Merge branch 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - if a host can be a client, too, the I2C core can now use it to
   emulate SMBus HostNotify support (STM32 and R-Car added this so far)

 - also for client mode, a testunit has been added. It can create rare
   situations on the bus, so host controllers can be tested

 - a binding has been added to mark the bus as "single-master". This
   allows for better timeout detections

 - new driver for Mellanox Bluefield

 - massive refactoring of the Tegra driver

 - EEPROMs recognized by the at24 driver can now have custom names

 - rest is driver updates

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
  Documentation: i2c: add testunit docs to index
  i2c: tegra: Improve driver module description
  i2c: tegra: Clean up whitespaces, newlines and indentation
  i2c: tegra: Clean up and improve comments
  i2c: tegra: Clean up printk messages
  i2c: tegra: Clean up variable names
  i2c: tegra: Improve formatting of variables
  i2c: tegra: Check errors for both positive and negative values
  i2c: tegra: Factor out hardware initialization into separate function
  i2c: tegra: Factor out register polling into separate function
  i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  i2c: tegra: Rename wait/poll functions
  i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  i2c: tegra: Remove likely/unlikely from the code
  i2c: tegra: Remove outdated barrier()
  i2c: tegra: Clean up variable types
  i2c: tegra: Reorder location of functions in the code
  i2c: tegra: Clean up probe function
  ...

21 files changed, 3466 insertions, 882 deletions

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 293e7a0760e7..a4f473ef4e5c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -147,6 +147,7 @@ config I2C_I801
 	    Tiger Lake (PCH)
 	    Jasper Lake (SOC)
 	    Emmitsburg (PCH)
+	    Alder Lake (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -730,6 +731,19 @@ config I2C_LPC2K
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-lpc2k.
 
+config I2C_MLXBF
+        tristate "Mellanox BlueField I2C controller"
+        depends on ARM64
+        help
+          Enabling this option will add I2C SMBus support for Mellanox BlueField
+          system.
+
+          This driver can also be built as a module. If so, the module will be
+          called i2c-mlxbf.
+
+          This driver implements an I2C SMBus host controller and enables both
+          master and slave functions.
+
 config I2C_MESON
 	tristate "Amlogic Meson I2C controller"
 	depends on ARCH_MESON || COMPILE_TEST
@@ -840,7 +854,6 @@ config I2C_PASEMI
 config I2C_PCA_PLATFORM
 	tristate "PCA9564/PCA9665 as platform device"
 	select I2C_ALGOPCA
-	default n
 	help
 	  This driver supports a memory mapped Philips PCA9564/PCA9665
 	  parallel bus to I2C bus controller.
@@ -1026,6 +1039,7 @@ config I2C_STM32F7
 	tristate "STMicroelectronics STM32F7 I2C support"
 	depends on ARCH_STM32 || COMPILE_TEST
 	select I2C_SLAVE
+	select I2C_SMBUS
 	help
 	  Enable this option to add support for STM32 I2C controller embedded
 	  in STM32F7 SoCs.
@@ -1181,6 +1195,8 @@ config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
 	depends on ARCH_RENESAS || COMPILE_TEST
 	select I2C_SLAVE
+	select I2C_SMBUS
+	select RESET_CONTROLLER if ARCH_RCAR_GEN3
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
@@ -1240,7 +1256,6 @@ config I2C_TAOS_EVM
 	depends on TTY
 	select SERIO
 	select SERIO_SERPORT
-	default n
 	help
 	  This supports TAOS evaluation modules on serial port. In order to
 	  use this driver, you will need the inputattach tool, which is part
@@ -1324,7 +1339,6 @@ config I2C_PCA_ISA
 	tristate "PCA9564/PCA9665 on an ISA bus"
 	depends on ISA
 	select I2C_ALGOPCA
-	default n
 	help
 	  This driver supports ISA boards using the Philips PCA9564/PCA9665
 	  parallel bus to I2C bus controller.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 19aff0e45cb5..683c49faca05 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -140,6 +140,7 @@ obj-$(CONFIG_I2C_BRCMSTB)	+= i2c-brcmstb.o
 obj-$(CONFIG_I2C_CROS_EC_TUNNEL)	+= i2c-cros-ec-tunnel.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_ICY)		+= i2c-icy.o
+obj-$(CONFIG_I2C_MLXBF)		+= i2c-mlxbf.o
 obj-$(CONFIG_I2C_MLXCPLD)	+= i2c-mlxcpld.o
 obj-$(CONFIG_I2C_OPAL)		+= i2c-opal.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c
index 17df9e8845b6..506433bc0ff2 100644
--- a/drivers/i2c/busses/i2c-amd-mp2-plat.c
+++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c
@@ -155,7 +155,7 @@ static int i2c_amd_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	struct amd_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	int i;
 	struct i2c_msg *pmsg;
-	int err;
+	int err = 0;
 
 	/* the adapter might have been deleted while waiting for the bus lock */
 	if (unlikely(!i2c_dev->common.mp2_dev))
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index 5dc519516292..37443edbf754 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -421,11 +421,9 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c_dev->regs);
 
 	mclk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(mclk)) {
-		if (PTR_ERR(mclk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Could not get clock\n");
-		return PTR_ERR(mclk);
-	}
+	if (IS_ERR(mclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mclk),
+				     "Could not get clock\n");
 
 	i2c_dev->bus_clk = bcm2835_i2c_register_div(&pdev->dev, mclk, i2c_dev);
 
diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index 838ce0947191..f6e13ceeb2b3 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -332,21 +332,15 @@ static int efm32_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to determine base address\n");
-		return -ENODEV;
-	}
+	ddata->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
 
 	if (resource_size(res) < 0x42) {
 		dev_err(&pdev->dev, "memory resource too small\n");
 		return -EINVAL;
 	}
 
-	ddata->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(ddata->base))
-		return PTR_ERR(ddata->base);
-
 	ret = platform_get_irq(pdev, 0);
 	if (ret <= 0) {
 		if (!ret)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index bffca729e1c7..ae90713443fa 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -71,6 +71,7 @@
  * Tiger Lake-H (PCH)		0x43a3	32	hard	yes	yes	yes
  * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
  * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
+ * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -228,6 +229,7 @@
 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
@@ -1081,6 +1083,7 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
 	{ 0, }
 };
 
@@ -1274,6 +1277,7 @@ static const struct {
 	/*
 	 * Additional individual entries were added after verification.
 	 */
+	{ "Latitude 5480",      0x29 },
 	{ "Vostro V131",        0x1d },
 };
 
@@ -1767,6 +1771,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
+	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
 		priv->features |= FEATURE_BLOCK_PROC;
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 0ab5381aa012..c98529c76348 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1159,11 +1159,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
 
 	/* Get I2C clock */
 	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(i2c_imx->clk)) {
-		if (PTR_ERR(i2c_imx->clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "can't get I2C clock\n");
-		return PTR_ERR(i2c_imx->clk);
-	}
+	if (IS_ERR(i2c_imx->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_imx->clk),
+				     "can't get I2C clock\n");
 
 	ret = clk_prepare_enable(i2c_imx->clk);
 	if (ret) {
@@ -1171,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* Request IRQ */
-	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
-				pdev->name, i2c_imx);
-	if (ret) {
-		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
-		goto clk_disable;
-	}
-
 	/* Init queue */
 	init_waitqueue_head(&i2c_imx->queue);
 
@@ -1197,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto rpm_disable;
 
+	/* Request IRQ */
+	ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
+				   pdev->name, i2c_imx);
+	if (ret) {
+		dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+		goto rpm_disable;
+	}
+
 	/* Set up clock divider */
 	i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
 	ret = of_property_read_u32(pdev->dev.of_node,
@@ -1239,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev)
 
 clk_notifier_unregister:
 	clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+	free_irq(irq, i2c_imx);
 rpm_disable:
 	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
-
-clk_disable:
 	clk_disable_unprepare(i2c_imx->clk);
 	return ret;
 }
@@ -1253,7 +1250,7 @@ clk_disable:
 static int i2c_imx_remove(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
-	int ret;
+	int irq, ret;
 
 	ret = pm_runtime_get_sync(&pdev->dev);
 	if (ret < 0)
@@ -1273,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
 	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
 
 	clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+	irq = platform_get_irq(pdev, 0);
+	if (irq >= 0)
+		free_irq(irq, i2c_imx);
 	clk_disable_unprepare(i2c_imx->clk);
 
 	pm_runtime_put_noidle(&pdev->dev);
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 2f95e25a10f7..a35a27c320e7 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -77,6 +77,7 @@
 #define PCI_DEVICE_ID_INTEL_S1200_SMT1	0x0c5a
 #define PCI_DEVICE_ID_INTEL_CDF_SMT	0x18ac
 #define PCI_DEVICE_ID_INTEL_DNV_SMT	0x19ac
+#define PCI_DEVICE_ID_INTEL_EBG_SMT	0x1bff
 #define PCI_DEVICE_ID_INTEL_AVOTON_SMT	0x1f15
 
 #define ISMT_DESC_ENTRIES	2	/* number of descriptor entries */
@@ -176,14 +177,12 @@ struct ismt_priv {
 	u8 buffer[I2C_SMBUS_BLOCK_MAX + 16];	/* temp R/W data buffer */
 };
 
-/**
- * ismt_ids - PCI device IDs supported by this driver
- */
 static const struct pci_device_id ismt_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMT) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
 	{ 0, }
 };
@@ -197,6 +196,8 @@ MODULE_PARM_DESC(bus_speed, "Bus Speed in kHz (0 = BIOS default)");
 
 /**
  * __ismt_desc_dump() - dump the contents of a specific descriptor
+ * @dev: the iSMT device
+ * @desc: the iSMT hardware descriptor
  */
 static void __ismt_desc_dump(struct device *dev, const struct ismt_desc *desc)
 {
@@ -628,11 +629,6 @@ static u32 ismt_func(struct i2c_adapter *adap)
 	       I2C_FUNC_SMBUS_PEC;
 }
 
-/**
- * smbus_algorithm - the adapter algorithm and supported functionality
- * @smbus_xfer: the adapter algorithm
- * @functionality: functionality supported by the adapter
- */
 static const struct i2c_algorithm smbus_algorithm = {
 	.smbus_xfer	= ismt_access,
 	.functionality	= ismt_func,
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index ba831df6661e..cb4a25ebb890 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -752,6 +752,7 @@ static const struct ingenic_i2c_config x1000_i2c_config = {
 };
 
