summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-08-13 18:41:00 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-08-13 18:41:00 -0700
commite764a1e32337aaf325fc5b14a5bbd06eabba4699 (patch)
treedc4ba42330c3f67a0da1bb470c23c3e889e9822b /drivers/i2c
parentdddcbc139e96bd18d8c65ef7b7e440f0d32457c2 (diff)
parentb1eef236f50ba6afea680da039ef3a2ca9c43d11 (diff)
downloadlinux-e764a1e32337aaf325fc5b14a5bbd06eabba4699.tar.bz2
Merge branch 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - bus recovery can now be given a pinctrl handle and the I2C core will do all the steps to switch to/from GPIO which can save quite some boilerplate code from drivers - "fallthrough" conversion - driver updates, mostly ID additions * 'i2c/for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (32 commits) i2c: iproc: fix race between client unreg and isr i2c: eg20t: use generic power management i2c: eg20t: Drop PCI wakeup calls from .suspend/.resume i2c: mediatek: Fix i2c_spec_values description i2c: mediatek: Add i2c compatible for MediaTek MT8192 dt-bindings: i2c: update bindings for MT8192 SoC i2c: mediatek: Add access to more than 8GB dram in i2c driver i2c: mediatek: Add apdma sync in i2c driver i2c: i801: Add support for Intel Tiger Lake PCH-H i2c: i801: Add support for Intel Emmitsburg PCH i2c: bcm2835: Replace HTTP links with HTTPS ones Documentation: i2c: dev: 'block process call' is supported i2c: at91: Move to generic GPIO bus recovery i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs i2c: core: add generic I2C GPIO recovery dt-bindings: i2c: add generic properties for GPIO bus recovery i2c: rcar: avoid race when unregistering slave i2c: tegra: Avoid tegra_i2c_init_dma() for Tegra210 vi i2c i2c: tegra: Fix runtime resume to re-init VI I2C i2c: tegra: Fix the error path in tegra_i2c_runtime_resume ...
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c4
-rw-r--r--drivers/i2c/busses/Kconfig1
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c8
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c6
-rw-r--r--drivers/i2c/busses/i2c-amd8111.c2
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c4
-rw-r--r--drivers/i2c/busses/i2c-at91-master.c69
-rw-r--r--drivers/i2c/busses/i2c-at91.h3
-rw-r--r--drivers/i2c/busses/i2c-bcm-iproc.c13
-rw-r--r--drivers/i2c/busses/i2c-bcm2835.c2
-rw-r--r--drivers/i2c/busses/i2c-designware-pcidrv.c2
-rw-r--r--drivers/i2c/busses/i2c-digicolor.c2
-rw-r--r--drivers/i2c/busses/i2c-eg20t.c39
-rw-r--r--drivers/i2c/busses/i2c-emev2.c3
-rw-r--r--drivers/i2c/busses/i2c-fsi.c2
-rw-r--r--drivers/i2c/busses/i2c-i801.c19
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c86
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c9
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c3
-rw-r--r--drivers/i2c/busses/i2c-piix4.c4
-rw-r--r--drivers/i2c/busses/i2c-pnx.c3
-rw-r--r--drivers/i2c/busses/i2c-rcar.c15
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c39
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c3
-rw-r--r--drivers/i2c/busses/i2c-sibyte.c3
-rw-r--r--drivers/i2c/busses/i2c-sirf.c4
-rw-r--r--drivers/i2c/busses/i2c-synquacer.c3
-rw-r--r--drivers/i2c/busses/i2c-tegra.c101
-rw-r--r--drivers/i2c/busses/i2c-viapro.c8
-rw-r--r--drivers/i2c/busses/scx200_acb.c2
-rw-r--r--drivers/i2c/i2c-core-base.c158
-rw-r--r--drivers/i2c/i2c-dev.c4
-rw-r--r--drivers/i2c/i2c-slave-eeprom.c2
33 files changed, 379 insertions, 247 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 388978775be0..710fbef9a9c2 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -542,8 +542,8 @@ int i2c_pca_add_numbered_bus(struct i2c_adapter *adap)
}
EXPORT_SYMBOL(i2c_pca_add_numbered_bus);
-MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>, "
- "Wolfram Sang <kernel@pengutronix.de>");
+MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
+MODULE_AUTHOR("Wolfram Sang <kernel@pengutronix.de>");
MODULE_DESCRIPTION("I2C-Bus PCA9564/PCA9665 algorithm");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 88639e52c73a..293e7a0760e7 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -146,6 +146,7 @@ config I2C_I801
Elkhart Lake (PCH)
Tiger Lake (PCH)
Jasper Lake (SOC)
+ Emmitsburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index a43deea390f5..fb93152845f4 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -519,9 +519,9 @@ static struct pci_driver ali1535_driver = {
module_pci_driver(ali1535_driver);
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "Mark D. Studebaker <mdsxyz123@yahoo.com> "
- "and Dan Eaton <dan.eaton@rocketlogix.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Dan Eaton <dan.eaton@rocketlogix.com>");
MODULE_DESCRIPTION("ALI1535 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 02185a1cfa77..cc58feacd082 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -502,8 +502,8 @@ static struct pci_driver ali15x3_driver = {
module_pci_driver(ali15x3_driver);
-MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
- "Philip Edelbrock <phil@netroedge.com>, "
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("ALI15X3 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index 2b14fef5bf26..34862ad3423e 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -381,7 +381,7 @@ static s32 amd8111_access(struct i2c_adapter * adap, u16 addr,
if (status)
return status;
len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
- /* fall through */
+ fallthrough;
case I2C_SMBUS_I2C_BLOCK_DATA:
for (i = 0; i < len; i++) {
status = amd_ec_read(smbus, AMD_SMB_DATA + i,
