summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-11-23 11:59:26 -1000
committerLinus Torvalds <torvalds@linux-foundation.org>2012-11-23 11:59:26 -1000
commit33f145934025e2f51e866993f09e04a1d1650649 (patch)
tree82fc648488e32ef43c2e97da78a0a5d1064e76ef /drivers/i2c
parentf470b8c25815d94a200a7248bf3e04df6e3dea42 (diff)
parent958f9889950ef257f601c4902137caff291d5dd7 (diff)
downloadlinux-33f145934025e2f51e866993f09e04a1d1650649.tar.bz2
Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux
Pull i2c fixes from Wolfram Sang: "Bugfixes for the i2c subsystem. Except for a few one-liners, there is mainly one revert because of an overlooked dependency. Since there is no linux-next at the moment, I did some extra testing, and all was fine for me." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: mxs: Handle i2c DMA failure properly i2c: s3c2410: Fix code to free gpios i2c: omap: ensure writes to dev->buf_len are ordered Revert "ARM: OMAP: convert I2C driver to PM QoS for MPU latency constraints" i2c: at91: fix SMBus quick command
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-at91.c7
-rw-r--r--drivers/i2c/busses/i2c-mxs.c2
-rw-r--r--drivers/i2c/busses/i2c-omap.c36
-rw-r--r--drivers/i2c/busses/i2c-s3c2410.c1
4 files changed, 26 insertions, 20 deletions
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index aa59a254be2c..c02bf208084f 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -39,6 +39,7 @@
#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */
#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */
#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */
+#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */
#define AT91_TWI_SWRST 0x0080 /* Software Reset */
#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
@@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
INIT_COMPLETION(dev->cmd_complete);
dev->transfer_status = 0;
- if (dev->msg->flags & I2C_M_RD) {
+
+ if (!dev->buf_len) {
+ at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
+ at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
+ } else if (dev->msg->flags & I2C_M_RD) {
unsigned start_flags = AT91_TWI_START;
if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) {
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 286ca1917820..0670da79ee5e 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -287,12 +287,14 @@ read_init_dma_fail:
select_init_dma_fail:
dma_unmap_sg(i2c->dev, &i2c->sg_io[0], 1, DMA_TO_DEVICE);
select_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
/* Write failpath. */
write_init_dma_fail:
dma_unmap_sg(i2c->dev, i2c->sg_io, 2, DMA_TO_DEVICE);
write_init_pio_fail:
+ dmaengine_terminate_all(i2c->dmach);
return -EINVAL;
}
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index db31eaed6ea5..3525c9e62cb0 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -43,7 +43,6 @@
#include <linux/slab.h>
#include <linux/i2c-omap.h>
#include <linux/pm_runtime.h>
-#include <linux/pm_qos.h>
/* I2C controller revisions */
#define OMAP_I2C_OMAP1_REV_2 0x20
@@ -187,8 +186,9 @@ struct omap_i2c_dev {
int reg_shift; /* bit shift for I2C register addresses */
struct completion cmd_complete;
struct resource *ioarea;
- u32 latency; /* maximum MPU wkup latency */
- struct pm_qos_request pm_qos_request;
+ u32 latency; /* maximum mpu wkup latency */
+ void (*set_mpu_wkup_lat)(struct device *dev,
+ long latency);
u32 speed; /* Speed of bus in kHz */
u32 dtrev; /* extra revision from DT */
u32 flags;
@@ -494,7 +494,9 @@ static void omap_i2c_resize_fifo(struct omap_i2c_dev *dev, u8 size, bool is_rx)
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->threshold) / (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->threshold) /
+ (1000 * dev->speed / 8);
}
/*
@@ -522,6 +524,9 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
dev->buf = msg->buf;
dev->buf_len = msg->len;
+ /* make sure writes to dev->buf_len are ordered */
+ barrier();
+
omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
/* Clear the FIFO Buffers */
@@ -579,7 +584,6 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
*/
timeout = wait_for_completion_timeout(&dev->cmd_complete,
OMAP_I2C_TIMEOUT);
- dev->buf_len = 0;
if (timeout == 0) {
dev_err(dev->dev, "controller timed out\n");
omap_i2c_init(dev);
@@ -629,16 +633,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
if (r < 0)
goto out;
- /*
- * When waiting for completion of a i2c transfer, we need to
- * set a wake up latency constraint for the MPU. This is to
- * ensure quick enough wakeup from idle, when transfer
- * completes.
- */
- if (dev->latency)
- pm_qos_add_request(&dev->pm_qos_request,
- PM_QOS_CPU_DMA_LATENCY,
- dev->latency);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, dev->latency);
for (i = 0; i < num; i++) {
r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
@@ -646,8 +642,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
break;
}
- if (dev->latency)
- pm_qos_remove_request(&dev->pm_qos_request);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->set_mpu_wkup_lat(dev->dev, -1);
if (r == 0)
r = num;
@@ -1104,6 +1100,7 @@ omap_i2c_probe(struct platform_device *pdev)
} else if (pdata != NULL) {
dev->speed = pdata->clkrate;
dev->flags = pdata->flags;
+ dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
dev->dtrev = pdata->rev;
}
@@ -1159,8 +1156,9 @@ omap_i2c_probe(struct platform_device *pdev)
dev->b_hw = 1; /* Enable hardware fixes */
/* calculate wakeup latency constraint for MPU */
- dev->latency = (1000000 * dev->fifo_size) /
- (1000 * dev->speed / 8);
+ if (dev->set_mpu_wkup_lat != NULL)
+ dev->latency = (1000000 * dev->fifo_size) /
+ (1000 * dev->speed / 8);
}
/* reset ASAP, clearing any IRQs */
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 3e0335f1fc60..9d902725bac9 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -806,6 +806,7 @@ static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
dev_err(i2c->dev, "invalid gpio[%d]: %d\n", idx, gpio);
goto free_gpio;
}
+ i2c->gpios[idx] = gpio;
ret = gpio_request(gpio, "i2c-bus");
if (ret) {