 static const struct of_device_id jz4780_i2c_of_matches[] = {
+	{ .compatible = "ingenic,jz4770-i2c", .data = &jz4780_i2c_config },
 	{ .compatible = "ingenic,jz4780-i2c", .data = &jz4780_i2c_config },
 	{ .compatible = "ingenic,x1000-i2c", .data = &x1000_i2c_config },
 	{ /* sentinel */ }
@@ -856,7 +857,7 @@ static struct platform_driver jz4780_i2c_driver = {
 	.remove		= jz4780_i2c_remove,
 	.driver		= {
 		.name	= "jz4780-i2c",
-		.of_match_table = of_match_ptr(jz4780_i2c_of_matches),
+		.of_match_table = jz4780_i2c_of_matches,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
new file mode 100644
index 000000000000..ee59e0da082d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -0,0 +1,2506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Mellanox BlueField I2C bus driver
+ *
+ *  Copyright (C) 2020 Mellanox Technologies, Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+/* Defines what functionality is present. */
+#define MLXBF_I2C_FUNC_SMBUS_BLOCK \
+	(I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_SMBUS_DEFAULT \
+	(I2C_FUNC_SMBUS_BYTE      | I2C_FUNC_SMBUS_BYTE_DATA | \
+	 I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK | \
+	 I2C_FUNC_SMBUS_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_ALL \
+	(MLXBF_I2C_FUNC_SMBUS_DEFAULT | MLXBF_I2C_FUNC_SMBUS_BLOCK | \
+	 I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SLAVE)
+
+#define MLXBF_I2C_SMBUS_MAX        3
+
+/* Shared resources info in BlueField platforms. */
+
+#define MLXBF_I2C_COALESCE_TYU_ADDR    0x02801300
+#define MLXBF_I2C_COALESCE_TYU_SIZE    0x010
+
+#define MLXBF_I2C_GPIO_TYU_ADDR        0x02802000
+#define MLXBF_I2C_GPIO_TYU_SIZE        0x100
+
+#define MLXBF_I2C_COREPLL_TYU_ADDR     0x02800358
+#define MLXBF_I2C_COREPLL_TYU_SIZE     0x008
+
+#define MLXBF_I2C_COREPLL_YU_ADDR      0x02800c30
+#define MLXBF_I2C_COREPLL_YU_SIZE      0x00c
+
+#define MLXBF_I2C_SHARED_RES_MAX       3
+
+/*
+ * Note that the following SMBus, CAUSE, GPIO and PLL register addresses
+ * refer to their respective offsets relative to the corresponding
+ * memory-mapped region whose addresses are specified in either the DT or
+ * the ACPI tables or above.
+ */
+
+/*
+ * SMBus Master core clock frequency. Timing configurations are
+ * strongly dependent on the core clock frequency of the SMBus
+ * Master. Default value is set to 400MHz.
+ */
+#define MLXBF_I2C_TYU_PLL_OUT_FREQ  (400 * 1000 * 1000)
+/* Reference clock for Bluefield 1 - 156 MHz. */
+#define MLXBF_I2C_TYU_PLL_IN_FREQ   (156 * 1000 * 1000)
+/* Reference clock for BlueField 2 - 200 MHz. */
+#define MLXBF_I2C_YU_PLL_IN_FREQ    (200 * 1000 * 1000)
+
+/* Constant used to determine the PLL frequency. */
+#define MLNXBF_I2C_COREPLL_CONST    16384
+
+/* PLL registers. */
+#define MLXBF_I2C_CORE_PLL_REG0         0x0
+#define MLXBF_I2C_CORE_PLL_REG1         0x4
+#define MLXBF_I2C_CORE_PLL_REG2         0x8
+
+/* OR cause register. */
+#define MLXBF_I2C_CAUSE_OR_EVTEN0    0x14
+#define MLXBF_I2C_CAUSE_OR_CLEAR     0x18
+
+/* Arbiter Cause Register. */
+#define MLXBF_I2C_CAUSE_ARBITER      0x1c
+
+/*
+ * Cause Status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Transaction ended with STOP. */
+#define MLXBF_I2C_CAUSE_TRANSACTION_ENDED  BIT(0)
+/* Master arbitration lost. */
+#define MLXBF_I2C_CAUSE_M_ARBITRATION_LOST BIT(1)
+/* Unexpected start detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_START   BIT(2)
+/* Unexpected stop detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_STOP    BIT(3)
+/* Wait for transfer continuation. */
+#define MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA   BIT(4)
+/* Failed to generate STOP. */
+#define MLXBF_I2C_CAUSE_PUT_STOP_FAILED    BIT(5)
+/* Failed to generate START. */
+#define MLXBF_I2C_CAUSE_PUT_START_FAILED   BIT(6)
+/* Clock toggle completed. */
+#define MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE    BIT(7)
+/* Transfer timeout occurred. */
+#define MLXBF_I2C_CAUSE_M_FW_TIMEOUT       BIT(8)
+/* Master busy bit reset. */
+#define MLXBF_I2C_CAUSE_M_GW_BUSY_FALL     BIT(9)
+
+#define MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK     GENMASK(9, 0)
+
+#define MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR \
+	(MLXBF_I2C_CAUSE_M_ARBITRATION_LOST | \
+	 MLXBF_I2C_CAUSE_UNEXPECTED_START | \
+	 MLXBF_I2C_CAUSE_UNEXPECTED_STOP | \
+	 MLXBF_I2C_CAUSE_PUT_STOP_FAILED | \
+	 MLXBF_I2C_CAUSE_PUT_START_FAILED | \
+	 MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE | \
+	 MLXBF_I2C_CAUSE_M_FW_TIMEOUT)
+
+/*
+ * Slave cause status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Write transaction received successfully. */
+#define MLXBF_I2C_CAUSE_WRITE_SUCCESS         BIT(0)
+/* Read transaction received, waiting for response. */
+#define MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE BIT(13)
+/* Slave busy bit reset. */
+#define MLXBF_I2C_CAUSE_S_GW_BUSY_FALL        BIT(18)
+
+#define MLXBF_I2C_CAUSE_SLAVE_ARBITER_BITS_MASK     GENMASK(20, 0)
+
+/* Cause coalesce registers. */
+#define MLXBF_I2C_CAUSE_COALESCE_0        0x00
+#define MLXBF_I2C_CAUSE_COALESCE_1        0x04
+#define MLXBF_I2C_CAUSE_COALESCE_2        0x08
+
+#define MLXBF_I2C_CAUSE_TYU_SLAVE_BIT   MLXBF_I2C_SMBUS_MAX
+#define MLXBF_I2C_CAUSE_YU_SLAVE_BIT    1
+
+/* Functional enable register. */
+#define MLXBF_I2C_GPIO_0_FUNC_EN_0    0x28
+/* Force OE enable register. */
+#define MLXBF_I2C_GPIO_0_FORCE_OE_EN  0x30
+/*
+ * Note that Smbus GWs are on GPIOs 30:25. Two pins are used to control
+ * SDA/SCL lines:
+ *
+ *  SMBUS GW0 -> bits[26:25]
+ *  SMBUS GW1 -> bits[28:27]
+ *  SMBUS GW2 -> bits[30:29]
+ */
+#define MLXBF_I2C_GPIO_SMBUS_GW_PINS(num) (25 + ((num) << 1))
+
+/* Note that gw_id can be 0,1 or 2. */
+#define MLXBF_I2C_GPIO_SMBUS_GW_MASK(num) \
+	(0xffffffff & (~(0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num))))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(num, val) \
+	((val) & MLXBF_I2C_GPIO_SMBUS_GW_MASK(num))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(num, val) \
+	((val) | (0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num)))
+
+/* SMBus timing parameters. */
+#define MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH    0x00
+#define MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE     0x04
+#define MLXBF_I2C_SMBUS_TIMER_THOLD               0x08
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP   0x0c
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA         0x10
+#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF            0x14
+#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT           0x18
+
+enum {
+	MLXBF_I2C_TIMING_100KHZ = 100000,
+	MLXBF_I2C_TIMING_400KHZ = 400000,
+	MLXBF_I2C_TIMING_1000KHZ = 1000000,
+};
+
+/*
+ * Defines SMBus operating frequency and core clock frequency.
+ * According to ADB files, default values are compliant to 100KHz SMBus
+ * @ 400MHz core clock. The driver should be able to calculate core
+ * frequency based on PLL parameters.
+ */
+#define MLXBF_I2C_COREPLL_FREQ          MLXBF_I2C_TYU_PLL_OUT_FREQ
+
+/* Core PLL TYU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_TYU_MASK   GENMASK(12, 0)
+#define MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK  GENMASK(3, 0)
+#define MLXBF_I2C_COREPLL_CORE_R_TYU_MASK   GENMASK(5, 0)
+
+#define MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT  3
+#define MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT 16
+#define MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT  20
+
+/* Core PLL YU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_YU_MASK    GENMASK(25, 0)
+#define MLXBF_I2C_COREPLL_CORE_OD_YU_MASK   GENMASK(3, 0)
+#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK    GENMASK(5, 0)
+
+#define MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT   0
+#define MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT  1
+#define MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT   26
+
+/* Core PLL frequency. */
+static u64 mlxbf_i2c_corepll_frequency;
+
+/* SMBus Master GW. */
+#define MLXBF_I2C_SMBUS_MASTER_GW     0x200
+/* Number of bytes received and sent. */
+#define MLXBF_I2C_SMBUS_RS_BYTES      0x300
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_MASTER_PEC    0x304
+/* Status bits (ACK/NACK/FW Timeout). */
+#define MLXBF_I2C_SMBUS_MASTER_STATUS 0x308
+/* SMbus Master Finite State Machine. */
+#define MLXBF_I2C_SMBUS_MASTER_FSM    0x310
+
+/*
+ * When enabled, the master will issue a stop condition in case of
+ * timeout while waiting for FW response.
+ */
+#define MLXBF_I2C_SMBUS_EN_FW_TIMEOUT 0x31c
+
+/* SMBus master GW control bits offset in MLXBF_I2C_SMBUS_MASTER_GW[31:3]. */
+#define MLXBF_I2C_MASTER_LOCK_BIT         BIT(31) /* Lock bit. */
+#define MLXBF_I2C_MASTER_BUSY_BIT         BIT(30) /* Busy bit. */
+#define MLXBF_I2C_MASTER_START_BIT        BIT(29) /* Control start. */
+#define MLXBF_I2C_MASTER_CTL_WRITE_BIT    BIT(28) /* Control write phase. */
+#define MLXBF_I2C_MASTER_CTL_READ_BIT     BIT(19) /* Control read phase. */
+#define MLXBF_I2C_MASTER_STOP_BIT         BIT(3)  /* Control stop. */
+
+#define MLXBF_I2C_MASTER_ENABLE \
+	(MLXBF_I2C_MASTER_LOCK_BIT | MLXBF_I2C_MASTER_BUSY_BIT | \
+	 MLXBF_I2C_MASTER_START_BIT | MLXBF_I2C_MASTER_STOP_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_WRITE \
+	(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_WRITE_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_READ \
+	(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_READ_BIT)
+
+#define MLXBF_I2C_MASTER_SLV_ADDR_SHIFT   12 /* Slave address shift. */
+#define MLXBF_I2C_MASTER_WRITE_SHIFT      21 /* Control write bytes shift. */
+#define MLXBF_I2C_MASTER_SEND_PEC_SHIFT   20 /* Send PEC byte shift. */
+#define MLXBF_I2C_MASTER_PARSE_EXP_SHIFT  11 /* Parse expected bytes shift. */
+#define MLXBF_I2C_MASTER_READ_SHIFT       4  /* Control read bytes shift. */
+
+/* SMBus master GW Data descriptor. */
+#define MLXBF_I2C_MASTER_DATA_DESC_ADDR   0x280
+#define MLXBF_I2C_MASTER_DATA_DESC_SIZE   0x80 /* Size in bytes. */
+
+/* Maximum bytes to read/write per SMBus transaction. */
+#define MLXBF_I2C_MASTER_DATA_R_LENGTH  MLXBF_I2C_MASTER_DATA_DESC_SIZE
+#define MLXBF_I2C_MASTER_DATA_W_LENGTH (MLXBF_I2C_MASTER_DATA_DESC_SIZE - 1)
+
+/* All bytes were transmitted. */
+#define MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE      BIT(0)
+/* NACK received. */
+#define MLXBF_I2C_SMBUS_STATUS_NACK_RCV           BIT(1)
+/* Slave's byte count >128 bytes. */
+#define MLXBF_I2C_SMBUS_STATUS_READ_ERR           BIT(2)
+/* Timeout occurred. */
+#define MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT         BIT(3)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_MASK        GENMASK(3, 0)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR \
+	(MLXBF_I2C_SMBUS_STATUS_NACK_RCV | \
+	 MLXBF_I2C_SMBUS_STATUS_READ_ERR | \
+	 MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT)
+
+#define MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK      BIT(31)
+#define MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK  BIT(15)
+
+/* SMBus slave GW. */
+#define MLXBF_I2C_SMBUS_SLAVE_GW              0x400
+/* Number of bytes received and sent from/to master. */
+#define MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES 0x500
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_SLAVE_PEC             0x504
+/* SMBus slave Finite State Machine (FSM). */
+#define MLXBF_I2C_SMBUS_SLAVE_FSM             0x510
+/*
+ * Should be set when all raised causes handled, and cleared by HW on
+ * every new cause.
+ */
+#define MLXBF_I2C_SMBUS_SLAVE_READY           0x52c
+
+/* SMBus slave GW control bits offset in MLXBF_I2C_SMBUS_SLAVE_GW[31:19]. */
+#define MLXBF_I2C_SLAVE_BUSY_BIT         BIT(30) /* Busy bit. */
+#define MLXBF_I2C_SLAVE_WRITE_BIT        BIT(29) /* Control write enable. */
+
+#define MLXBF_I2C_SLAVE_ENABLE \
+	(MLXBF_I2C_SLAVE_BUSY_BIT | MLXBF_I2C_SLAVE_WRITE_BIT)
+
+#define MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT 22 /* Number of bytes to write. */
+#define MLXBF_I2C_SLAVE_SEND_PEC_SHIFT    21 /* Send PEC byte shift. */
+
+/* SMBus slave GW Data descriptor. */
+#define MLXBF_I2C_SLAVE_DATA_DESC_ADDR   0x480
+#define MLXBF_I2C_SLAVE_DATA_DESC_SIZE   0x80 /* Size in bytes. */
+
+/* SMbus slave configuration registers. */
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG        0x514
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT        16
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT     7
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK       GENMASK(6, 0)
+
+#define MLXBF_I2C_SLAVE_ADDR_ENABLED(addr) \
+	((addr) & (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT))
+
+/*
+ * Timeout is given in microsends. Note also that timeout handling is not
+ * exact.
+ */
+#define MLXBF_I2C_SMBUS_TIMEOUT   (300 * 1000) /* 300ms */
+
+/* Encapsulates timing parameters. */
+struct mlxbf_i2c_timings {
+	u16 scl_high;		/* Clock high period. */
+	u16 scl_low;		/* Clock low period. */
+	u8 sda_rise;		/* Data rise time. */
+	u8 sda_fall;		/* Data fall time. */
+	u8 scl_rise;		/* Clock rise time. */
+	u8 scl_fall;		/* Clock fall time. */
+	u16 hold_start;		/* Hold time after (REPEATED) START. */
+	u16 hold_data;		/* Data hold time. */
+	u16 setup_start;	/* REPEATED START condition setup time. */
+	u16 setup_stop;		/* STOP condition setup time. */
+	u16 setup_data;		/* Data setup time. */
+	u16 pad;		/* Padding. */
+	u16 buf;		/* Bus free time between STOP and START. */
+	u16 thigh_max;		/* Thigh max. */
+	u32 timeout;		/* Detect clock low timeout. */
+};
+
+enum {
+	MLXBF_I2C_F_READ = BIT(0),
+	MLXBF_I2C_F_WRITE = BIT(1),
+	MLXBF_I2C_F_NORESTART = BIT(3),
+	MLXBF_I2C_F_SMBUS_OPERATION = BIT(4),
+	MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
+	MLXBF_I2C_F_SMBUS_PEC = BIT(6),
+	MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
+};
+
+struct mlxbf_i2c_smbus_operation {
+	u32 flags;
+	u32 length; /* Buffer length in bytes. */
+	u8 *buffer;
+};
+
+#define MLXBF_I2C_SMBUS_OP_CNT_1	1
+#define MLXBF_I2C_SMBUS_OP_CNT_2	2
+#define MLXBF_I2C_SMBUS_OP_CNT_3	3
+#define MLXBF_I2C_SMBUS_MAX_OP_CNT	MLXBF_I2C_SMBUS_OP_CNT_3
+
+struct mlxbf_i2c_smbus_request {
+	u8 slave;
+	u8 operation_cnt;
+	struct mlxbf_i2c_smbus_operation operation[MLXBF_I2C_SMBUS_MAX_OP_CNT];
+};
+
+struct mlxbf_i2c_resource {
+	void __iomem *io;
+	struct resource *params;
+	struct mutex *lock; /* Mutex to protect mlxbf_i2c_resource. */
+	u8 type;
+};
+
+/* List of chip resources that are being accessed by the driver. */
+enum {
+	MLXBF_I2C_SMBUS_RES,
+	MLXBF_I2C_MST_CAUSE_RES,
+	MLXBF_I2C_SLV_CAUSE_RES,
+	MLXBF_I2C_COALESCE_RES,
+	MLXBF_I2C_COREPLL_RES,
+	MLXBF_I2C_GPIO_RES,
+	MLXBF_I2C_END_RES,
+};
+
+/* Helper macro to define an I2C resource parameters. */
+#define MLXBF_I2C_RES_PARAMS(addr, size, str) \
+	{ \
+		.start = (addr), \
+		.end = (addr) + (size) - 1, \
+		.name = (str) \
+	}
+
+static struct resource mlxbf_i2c_coalesce_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COALESCE_TYU_ADDR,
+				     MLXBF_I2C_COALESCE_TYU_SIZE,
+				     "COALESCE_MEM");
+static struct resource mlxbf_i2c_corepll_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_TYU_ADDR,
+				     MLXBF_I2C_COREPLL_TYU_SIZE,
+				     "COREPLL_MEM");
+static struct resource mlxbf_i2c_corepll_yu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_YU_ADDR,
+				     MLXBF_I2C_COREPLL_YU_SIZE,
+				     "COREPLL_MEM");
+static struct resource mlxbf_i2c_gpio_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_GPIO_TYU_ADDR,
+				     MLXBF_I2C_GPIO_TYU_SIZE,
+				     "GPIO_MEM");
+
+static struct mutex mlxbf_i2c_coalesce_lock;
+static struct mutex mlxbf_i2c_corepll_lock;
+static struct mutex mlxbf_i2c_gpio_lock;
+
+/* Mellanox BlueField chip type. */
+enum mlxbf_i2c_chip_type {
+	MLXBF_I2C_CHIP_TYPE_1, /* Mellanox BlueField-1 chip. */
+	MLXBF_I2C_CHIP_TYPE_2, /* Mallanox BlueField-2 chip. */
+};
+
+struct mlxbf_i2c_chip_info {
+	enum mlxbf_i2c_chip_type type;
+	/* Chip shared resources that are being used by the I2C controller. */
+	struct mlxbf_i2c_resource *shared_res[MLXBF_I2C_SHARED_RES_MAX];
+
+	/* Callback to calculate the core PLL frequency. */
+	u64 (*calculate_freq)(struct mlxbf_i2c_resource *corepll_res);
+};
+
+struct mlxbf_i2c_priv {
+	const struct mlxbf_i2c_chip_info *chip;
+	struct i2c_adapter adap;
+	struct mlxbf_i2c_resource *smbus;
+	struct mlxbf_i2c_resource *mst_cause;
+	struct mlxbf_i2c_resource *slv_cause;
+	struct mlxbf_i2c_resource *coalesce;
+	u64 frequency; /* Core frequency in Hz. */
+	int bus; /* Physical bus identifier. */
+	int irq;
+	struct i2c_client *slave;
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_coalesce_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_coalesce_tyu_params,
+		.lock = &mlxbf_i2c_coalesce_lock,
+		.type = MLXBF_I2C_COALESCE_RES
+	},
+	{}
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_corepll_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_corepll_tyu_params,
+		.lock = &mlxbf_i2c_corepll_lock,
+		.type = MLXBF_I2C_COREPLL_RES
+	},
+	[MLXBF_I2C_CHIP_TYPE_2] = {
+		.params = &mlxbf_i2c_corepll_yu_params,
+		.lock = &mlxbf_i2c_corepll_lock,
+		.type = MLXBF_I2C_COREPLL_RES,
+	}
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_gpio_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_gpio_tyu_params,
+		.lock = &mlxbf_i2c_gpio_lock,
+		.type = MLXBF_I2C_GPIO_RES
+	},
+	{}
+};
+
+static u8 mlxbf_i2c_bus_count;
+
+static struct mutex mlxbf_i2c_bus_lock;
+
+/* Polling frequency in microseconds. */
+#define MLXBF_I2C_POLL_FREQ_IN_USEC        200
+
+#define MLXBF_I2C_SHIFT_0   0
+#define MLXBF_I2C_SHIFT_8   8