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index f51702d86a90..31268074c422 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -504,7 +504,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
goto error_and_stop;
}
irq_handled |= ASPEED_I2CD_INTR_TX_ACK;
- /* fall through */
+ fallthrough;
case ASPEED_I2C_MASTER_TX_FIRST:
if (bus->buf_index < msg->len) {
bus->master_state = ASPEED_I2C_MASTER_TX;
@@ -520,7 +520,7 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
/* RX may not have completed yet (only address cycle) */
if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
goto out_no_complete;
- /* fall through */
+ fallthrough;
case ASPEED_I2C_MASTER_RX:
if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
dev_err(bus->dev, "master failed to RX\n");
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index 363d540a8345..66864f9cf7ac 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -816,79 +816,16 @@ error:
return ret;
}
-static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
-{
- struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-}
-
-static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
-{
- struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-}
-
static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
struct at91_twi_dev *dev)
{
struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
- dev->pinctrl = devm_pinctrl_get(&pdev->dev);
- if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
+ rinfo->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (!rinfo->pinctrl || IS_ERR(rinfo->pinctrl)) {
dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
- return PTR_ERR(dev->pinctrl);
+ return PTR_ERR(rinfo->pinctrl);
}
-
- dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
- PINCTRL_STATE_DEFAULT);
- dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
- "gpio");
- if (IS_ERR(dev->pinctrl_pins_default) ||
- IS_ERR(dev->pinctrl_pins_gpio)) {
- dev_info(&pdev->dev, "pinctrl states incomplete for recovery\n");
- return -EINVAL;
- }
-
- /*
- * pins will be taken as GPIO, so we might as well inform pinctrl about
- * this and move the state to GPIO
- */
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-
- rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
- if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
- GPIOD_OUT_HIGH_OPEN_DRAIN);
- if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- if (IS_ERR(rinfo->sda_gpiod) ||
- IS_ERR(rinfo->scl_gpiod)) {
- dev_info(&pdev->dev, "recovery information incomplete\n");
- if (!IS_ERR(rinfo->sda_gpiod)) {
- gpiod_put(rinfo->sda_gpiod);
- rinfo->sda_gpiod = NULL;
- }
- if (!IS_ERR(rinfo->scl_gpiod)) {
- gpiod_put(rinfo->scl_gpiod);
- rinfo->scl_gpiod = NULL;
- }
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
- return -EINVAL;
- }
-
- /* change the state of the pins back to their default state */
- pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-
- dev_info(&pdev->dev, "using scl, sda for recovery\n");
-
- rinfo->prepare_recovery = at91_prepare_twi_recovery;
- rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
- rinfo->recover_bus = i2c_generic_scl_recovery;
dev->adapter.bus_recovery_info = rinfo;
return 0;
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 7e7b4955ca7f..eae673ae786c 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -157,9 +157,6 @@ struct at91_twi_dev {
struct at91_twi_dma dma;
bool slave_detected;
struct i2c_bus_recovery_info rinfo;
- struct pinctrl *pinctrl;
- struct pinctrl_state *pinctrl_pins_default;
- struct pinctrl_state *pinctrl_pins_gpio;
#ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
unsigned smr;
struct i2c_client *slave;
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 8a3c98866fb7..688e92818821 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -1078,7 +1078,7 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
if (!iproc_i2c->slave)
return -EINVAL;
- iproc_i2c->slave = NULL;
+ disable_irq(iproc_i2c->irq);
/* disable all slave interrupts */
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
@@ -1091,6 +1091,17 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
+ /* flush TX/RX FIFOs */
+ tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
+ iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
+
+ /* clear all pending slave interrupts */
+ iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
+
+ iproc_i2c->slave = NULL;
+
+ enable_irq(iproc_i2c->irq);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index d9b86fcc3825..5dc519516292 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -392,7 +392,7 @@ static const struct i2c_algorithm bcm2835_i2c_algo = {
/*
* The BCM2835 was reported to have problems with clock stretching:
- * http://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
+ * https://www.advamation.com/knowhow/raspberrypi/rpi-i2c-bug.html
* https://www.raspberrypi.org/forums/viewtopic.php?p=146272
*/
static const struct i2c_adapter_quirks bcm2835_i2c_quirks = {
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index 8522134f9ea9..55c83a7a24f3 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -90,7 +90,7 @@ static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
switch (pdev->device) {
case 0x0817:
dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
- /* fall through */
+ fallthrough;
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 332f00437479..f67639dc74b7 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -187,7 +187,7 @@ static irqreturn_t dc_i2c_irq(int irq, void *dev_id)
break;
}
i2c->state = STATE_WRITE;
- /* fall through */
+ fallthrough;
case STATE_WRITE:
if (i2c->msgbuf_ptr < i2c->msg->len)
dc_i2c_write_buf(i2c);
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 73f139690e4e..843b31a0f752 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -846,11 +846,10 @@ static void pch_i2c_remove(struct pci_dev *pdev)
kfree(adap_info);
}
-#ifdef CONFIG_PM
-static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_i2c_suspend(struct device *dev)
{
- int ret;
int i;
+ struct pci_dev *pdev = to_pci_dev(dev);
struct adapter_info *adap_info = pci_get_drvdata(pdev);
void __iomem *p = adap_info->pch_data[0].pch_base_address;
@@ -872,34 +871,13 @@ static int pch_i2c_suspend(struct pci_dev *pdev, pm_message_t state)
ioread32(p + PCH_I2CSR), ioread32(p + PCH_I2CBUFSTA),
ioread32(p + PCH_I2CESRSTA));
- ret = pci_save_state(pdev);
-
- if (ret) {
- pch_pci_err(pdev, "pci_save_state\n");
- return ret;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
-static int pch_i2c_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_i2c_resume(struct device *dev)
{
int i;
- struct adapter_info *adap_info = pci_get_drvdata(pdev);
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- if (pci_enable_device(pdev) < 0) {
- pch_pci_err(pdev, "pch_i2c_resume:pci_enable_device FAILED\n");
- return -EIO;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
+ struct adapter_info *adap_info = dev_get_drvdata(dev);
for (i = 0; i < adap_info->ch_num; i++)
pch_i2c_init(&adap_info->pch_data[i]);
@@ -908,18 +886,15 @@ static int pch_i2c_resume(struct pci_dev *pdev)
return 0;
}
-#else
-#define pch_i2c_suspend NULL
-#define pch_i2c_resume NULL
-#endif
+
+static SIMPLE_DEV_PM_OPS(pch_i2c_pm_ops, pch_i2c_suspend, pch_i2c_resume);
static struct pci_driver pch_pcidriver = {
.name = KBUILD_MODNAME,
.id_table = pch_pcidev_id,
.probe = pch_i2c_probe,
.remove = pch_i2c_remove,
- .suspend = pch_i2c_suspend,
- .resume = pch_i2c_resume
+ .driver.pm = &pch_i2c_pm_ops,
};
module_pci_driver(pch_pcidriver);
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 1a319352e51b..a08554c1a570 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -442,6 +442,7 @@ static struct platform_driver em_i2c_driver = {
module_platform_driver(em_i2c_driver);
MODULE_DESCRIPTION("EMEV2 I2C bus driver");
-MODULE_AUTHOR("Ian Molton and Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_AUTHOR("Ian Molton");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, em_i2c_ids);
diff --git a/drivers/i2c/busses/i2c-fsi.c b/drivers/i2c/busses/i2c-fsi.c
index 977d6f524649..10332693edf0 100644
--- a/drivers/i2c/busses/i2c-fsi.c
+++ b/drivers/i2c/busses/i2c-fsi.c
@@ -703,7 +703,7 @@ static int fsi_i2c_probe(struct device *dev)
for (port_no = 0; port_no < ports; port_no++) {
np = fsi_i2c_find_port_of_node(dev->of_node, port_no);
- if (np && !of_device_is_available(np))
+ if (!of_device_is_available(np))
continue;
port = kzalloc(sizeof(*port), GFP_KERNEL);
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index fea644921a76..e32ef3f01fe8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -54,6 +54,7 @@
* Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
+ * Emmitsburg (PCH) 0x1bc9 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
@@ -67,6 +68,7 @@
* Comet Lake-H (PCH) 0x06a3 32 hard yes yes yes
* Elkhart Lake (PCH) 0x4b23 32 hard yes yes yes
* Tiger Lake-LP (PCH) 0xa0a3 32 hard yes yes yes
+ * Tiger Lake-H (PCH) 0x43a3 32 hard yes yes yes
* Jasper Lake (SOC) 0x4da3 32 hard yes yes yes
* Comet Lake-V (PCH) 0xa3a3 32 hard yes yes yes
*
@@ -207,6 +209,7 @@
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS 0x1bc9
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
/* Patsburg also has three 'Integrated Device Function' SMBus controllers */
@@ -221,6 +224,7 @@
#define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS 0x31d4
#define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS 0x34a3
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS 0x43a3
#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS 0x4b23
#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS 0x4da3
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
@@ -1062,6 +1066,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
@@ -1074,6 +1079,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
{ 0, }
};
@@ -1748,7 +1754,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS:
case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
+ case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS:
case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
+ case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
@@ -1765,19 +1773,19 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
priv->features |= FEATURE_IDF;
- /* fall through */
+ fallthrough;
default:
priv->features |= FEATURE_BLOCK_PROC;
priv->features |= FEATURE_I2C_BLOCK_READ;
priv->features |= FEATURE_IRQ;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801DB_3:
priv->features |= FEATURE_SMBUS_PEC;
priv->features |= FEATURE_BLOCK_BUFFER;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801CA_3:
priv->features |= FEATURE_HOST_NOTIFY;
- /* fall through */
+ fallthrough;
case PCI_DEVICE_ID_INTEL_82801BA_2:
case PCI_DEVICE_ID_INTEL_82801AB_3:
case PCI_DEVICE_ID_INTEL_82801AA_3:
@@ -1986,7 +1994,8 @@ static void __exit i2c_i801_exit(void)
pci_unregister_driver(&i801_driver);
}
-MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index deef69e56906..efc14041d45b 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -48,11 +48,13 @@
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
+#define I2C_DMA_ASYNC_MODE 0x0004
