summaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
authorAbhishek Sahu <absahu@codeaurora.org>2018-03-12 18:44:54 +0530
committerWolfram Sang <wsa@the-dreams.de>2018-03-24 13:19:38 +0100
commitc5adc0fa63a930e3313c74bb7c1d4d158130eb41 (patch)
tree2a10dda89d6e7688e1387dd6d2ad70e2ce968525 /drivers/i2c
parent6d5f37f166bb07b04b4d42e9d1f5427b7931cd3c (diff)
downloadlinux-c5adc0fa63a930e3313c74bb7c1d4d158130eb41.tar.bz2
i2c: qup: schedule EOT and FLUSH tags at the end of transfer
The role of FLUSH and EOT tag is to flush already scheduled descriptors in BAM HW in case of error. EOT is required only when descriptors are scheduled in RX FIFO. If all the messages are WRITE, then only FLUSH tag will be used. A single BAM transfer can have multiple read and write messages. The EOT and FLUSH tags should be scheduled at the end of BAM HW descriptors. Since the READ and WRITE can be present in any order so for some of the cases, these tags are not being written correctly. Following is one of the example READ, READ, READ, READ Currently EOT and FLUSH tags are being written after each READ. If QUP gets NACK for first READ itself, then flush will be triggered. It will look for first FLUSH tag in TX FIFO and will stop there so only descriptors for first READ descriptors be flushed. All the scheduled descriptors should be cleared to generate BAM DMA completion. Now this patch is scheduling FLUSH and EOT only once after all the descriptors. So, flush will clear all the scheduled descriptors and BAM will generate the completion interrupt. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-qup.c39
1 files changed, 24 insertions, 15 deletions
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
index d97045898447..b2e8f574cd15 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -551,7 +551,7 @@ static int qup_i2c_set_tags_smb(u16 addr, u8 *tags, struct qup_i2c_dev *qup,
}
static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
- struct i2c_msg *msg, int is_dma)
+ struct i2c_msg *msg)
{
u16 addr = i2c_8bit_addr_from_msg(msg);
int len = 0;
@@ -592,11 +592,6 @@ static int qup_i2c_set_tags(u8 *tags, struct qup_i2c_dev *qup,
else
tags[len++] = data_len;
- if ((msg->flags & I2C_M_RD) && last && is_dma) {
- tags[len++] = QUP_BAM_INPUT_EOT;
- tags[len++] = QUP_BAM_FLUSH_STOP;
- }
-
return len;
}
@@ -605,7 +600,7 @@ static int qup_i2c_issue_xfer_v2(struct qup_i2c_dev *qup, struct i2c_msg *msg)
int data_len = 0, tag_len, index;
int ret;
- tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg, 0);
+ tag_len = qup_i2c_set_tags(qup->blk.tags, qup, msg);
index = msg->len - qup->blk.data_len;
/* only tags are written for read */
@@ -701,7 +696,7 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
while (qup->blk.pos < blocks) {
tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + len];
- len += qup_i2c_set_tags(tags, qup, msg, 1);
+ len += qup_i2c_set_tags(tags, qup, msg);
qup->blk.data_len -= tlen;
/* scratch buf to read the start and len tags */
@@ -729,17 +724,11 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
return ret;
off += len;
- /* scratch buf to read the BAM EOT and FLUSH tags */
- ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
- &qup->brx.tag.start[0],
- 2, qup, DMA_FROM_DEVICE);
- if (ret)
- return ret;
} else {
while (qup->blk.pos < blocks) {
tlen = (i == (blocks - 1)) ? rem : limit;
tags = &qup->start_tag.start[off + tx_len];
- len = qup_i2c_set_tags(tags, qup, msg, 1);
+ len = qup_i2c_set_tags(tags, qup, msg);
qup->blk.data_len -= tlen;
ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++],
@@ -779,6 +768,26 @@ static int qup_i2c_bam_do_xfer(struct qup_i2c_dev *qup, struct i2c_msg *msg,
msg++;
}
+ /* schedule the EOT and FLUSH I2C tags */
+ len = 1;
+ if (rx_cnt) {
+ qup->btx.tag.start[0] = QUP_BAM_INPUT_EOT;
+ len++;
+
+ /* scratch buf to read the BAM EOT and FLUSH tags */
+ ret = qup_sg_set_buf(&qup->brx.sg[rx_cnt++],
+ &qup->brx.tag.start[0],
+ 2, qup, DMA_FROM_DEVICE);
+ if (ret)
+ return ret;
+ }
+
+ qup->btx.tag.start[len - 1] = QUP_BAM_FLUSH_STOP;
+ ret = qup_sg_set_buf(&qup->btx.sg[tx_cnt++], &qup->btx.tag.start[0],
+ len, qup, DMA_TO_DEVICE);
+ if (ret)
+ return ret;
+
txd = dmaengine_prep_slave_sg(qup->btx.dma, qup->btx.sg, tx_cnt,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT | DMA_PREP_FENCE);