+#define MLXBF_I2C_SHIFT_16  16
+#define MLXBF_I2C_SHIFT_24  24
+
+#define MLXBF_I2C_MASK_8    GENMASK(7, 0)
+#define MLXBF_I2C_MASK_16   GENMASK(15, 0)
+
+#define MLXBF_I2C_FREQUENCY_1GHZ  1000000000
+
+static void mlxbf_i2c_write(void __iomem *io, int reg, u32 val)
+{
+	writel(val, io + reg);
+}
+
+static u32 mlxbf_i2c_read(void __iomem *io, int reg)
+{
+	return readl(io + reg);
+}
+
+/*
+ * This function is used to read data from Master GW Data Descriptor.
+ * Data bytes in the Master GW Data Descriptor are shifted left so the
+ * data starts at the MSB of the descriptor registers as set by the
+ * underlying hardware. TYU_READ_DATA enables byte swapping while
+ * reading data bytes, and MUST be called by the SMBus read routines
+ * to copy data from the 32 * 32-bit HW Data registers a.k.a Master GW
+ * Data Descriptor.
+ */
+static u32 mlxbf_i2c_read_data(void __iomem *io, int reg)
+{
+	return (u32)be32_to_cpu(mlxbf_i2c_read(io, reg));
+}
+
+/*
+ * This function is used to write data to the Master GW Data Descriptor.
+ * Data copied to the Master GW Data Descriptor MUST be shifted left so
+ * the data starts at the MSB of the descriptor registers as required by
+ * the underlying hardware. TYU_WRITE_DATA enables byte swapping when
+ * writing data bytes, and MUST be called by the SMBus write routines to
+ * copy data to the 32 * 32-bit HW Data registers a.k.a Master GW Data
+ * Descriptor.
+ */
+static void mlxbf_i2c_write_data(void __iomem *io, int reg, u32 val)
+{
+	mlxbf_i2c_write(io, reg, (u32)cpu_to_be32(val));
+}
+
+/*
+ * Function to poll a set of bits at a specific address; it checks whether
+ * the bits are equal to zero when eq_zero is set to 'true', and not equal
+ * to zero when eq_zero is set to 'false'.
+ * Note that the timeout is given in microseconds.
+ */
+static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask,
+			    bool eq_zero, u32  timeout)
+{
+	u32 bits;
+
+	timeout = (timeout / MLXBF_I2C_POLL_FREQ_IN_USEC) + 1;
+
+	do {
+		bits = mlxbf_i2c_read(io, addr) & mask;
+		if (eq_zero ? bits == 0 : bits != 0)
+			return eq_zero ? 1 : bits;
+		udelay(MLXBF_I2C_POLL_FREQ_IN_USEC);
+	} while (timeout-- != 0);
+
+	return 0;
+}
+
+/*
+ * SW must make sure that the SMBus Master GW is idle before starting
+ * a transaction. Accordingly, this function polls the Master FSM stop
+ * bit; it returns false when the bit is asserted, true if not.
+ */
+static bool mlxbf_smbus_master_wait_for_idle(struct mlxbf_i2c_priv *priv)
+{
+	u32 mask = MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK;
+	u32 addr = MLXBF_I2C_SMBUS_MASTER_FSM;
+	u32 timeout = MLXBF_I2C_SMBUS_TIMEOUT;
+
+	if (mlxbf_smbus_poll(priv->smbus->io, addr, mask, true, timeout))
+		return true;
+
+	return false;
+}
+
+static bool mlxbf_i2c_smbus_transaction_success(u32 master_status,
+						u32 cause_status)
+{
+	/*
+	 * When transaction ended with STOP, all bytes were transmitted,
+	 * and no NACK received, then the transaction ended successfully.
+	 * On the other hand, when the GW is configured with the stop bit
+	 * de-asserted then the SMBus expects the following GW configuration
+	 * for transfer continuation.
+	 */
+	if ((cause_status & MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA) ||
+	    ((cause_status & MLXBF_I2C_CAUSE_TRANSACTION_ENDED) &&
+	     (master_status & MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE) &&
+	     !(master_status & MLXBF_I2C_SMBUS_STATUS_NACK_RCV)))
+		return true;
+
+	return false;
+}
+
+/*
+ * Poll SMBus master status and return transaction status,
+ * i.e. whether succeeded or failed. I2C and SMBus fault codes
+ * are returned as negative numbers from most calls, with zero
+ * or some positive number indicating a non-fault return.
+ */
+static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
+{
+	u32 master_status_bits;
+	u32 cause_status_bits;
+
+	/*
+	 * GW busy bit is raised by the driver and cleared by the HW
+	 * when the transaction is completed. The busy bit is a good
+	 * indicator of transaction status. So poll the busy bit, and
+	 * then read the cause and master status bits to determine if
+	 * errors occurred during the transaction.
+	 */
+	mlxbf_smbus_poll(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW,
+			 MLXBF_I2C_MASTER_BUSY_BIT, true,
+			 MLXBF_I2C_SMBUS_TIMEOUT);
+
+	/* Read cause status bits. */
+	cause_status_bits = mlxbf_i2c_read(priv->mst_cause->io,
+					   MLXBF_I2C_CAUSE_ARBITER);
+	cause_status_bits &= MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK;
+
+	/*
+	 * Parse both Cause and Master GW bits, then return transaction status.
+	 */
+
+	master_status_bits = mlxbf_i2c_read(priv->smbus->io,
+					    MLXBF_I2C_SMBUS_MASTER_STATUS);
+	master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK;
+
+	if (mlxbf_i2c_smbus_transaction_success(master_status_bits,
+						cause_status_bits))
+		return 0;
+
+	/*
+	 * In case of timeout on GW busy, the ISR will clear busy bit but
+	 * transaction ended bits cause will not be set so the transaction
+	 * fails. Then, we must check Master GW status bits.
+	 */
+	if ((master_status_bits & MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR) &&
+	    (cause_status_bits & (MLXBF_I2C_CAUSE_TRANSACTION_ENDED |
+				  MLXBF_I2C_CAUSE_M_GW_BUSY_FALL)))
+		return -EIO;
+
+	if (cause_status_bits & MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR)
+		return -EAGAIN;
+
+	return -ETIMEDOUT;
+}
+
+static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
+				       const u8 *data, u8 length, u32 addr)
+{
+	u8 offset, aligned_length;
+	u32 data32;
+
+	aligned_length = round_up(length, 4);
+
+	/* Copy data bytes from 4-byte aligned source buffer. */
+	for (offset = 0; offset < aligned_length; offset += sizeof(u32)) {
+		data32 = *((u32 *)(data + offset));
+		mlxbf_i2c_write_data(priv->smbus->io, addr + offset, data32);
+	}
+}
+
+static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
+				      u8 *data, u8 length, u32 addr)
+{
+	u32 data32, mask;
+	u8 byte, offset;
+
+	mask = sizeof(u32) - 1;
+
+	for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) {
+		data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+		*((u32 *)(data + offset)) = data32;
+	}
+
+	if (!(length & mask))
+		return;
+
+	data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+
+	for (byte = 0; byte < (length & mask); byte++) {
+		data[offset + byte] = data32 & GENMASK(7, 0);
+		data32 = ror32(data32, MLXBF_I2C_SHIFT_8);
+	}
+}
+
+static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
+				  u8 len, u8 block_en, u8 pec_en, bool read)
+{
+	u32 command;
+
+	/* Set Master GW control word. */
+	if (read) {
+		command = MLXBF_I2C_MASTER_ENABLE_READ;
+		command |= rol32(len, MLXBF_I2C_MASTER_READ_SHIFT);
+	} else {
+		command = MLXBF_I2C_MASTER_ENABLE_WRITE;
+		command |= rol32(len, MLXBF_I2C_MASTER_WRITE_SHIFT);
+	}
+	command |= rol32(slave, MLXBF_I2C_MASTER_SLV_ADDR_SHIFT);
+	command |= rol32(block_en, MLXBF_I2C_MASTER_PARSE_EXP_SHIFT);
+	command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT);
+
+	/* Clear status bits. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_STATUS, 0x0);
+	/* Set the cause data. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+	/* Zero PEC byte. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_PEC, 0x0);
+	/* Zero byte count. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_RS_BYTES, 0x0);
+
+	/* GW activation. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW, command);
+
+	/*
+	 * Poll master status and check status bits. An ACK is sent when
+	 * completing writing data to the bus (Master 'byte_count_done' bit
+	 * is set to 1).
+	 */
+	return mlxbf_i2c_smbus_check_status(priv);
+}
+
+static int
+mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
+				  struct mlxbf_i2c_smbus_request *request)
+{
+	u8 data_desc[MLXBF_I2C_MASTER_DATA_DESC_SIZE] = { 0 };
+	u8 op_idx, data_idx, data_len, write_len, read_len;
+	struct mlxbf_i2c_smbus_operation *operation;
+	u8 read_en, write_en, block_en, pec_en;
+	u8 slave, flags, addr;
+	u8 *read_buf;
+	int ret = 0;
+
+	if (request->operation_cnt > MLXBF_I2C_SMBUS_MAX_OP_CNT)
+		return -EINVAL;
+
+	read_buf = NULL;
+	data_idx = 0;
+	read_en = 0;
+	write_en = 0;
+	write_len = 0;
+	read_len = 0;
+	block_en = 0;
+	pec_en = 0;
+	slave = request->slave & GENMASK(6, 0);
+	addr = slave << 1;
+
+	/* First of all, check whether the HW is idle. */
+	if (WARN_ON(!mlxbf_smbus_master_wait_for_idle(priv)))
+		return -EBUSY;
+
+	/* Set first byte. */
+	data_desc[data_idx++] = addr;
+
+	for (op_idx = 0; op_idx < request->operation_cnt; op_idx++) {
+		operation = &request->operation[op_idx];
+		flags = operation->flags;
+
+		/*
+		 * Note that read and write operations might be handled by a
+		 * single command. If the MLXBF_I2C_F_SMBUS_OPERATION is set
+		 * then write command byte and set the optional SMBus specific
+		 * bits such as block_en and pec_en. These bits MUST be
+		 * submitted by the first operation only.
+		 */
+		if (op_idx == 0 && flags & MLXBF_I2C_F_SMBUS_OPERATION) {
+			block_en = flags & MLXBF_I2C_F_SMBUS_BLOCK;
+			pec_en = flags & MLXBF_I2C_F_SMBUS_PEC;
+		}
+
+		if (flags & MLXBF_I2C_F_WRITE) {
+			write_en = 1;
+			write_len += operation->length;
+			memcpy(data_desc + data_idx,
+			       operation->buffer, operation->length);
+			data_idx += operation->length;
+		}
+		/*
+		 * We assume that read operations are performed only once per
+		 * SMBus transaction. *TBD* protect this statement so it won't
+		 * be executed twice? or return an error if we try to read more
+		 * than once?
+		 */
+		if (flags & MLXBF_I2C_F_READ) {
+			read_en = 1;
+			/* Subtract 1 as required by HW. */
+			read_len = operation->length - 1;
+			read_buf = operation->buffer;
+		}
+	}
+
+	/* Set Master GW data descriptor. */
+	data_len = write_len + 1; /* Add one byte of the slave address. */
+	/*
+	 * Note that data_len cannot be 0. Indeed, the slave address byte
+	 * must be written to the data registers.
+	 */
+	mlxbf_i2c_smbus_write_data(priv, (const u8 *)data_desc, data_len,
+				   MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+
+	if (write_en) {
+		ret = mlxbf_i2c_smbus_enable(priv, slave, write_len, block_en,
+					 pec_en, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (read_en) {
+		/* Write slave address to Master GW data descriptor. */
+		mlxbf_i2c_smbus_write_data(priv, (const u8 *)&addr, 1,
+					   MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+		ret = mlxbf_i2c_smbus_enable(priv, slave, read_len, block_en,
+					 pec_en, 1);
+		if (!ret) {
+			/* Get Master GW data descriptor. */
+			mlxbf_i2c_smbus_read_data(priv, data_desc, read_len + 1,
+					     MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+
+			/* Get data from Master GW data descriptor. */
+			memcpy(read_buf, data_desc, read_len + 1);
+		}
+
+		/*
+		 * After a read operation the SMBus FSM ps (present state)
+		 * needs to be 'manually' reset. This should be removed in
+		 * next tag integration.
+		 */
+		mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_FSM,
+				MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK);
+	}
+
+	return ret;
+}
+
+/* I2C SMBus protocols. */
+
+static void
+mlxbf_i2c_smbus_quick_command(struct mlxbf_i2c_smbus_request *request,
+			      u8 read)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+	request->operation[0].length = 0;
+	request->operation[0].flags = MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= read ? MLXBF_I2C_F_READ : 0;
+}
+
+static void mlxbf_i2c_smbus_byte_func(struct mlxbf_i2c_smbus_request *request,
+				      u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+	request->operation[0].length = 1;
+	request->operation[0].length += pec_check;
+
+	request->operation[0].flags = MLXBF_I2C_F_SMBUS_OPERATION;
+	request->operation[0].flags |= read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+
+	request->operation[0].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_byte_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 1;
+	request->operation[1].length += pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_word_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 2;
+	request->operation[1].length += pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_i2c_block_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, u8 *data_len, bool read,
+			       bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	/*
+	 * As specified in the standard, the max number of bytes to read/write
+	 * per block operation is 32 bytes. In Golan code, the controller can
+	 * read up to 128 bytes and write up to 127 bytes.
+	 */
+	request->operation[1].length =
+	    (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	/*
+	 * Skip the first data byte, which corresponds to the number of bytes
+	 * to read/write.
+	 */
+	request->operation[1].buffer = data + 1;
+
+	*data_len = request->operation[1].length;
+
+	/* Set the number of byte to read. This will be used by userspace. */
+	if (read)
+		data[0] = *data_len;
+}
+
+static void mlxbf_i2c_smbus_block_func(struct mlxbf_i2c_smbus_request *request,
+				       u8 *command, u8 *data, u8 *data_len,
+				       bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length =
+	    (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data + 1;
+
+	*data_len = request->operation[1].length;
+
+	/* Set the number of bytes to read. This will be used by userspace. */
+	if (read)
+		data[0] = *data_len;
+}
+
+static void
+mlxbf_i2c_smbus_process_call_func(struct mlxbf_i2c_smbus_request *request,
+				  u8 *command, u8 *data, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 2;
+	request->operation[1].flags = MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+
+	request->operation[2].length = 3;
+	request->operation[2].flags = MLXBF_I2C_F_READ;
+	request->operation[2].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_blk_process_call_func(struct mlxbf_i2c_smbus_request *request,
+				      u8 *command, u8 *data, u8 *data_len,
+				      bool pec_check)
+{
+	u32 length;
+
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= (pec_check) ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	length = (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+
+	request->operation[1].length = length - pec_check;
+	request->operation[1].flags = MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+
+	request->operation[2].length = length;
+	request->operation[2].flags = MLXBF_I2C_F_READ;
+	request->operation[2].buffer = data;
+
+	*data_len = length; /* including PEC byte. */
+}
+
+/* Initialization functions. */
+
+static bool mlxbf_i2c_has_chip_type(struct mlxbf_i2c_priv *priv, u8 type)
+{
+	return priv->chip->type == type;
+}
+
+static struct mlxbf_i2c_resource *
+mlxbf_i2c_get_shared_resource(struct mlxbf_i2c_priv *priv, u8 type)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	struct mlxbf_i2c_resource *res;
+	u8 res_idx = 0;
+
+	for (res_idx = 0; res_idx < MLXBF_I2C_SHARED_RES_MAX; res_idx++) {
+		res = chip->shared_res[res_idx];
+		if (res && res->type == type)
+			return res;
+	}
+
+	return NULL;
+}
+
+static int mlxbf_i2c_init_resource(struct platform_device *pdev,
+				   struct mlxbf_i2c_resource **res,
+				   u8 type)
+{
+	struct mlxbf_i2c_resource *tmp_res;
+	struct device *dev = &pdev->dev;
+
+	if (!res || *res || type >= MLXBF_I2C_END_RES)
+		return -EINVAL;
+
+	tmp_res = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource),
+			       GFP_KERNEL);
+	if (!tmp_res)
+		return -ENOMEM;
+
+	tmp_res->params = platform_get_resource(pdev, IORESOURCE_MEM, type);
+	if (!tmp_res->params) {
+		devm_kfree(dev, tmp_res);
+		return -EIO;
+	}
+
+	tmp_res->io = devm_ioremap_resource(dev, tmp_res->params);
+	if (IS_ERR(tmp_res->io)) {
+		devm_kfree(dev, tmp_res);
+		return PTR_ERR(tmp_res->io);
+	}
+
+	tmp_res->type = type;
+
+	*res = tmp_res;
+
+	return 0;
+}
+
+static u32 mlxbf_i2c_get_ticks(struct mlxbf_i2c_priv *priv, u64 nanoseconds,
+			       bool minimum)
+{
+	u64 frequency;
+	u32 ticks;
+
+	/*
+	 * Compute ticks as follow:
+	 *
+	 *           Ticks
+	 * Time = --------- x 10^9    =>    Ticks = Time x Frequency x 10^-9
+	 *         Frequency
+	 */
+	frequency = priv->frequency;
+	ticks = (nanoseconds * frequency) / MLXBF_I2C_FREQUENCY_1GHZ;
+	/*
+	 * The number of ticks is rounded down and if minimum is equal to 1
+	 * then add one tick.
+	 */
+	if (minimum)
+		ticks++;
+
+	return ticks;
+}
+
+static u32 mlxbf_i2c_set_timer(struct mlxbf_i2c_priv *priv, u64 nsec, bool opt,
+			       u32 mask, u8 shift)
+{
+	u32 val = (mlxbf_i2c_get_ticks(priv, nsec, opt) & mask) << shift;
+
+	return val;
+}
+
+static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
+				  const struct mlxbf_i2c_timings *timings)
+{
+	u32 timer;
+
+	timer = mlxbf_i2c_set_timer(priv, timings->scl_high,
+				    false, MLXBF_I2C_MASK_16,
+				    MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_low,
+				     false, MLXBF_I2C_MASK_16,
+				     MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false,
+				    MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->sda_fall, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_8);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_rise, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_THOLD, timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP, timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->buf, false,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_THIGH_MAX_TBUF,
+			timer);
+
+	timer = timings->timeout;
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT,
+			timer);
+}
+
+enum mlxbf_i2c_timings_config {
+	MLXBF_I2C_TIMING_CONFIG_100KHZ,