+#define I2C_DMA_SKIP_CONFIG 0x0010
+#define I2C_DMA_DIR_CHANGE 0x0200
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_HARD_RST 0x0002
-#define I2C_DMA_4G_MODE 0x0001
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
@@ -201,10 +203,11 @@ struct mtk_i2c_compatible {
unsigned char dcm: 1;
unsigned char auto_restart: 1;
unsigned char aux_len_reg: 1;
- unsigned char support_33bits: 1;
unsigned char timing_adjust: 1;
unsigned char dma_sync: 1;
unsigned char ltiming_adjust: 1;
+ unsigned char apdma_sync: 1;
+ unsigned char max_dma_support;
};
struct mtk_i2c_ac_timing {
@@ -250,14 +253,13 @@ struct mtk_i2c {
/**
* struct i2c_spec_values:
- * min_low_ns: min LOW period of the SCL clock
- * min_su_sta_ns: min set-up time for a repeated START condition
- * max_hd_dat_ns: max data hold time
- * min_su_dat_ns: min data set-up time
+ * @min_low_ns: min LOW period of the SCL clock
+ * @min_su_sta_ns: min set-up time for a repeated START condition
+ * @max_hd_dat_ns: max data hold time
+ * @min_su_dat_ns: min data set-up time
*/
struct i2c_spec_values {
unsigned int min_low_ns;
- unsigned int min_high_ns;
unsigned int min_su_sta_ns;
unsigned int max_hd_dat_ns;
unsigned int min_su_dat_ns;
@@ -307,10 +309,11 @@ static const struct mtk_i2c_compatible mt2712_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt6577_compat = {
@@ -320,10 +323,11 @@ static const struct mtk_i2c_compatible mt6577_compat = {
.dcm = 1,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt6589_compat = {
@@ -333,10 +337,11 @@ static const struct mtk_i2c_compatible mt6589_compat = {
.dcm = 0,
.auto_restart = 0,
.aux_len_reg = 0,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt7622_compat = {
@@ -346,10 +351,11 @@ static const struct mtk_i2c_compatible mt7622_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 0,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 32,
};
static const struct mtk_i2c_compatible mt8173_compat = {
@@ -358,10 +364,11 @@ static const struct mtk_i2c_compatible mt8173_compat = {
.dcm = 1,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 0,
.dma_sync = 0,
.ltiming_adjust = 0,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
};
static const struct mtk_i2c_compatible mt8183_compat = {
@@ -371,10 +378,25 @@ static const struct mtk_i2c_compatible mt8183_compat = {
.dcm = 0,
.auto_restart = 1,
.aux_len_reg = 1,
- .support_33bits = 1,
.timing_adjust = 1,
.dma_sync = 1,
.ltiming_adjust = 1,
+ .apdma_sync = 0,
+ .max_dma_support = 33,
+};
+
+static const struct mtk_i2c_compatible mt8192_compat = {
+ .quirks = &mt8183_i2c_quirks,
+ .regs = mt_i2c_regs_v2,
+ .pmic_i2c = 0,
+ .dcm = 0,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .timing_adjust = 1,
+ .dma_sync = 1,
+ .ltiming_adjust = 1,
+ .apdma_sync = 1,
+ .max_dma_support = 36,
};
static const struct of_device_id mtk_i2c_of_match[] = {
@@ -384,6 +406,7 @@ static const struct of_device_id mtk_i2c_of_match[] = {
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
+ { .compatible = "mediatek,mt8192-i2c", .data = &mt8192_compat },
{}
};
MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
@@ -786,11 +809,6 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
-static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
-{
- return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
-}
-
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -798,6 +816,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
u16 start_reg;
u16 control_reg;
u16 restart_flag = 0;
+ u16 dma_sync = 0;
u32 reg_4g_mode;
u8 *dma_rd_buf = NULL;
u8 *dma_wr_buf = NULL;
@@ -851,10 +870,16 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
}
+ if (i2c->dev_comp->apdma_sync) {
+ dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
+ if (i2c->op == I2C_MASTER_WRRD)
+ dma_sync |= I2C_DMA_DIR_CHANGE;
+ }
+
/* Prepare buffer data to start transfer */
if (i2c->op == I2C_MASTER_RD) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_RX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_rd_buf)
@@ -868,8 +893,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -877,7 +902,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
} else if (i2c->op == I2C_MASTER_WR) {
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CON_TX | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
@@ -891,8 +916,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
}
@@ -900,7 +925,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
} else {
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
- writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
+ writel(I2C_DMA_CLR_FLAG | dma_sync, i2c->pdmabase + OFFSET_CON);
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
if (!dma_wr_buf)
@@ -937,11 +962,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
return -ENOMEM;
}
- if (i2c->dev_comp->support_33bits) {
- reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+ if (i2c->dev_comp->max_dma_support > 32) {
+ reg_4g_mode = upper_32_bits(wpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
- reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
+ reg_4g_mode = upper_32_bits(rpaddr);
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
}
@@ -1215,8 +1240,9 @@ static int mtk_i2c_probe(struct platform_device *pdev)
return -EINVAL;
}
- if (i2c->dev_comp->support_33bits) {
- ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
+ if (i2c->dev_comp->max_dma_support > 32) {
+ ret = dma_set_mask(&pdev->dev,
+ DMA_BIT_MASK(i2c->dev_comp->max_dma_support));
if (ret) {
dev_err(&pdev->dev, "dma_set_mask return error.\n");
return ret;
