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
+ *
+ * Handles setting of PIO mode for the chipset.
+ *
+ * The init_hwif_cs5530() routine guarantees that all drives
+ * will have valid default PIO timings set up before we get here.
+ */
+
+static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+ unsigned long basereg = CS5530_BASEREG(drive->hwif);
+ unsigned int format = (inl(basereg + 4) >> 31) & 1;
+
+ outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
+}
+
+/**
+ * cs5530_udma_filter - UDMA filter
+ * @drive: drive
+ *
+ * cs5530_udma_filter() does UDMA mask filtering for the given drive
+ * taking into the consideration capabilities of the mate device.
+ *
+ * The CS5530 specifies that two drives sharing a cable cannot mix
+ * UDMA/MDMA. It has to be one or the other, for the pair, though
+ * different timings can still be chosen for each drive. We could
+ * set the appropriate timing bits on the fly, but that might be
+ * a bit confusing. So, for now we statically handle this requirement
+ * by looking at our mate drive to see what it is capable of, before
+ * choosing a mode for our own drive.
+ *
+ * Note: This relies on the fact we never fail from UDMA to MWDMA2
+ * but instead drop to PIO.
+ */
+
+static u8 cs5530_udma_filter(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *mate = ide_get_pair_dev(drive);
+ u16 *mateid = mate->id;
+ u8 mask = hwif->ultra_mask;
+
+ if (mate == NULL)
+ goto out;
+
+ if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
+ if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
+ (mateid[ATA_ID_UDMA_MODES] & 7))
+ goto out;
+ if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
+ (mateid[ATA_ID_MWDMA_MODES] & 7))
+ mask = 0;
+ }
+out:
+ return mask;
+}
+
+static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
+{
+ unsigned long basereg;
+ unsigned int reg, timings = 0;
+
+ switch (mode) {
+ case XFER_UDMA_0: timings = 0x00921250; break;
+ case XFER_UDMA_1: timings = 0x00911140; break;
+ case XFER_UDMA_2: timings = 0x00911030; break;
+ case XFER_MW_DMA_0: timings = 0x00077771; break;
+ case XFER_MW_DMA_1: timings = 0x00012121; break;
+ case XFER_MW_DMA_2: timings = 0x00002020; break;
+ }
+ basereg = CS5530_BASEREG(drive->hwif);
+ reg = inl(basereg + 4); /* get drive0 config register */
+ timings |= reg & 0x80000000; /* preserve PIO format bit */
+ if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
+ outl(timings, basereg + 4); /* write drive0 config register */
+ } else {
+ if (timings & 0x00100000)
+ reg |= 0x00100000; /* enable UDMA timings for both drives */
+ else
+ reg &= ~0x00100000; /* disable UDMA timings for both drives */
+ outl(reg, basereg + 4); /* write drive0 config register */
+ outl(timings, basereg + 12); /* write drive1 config register */
+ }
+}
+
+/**
+ * init_chipset_5530 - set up 5530 bridge
+ * @dev: PCI device
+ *
+ * Initialize the cs5530 bridge for reliable IDE DMA operation.
+ */
+
+static unsigned int init_chipset_cs5530(struct pci_dev *dev)
+{
+ struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
+
+ if (pci_resource_start(dev, 4) == 0)
+ return -EFAULT;
+
+ dev = NULL;
+ while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
+ switch (dev->device) {
+ case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
+ master_0 = pci_dev_get(dev);
+ break;
+ case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
+ cs5530_0 = pci_dev_get(dev);
+ break;
+ }
+ }
+ if (!master_0) {
+ printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
+ goto out;
+ }
+ if (!cs5530_0) {
+ printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
+ goto out;
+ }
+
+ /*
+ * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
+ * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
+ */
+
+ pci_set_master(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
+
+ /*
+ * Set PCI CacheLineSize to 16-bytes:
+ * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
+ */
+
+ pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
+
+ /*
+ * Disable trapping of UDMA register accesses (Win98 hack):
+ * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
+ */
+
+ pci_write_config_word(cs5530_0, 0xd0, 0x5006);
+
+ /*
+ * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
+ * The other settings are what is necessary to get the register
+ * into a sane state for IDE DMA operation.
+ */
+
+ pci_write_config_byte(master_0, 0x40, 0x1e);
+
+ /*
+ * Set max PCI burst size (16-bytes seems to work best):
+ * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
+ * all others: clear bit-1 at 0x41, and do:
+ * 128bytes: OR 0x00 at 0x41
+ * 256bytes: OR 0x04 at 0x41
+ * 512bytes: OR 0x08 at 0x41
+ * 1024bytes: OR 0x0c at 0x41
+ */
+
+ pci_write_config_byte(master_0, 0x41, 0x14);
+
+ /*
+ * These settings are necessary to get the chip
+ * into a sane state for IDE DMA operation.
+ */
+
+ pci_write_config_byte(master_0, 0x42, 0x00);
+ pci_write_config_byte(master_0, 0x43, 0xc1);
+
+out:
+ pci_dev_put(master_0);
+ pci_dev_put(cs5530_0);
+ return 0;
+}
+
+/**
+ * init_hwif_cs5530 - initialise an IDE channel
+ * @hwif: IDE to initialize
+ *
+ * This gets invoked by the IDE driver once for each channel. It
+ * performs channel-specific pre-initialization before drive probing.
+ */
+
+static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
+{
+ unsigned long basereg;
+ u32 d0_timings;
+
+ basereg = CS5530_BASEREG(hwif);
+ d0_timings = inl(basereg + 0);
+ if (CS5530_BAD_PIO(d0_timings))
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
+ if (CS5530_BAD_PIO(inl(basereg + 8)))
+ outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
+}
+
+static const struct ide_port_ops cs5530_port_ops = {
+ .set_pio_mode = cs5530_set_pio_mode,
+ .set_dma_mode = cs5530_set_dma_mode,
+ .udma_filter = cs5530_udma_filter,
+};
+
+static const struct ide_port_info cs5530_chipset __devinitdata = {
+ .name = DRV_NAME,
+ .init_chipset = init_chipset_cs5530,
+ .init_hwif = init_hwif_cs5530,
+ .port_ops = &cs5530_port_ops,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_POST_SET_MODE,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
+};
+
+static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_pci_init_one(dev, &cs5530_chipset, NULL);
+}
+
+static const struct pci_device_id cs5530_pci_tbl[] = {
+ { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 },
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
+
+static struct pci_driver cs5530_pci_driver = {
+ .name = "CS5530 IDE",
+ .id_table = cs5530_pci_tbl,
+ .probe = cs5530_init_one,
+ .remove = ide_pci_remove,
+ .suspend = ide_pci_suspend,
+ .resume = ide_pci_resume,
+};
+
+static int __init cs5530_ide_init(void)
+{
+ return ide_pci_register_driver(&cs5530_pci_driver);
+}
+
+static void __exit cs5530_ide_exit(void)
+{
+ pci_unregister_driver(&cs5530_pci_driver);
+}
+
+module_init(cs5530_ide_init);
+module_exit(cs5530_ide_exit);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
+MODULE_LICENSE("GPL");