+	MLXBF_I2C_TIMING_CONFIG_400KHZ,
+	MLXBF_I2C_TIMING_CONFIG_1000KHZ,
+};
+
+/*
+ * Note that the mlxbf_i2c_timings->timeout value is not related to the
+ * bus frequency, it is impacted by the time it takes the driver to
+ * complete data transmission before transaction abort.
+ */
+static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = {
+	[MLXBF_I2C_TIMING_CONFIG_100KHZ] = {
+		.scl_high = 4810,
+		.scl_low = 5000,
+		.hold_start = 4000,
+		.setup_start = 4800,
+		.setup_stop = 4000,
+		.setup_data = 250,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	},
+	[MLXBF_I2C_TIMING_CONFIG_400KHZ] = {
+		.scl_high = 1011,
+		.scl_low = 1300,
+		.hold_start = 600,
+		.setup_start = 700,
+		.setup_stop = 600,
+		.setup_data = 100,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	},
+	[MLXBF_I2C_TIMING_CONFIG_1000KHZ] = {
+		.scl_high = 600,
+		.scl_low = 1300,
+		.hold_start = 600,
+		.setup_start = 600,
+		.setup_stop = 600,
+		.setup_data = 100,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	}
+};
+
+static int mlxbf_i2c_init_timings(struct platform_device *pdev,
+				  struct mlxbf_i2c_priv *priv)
+{
+	enum mlxbf_i2c_timings_config config_idx;
+	struct device *dev = &pdev->dev;
+	u32 config_khz;
+
+	int ret;
+
+	ret = device_property_read_u32(dev, "clock-frequency", &config_khz);
+	if (ret < 0)
+		config_khz = MLXBF_I2C_TIMING_100KHZ;
+
+	switch (config_khz) {
+	default:
+		/* Default settings is 100 KHz. */
+		pr_warn("Illegal value %d: defaulting to 100 KHz\n",
+			config_khz);
+		fallthrough;
+	case MLXBF_I2C_TIMING_100KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
+		break;
+
+	case MLXBF_I2C_TIMING_400KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
+		break;
+
+	case MLXBF_I2C_TIMING_1000KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
+		break;
+	}
+
+	mlxbf_i2c_set_timings(priv, &mlxbf_i2c_timings[config_idx]);
+
+	return 0;
+}
+
+static int mlxbf_i2c_get_gpio(struct platform_device *pdev,
+			      struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	struct resource	*params;
+	resource_size_t size;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return -EPERM;
+
+	/*
+	 * The GPIO region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region and/or setting up the GPIO.
+	 */
+	lockdep_assert_held(gpio_res->lock);
+
+	/* Check whether the memory map exist. */
+	if (gpio_res->io)
+		return 0;
+
+	params = gpio_res->params;
+	size = resource_size(params);
+
+	if (!devm_request_mem_region(dev, params->start, size, params->name))
+		return -EFAULT;
+
+	gpio_res->io = devm_ioremap(dev, params->start, size);
+	if (IS_ERR(gpio_res->io)) {
+		devm_release_mem_region(dev, params->start, size);
+		return PTR_ERR(gpio_res->io);
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_release_gpio(struct platform_device *pdev,
+				  struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	struct resource	*params;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return 0;
+
+	mutex_lock(gpio_res->lock);
+
+	if (gpio_res->io) {
+		/* Release the GPIO resource. */
+		params = gpio_res->params;
+		devm_iounmap(dev, gpio_res->io);
+		devm_release_mem_region(dev, params->start,
+					resource_size(params));
+	}
+
+	mutex_unlock(gpio_res->lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_get_corepll(struct platform_device *pdev,
+				 struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+	resource_size_t size;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+	if (!corepll_res)
+		return -EPERM;
+
+	/*
+	 * The COREPLL region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region.
+	 */
+	lockdep_assert_held(corepll_res->lock);
+
+	/* Check whether the memory map exist. */
+	if (corepll_res->io)
+		return 0;
+
+	params = corepll_res->params;
+	size = resource_size(params);
+
+	if (!devm_request_mem_region(dev, params->start, size, params->name))
+		return -EFAULT;
+
+	corepll_res->io = devm_ioremap(dev, params->start, size);
+	if (IS_ERR(corepll_res->io)) {
+		devm_release_mem_region(dev, params->start, size);
+		return PTR_ERR(corepll_res->io);
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_release_corepll(struct platform_device *pdev,
+				     struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+
+	mutex_lock(corepll_res->lock);
+
+	if (corepll_res->io) {
+		/* Release the CorePLL resource. */
+		params = corepll_res->params;
+		devm_iounmap(dev, corepll_res->io);
+		devm_release_mem_region(dev, params->start,
+					resource_size(params));
+	}
+
+	mutex_unlock(corepll_res->lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_master(struct platform_device *pdev,
+				 struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	u32 config_reg;
+	int ret;
+
+	/* This configuration is only needed for BlueField 1. */
+	if (!mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1))
+		return 0;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return -EPERM;
+
+	/*
+	 * The GPIO region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region and/or setting up the GPIO.
+	 */
+
+	mutex_lock(gpio_res->lock);
+
+	ret = mlxbf_i2c_get_gpio(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get gpio resource");
+		mutex_unlock(gpio_res->lock);
+		return ret;
+	}
+
+	/*
+	 * TYU - Configuration for GPIO pins. Those pins must be asserted in
+	 * MLXBF_I2C_GPIO_0_FUNC_EN_0, i.e. GPIO 0 is controlled by HW, and must
+	 * be reset in MLXBF_I2C_GPIO_0_FORCE_OE_EN, i.e. GPIO_OE will be driven
+	 * instead of HW_OE.
+	 * For now, we do not reset the GPIO state when the driver is removed.
+	 * First, it is not necessary to disable the bus since we are using
+	 * the same busses. Then, some busses might be shared among Linux and
+	 * platform firmware; disabling the bus might compromise the system
+	 * functionality.
+	 */
+	config_reg = mlxbf_i2c_read(gpio_res->io,
+				    MLXBF_I2C_GPIO_0_FUNC_EN_0);
+	config_reg = MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(priv->bus,
+							 config_reg);
+	mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FUNC_EN_0,
+			config_reg);
+
+	config_reg = mlxbf_i2c_read(gpio_res->io,
+				    MLXBF_I2C_GPIO_0_FORCE_OE_EN);
+	config_reg = MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(priv->bus,
+							config_reg);
+	mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FORCE_OE_EN,
+			config_reg);
+
+	mutex_unlock(gpio_res->lock);
+
+	return 0;
+}
+
+static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res)
+{
+	u64 core_frequency, pad_frequency;
+	u8 core_od, core_r;
+	u32 corepll_val;
+	u16 core_f;
+
+	pad_frequency = MLXBF_I2C_TYU_PLL_IN_FREQ;
+
+	corepll_val = mlxbf_i2c_read(corepll_res->io,
+				     MLXBF_I2C_CORE_PLL_REG1);
+
+	/* Get Core PLL configuration bits. */
+	core_f = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_F_TYU_MASK;
+	core_od = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK;
+	core_r = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_R_TYU_MASK;
+
+	/*
+	 * Compute PLL output frequency as follow:
+	 *
+	 *                                       CORE_F + 1
+	 * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+	 *                              (CORE_R + 1) * (CORE_OD + 1)
+	 *
+	 * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+	 * and PadFrequency, respectively.
+	 */
+	core_frequency = pad_frequency * (++core_f);
+	core_frequency /= (++core_r) * (++core_od);
+
+	return core_frequency;
+}
+
+static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res)
+{
+	u32 corepll_reg1_val, corepll_reg2_val;
+	u64 corepll_frequency, pad_frequency;
+	u8 core_od, core_r;
+	u32 core_f;
+
+	pad_frequency = MLXBF_I2C_YU_PLL_IN_FREQ;
+
+	corepll_reg1_val = mlxbf_i2c_read(corepll_res->io,
+					  MLXBF_I2C_CORE_PLL_REG1);
+	corepll_reg2_val = mlxbf_i2c_read(corepll_res->io,
+					  MLXBF_I2C_CORE_PLL_REG2);
+
+	/* Get Core PLL configuration bits */
+	core_f = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_F_YU_MASK;
+	core_r = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_R_YU_MASK;
+	core_od = rol32(corepll_reg2_val,  MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_OD_YU_MASK;
+
+	/*
+	 * Compute PLL output frequency as follow:
+	 *
+	 *                                     CORE_F / 16384
+	 * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+	 *                              (CORE_R + 1) * (CORE_OD + 1)
+	 *
+	 * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+	 * and PadFrequency, respectively.
+	 */
+	corepll_frequency = (pad_frequency * core_f) / MLNXBF_I2C_COREPLL_CONST;
+	corepll_frequency /= (++core_r) * (++core_od);
+
+	return corepll_frequency;
+}
+
+static int mlxbf_i2c_calculate_corepll_freq(struct platform_device *pdev,
+					    struct mlxbf_i2c_priv *priv)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	u64 *freq = &priv->frequency;
+	int ret;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+	if (!corepll_res)
+		return -EPERM;
+
+	/*
+	 * First, check whether the TYU core Clock frequency is set.
+	 * The TYU core frequency is the same for all I2C busses; when
+	 * the first device gets probed the frequency is determined and
+	 * stored into a globally visible variable. So, first of all,
+	 * check whether the frequency is already set. Here, we assume
+	 * that the frequency is expected to be greater than 0.
+	 */
+	mutex_lock(corepll_res->lock);
+	if (!mlxbf_i2c_corepll_frequency) {
+		if (!chip->calculate_freq) {
+			mutex_unlock(corepll_res->lock);
+			return -EPERM;
+		}
+
+		ret = mlxbf_i2c_get_corepll(pdev, priv);
+		if (ret < 0) {
+			dev_err(dev, "Failed to get corePLL resource");
+			mutex_unlock(corepll_res->lock);
+			return ret;
+		}
+
+		mlxbf_i2c_corepll_frequency = chip->calculate_freq(corepll_res);
+	}
+	mutex_unlock(corepll_res->lock);
+
+	*freq = mlxbf_i2c_corepll_frequency;
+
+	return 0;
+}
+
+static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr)
+{
+	u32 slave_reg, slave_reg_tmp, slave_reg_avail, slave_addr_mask;
+	u8 reg, reg_cnt, byte, addr_tmp, reg_avail, byte_avail;
+	bool avail, disabled;
+
+	disabled = false;
+	avail = false;
+
+	if (!priv)
+		return -EPERM;
+
+	reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+	slave_addr_mask = MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
+
+	/*
+	 * Read the slave registers. There are 4 * 32-bit slave registers.
+	 * Each slave register can hold up to 4 * 8-bit slave configuration
+	 * (7-bit address, 1 status bit (1 if enabled, 0 if not)).
+	 */
+	for (reg = 0; reg < reg_cnt; reg++) {
+		slave_reg = mlxbf_i2c_read(priv->smbus->io,
+				MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+		/*
+		 * Each register holds 4 slave addresses. So, we have to keep
+		 * the byte order consistent with the value read in order to
+		 * update the register correctly, if needed.
+		 */
+		slave_reg_tmp = slave_reg;
+		for (byte = 0; byte < 4; byte++) {
+			addr_tmp = slave_reg_tmp & GENMASK(7, 0);
+
+			/*
+			 * Mark the first available slave address slot, i.e. its
+			 * enabled bit should be unset. This slot might be used
+			 * later on to register our slave.
+			 */
+			if (!avail && !MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp)) {
+				avail = true;
+				reg_avail = reg;
+				byte_avail = byte;
+				slave_reg_avail = slave_reg;
+			}
+
+			/*
+			 * Parse slave address bytes and check whether the
+			 * slave address already exists and it's enabled,
+			 * i.e. most significant bit is set.
+			 */
+			if ((addr_tmp & slave_addr_mask) == addr) {
+				if (MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp))
+					return 0;
+				disabled = true;
+				break;
+			}
+
+			/* Parse next byte. */
+			slave_reg_tmp >>= 8;
+		}
+
+		/* Exit the loop if the slave address is found. */
+		if (disabled)
+			break;
+	}
+
+	if (!avail && !disabled)
+		return -EINVAL; /* No room for a new slave address. */
+
+	if (avail && !disabled) {
+		reg = reg_avail;
+		byte = byte_avail;
+		/* Set the slave address. */
+		slave_reg_avail &= ~(slave_addr_mask << (byte * 8));
+		slave_reg_avail |= addr << (byte * 8);
+		slave_reg = slave_reg_avail;
+	}
+
+	/* Enable the slave address and update the register. */
+	slave_reg |= (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT) << (byte * 8);
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+
+	return 0;
+}
+
+static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv)
+{
+	u32 slave_reg, slave_reg_tmp, slave_addr_mask;
+	u8 addr, addr_tmp, reg, reg_cnt, slave_byte;
+	struct i2c_client *client = priv->slave;
+	bool exist;
+
+	exist = false;
+
+	addr = client->addr;
+	reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+	slave_addr_mask = MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
+
+	/*
+	 * Read the slave registers. There are 4 * 32-bit slave registers.
+	 * Each slave register can hold up to 4 * 8-bit slave configuration
+	 * (7-bit address, 1 status bit (1 if enabled, 0 if not)).
+	 */
+	for (reg = 0; reg < reg_cnt; reg++) {
+		slave_reg = mlxbf_i2c_read(priv->smbus->io,
+				MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+
+		/* Check whether the address slots are empty. */
+		if (slave_reg == 0)
+			continue;
+
+		/*
+		 * Each register holds 4 slave addresses. So, we have to keep
+		 * the byte order consistent with the value read in order to
+		 * update the register correctly, if needed.
+		 */
+		slave_reg_tmp = slave_reg;
+		slave_byte = 0;
+		while (slave_reg_tmp != 0) {
+			addr_tmp = slave_reg_tmp & slave_addr_mask;
+			/*
+			 * Parse slave address bytes and check whether the
+			 * slave address already exists.
+			 */
+			if (addr_tmp == addr) {
+				exist = true;
+				break;
+			}
+
+			/* Parse next byte. */
+			slave_reg_tmp >>= 8;
+			slave_byte += 1;
+		}
+
+		/* Exit the loop if the slave address is found. */
+		if (exist)
+			break;
+	}
+
+	if (!exist)
+		return 0; /* Slave is not registered, nothing to do. */
+
+	/* Cleanup the slave address slot. */
+	slave_reg &= ~(GENMASK(7, 0) << (slave_byte * 8));
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_coalesce(struct platform_device *pdev,
+				   struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *coalesce_res;
+	struct resource *params;
+	resource_size_t size;
+	int ret = 0;
+
+	/*
+	 * Unlike BlueField-1 platform, the coalesce registers is a dedicated
+	 * resource in the next generations of BlueField.
+	 */
+	if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+		coalesce_res = mlxbf_i2c_get_shared_resource(priv,
+						MLXBF_I2C_COALESCE_RES);
+		if (!coalesce_res)
+			return -EPERM;
+
+		/*
+		 * The Cause Coalesce group in TYU space is shared among
+		 * I2C busses. This function MUST be serialized to avoid
+		 * racing when claiming the memory region.
+		 */
+		lockdep_assert_held(mlxbf_i2c_gpio_res->lock);
+
+		/* Check whether the memory map exist. */
+		if (coalesce_res->io) {
+			priv->coalesce = coalesce_res;
+			return 0;
+		}
+
+		params = coalesce_res->params;
+		size = resource_size(params);
+
+		if (!request_mem_region(params->start, size, params->name))
+			return -EFAULT;
+
+		coalesce_res->io = ioremap(params->start, size);
+		if (IS_ERR(coalesce_res->io)) {
+			release_mem_region(params->start, size);
+			return PTR_ERR(coalesce_res->io);
+		}
+
+		priv->coalesce = coalesce_res;
+
+	} else {
+		ret = mlxbf_i2c_init_resource(pdev, &priv->coalesce,
+					      MLXBF_I2C_COALESCE_RES);
+	}
+
+	return ret;
+}
+
+static int mlxbf_i2c_release_coalesce(struct platform_device *pdev,
+				      struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *coalesce_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+	resource_size_t size;
+
+	coalesce_res = priv->coalesce;
+
+	if (coalesce_res->io) {
+		params = coalesce_res->params;
+		size = resource_size(params);
+		if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+			mutex_lock(coalesce_res->lock);
+			iounmap(coalesce_res->io);
+			release_mem_region(params->start, size);
+			mutex_unlock(coalesce_res->lock);
+		} else {
+			devm_release_mem_region(dev, params->start, size);
+		}
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_slave(struct platform_device *pdev,
+				struct mlxbf_i2c_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	u32 int_reg;
+	int ret;
+
+	/* Reset FSM. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_FSM, 0);
+
+	/*
+	 * Enable slave cause interrupt bits. Drive
+	 * MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE and
+	 * MLXBF_I2C_CAUSE_WRITE_SUCCESS, these are enabled when an external
+	 * masters issue a Read and Write, respectively. But, clear all
+	 * interrupts first.
+	 */
+	mlxbf_i2c_write(priv->slv_cause->io,
+			  MLXBF_I2C_CAUSE_OR_CLEAR, ~0);
+	int_reg = MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE;
+	int_reg |= MLXBF_I2C_CAUSE_WRITE_SUCCESS;
+	mlxbf_i2c_write(priv->slv_cause->io,
+			  MLXBF_I2C_CAUSE_OR_EVTEN0, int_reg);
+
+	/* Finally, set the 'ready' bit to start handling transactions. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	/* Initialize the cause coalesce resource. */
+	ret = mlxbf_i2c_init_coalesce(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize cause coalesce\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read,
+				   bool *write)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	u32 coalesce0_reg, cause_reg;
+	u8 slave_shift, is_set;
+
+	*write = false;
+	*read = false;
+
+	slave_shift = chip->type != MLXBF_I2C_CHIP_TYPE_1 ?
+				MLXBF_I2C_CAUSE_YU_SLAVE_BIT :
+				priv->bus + MLXBF_I2C_CAUSE_TYU_SLAVE_BIT;
+
+	coalesce0_reg = mlxbf_i2c_read(priv->coalesce->io,
+				       MLXBF_I2C_CAUSE_COALESCE_0);
+	is_set = coalesce0_reg & (1 << slave_shift);
+
+	if (!is_set)
+		return false;
+