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 829b8c98ae51..8d9d4ffdcd24 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -251,7 +251,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */
if ((drv_data->bytes_left == 0)
@@ -282,14 +282,14 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
if (drv_data->bytes_left == 0) {
drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
drv_data->state = MV64XXX_I2C_STATE_IDLE;
break;
}
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */
if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK)
drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
@@ -417,8 +417,7 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
"mv64xxx_i2c_do_action: Invalid action: %d\n",
drv_data->action);
drv_data->rc = -EIO;
-
- /* FALLTHRU */
+ fallthrough;
case MV64XXX_I2C_ACTION_SEND_STOP:
drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index e1e8d4ef9aa7..d4b1b0865f67 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -1122,6 +1122,7 @@ static void __exit nmk_i2c_exit(void)
subsys_initcall(nmk_i2c_init);
module_exit(nmk_i2c_exit);
-MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
+MODULE_AUTHOR("Sachin Verma");
+MODULE_AUTHOR("Srinidhi KASAGAR");
MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 69740a4ff1db..8c1b31ed0c42 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -1032,7 +1032,7 @@ static struct pci_driver piix4_driver = {
module_pci_driver(piix4_driver);
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Philip Edelbrock <phil@netroedge.com>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>");
MODULE_DESCRIPTION("PIIX4 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d7207c10f1d..8c4ec7f13f5a 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -781,7 +781,8 @@ static void __exit i2c_adap_pnx_exit(void)
platform_driver_unregister(&i2c_pnx_driver);
}
-MODULE_AUTHOR("Vitaly Wool, Dennis Kovalev <source@mvista.com>");
+MODULE_AUTHOR("Vitaly Wool");
+MODULE_AUTHOR("Dennis Kovalev <source@mvista.com>");
MODULE_DESCRIPTION("I2C driver for Philips IP3204-based I2C busses");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pnx-i2c");
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 2e3e1bb75013..9e883474db8c 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -583,13 +583,14 @@ static bool rcar_i2c_slave_irq(struct rcar_i2c_priv *priv)
rcar_i2c_write(priv, ICSIER, SDR | SSR | SAR);
}
- rcar_i2c_write(priv, ICSSR, ~SAR & 0xff);
+ /* Clear SSR, too, because of old STOPs to other clients than us */
+ rcar_i2c_write(priv, ICSSR, ~(SAR | SSR) & 0xff);
}
/* master sent stop */
if (ssr_filtered & SSR) {
i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSSR, ~SSR & 0xff);
}
@@ -853,7 +854,7 @@ static int rcar_reg_slave(struct i2c_client *slave)
priv->slave = slave;
rcar_i2c_write(priv, ICSAR, slave->addr);
rcar_i2c_write(priv, ICSSR, 0);
- rcar_i2c_write(priv, ICSIER, SAR | SSR);
+ rcar_i2c_write(priv, ICSIER, SAR);
rcar_i2c_write(priv, ICSCR, SIE | SDBS);
return 0;
@@ -865,12 +866,14 @@ static int rcar_unreg_slave(struct i2c_client *slave)
WARN_ON(!priv->slave);
- /* disable irqs and ensure none is running before clearing ptr */
+ /* ensure no irq is running before clearing ptr */
+ disable_irq(priv->irq);
rcar_i2c_write(priv, ICSIER, 0);
- rcar_i2c_write(priv, ICSCR, 0);
+ rcar_i2c_write(priv, ICSSR, 0);
+ enable_irq(priv->irq);
+ rcar_i2c_write(priv, ICSCR, SDBS);
rcar_i2c_write(priv, ICSAR, 0); /* Gen2: must be 0 if not using slave */
- synchronize_irq(priv->irq);
priv->slave = NULL;
pm_runtime_put(rcar_i2c_priv_to_dev(priv));
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 15324bfbc6cb..8e3cc85d1921 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
+#include <linux/iopoll.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
@@ -1040,8 +1041,21 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num)
return ret;
}
-static int rk3x_i2c_xfer(struct i2c_adapter *adap,
- struct i2c_msg *msgs, int num)
+static int rk3x_i2c_wait_xfer_poll(struct rk3x_i2c *i2c)
+{
+ ktime_t timeout = ktime_add_ms(ktime_get(), WAIT_TIMEOUT);
+
+ while (READ_ONCE(i2c->busy) &&
+ ktime_compare(ktime_get(), timeout) < 0) {
+ udelay(5);
+ rk3x_i2c_irq(0, i2c);
+ }
+
+ return !i2c->busy;
+}
+
+static int rk3x_i2c_xfer_common(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num, bool polling)
{
struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data;
unsigned long timeout, flags;
@@ -1075,8 +1089,12 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
rk3x_i2c_start(i2c);
- timeout = wait_event_timeout(i2c->wait, !i2c->busy,
- msecs_to_jiffies(WAIT_TIMEOUT));
+ if (!polling) {
+ timeout = wait_event_timeout(i2c->wait, !i2c->busy,
+ msecs_to_jiffies(WAIT_TIMEOUT));
+ } else {
+ timeout = rk3x_i2c_wait_xfer_poll(i2c);
+ }
spin_lock_irqsave(&i2c->lock, flags);
@@ -1110,6 +1128,18 @@ static int rk3x_i2c_xfer(struct i2c_adapter *adap,
return ret < 0 ? ret : num;
}
+static int rk3x_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ return rk3x_i2c_xfer_common(adap, msgs, num, false);
+}
+
+static int rk3x_i2c_xfer_polling(struct i2c_adapter *adap,
+ struct i2c_msg *msgs, int num)
+{
+ return rk3x_i2c_xfer_common(adap, msgs, num, true);
+}
+
static __maybe_unused int rk3x_i2c_resume(struct device *dev)
{
struct rk3x_i2c *i2c = dev_get_drvdata(dev);
@@ -1126,6 +1156,7 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap)
static const struct i2c_algorithm rk3x_i2c_algorithm = {
.master_xfer = rk3x_i2c_xfer,
+ .master_xfer_atomic = rk3x_i2c_xfer_polling,
.functionality = rk3x_i2c_func,
};
