diff options
| author | Tomasz Figa <t.figa@samsung.com> | 2012-11-13 11:33:40 +0100 |
|---|---|---|
| committer | Wolfram Sang <w.sang@pengutronix.de> | 2012-11-16 12:53:25 +0100 |
| commit | 2693ac69880a33d4d9df6f128415b65e745f00ba (patch) | |
| tree | d947754cefb3bb6dd68833e53b5643bedb279cf7 /drivers/i2c | |
| parent | a72ad456bb93a0114b4d6702421b35a9c548bd46 (diff) | |
| download | linux-2693ac69880a33d4d9df6f128415b65e745f00ba.tar.bz2 | |
i2c: s3c2410: Add support for pinctrl
This patch adds support for pin configuration using pinctrl subsystem
to the i2c-s3c2410 driver.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index f82d11f9b8f2..40e2d40bbdb5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -38,6 +38,7 @@ #include <linux/io.h> #include <linux/of_i2c.h> #include <linux/of_gpio.h> +#include <linux/pinctrl/consumer.h> #include <asm/irq.h> @@ -82,6 +83,7 @@ struct s3c24xx_i2c { struct s3c2410_platform_i2c *pdata; int gpios[2]; + struct pinctrl *pctrl; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; #endif @@ -860,9 +862,8 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) if (pdata->cfg_gpio) pdata->cfg_gpio(to_platform_device(i2c->dev)); - else - if (s3c24xx_i2c_parse_dt_gpio(i2c)) - return -EINVAL; + else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c)) + return -EINVAL; /* write slave address */ @@ -1003,6 +1004,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) i2c->adap.algo_data = i2c; i2c->adap.dev.parent = &pdev->dev; + i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev); + /* initialise the i2c controller */ ret = s3c24xx_i2c_init(i2c); @@ -1092,7 +1095,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) clk_disable_unprepare(i2c->clk); clk_put(i2c->clk); - s3c24xx_i2c_dt_gpio_free(i2c); + if (pdev->dev.of_node && IS_ERR(i2c->pctrl)) + s3c24xx_i2c_dt_gpio_free(i2c); return 0; } |