+	/* Check the source of the interrupt, i.e. whether a Read or Write. */
+	cause_reg = mlxbf_i2c_read(priv->slv_cause->io,
+				     MLXBF_I2C_CAUSE_ARBITER);
+	if (cause_reg & MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE)
+		*read = true;
+	else if (cause_reg & MLXBF_I2C_CAUSE_WRITE_SUCCESS)
+		*write = true;
+
+	/* Clear cause bits. */
+	mlxbf_i2c_write(priv->slv_cause->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+
+	return true;
+}
+
+static bool mlxbf_smbus_slave_wait_for_idle(struct mlxbf_i2c_priv *priv,
+					    u32 timeout)
+{
+	u32 mask = MLXBF_I2C_CAUSE_S_GW_BUSY_FALL;
+	u32 addr = MLXBF_I2C_CAUSE_ARBITER;
+
+	if (mlxbf_smbus_poll(priv->slv_cause->io, addr, mask, false, timeout))
+		return true;
+
+	return false;
+}
+
+/* Send byte to 'external' smbus master. */
+static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+	u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+	u8 write_size, pec_en, addr, byte, value, byte_cnt, desc_size;
+	struct i2c_client *slave = priv->slave;
+	u32 control32, data32;
+	int ret;
+
+	if (!slave)
+		return -EINVAL;
+
+	addr = 0;
+	byte = 0;
+	desc_size = MLXBF_I2C_SLAVE_DATA_DESC_SIZE;
+
+	/*
+	 * Read bytes received from the external master. These bytes should
+	 * be located in the first data descriptor register of the slave GW.
+	 * These bytes are the slave address byte and the internal register
+	 * address, if supplied.
+	 */
+	if (recv_bytes > 0) {
+		data32 = mlxbf_i2c_read_data(priv->smbus->io,
+					     MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+		/* Parse the received bytes. */
+		switch (recv_bytes) {
+		case 2:
+			byte = (data32 >> 8) & GENMASK(7, 0);
+			fallthrough;
+		case 1:
+			addr = (data32 & GENMASK(7, 0)) >> 1;
+		}
+
+		/* Check whether it's our slave address. */
+		if (slave->addr != addr)
+			return -EINVAL;
+	}
+
+	/*
+	 * I2C read transactions may start by a WRITE followed by a READ.
+	 * Indeed, most slave devices would expect the internal address
+	 * following the slave address byte. So, write that byte first,
+	 * and then, send the requested data bytes to the master.
+	 */
+	if (recv_bytes > 1) {
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		value = byte;
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+				      &value);
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * Now, send data to the master; currently, the driver supports
+	 * READ_BYTE, READ_WORD and BLOCK READ protocols. Note that the
+	 * hardware can send up to 128 bytes per transfer. That is the
+	 * size of its data registers.
+	 */
+	i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+	for (byte_cnt = 0; byte_cnt < desc_size; byte_cnt++) {
+		data_desc[byte_cnt] = value;
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+	}
+
+	/* Send a stop condition to the backend. */
+	i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+	/* Handle the actual transfer. */
+
+	/* Set the number of bytes to write to master. */
+	write_size = (byte_cnt - 1) & 0x7f;
+
+	/* Write data to Slave GW data descriptor. */
+	mlxbf_i2c_smbus_write_data(priv, data_desc, byte_cnt,
+				   MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+	pec_en = 0; /* Disable PEC since it is not supported. */
+
+	/* Prepare control word. */
+	control32 = MLXBF_I2C_SLAVE_ENABLE;
+	control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT);
+	control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT);
+
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_GW, control32);
+
+	/*
+	 * Wait until the transfer is completed; the driver will wait
+	 * until the GW is idle, a cause will rise on fall of GW busy.
+	 */
+	mlxbf_smbus_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);
+
+	/* Release the Slave GW. */
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	return 0;
+}
+
+/* Receive bytes from 'external' smbus master. */
+static int mlxbf_smbus_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+	u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+	struct i2c_client *slave = priv->slave;
+	u8 value, byte, addr;
+	int ret = 0;
+
+	if (!slave)
+		return -EINVAL;
+
+	/* Read data from Slave GW data descriptor. */
+	mlxbf_i2c_smbus_read_data(priv, data_desc, recv_bytes,
+				  MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+	/* Check whether its our slave address. */
+	addr = data_desc[0] >> 1;
+	if (slave->addr != addr)
+		return -EINVAL;
+
+	/*
+	 * Notify the slave backend; another I2C master wants to write data
+	 * to us. This event is sent once the slave address and the write bit
+	 * is detected.
+	 */
+	i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+	/* Send the received data to the slave backend. */
+	for (byte = 1; byte < recv_bytes; byte++) {
+		value = data_desc[byte];
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+				      &value);
+		if (ret < 0)
+			break;
+	}
+
+	/* Send a stop condition to the backend. */
+	i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+	/* Release the Slave GW. */
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	return ret;
+}
+
+static irqreturn_t mlxbf_smbus_irq(int irq, void *ptr)
+{
+	struct mlxbf_i2c_priv *priv = ptr;
+	bool read, write, irq_is_set;
+	u32 rw_bytes_reg;
+	u8 recv_bytes;
+
+	/*
+	 * Read TYU interrupt register and determine the source of the
+	 * interrupt. Based on the source of the interrupt one of the
+	 * following actions are performed:
+	 *  - Receive data and send response to master.
+	 *  - Send data and release slave GW.
+	 *
+	 * Handle read/write transaction only. CRmaster and Iarp requests
+	 * are ignored for now.
+	 */
+	irq_is_set = mlxbf_i2c_has_coalesce(priv, &read, &write);
+	if (!irq_is_set || (!read && !write)) {
+		/* Nothing to do here, interrupt was not from this device. */
+		return IRQ_NONE;
+	}
+
+	/*
+	 * The MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES includes the number of
+	 * bytes from/to master. These are defined by 8-bits each. If the lower
+	 * 8 bits are set, then the master expect to read N bytes from the
+	 * slave, if the higher 8 bits are sent then the slave expect N bytes
+	 * from the master.
+	 */
+	rw_bytes_reg = mlxbf_i2c_read(priv->smbus->io,
+				      MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+	recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0);
+
+	/*
+	 * For now, the slave supports 128 bytes transfer. Discard remaining
+	 * data bytes if the master wrote more than
+	 * MLXBF_I2C_SLAVE_DATA_DESC_SIZE, i.e, the actual size of the slave
+	 * data descriptor.
+	 *
+	 * Note that we will never expect to transfer more than 128 bytes; as
+	 * specified in the SMBus standard, block transactions cannot exceed
+	 * 32 bytes.
+	 */
+	recv_bytes = recv_bytes > MLXBF_I2C_SLAVE_DATA_DESC_SIZE ?
+		MLXBF_I2C_SLAVE_DATA_DESC_SIZE : recv_bytes;
+
+	if (read)
+		mlxbf_smbus_irq_send(priv, recv_bytes);
+	else
+		mlxbf_smbus_irq_recv(priv, recv_bytes);
+
+	return IRQ_HANDLED;
+}
+
+/* Return negative errno on error. */
+static s32 mlxbf_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	struct mlxbf_i2c_smbus_request request = { 0 };
+	struct mlxbf_i2c_priv *priv;
+	bool read, pec;
+	u8 byte_cnt;
+
+	request.slave = addr;
+
+	read = (read_write == I2C_SMBUS_READ);
+	pec = flags & I2C_FUNC_SMBUS_PEC;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		mlxbf_i2c_smbus_quick_command(&request, read);
+		dev_dbg(&adap->dev, "smbus quick, slave 0x%02x\n", addr);
+		break;
+
+	case I2C_SMBUS_BYTE:
+		mlxbf_i2c_smbus_byte_func(&request,
+					  read ? &data->byte : &command, read,
+					  pec);
+		dev_dbg(&adap->dev, "smbus %s byte, slave 0x%02x.\n",
+			read ? "read" : "write", addr);
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		mlxbf_i2c_smbus_data_byte_func(&request, &command, &data->byte,
+					       read, pec);
+		dev_dbg(&adap->dev, "smbus %s byte data at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", command, addr);
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		mlxbf_i2c_smbus_data_word_func(&request, &command,
+					       (u8 *)&data->word, read, pec);
+		dev_dbg(&adap->dev, "smbus %s word data at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", command, addr);
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		byte_cnt = data->block[0];
+		mlxbf_i2c_smbus_i2c_block_func(&request, &command, data->block,
+					       &byte_cnt, read, pec);
+		dev_dbg(&adap->dev, "i2c %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", byte_cnt, command, addr);
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		byte_cnt = read ? I2C_SMBUS_BLOCK_MAX : data->block[0];
+		mlxbf_i2c_smbus_block_func(&request, &command, data->block,
+					   &byte_cnt, read, pec);
+		dev_dbg(&adap->dev, "smbus %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", byte_cnt, command, addr);
+		break;
+
+	case I2C_FUNC_SMBUS_PROC_CALL:
+		mlxbf_i2c_smbus_process_call_func(&request, &command,
+						  (u8 *)&data->word, pec);
+		dev_dbg(&adap->dev, "process call, wr/rd at 0x%02x, slave 0x%02x.\n",
+			command, addr);
+		break;
+
+	case I2C_FUNC_SMBUS_BLOCK_PROC_CALL:
+		byte_cnt = data->block[0];
+		mlxbf_i2c_smbus_blk_process_call_func(&request, &command,
+						      data->block, &byte_cnt,
+						      pec);
+		dev_dbg(&adap->dev, "block process call, wr/rd %d bytes, slave 0x%02x.\n",
+			byte_cnt, addr);
+		break;
+
+	default:
+		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command %d\n",
+			size);
+		return -EOPNOTSUPP;
+	}
+
+	priv = i2c_get_adapdata(adap);
+
+	return mlxbf_i2c_smbus_start_transaction(priv, &request);
+}
+
+static int mlxbf_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+	int ret;
+
+	if (priv->slave)
+		return -EBUSY;
+
+	/*
+	 * Do not support ten bit chip address and do not use Packet Error
+	 * Checking (PEC).
+	 */
+	if (slave->flags & (I2C_CLIENT_TEN | I2C_CLIENT_PEC))
+		return -EAFNOSUPPORT;
+
+	ret = mlxbf_slave_enable(priv, slave->addr);
+	if (ret < 0)
+		return ret;
+
+	priv->slave = slave;
+
+	return 0;
+}
+
+static int mlxbf_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+	int ret;
+
+	WARN_ON(!priv->slave);
+
+	/* Unregister slave, i.e. disable the slave address in hardware. */
+	ret = mlxbf_slave_disable(priv);
+	if (ret < 0)
+		return ret;
+
+	priv->slave = NULL;
+
+	return 0;
+}
+
+static u32 mlxbf_i2c_functionality(struct i2c_adapter *adap)
+{
+	return MLXBF_I2C_FUNC_ALL;
+}
+
+static struct mlxbf_i2c_chip_info mlxbf_i2c_chip[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.type = MLXBF_I2C_CHIP_TYPE_1,
+		.shared_res = {
+			[0] = &mlxbf_i2c_coalesce_res[MLXBF_I2C_CHIP_TYPE_1],
+			[1] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_1],
+			[2] = &mlxbf_i2c_gpio_res[MLXBF_I2C_CHIP_TYPE_1]
+		},
+		.calculate_freq = mlxbf_calculate_freq_from_tyu
+	},
+	[MLXBF_I2C_CHIP_TYPE_2] = {
+		.type = MLXBF_I2C_CHIP_TYPE_2,
+		.shared_res = {
+			[0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_2]
+		},
+		.calculate_freq = mlxbf_calculate_freq_from_yu
+	}
+};
+
+static const struct i2c_algorithm mlxbf_i2c_algo = {
+	.smbus_xfer = mlxbf_i2c_smbus_xfer,
+	.functionality = mlxbf_i2c_functionality,
+	.reg_slave = mlxbf_i2c_reg_slave,
+	.unreg_slave = mlxbf_i2c_unreg_slave,
+};
+
+static struct i2c_adapter_quirks mlxbf_i2c_quirks = {
+	.max_read_len = MLXBF_I2C_MASTER_DATA_R_LENGTH,
+	.max_write_len = MLXBF_I2C_MASTER_DATA_W_LENGTH,
+};
+
+static const struct of_device_id mlxbf_i2c_dt_ids[] = {
+	{
+		.compatible = "mellanox,i2c-mlxbf1",
+		.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1]
+	},
+	{
+		.compatible = "mellanox,i2c-mlxbf2",
+		.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2]
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mlxbf_i2c_dt_ids);
+
+static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
+	{ "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
+	{ "MLNXBF23", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2] },
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, mlxbf_i2c_acpi_ids);
+
+static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
+{
+	const struct acpi_device_id *aid;
+	struct acpi_device *adev;
+	unsigned long bus_id = 0;
+	const char *uid;
+	int ret;
+
+	if (acpi_disabled)
+		return -ENOENT;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENXIO;
+
+	aid = acpi_match_device(mlxbf_i2c_acpi_ids, dev);
+	if (!aid)
+		return -ENODEV;
+
+	priv->chip = (struct mlxbf_i2c_chip_info *)aid->driver_data;
+
+	uid = acpi_device_uid(adev);
+	if (!uid || !(*uid)) {
+		dev_err(dev, "Cannot retrieve UID\n");
+		return -ENODEV;
+	}
+
+	ret = kstrtoul(uid, 0, &bus_id);
+	if (!ret)
+		priv->bus = bus_id;
+
+	return ret;
+}
+
+static int mlxbf_i2c_of_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
+{
+	const struct of_device_id *oid;
+	int bus_id = -1;
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		oid = of_match_node(mlxbf_i2c_dt_ids, dev->of_node);
+		if (!oid)
+			return -ENODEV;
+
+		priv->chip = oid->data;
+
+		bus_id = of_alias_get_id(dev->of_node, "i2c");
+		if (bus_id >= 0)
+			priv->bus = bus_id;
+	}
+
+	if (bus_id < 0) {
+		dev_err(dev, "Cannot get bus id");
+		return bus_id;
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mlxbf_i2c_priv *priv;
+	struct i2c_adapter *adap;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = mlxbf_i2c_acpi_probe(dev, priv);
+	if (ret < 0 && ret != -ENOENT && ret != -ENXIO)
+		ret = mlxbf_i2c_of_probe(dev, priv);
+
+	if (ret < 0)
+		return ret;
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->smbus,
+				      MLXBF_I2C_SMBUS_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch smbus resource info");
+		return ret;
+	}
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->mst_cause,
+				      MLXBF_I2C_MST_CAUSE_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch cause master resource info");
+		return ret;
+	}
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->slv_cause,
+				      MLXBF_I2C_SLV_CAUSE_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch cause slave resource info");
+		return ret;
+	}
+
+	adap = &priv->adap;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON;
+	adap->algo = &mlxbf_i2c_algo;
+	adap->quirks = &mlxbf_i2c_quirks;
+	adap->dev.parent = dev;
+	adap->dev.of_node = dev->of_node;
+	adap->nr = priv->bus;
+
+	snprintf(adap->name, sizeof(adap->name), "i2c%d", adap->nr);
+	i2c_set_adapdata(adap, priv);
+
+	/* Read Core PLL frequency. */
+	ret = mlxbf_i2c_calculate_corepll_freq(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "cannot get core clock frequency\n");
+		/* Set to default value. */
+		priv->frequency = MLXBF_I2C_COREPLL_FREQ;
+	}
+
+	/*
+	 * Initialize master.
+	 * Note that a physical bus might be shared among Linux and firmware
+	 * (e.g., ATF). Thus, the bus should be initialized and ready and
+	 * bus initialization would be unnecessary. This requires additional
+	 * knowledge about physical busses. But, since an extra initialization
+	 * does not really hurt, then keep the code as is.
+	 */
+	ret = mlxbf_i2c_init_master(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize smbus master %d",
+			priv->bus);
+		return ret;
+	}
+
+	mlxbf_i2c_init_timings(pdev, priv);
+
+	mlxbf_i2c_init_slave(pdev, priv);
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, irq, mlxbf_smbus_irq,
+			       IRQF_ONESHOT | IRQF_SHARED | IRQF_PROBE_SHARED,
+			       dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "Cannot get irq %d\n", irq);
+		return ret;
+	}
+
+	priv->irq = irq;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&mlxbf_i2c_bus_lock);
+	mlxbf_i2c_bus_count++;
+	mutex_unlock(&mlxbf_i2c_bus_lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_remove(struct platform_device *pdev)
+{
+	struct mlxbf_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+
+	params = priv->smbus->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	params = priv->mst_cause->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	params = priv->slv_cause->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	/*
+	 * Release shared resources. This should be done when releasing
+	 * the I2C controller.
+	 */
+	mutex_lock(&mlxbf_i2c_bus_lock);
+	if (--mlxbf_i2c_bus_count == 0) {
+		mlxbf_i2c_release_coalesce(pdev, priv);
+		mlxbf_i2c_release_corepll(pdev, priv);
+		mlxbf_i2c_release_gpio(pdev, priv);
+	}
+	mutex_unlock(&mlxbf_i2c_bus_lock);
+
+	devm_free_irq(dev, priv->irq, priv);
+
+	i2c_del_adapter(&priv->adap);
+
+	return 0;
+}
+
+static struct platform_driver mlxbf_i2c_driver = {
+	.probe = mlxbf_i2c_probe,
+	.remove = mlxbf_i2c_remove,
+	.driver = {
+		.name = "i2c-mlxbf",
+		.of_match_table = mlxbf_i2c_dt_ids,
+		.acpi_match_table = ACPI_PTR(mlxbf_i2c_acpi_ids),
+	},
+};
+
+static int __init mlxbf_i2c_init(void)
+{
+	mutex_init(&mlxbf_i2c_coalesce_lock);
+	mutex_init(&mlxbf_i2c_corepll_lock);
+	mutex_init(&mlxbf_i2c_gpio_lock);
+
+	mutex_init(&mlxbf_i2c_bus_lock);
+
+	return platform_driver_register(&mlxbf_i2c_driver);
+}
+module_init(mlxbf_i2c_init);
+
+static void __exit mlxbf_i2c_exit(void)
+{
+	platform_driver_unregister(&mlxbf_i2c_driver);
+
+	mutex_destroy(&mlxbf_i2c_bus_lock);
+
+	mutex_destroy(&mlxbf_i2c_gpio_lock);
+	mutex_destroy(&mlxbf_i2c_corepll_lock);
+	mutex_destroy(&mlxbf_i2c_coalesce_lock);
+}
+module_exit(mlxbf_i2c_exit);
+
+MODULE_DESCRIPTION("Mellanox BlueField I2C bus driver");
+MODULE_AUTHOR("Khalil Blaiech <kblaiech@mellanox.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 8d9d4ffdcd24..e0e45fc19b8f 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -496,11 +496,10 @@ static irqreturn_t
 mv64xxx_i2c_intr(int irq, void *dev_id)
 {
 	struct mv64xxx_i2c_data	*drv_data = dev_id;
-	unsigned long	flags;
 	u32		status;
 	irqreturn_t	rc = IRQ_NONE;
 