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 2cca1b21e26e..cab725559999 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -932,6 +932,7 @@ static void __exit sh_mobile_i2c_adap_exit(void)
module_exit(sh_mobile_i2c_adap_exit);
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
-MODULE_AUTHOR("Magnus Damm and Wolfram Sang");
+MODULE_AUTHOR("Magnus Damm");
+MODULE_AUTHOR("Wolfram Sang");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:i2c-sh_mobile");
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 9dcea2ba7168..8f71f01cb169 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -180,6 +180,7 @@ static void __exit i2c_sibyte_exit(void)
module_init(i2c_sibyte_init);
module_exit(i2c_sibyte_exit);
-MODULE_AUTHOR("Kip Walker (Broadcom Corp.), Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Kip Walker (Broadcom Corp.)");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index d7f72ec331e8..30db8fafe078 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -470,6 +470,6 @@ static struct platform_driver i2c_sirfsoc_driver = {
module_platform_driver(i2c_sirfsoc_driver);
MODULE_DESCRIPTION("SiRF SoC I2C master controller driver");
-MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, "
- "Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
+MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>");
+MODULE_AUTHOR("Xiangzhen Ye <Xiangzhen.Ye@csr.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-synquacer.c b/drivers/i2c/busses/i2c-synquacer.c
index c9a3dba6a75d..31be1811d5e6 100644
--- a/drivers/i2c/busses/i2c-synquacer.c
+++ b/drivers/i2c/busses/i2c-synquacer.c
@@ -398,8 +398,7 @@ static irqreturn_t synquacer_i2c_isr(int irq, void *dev_id)
if (i2c->state == STATE_READ)
goto prepare_read;
-
- /* fall through */
+ fallthrough;
case STATE_WRITE:
if (bsr & SYNQUACER_I2C_BSR_LRB) {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 15772964a05f..00d3e4d7a01e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -293,6 +293,8 @@ struct tegra_i2c_dev {
bool is_curr_atomic_xfer;
};
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit);
+
static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
unsigned long reg)
{
@@ -419,7 +421,7 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
dma_addr_t dma_phys;
int err;
- if (!i2c_dev->hw->has_apb_dma)
+ if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
return 0;
if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
@@ -655,32 +657,47 @@ static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
if (ret)
return ret;
- if (!i2c_dev->hw->has_single_clk_source) {
- ret = clk_enable(i2c_dev->fast_clk);
- if (ret < 0) {
- dev_err(i2c_dev->dev,
- "Enabling fast clk failed, err %d\n", ret);
- return ret;
- }
+ ret = clk_enable(i2c_dev->fast_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev,
+ "Enabling fast clk failed, err %d\n", ret);
+ return ret;
}
- if (i2c_dev->slow_clk) {
- ret = clk_enable(i2c_dev->slow_clk);
- if (ret < 0) {
- dev_err(dev, "failed to enable slow clock: %d\n", ret);
- return ret;
- }
+ ret = clk_enable(i2c_dev->slow_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable slow clock: %d\n", ret);
+ goto disable_fast_clk;
}
ret = clk_enable(i2c_dev->div_clk);
if (ret < 0) {
dev_err(i2c_dev->dev,
"Enabling div clk failed, err %d\n", ret);
- clk_disable(i2c_dev->fast_clk);
- return ret;
+ goto disable_slow_clk;
+ }
+
+ /*
+ * VI I2C device is attached to VE power domain which goes through
+ * power ON/OFF during PM runtime resume/suspend. So, controller
+ * should go through reset and need to re-initialize after power
+ * domain ON.
+ */
+ if (i2c_dev->is_vi) {
+ ret = tegra_i2c_init(i2c_dev, true);
+ if (ret)
+ goto disable_div_clk;
}
return 0;
+
+disable_div_clk:
+ clk_disable(i2c_dev->div_clk);
+disable_slow_clk:
+ clk_disable(i2c_dev->slow_clk);
+disable_fast_clk:
+ clk_disable(i2c_dev->fast_clk);
+ return ret;
}
static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
@@ -688,12 +705,8 @@ static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
clk_disable(i2c_dev->div_clk);
-
- if (i2c_dev->slow_clk)
- clk_disable(i2c_dev->slow_clk);
-
- if (!i2c_dev->hw->has_single_clk_source)
- clk_disable(i2c_dev->fast_clk);
+ clk_disable(i2c_dev->slow_clk);
+ clk_disable(i2c_dev->fast_clk);
return pinctrl_pm_select_idle_state(i2c_dev->dev);
}
@@ -1716,20 +1729,16 @@ static int tegra_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c_dev);
- if (!i2c_dev->hw->has_single_clk_source) {
- ret = clk_prepare(i2c_dev->fast_clk);
- if (ret < 0) {
- dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
- return ret;
- }
+ ret = clk_prepare(i2c_dev->fast_clk);
+ if (ret < 0) {
+ dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
+ return ret;
}
- if (i2c_dev->slow_clk) {
- ret = clk_prepare(i2c_dev->slow_clk);
- if (ret < 0) {
- dev_err(dev, "failed to prepare slow clock: %d\n", ret);
- goto unprepare_fast_clk;
- }
+ ret = clk_prepare(i2c_dev->slow_clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to prepare slow clock: %d\n", ret);
+ goto unprepare_fast_clk;
}
if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
@@ -1750,7 +1759,15 @@ static int tegra_i2c_probe(struct platform_device *pdev)
goto unprepare_slow_clk;
}
- pm_runtime_irq_safe(&pdev->dev);
+ /*
+ * VI I2C is in VE power domain which is not always on and not
+ * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ
+ * safe domain as it prevents powering off the PM domain.
+ * Also, VI I2C device don't need to use runtime IRQ safe as it will
+ * not be used for atomic transfers.