-	spin_lock_irqsave(&drv_data->lock, flags);
+	spin_lock(&drv_data->lock);
 
 	if (drv_data->offload_enabled)
 		rc = mv64xxx_i2c_intr_offload(drv_data);
@@ -517,7 +516,7 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 
 		rc = IRQ_HANDLED;
 	}
-	spin_unlock_irqrestore(&drv_data->lock, flags);
+	spin_unlock(&drv_data->lock);
 
 	return rc;
 }
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
index f480105000b8..f9a69b109e5c 100644
--- a/drivers/i2c/busses/i2c-nvidia-gpu.c
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -125,8 +125,7 @@ static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
 		put_unaligned_be16(val, data);
 		break;
 	case 3:
-		put_unaligned_be16(val >> 8, data);
-		data[2] = val;
+		put_unaligned_be24(val, data);
 		break;
 	case 4:
 		put_unaligned_be32(val, data);
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index a163b8f308c1..9918b2a0b909 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -165,10 +165,9 @@ static irqreturn_t owl_i2c_interrupt(int irq, void *_dev)
 {
 	struct owl_i2c_dev *i2c_dev = _dev;
 	struct i2c_msg *msg = i2c_dev->msg;
-	unsigned long flags;
 	unsigned int stat, fifostat;
 
-	spin_lock_irqsave(&i2c_dev->lock, flags);
+	spin_lock(&i2c_dev->lock);
 
 	i2c_dev->err = 0;
 
@@ -214,7 +213,7 @@ stop:
 			   OWL_I2C_STAT_IRQP, true);
 
 	complete_all(&i2c_dev->msg_complete);
-	spin_unlock_irqrestore(&i2c_dev->lock, flags);
+	spin_unlock(&i2c_dev->lock);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index dead5db3315a..8b4c35f47a70 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -210,9 +210,8 @@ static irqreturn_t geni_i2c_irq(int irq, void *dev)
 	u32 dma;
 	u32 val;
 	struct i2c_msg *cur;
-	unsigned long flags;
 
-	spin_lock_irqsave(&gi2c->lock, flags);
+	spin_lock(&gi2c->lock);
 	m_stat = readl_relaxed(base + SE_GENI_M_IRQ_STATUS);
 	rx_st = readl_relaxed(base + SE_GENI_RX_FIFO_STATUS);
 	dm_tx_st = readl_relaxed(base + SE_DMA_TX_IRQ_STAT);
@@ -294,7 +293,7 @@ static irqreturn_t geni_i2c_irq(int irq, void *dev)
 	    dm_rx_st & RX_DMA_DONE || dm_rx_st & RX_RESET_DONE)
 		complete(&gi2c->done);
 
-	spin_unlock_irqrestore(&gi2c->lock, flags);
+	spin_unlock(&gi2c->lock);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index c7c543483b08..217def2d7cb4 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -19,7 +19,9 @@
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
@@ -105,10 +107,11 @@
 #define ID_ARBLOST	(1 << 3)
 #define ID_NACK		(1 << 4)
 /* persistent flags */
+#define ID_P_HOST_NOTIFY	BIT(28)
 #define ID_P_REP_AFTER_RD	BIT(29)
 #define ID_P_NO_RXDMA		BIT(30) /* HW forbids RXDMA sometimes */
 #define ID_P_PM_BLOCKED		BIT(31)
-#define ID_P_MASK		GENMASK(31, 29)
+#define ID_P_MASK		GENMASK(31, 28)
 
 enum rcar_i2c_type {
 	I2C_RCAR_GEN1,
@@ -140,14 +143,13 @@ struct rcar_i2c_priv {
 
 	struct reset_control *rstc;
 	int irq;
+
+	struct i2c_client *host_notify_client;
 };
 
 #define rcar_i2c_priv_to_dev(p)		((p)->adap.dev.parent)
 #define rcar_i2c_is_recv(p)		((p)->msg->flags & I2C_M_RD)
 
-#define LOOP_TIMEOUT	1024
-
-
 static void rcar_i2c_write(struct rcar_i2c_priv *priv, int reg, u32 val)
 {
 	writel(val, priv->io + reg);
@@ -221,18 +223,18 @@ static void rcar_i2c_init(struct rcar_i2c_priv *priv)
 
 static int rcar_i2c_bus_barrier(struct rcar_i2c_priv *priv)
 {
-	int i;
+	int ret;
+	u32 val;
 
-	for (i = 0; i < LOOP_TIMEOUT; i++) {
-		/* make sure that bus is not busy */
-		if (!(rcar_i2c_read(priv, ICMCR) & FSDA))
-			return 0;
-		udelay(1);
+	ret = readl_poll_timeout(priv->io + ICMCR, val, !(val & FSDA), 10,
+				 priv->adap.timeout);
+	if (ret) {
+		/* Waiting did not help, try to recover */
+		priv->recovery_icmcr = MDBS | OBPC | FSDA | FSCL;
+		ret = i2c_recover_bus(&priv->adap);
 	}
 
-	/* Waiting did not help, try to recover */
-	priv->recovery_icmcr = MDBS | OBPC | FSDA | FSCL;
-	return i2c_recover_bus(&priv->adap);
+	return ret;
 }
 
 static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
@@ -760,20 +762,14 @@ static void rcar_i2c_release_dma(struct rcar_i2c_priv *priv)
 /* I2C is a special case, we need to poll the status of a reset */
 static int rcar_i2c_do_reset(struct rcar_i2c_priv *priv)
 {
-	int i, ret;
+	int ret;
 
 	ret = reset_control_reset(priv->rstc);
 	if (ret)
 		return ret;
 