+ */
+ if (!i2c_dev->is_vi)
+ pm_runtime_irq_safe(&pdev->dev);
pm_runtime_enable(&pdev->dev);
if (!pm_runtime_enabled(&pdev->dev)) {
ret = tegra_i2c_runtime_resume(&pdev->dev);
@@ -1835,12 +1852,10 @@ unprepare_div_clk:
clk_unprepare(i2c_dev->div_clk);
unprepare_slow_clk:
- if (i2c_dev->is_vi)
- clk_unprepare(i2c_dev->slow_clk);
+ clk_unprepare(i2c_dev->slow_clk);
unprepare_fast_clk:
- if (!i2c_dev->hw->has_single_clk_source)
- clk_unprepare(i2c_dev->fast_clk);
+ clk_unprepare(i2c_dev->fast_clk);
return ret;
}
@@ -1859,12 +1874,8 @@ static int tegra_i2c_remove(struct platform_device *pdev)
tegra_i2c_runtime_suspend(&pdev->dev);
clk_unprepare(i2c_dev->div_clk);
-
- if (i2c_dev->slow_clk)
- clk_unprepare(i2c_dev->slow_clk);
-
- if (!i2c_dev->hw->has_single_clk_source)
- clk_unprepare(i2c_dev->fast_clk);
+ clk_unprepare(i2c_dev->slow_clk);
+ clk_unprepare(i2c_dev->fast_clk);
tegra_i2c_release_dma(i2c_dev);
return 0;
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 4abc7771af06..970ccdcbb889 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -228,7 +228,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
goto exit_unsupported;
if (read_write == I2C_SMBUS_READ)
outb_p(data->block[0], SMBHSTDAT0);
- /* Fall through */
+ fallthrough;
case I2C_SMBUS_BLOCK_DATA:
outb_p(command, SMBHSTCMD);
if (read_write == I2C_SMBUS_WRITE) {
@@ -489,9 +489,9 @@ static void __exit i2c_vt596_exit(void)
}
}
-MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>, "
- "Mark D. Studebaker <mdsxyz123@yahoo.com> and "
- "Jean Delvare <jdelvare@suse.de>");
+MODULE_AUTHOR("Kyosti Malkki <kmalkki@cc.hut.fi>");
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
MODULE_DESCRIPTION("vt82c596 SMBus driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index bd9afa383d12..7b42a18bd05c 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -151,7 +151,7 @@ static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status)
case state_repeat_start:
outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1);
- /* fallthrough */
+ fallthrough;
case state_quick:
if (iface->address_byte & 1) {
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index 26f03a14a478..34a9609f256d 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -32,6 +32,7 @@
#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/pm_wakeirq.h>
@@ -181,6 +182,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
if (bri->prepare_recovery)
bri->prepare_recovery(adap);
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
/*
* If we can set SDA, we will always create a STOP to ensure additional
@@ -236,6 +239,8 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap)
if (bri->unprepare_recovery)
bri->unprepare_recovery(adap);
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_default);
return ret;
}
@@ -251,13 +256,135 @@ int i2c_recover_bus(struct i2c_adapter *adap)
}
EXPORT_SYMBOL_GPL(i2c_recover_bus);
-static void i2c_init_recovery(struct i2c_adapter *adap)
+static void i2c_gpio_init_pinctrl_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ struct pinctrl *p = bri->pinctrl;
+
+ /*
+ * we can't change states without pinctrl, so remove the states if
+ * populated
+ */
+ if (!p) {
+ bri->pins_default = NULL;
+ bri->pins_gpio = NULL;
+ return;
+ }
+
+ if (!bri->pins_default) {
+ bri->pins_default = pinctrl_lookup_state(p,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(bri->pins_default)) {
+ dev_dbg(dev, PINCTRL_STATE_DEFAULT " state not found for GPIO recovery\n");
+ bri->pins_default = NULL;
+ }
+ }
+ if (!bri->pins_gpio) {
+ bri->pins_gpio = pinctrl_lookup_state(p, "gpio");
+ if (IS_ERR(bri->pins_gpio))
+ bri->pins_gpio = pinctrl_lookup_state(p, "recovery");
+
+ if (IS_ERR(bri->pins_gpio)) {
+ dev_dbg(dev, "no gpio or recovery state found for GPIO recovery\n");
+ bri->pins_gpio = NULL;
+ }
+ }
+
+ /* for pinctrl state changes, we need all the information */
+ if (bri->pins_default && bri->pins_gpio) {
+ dev_info(dev, "using pinctrl states for GPIO recovery");
+ } else {
+ bri->pinctrl = NULL;
+ bri->pins_default = NULL;
+ bri->pins_gpio = NULL;
+ }
+}
+
+static int i2c_gpio_init_generic_recovery(struct i2c_adapter *adap)
+{
+ struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
+ struct device *dev = &adap->dev;
+ struct gpio_desc *gpiod;
+ int ret = 0;
+
+ /*
+ * don't touch the recovery information if the driver is not using
+ * generic SCL recovery
+ */
+ if (bri->recover_bus && bri->recover_bus != i2c_generic_scl_recovery)
+ return 0;
+
+ /*
+ * pins might be taken as GPIO, so we should inform pinctrl about
+ * this and move the state to GPIO
+ */
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_gpio);
+
+ /*
+ * if there is incomplete or no recovery information, see if generic
+ * GPIO recovery is available
+ */
+ if (!bri->scl_gpiod) {
+ gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto cleanup_pinctrl_state;
+ }
+ if (!IS_ERR(gpiod)) {
+ bri->scl_gpiod = gpiod;
+ bri->recover_bus = i2c_generic_scl_recovery;
+ dev_info(dev, "using generic GPIOs for recovery\n");
+ }
+ }
+
+ /* SDA GPIOD line is optional, so we care about DEFER only */
+ if (!bri->sda_gpiod) {
+ /*
+ * We have SCL. Pull SCL low and wait a bit so that SDA glitches
+ * have no effect.
+ */
+ gpiod_direction_output(bri->scl_gpiod, 0);
+ udelay(10);
+ gpiod = devm_gpiod_get(dev, "sda", GPIOD_IN);
+
+ /* Wait a bit in case of a SDA glitch, and then release SCL. */
+ udelay(10);
+ gpiod_direction_output(bri->scl_gpiod, 1);
+
+ if (PTR_ERR(gpiod) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto cleanup_pinctrl_state;
+ }
+ if (!IS_ERR(gpiod))
+ bri->sda_gpiod = gpiod;
+ }
+
+cleanup_pinctrl_state:
+ /* change the state of the pins back to their default state */
+ if (bri->pinctrl)
+ pinctrl_select_state(bri->pinctrl, bri->pins_default);
+
+ return ret;
+}
+
+static int i2c_gpio_init_recovery(struct i2c_adapter *adap)
+{
+ i2c_gpio_init_pinctrl_recovery(adap);
+ return i2c_gpio_init_generic_recovery(adap);
+}
+
+static int i2c_init_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
char *err_str;
if (!bri)
- return;
+ return 0;
+
+ if (i2c_gpio_init_recovery(adap) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
if (!bri->recover_bus) {
err_str = "no recover_bus() found";
@@ -273,10 +400,7 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
if (gpiod_get_direction(bri->sda_gpiod) == 0)
bri->set_sda = set_sda_gpio_value;
}
- return;
- }
-
- if (bri->recover_bus == i2c_generic_scl_recovery) {
+ } else if (bri->recover_bus == i2c_generic_scl_recovery) {
/* Generic SCL recovery */
if (!bri->set_scl || !bri->get_scl) {
err_str = "no {get|set}_scl() found";
@@ -288,10 +412,12 @@ static void i2c_init_recovery(struct i2c_adapter *adap)
}
}
- return;
+ return 0;
err:
dev_err(&adap->dev, "Not using recovery: %s\n", err_str);
adap->bus_recovery_info = NULL;
+
+ return -EINVAL;
}
static int i2c_smbus_host_notify_to_irq(const struct i2c_client *client)
@@ -319,11 +445,9 @@ static int i2c_device_probe(struct device *dev)
if (!client)
return 0;
- driver = to_i2c_driver(dev->driver);
-
client->irq = client->init_irq;
- if (!client->irq && !driver->disable_i2c_core_irq_mapping) {
+ if (!client->irq) {
int irq = -ENOENT;
if (client->flags & I2C_CLIENT_HOST_NOTIFY) {
@@ -349,6 +473,8 @@ static int i2c_device_probe(struct device *dev)
client->irq = irq;
}
+ driver = to_i2c_driver(dev->driver);
+
/*
* An I2C ID table is not mandatory, if and only if, a suitable OF
* or ACPI ID table is supplied for the probing device.
@@ -1227,7 +1353,7 @@ static int i2c_setup_host_notify_irq_domain(struct i2c_adapter *adap)
if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_HOST_NOTIFY))
return 0;
- domain = irq_domain_create_linear(adap->dev.fwnode,
+ domain = irq_domain_create_linear(adap->dev.parent->fwnode,
I2C_ADDR_7BITS_COUNT,
&i2c_host_notify_irq_ops, adap);
if (!domain)
@@ -1318,12 +1444,16 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
if (res)
goto out_reg;
- dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
-
pm_runtime_no_callbacks(&adap->dev);
pm_suspend_ignore_children(&adap->dev, true);
pm_runtime_enable(&adap->dev);
+ res = i2c_init_recovery(adap);
+ if (res == -EPROBE_DEFER)
+ goto out_reg;
+
+ dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name);
+
#ifdef CONFIG_I2C_COMPAT
res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev,
adap->dev.parent);
@@ -1332,8 +1462,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
"Failed to create compatibility class link\n");
#endif
- i2c_init_recovery(adap);
-
/* create pre-declared device nodes */
of_i2c_register_devices(adap);
i2c_acpi_register_devices(adap);
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index da020acc9bbd..6ceb11cc4be1 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -761,8 +761,8 @@ static void __exit i2c_dev_exit(void)
unregister_chrdev_region(MKDEV(I2C_MAJOR, 0), I2C_MINORS);
}
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
- "Simon G. Vogl <simon@tk.uni-linz.ac.at>");
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
+MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C /dev entries driver");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-slave-eeprom.c b/drivers/i2c/i2c-slave-eeprom.c
index 593f2fd39d17..5c7ae421cacf 100644
--- a/drivers/i2c/i2c-slave-eeprom.c
+++ b/drivers/i2c/i2c-slave-eeprom.c
@@ -66,7 +66,7 @@ static int i2c_slave_eeprom_slave_cb(struct i2c_client *client,
case I2C_SLAVE_READ_PROCESSED:
/* The previous byte made it to the bus, get next one */
eeprom->buffer_idx++;
- /* fallthrough */
+ fallthrough;
case I2C_SLAVE_READ_REQUESTED:
spin_lock(&eeprom->buffer_lock);
*val = eeprom->buffer[eeprom->buffer_idx & eeprom->address_mask];