-	for (i = 0; i < LOOP_TIMEOUT; i++) {
-		ret = reset_control_status(priv->rstc);
-		if (ret == 0)
-			return 0;
-		udelay(1);
-	}
-
-	return -ETIMEDOUT;
+	return read_poll_timeout_atomic(reset_control_status, ret, ret == 0, 1,
+					100, false, priv->rstc);
 }
 
 static int rcar_i2c_master_xfer(struct i2c_adapter *adap,
@@ -884,14 +880,21 @@ static int rcar_unreg_slave(struct i2c_client *slave)
 
 static u32 rcar_i2c_func(struct i2c_adapter *adap)
 {
+	struct rcar_i2c_priv *priv = i2c_get_adapdata(adap);
+
 	/*
 	 * This HW can't do:
 	 * I2C_SMBUS_QUICK (setting FSB during START didn't work)
 	 * I2C_M_NOSTART (automatically sends address after START)
 	 * I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
 	 */
-	return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
-		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_SLAVE |
+		   (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+
+	if (priv->flags & ID_P_HOST_NOTIFY)
+		func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+	return func;
 }
 
 static const struct i2c_algorithm rcar_i2c_algo = {
@@ -991,6 +994,8 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	else
 		pm_runtime_put(dev);
 
+	if (of_property_read_bool(dev->of_node, "smbus"))
+		priv->flags |= ID_P_HOST_NOTIFY;
 
 	priv->irq = platform_get_irq(pdev, 0);
 	ret = devm_request_irq(dev, priv->irq, rcar_i2c_irq, 0, dev_name(dev), priv);
@@ -1005,10 +1010,20 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto out_pm_disable;
 
+	if (priv->flags & ID_P_HOST_NOTIFY) {
+		priv->host_notify_client = i2c_new_slave_host_notify_device(adap);
+		if (IS_ERR(priv->host_notify_client)) {
+			ret = PTR_ERR(priv->host_notify_client);
+			goto out_del_device;
+		}
+	}
+
 	dev_info(dev, "probed\n");
 
 	return 0;
 
+ out_del_device:
+	i2c_del_adapter(&priv->adap);
  out_pm_put:
 	pm_runtime_put(dev);
  out_pm_disable:
@@ -1021,6 +1036,8 @@ static int rcar_i2c_remove(struct platform_device *pdev)
 	struct rcar_i2c_priv *priv = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
 
+	if (priv->host_notify_client)
+		i2c_free_slave_host_notify_device(priv->host_notify_client);
 	i2c_del_adapter(&priv->adap);
 	rcar_i2c_release_dma(priv);
 	if (priv->flags & ID_P_PM_BLOCKED)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 8e3cc85d1921..819ab4ee517e 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -1312,18 +1312,13 @@ static int rk3x_i2c_probe(struct platform_device *pdev)
 		i2c->pclk = devm_clk_get(&pdev->dev, "pclk");
 	}
 
-	if (IS_ERR(i2c->clk)) {
-		ret = PTR_ERR(i2c->clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Can't get bus clk: %d\n", ret);
-		return ret;
-	}
-	if (IS_ERR(i2c->pclk)) {
-		ret = PTR_ERR(i2c->pclk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Can't get periph clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(i2c->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
+				     "Can't get bus clk\n");
+
+	if (IS_ERR(i2c->pclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk),
+				     "Can't get periph clk\n");
 
 	ret = clk_prepare(i2c->clk);
 	if (ret < 0) {
diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
index 3f69a3bb6119..157c64e27d0b 100644
--- a/drivers/i2c/busses/i2c-stm32.c
+++ b/drivers/i2c/busses/i2c-stm32.c
@@ -26,8 +26,9 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
 		ret = PTR_ERR(dma->chan_tx);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "can't request DMA tx channel\n");
+		if (ret != -ENODEV)
+			ret = dev_err_probe(dev, ret,
+					    "can't request DMA tx channel\n");
 		goto fail_al;
 	}
 
@@ -46,8 +47,9 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
 	dma->chan_rx = dma_request_chan(dev, "rx");
 	if (IS_ERR(dma->chan_rx)) {
 		ret = PTR_ERR(dma->chan_rx);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "can't request DMA rx channel\n");
+		if (ret != -ENODEV)
+			ret = dev_err_probe(dev, ret,
+					    "can't request DMA rx channel\n");
 
 		goto fail_tx;
 	}
@@ -76,8 +78,6 @@ fail_tx:
 	dma_release_channel(dma->chan_tx);
 fail_al:
 	devm_kfree(dev, dma);
-	if (ret != -EPROBE_DEFER)
-		dev_info(dev, "can't use DMA\n");
 
 	return ERR_PTR(ret);
 }
diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
index 48e269284369..937c2c8fd349 100644
--- a/drivers/i2c/busses/i2c-stm32f4.c
+++ b/drivers/i2c/busses/i2c-stm32f4.c
@@ -797,10 +797,8 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		ret = PTR_ERR(rst);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
-
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				    "Error: Missing reset ctrl\n");
 		goto clk_free;
 	}
 	reset_control_assert(rst);
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index bff3479fe122..f41f51a176a1 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
@@ -50,6 +51,7 @@
 
 /* STM32F7 I2C control 1 */
 #define STM32F7_I2C_CR1_PECEN			BIT(23)
+#define STM32F7_I2C_CR1_SMBHEN			BIT(20)
 #define STM32F7_I2C_CR1_WUPEN			BIT(18)
 #define STM32F7_I2C_CR1_SBC			BIT(16)
 #define STM32F7_I2C_CR1_RXDMAEN			BIT(15)
@@ -150,7 +152,12 @@
 
 #define STM32F7_I2C_MAX_LEN			0xff
 #define STM32F7_I2C_DMA_LEN_MIN			0x16
-#define STM32F7_I2C_MAX_SLAVE			0x2
+enum {
+	STM32F7_SLAVE_HOSTNOTIFY,
+	STM32F7_SLAVE_7_10_BITS_ADDR,
+	STM32F7_SLAVE_7_BITS_ADDR,
+	STM32F7_I2C_MAX_SLAVE
+};
 
 #define STM32F7_I2C_DNF_DEFAULT			0
 #define STM32F7_I2C_DNF_MAX			16
@@ -301,6 +308,8 @@ struct stm32f7_i2c_msg {
  * @fmp_creg: register address for clearing Fast Mode Plus bits
  * @fmp_mask: mask for Fast Mode Plus bits in set register
  * @wakeup_src: boolean to know if the device is a wakeup source
+ * @smbus_mode: states that the controller is configured in SMBus mode
+ * @host_notify_client: SMBus host-notify client
  */
 struct stm32f7_i2c_dev {
 	struct i2c_adapter adap;
@@ -327,6 +336,8 @@ struct stm32f7_i2c_dev {
 	u32 fmp_creg;
 	u32 fmp_mask;
 	bool wakeup_src;
+	bool smbus_mode;
+	struct i2c_client *host_notify_client;
 };
 
 /*
@@ -1321,11 +1332,20 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 	int i;
 
 	/*
-	 * slave[0] supports 7-bit and 10-bit slave address
-	 * slave[1] supports 7-bit slave address only
+	 * slave[STM32F7_SLAVE_HOSTNOTIFY] support only SMBus Host address (0x8)
+	 * slave[STM32F7_SLAVE_7_10_BITS_ADDR] supports 7-bit and 10-bit slave address
+	 * slave[STM32F7_SLAVE_7_BITS_ADDR] supports 7-bit slave address only
 	 */
-	for (i = STM32F7_I2C_MAX_SLAVE - 1; i >= 0; i--) {
-		if (i == 1 && (slave->flags & I2C_CLIENT_TEN))
+	if (i2c_dev->smbus_mode && (slave->addr == 0x08)) {
+		if (i2c_dev->slave[STM32F7_SLAVE_HOSTNOTIFY])
+			goto fail;
+		*id = STM32F7_SLAVE_HOSTNOTIFY;
+		return 0;
+	}
+
+	for (i = STM32F7_I2C_MAX_SLAVE - 1; i > STM32F7_SLAVE_HOSTNOTIFY; i--) {
+		if ((i == STM32F7_SLAVE_7_BITS_ADDR) &&
+		    (slave->flags & I2C_CLIENT_TEN))
 			continue;
 		if (!i2c_dev->slave[i]) {
 			*id = i;
@@ -1333,6 +1353,7 @@ static int stm32f7_i2c_get_free_slave_id(struct stm32f7_i2c_dev *i2c_dev,
 		}
 	}
 
+fail:
 	dev_err(dev, "Slave 0x%x could not be registered\n", slave->addr);
 
 	return -EINVAL;
@@ -1776,7 +1797,13 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 	if (!stm32f7_i2c_is_slave_registered(i2c_dev))
 		stm32f7_i2c_enable_wakeup(i2c_dev, true);
 
-	if (id == 0) {
+	switch (id) {
+	case 0:
+		/* Slave SMBus Host */
+		i2c_dev->slave[id] = slave;
+		break;
+
+	case 1:
 		/* Configure Own Address 1 */
 		oar1 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR1);
 		oar1 &= ~STM32F7_I2C_OAR1_MASK;
@@ -1789,7 +1816,9 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar1 |= STM32F7_I2C_OAR1_OA1EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar1, i2c_dev->base + STM32F7_I2C_OAR1);
-	} else if (id == 1) {
+		break;
+
+	case 2:
 		/* Configure Own Address 2 */
 		oar2 = readl_relaxed(i2c_dev->base + STM32F7_I2C_OAR2);
 		oar2 &= ~STM32F7_I2C_OAR2_MASK;
@@ -1802,7 +1831,10 @@ static int stm32f7_i2c_reg_slave(struct i2c_client *slave)
 		oar2 |= STM32F7_I2C_OAR2_OA2EN;
 		i2c_dev->slave[id] = slave;
 		writel_relaxed(oar2, i2c_dev->base + STM32F7_I2C_OAR2);
-	} else {
+		break;
+
+	default:
+		dev_err(dev, "I2C slave id not supported\n");
 		ret = -ENODEV;
 		goto pm_free;
 	}
@@ -1843,10 +1875,10 @@ static int stm32f7_i2c_unreg_slave(struct i2c_client *slave)
 	if (ret < 0)
 		return ret;
 
-	if (id == 0) {
+	if (id == 1) {
 		mask = STM32F7_I2C_OAR1_OA1EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR1, mask);
-	} else {
+	} else if (id == 2) {
 		mask = STM32F7_I2C_OAR2_OA2EN;
 		stm32f7_i2c_clr_bits(base + STM32F7_I2C_OAR2, mask);
 	}
@@ -1911,14 +1943,51 @@ static int stm32f7_i2c_setup_fm_plus_bits(struct platform_device *pdev,
 					  &i2c_dev->fmp_mask);
 }
 
+static int stm32f7_i2c_enable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	struct i2c_adapter *adap = &i2c_dev->adap;
+	void __iomem *base = i2c_dev->base;
+	struct i2c_client *client;
+
+	client = i2c_new_slave_host_notify_device(adap);
+	if (IS_ERR(client))
+		return PTR_ERR(client);
+
+	i2c_dev->host_notify_client = client;
+
+	/* Enable SMBus Host address */
+	stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_SMBHEN);
+
+	return 0;
+}
+
+static void stm32f7_i2c_disable_smbus_host(struct stm32f7_i2c_dev *i2c_dev)
+{
+	void __iomem *base = i2c_dev->base;
+
+	if (i2c_dev->host_notify_client) {
+		/* Disable SMBus Host address */
+		stm32f7_i2c_clr_bits(base + STM32F7_I2C_CR1,
+				     STM32F7_I2C_CR1_SMBHEN);
+		i2c_free_slave_host_notify_device(i2c_dev->host_notify_client);
+	}
+}
+
 static u32 stm32f7_i2c_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
-		I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
-		I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
-		I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
-		I2C_FUNC_SMBUS_I2C_BLOCK;
+	struct stm32f7_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+
+	u32 func = I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SLAVE |
+		   I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		   I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+		   I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+		   I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_PEC |
+		   I2C_FUNC_SMBUS_I2C_BLOCK;
+
+	if (i2c_dev->smbus_mode)
+		func |= I2C_FUNC_SMBUS_HOST_NOTIFY;
+
+	return func;
 }
 
 static const struct i2c_algorithm stm32f7_i2c_algo = {
@@ -1968,11 +2037,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 						    "wakeup-source");
 
 	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(i2c_dev->clk)) {
-		if (PTR_ERR(i2c_dev->clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to get controller clock\n");
-		return PTR_ERR(i2c_dev->clk);
-	}
+	if (IS_ERR(i2c_dev->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
+				     "Failed to get controller clock\n");
 
 	ret = clk_prepare_enable(i2c_dev->clk);
 	if (ret) {
@@ -1982,10 +2049,8 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(rst)) {
-		ret = PTR_ERR(rst);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Error: Missing reset ctrl\n");
-
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				    "Error: Missing reset ctrl\n");
 		goto clk_free;
 	}
 	reset_control_assert(rst);
@@ -2052,14 +2117,13 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
 					     STM32F7_I2C_TXDR,
 					     STM32F7_I2C_RXDR);
-	if (PTR_ERR(i2c_dev->dma) == -ENODEV)
-		i2c_dev->dma = NULL;
-	else if (IS_ERR(i2c_dev->dma)) {
+	if (IS_ERR(i2c_dev->dma)) {
 		ret = PTR_ERR(i2c_dev->dma);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Failed to request dma error %i\n", ret);
-		goto fmp_clear;
+		/* DMA support is optional, only report other errors */
+		if (ret != -ENODEV)
+			goto fmp_clear;
+		dev_dbg(i2c_dev->dev, "No DMA option: fallback using interrupts\n");
+		i2c_dev->dma = NULL;
 	}
 
 	if (i2c_dev->wakeup_src) {
@@ -2084,10 +2148,22 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	stm32f7_i2c_hw_config(i2c_dev);
 
+	i2c_dev->smbus_mode = of_property_read_bool(pdev->dev.of_node, "smbus");
+
 	ret = i2c_add_adapter(adap);
 	if (ret)
 		goto pm_disable;
 
+	if (i2c_dev->smbus_mode) {
+		ret = stm32f7_i2c_enable_smbus_host(i2c_dev);
+		if (ret) {
+			dev_err(i2c_dev->dev,
+				"failed to enable SMBus Host-Notify protocol (%d)\n",
+				ret);
+			goto i2c_adapter_remove;
+		}
+	}
+
 	dev_info(i2c_dev->dev, "STM32F7 I2C-%d bus adapter\n", adap->nr);
 
 	pm_runtime_mark_last_busy(i2c_dev->dev);
@@ -2095,6 +2171,9 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 
 	return 0;
 
+i2c_adapter_remove:
+	i2c_del_adapter(adap);
+
 pm_disable:
 	pm_runtime_put_noidle(i2c_dev->dev);
 	pm_runtime_disable(i2c_dev->dev);
@@ -2126,6 +2205,8 @@ static int stm32f7_i2c_remove(struct platform_device *pdev)
 {
 	struct stm32f7_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
+	stm32f7_i2c_disable_smbus_host(i2c_dev);
+
 	i2c_del_adapter(&i2c_dev->adap);
 	pm_runtime_get_sync(i2c_dev->dev);
 
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 00d3e4d7a01e..6f08c0c3238d 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -136,7 +136,7 @@
 /* configuration load timeout in microseconds */
 #define I2C_CONFIG_LOAD_TIMEOUT			1000000
 
-/* Packet header size in bytes */
+/* packet header size in bytes */
 #define I2C_PACKET_HEADER_SIZE			12
 
 /*
@@ -148,11 +148,10 @@
 #define I2C_PIO_MODE_PREFERRED_LEN		32
 
 /*
- * msg_end_type: The bus control which need to be send at end of transfer.
- * @MSG_END_STOP: Send stop pulse at end of transfer.
- * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
- * @MSG_END_CONTINUE: The following on message is coming and so do not send
- *		stop or repeat start.
+ * msg_end_type: The bus control which needs to be sent at end of transfer.
+ * @MSG_END_STOP: Send stop pulse.
+ * @MSG_END_REPEAT_START: Send repeat-start.
+ * @MSG_END_CONTINUE: Don't send stop or repeat-start.
  */
 enum msg_end_type {
 	MSG_END_STOP,
@@ -161,13 +160,10 @@ enum msg_end_type {
 };
 
 /**
- * struct tegra_i2c_hw_feature : Different HW support on Tegra
- * @has_continue_xfer_support: Continue transfer supports.
+ * struct tegra_i2c_hw_feature : per hardware generation features
+ * @has_continue_xfer_support: continue-transfer supported
  * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer
- *		complete interrupt per packet basis.
- * @has_single_clk_source: The I2C controller has single clock source. Tegra30
- *		and earlier SoCs have two clock sources i.e. div-clk and
- *		fast-clk.
+ *		completion interrupt on per packet basis.
  * @has_config_load_reg: Has the config load register to load the new
  *		configuration.
  * @clk_divisor_hs_mode: Clock divisor in HS mode.
@@ -187,7 +183,7 @@ enum msg_end_type {
  * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that
  *		provides additional features and allows for longer messages to
  *		be transferred in one go.
- * @quirks: i2c adapter quirks for limiting write/read transfer size and not
+ * @quirks: I2C adapter quirks for limiting write/read transfer size and not
  *		allowing 0 length transfers.
  * @supports_bus_clear: Bus Clear support to recover from bus hang during
  *		SDA stuck low from device for some unknown reasons.
@@ -208,22 +204,21 @@ enum msg_end_type {
 struct tegra_i2c_hw_feature {
 	bool has_continue_xfer_support;
 	bool has_per_pkt_xfer_complete_irq;
-	bool has_single_clk_source;
 	bool has_config_load_reg;
-	int clk_divisor_hs_mode;
-	int clk_divisor_std_mode;
-	int clk_divisor_fast_mode;
-	u16 clk_divisor_fast_plus_mode;
+	u32 clk_divisor_hs_mode;
+	u32 clk_divisor_std_mode;
+	u32 clk_divisor_fast_mode;
+	u32 clk_divisor_fast_plus_mode;
 	bool has_multi_master_mode;
 	bool has_slcg_override_reg;
 	bool has_mst_fifo;
 	const struct i2c_adapter_quirks *quirks;
 	bool supports_bus_clear;
 	bool has_apb_dma;
-	u8 tlow_std_mode;
-	u8 thigh_std_mode;
-	u8 tlow_fast_fastplus_mode;
-	u8 thigh_fast_fastplus_mode;
+	u32 tlow_std_mode;
+	u32 thigh_std_mode;
+	u32 tlow_fast_fastplus_mode;
+	u32 thigh_fast_fastplus_mode;
 	u32 setup_hold_time_std_mode;
 	u32 setup_hold_time_fast_fast_plus_mode;
 	u32 setup_hold_time_hs_mode;
@@ -236,7 +231,8 @@ struct tegra_i2c_hw_feature {
  * @hw: Tegra I2C HW feature
  * @adapter: core I2C layer adapter information
  * @div_clk: clock reference for div clock of I2C controller
- * @fast_clk: clock reference for fast clock of I2C controller
+ * @clocks: array of I2C controller clocks
+ * @nclocks: number of clocks in the array
  * @rst: reset control for the I2C controller
  * @base: ioremapped registers cookie
  * @base_phys: physical base address of the I2C controller
@@ -248,101 +244,103 @@ struct tegra_i2c_hw_feature {
  * @msg_err: error code for completed message
  * @msg_buf: pointer to current message data
  * @msg_buf_remaining: size of unsent data in the message buffer
- * @msg_read: identifies read transfers
+ * @msg_read: indicates that the transfer is a read access
  * @bus_clk_rate: current I2C bus clock rate
- * @clk_divisor_non_hs_mode: clock divider for non-high-speed modes
- * @is_multimaster_mode: track if I2C controller is in multi-master mode
+ * @multimaster_mode: indicates that I2C controller is in multi-master mode
  * @tx_dma_chan: DMA transmit channel
  * @rx_dma_chan: DMA receive channel
  * @dma_phys: handle to DMA resources
  * @dma_buf: pointer to allocated DMA buffer
  * @dma_buf_size: DMA buffer size
- * @is_curr_dma_xfer: indicates active DMA transfer
+ * @dma_mode: indicates active DMA transfer
  * @dma_complete: DMA completion notifier
- * @is_curr_atomic_xfer: indicates active atomic transfer
+ * @atomic_mode: indicates active atomic transfer
  */
 struct tegra_i2c_dev {
 	struct device *dev;
-	const struct tegra_i2c_hw_feature *hw;
 	struct i2c_adapter adapter;
-	struct clk *div_clk;
-	struct clk *fast_clk;
-	struct clk *slow_clk;
+
+	const struct tegra_i2c_hw_feature *hw;
 	struct reset_control *rst;
-	void __iomem *base;
+	unsigned int cont_id;
+	unsigned int irq;
+
 	phys_addr_t base_phys;
-	int cont_id;
-	int irq;
-	int is_dvc;
-	bool is_vi;
+	void __iomem *base;
+
+	struct clk_bulk_data clocks[2];
+	unsigned int nclocks;
+
+	struct clk *div_clk;
+	u32 bus_clk_rate;
+
 	struct completion msg_complete;
+	size_t msg_buf_remaining;
 	int msg_err;
 	u8 *msg_buf;
-	size_t msg_buf_remaining;
-	int msg_read;
-	u32 bus_clk_rate;
-	u16 clk_divisor_non_hs_mode;
-	bool is_multimaster_mode;
+
+	struct completion dma_complete;
 	struct dma_chan *tx_dma_chan;
 	struct dma_chan *rx_dma_chan;
-	dma_addr_t dma_phys;
-	u32 *dma_buf;
 	unsigned int dma_buf_size;
-	bool is_curr_dma_xfer;
-	struct completion dma_complete;
-	bool is_curr_atomic_xfer;
-};
+	dma_addr_t dma_phys;
+	void *dma_buf;
 
-static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit);
+	bool multimaster_mode;
+	bool atomic_mode;
+	bool dma_mode;
+	bool msg_read;
+	bool is_dvc;
+	bool is_vi;
+};
 
 static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
-		       unsigned long reg)
+		       unsigned int reg)
 {
 	writel_relaxed(val, i2c_dev->base + reg);
 }
 
-static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
+static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
 {
 	return readl_relaxed(i2c_dev->base + reg);
 }
 
 /*
- * i2c_writel and i2c_readl will offset the register if necessary to talk
- * to the I2C block inside the DVC block
+ * If necessary, i2c_writel() and i2c_readl() will offset the register
+ * in order to talk to the I2C block inside the DVC block.
  */
-static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
-					unsigned long reg)
+static u32 tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
 {
 	if (i2c_dev->is_dvc)
 		reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
 	else if (i2c_dev->is_vi)
 		reg = 0xc00 + (reg << 2);
+
 	return reg;
 }
 
-static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
-		       unsigned long reg)
+static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
 {
 	writel_relaxed(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
 
-	/* Read back register to make sure that register writes completed */
+	/* read back register to make sure that register writes completed */
 	if (reg != I2C_TX_FIFO)
 		readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
 }
 
-static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
+static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
 {
 	return readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
 }
 
 static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
-			unsigned long reg, int len)
+			unsigned int reg, unsigned int len)
 {
 	writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
 }
 
 static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
-		       unsigned long reg, int len)
+		       unsigned int reg, unsigned int len)
 {
 	readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
 }
@@ -377,21 +375,27 @@ static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
 	struct dma_chan *chan;
 
 	dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
+
 	reinit_completion(&i2c_dev->dma_complete);
+
 	dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
 	chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
+
 	dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys,
 					       len, dir, DMA_PREP_INTERRUPT |
 					       DMA_CTRL_ACK);
 	if (!dma_desc) {
-		dev_err(i2c_dev->dev, "failed to get DMA descriptor\n");
+		dev_err(i2c_dev->dev, "failed to get %s DMA descriptor\n",
+			i2c_dev->msg_read ? "RX" : "TX");
 		return -EINVAL;
 	}
 
 	dma_desc->callback = tegra_i2c_dma_complete;
 	dma_desc->callback_param = i2c_dev;
+
 	dmaengine_submit(dma_desc);
 	dma_async_issue_pending(chan);
+
 	return 0;
 }
 
@@ -417,15 +421,15 @@ static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev)
 static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 {
 	struct dma_chan *chan;
-	u32 *dma_buf;
 	dma_addr_t dma_phys;
+	u32 *dma_buf;
 	int err;
 
 	if (!i2c_dev->hw->has_apb_dma || i2c_dev->is_vi)
 		return 0;
 
 	if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
-		dev_dbg(i2c_dev->dev, "Support for APB DMA not enabled!\n");
+		dev_dbg(i2c_dev->dev, "DMA support not enabled\n");
 		return 0;
 	}
 
@@ -445,16 +449,20 @@ static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
 
 	i2c_dev->tx_dma_chan = chan;
 
+	i2c_dev->dma_buf_size = i2c_dev->hw->quirks->max_write_len +
+				I2C_PACKET_HEADER_SIZE;
+
 	dma_buf = dma_alloc_coherent(i2c_dev->dev, i2c_dev->dma_buf_size,
 				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
 	if (!dma_buf) {
-		dev_err(i2c_dev->dev, "failed to allocate the DMA buffer\n");
+		dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n");
 		err = -ENOMEM;
 		goto err_out;
 	}
 
 	i2c_dev->dma_buf = dma_buf;
 	i2c_dev->dma_phys = dma_phys;
+
 	return 0;
 
 err_out:
@@ -468,171 +476,12 @@ err_out:
 	return err;
 }
 
-static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
-{
-	unsigned long timeout = jiffies + HZ;
-	unsigned int offset;
-	u32 mask, val;
-
-	if (i2c_dev->hw->has_mst_fifo) {
-		mask = I2C_MST_FIFO_CONTROL_TX_FLUSH |
-		       I2C_MST_FIFO_CONTROL_RX_FLUSH;
-		offset = I2C_MST_FIFO_CONTROL;
-	} else {
-		mask = I2C_FIFO_CONTROL_TX_FLUSH |
-		       I2C_FIFO_CONTROL_RX_FLUSH;
-		offset = I2C_FIFO_CONTROL;
-	}
-
-	val = i2c_readl(i2c_dev, offset);
-	val |= mask;
-	i2c_writel(i2c_dev, val, offset);
-
-	while (i2c_readl(i2c_dev, offset) & mask) {
-		if (time_after(jiffies, timeout)) {
-			dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n");
-			return -ETIMEDOUT;
-		}
-		usleep_range(1000, 2000);
-	}
-	return 0;
-}
-
-static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
-{
-	u32 val;
-	int rx_fifo_avail;
-	u8 *buf = i2c_dev->msg_buf;
-	size_t buf_remaining = i2c_dev->msg_buf_remaining;
-	int words_to_transfer;
-
-	/*
-	 * Catch overflow due to message fully sent
-	 * before the check for RX FIFO availability.
-	 */
-	if (WARN_ON_ONCE(!(i2c_dev->msg_buf_remaining)))
-		return -EINVAL;
-
-	if (i2c_dev->hw->has_mst_fifo) {
-		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
-		rx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_RX, val);
-	} else {
-		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
-		rx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_RX, val);
-	}
-
-	/* Rounds down to not include partial word at the end of buf */
-	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
-	if (words_to_transfer > rx_fifo_avail)
-		words_to_transfer = rx_fifo_avail;
-
-	i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer);
-
-	buf += words_to_transfer * BYTES_PER_FIFO_WORD;
-	buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
-	rx_fifo_avail -= words_to_transfer;
-
-	/*
-	 * If there is a partial word at the end of buf, handle it manually to
-	 * prevent overwriting past the end of buf
-	 */
-	if (rx_fifo_avail > 0 && buf_remaining > 0) {
-		/*
-		 * buf_remaining > 3 check not needed as rx_fifo_avail == 0
-		 * when (words_to_transfer was > rx_fifo_avail) earlier
-		 * in this function.
-		 */
-		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
-		val = cpu_to_le32(val);
-		memcpy(buf, &val, buf_remaining);
-		buf_remaining = 0;
-		rx_fifo_avail--;
-	}
-
-	/* RX FIFO must be drained, otherwise it's an Overflow case. */
-	if (WARN_ON_ONCE(rx_fifo_avail))
-		return -EINVAL;
-
-	i2c_dev->msg_buf_remaining = buf_remaining;
-	i2c_dev->msg_buf = buf;
-
-	return 0;
-}
-
-static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
-{
-	u32 val;
-	int tx_fifo_avail;
-	u8 *buf = i2c_dev->msg_buf;
-	size_t buf_remaining = i2c_dev->msg_buf_remaining;
-	int words_to_transfer;
-
-	if (i2c_dev->hw->has_mst_fifo) {
-		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
-		tx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_TX, val);
-	} else {
-		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
-		tx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_TX, val);
-	}
-
-	/* Rounds down to not include partial word at the end of buf */
-	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
-
-	/* It's very common to have < 4 bytes, so optimize that case. */
-	if (words_to_transfer) {
-		if (words_to_transfer > tx_fifo_avail)
-			words_to_transfer = tx_fifo_avail;
-
-		/*
-		 * Update state before writing to FIFO.  If this casues us
-		 * to finish writing all bytes (AKA buf_remaining goes to 0) we
-		 * have a potential for an interrupt (PACKET_XFER_COMPLETE is
-		 * not maskable).  We need to make sure that the isr sees
-		 * buf_remaining as 0 and doesn't call us back re-entrantly.
-		 */
-		buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
-		tx_fifo_avail -= words_to_transfer;
-		i2c_dev->msg_buf_remaining = buf_remaining;
-		i2c_dev->msg_buf = buf +
-			words_to_transfer * BYTES_PER_FIFO_WORD;
-		barrier();
-
-		i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
-
-		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
-	}
-
-	/*
-	 * If there is a partial word at the end of buf, handle it manually to
-	 * prevent reading past the end of buf, which could cross a page
-	 * boundary and fault.
-	 */
-	if (tx_fifo_avail > 0 && buf_remaining > 0) {
-		/*
-		 * buf_remaining > 3 check not needed as tx_fifo_avail == 0
-		 * when (words_to_transfer was > tx_fifo_avail) earlier
-		 * in this function for non-zero words_to_transfer.
-		 */
-		memcpy(&val, buf, buf_remaining);
-		val = le32_to_cpu(val);
-
-		/* Again update before writing to FIFO to make sure isr sees. */
-		i2c_dev->msg_buf_remaining = 0;
-		i2c_dev->msg_buf = NULL;
-		barrier();
-
-		i2c_writel(i2c_dev, val, I2C_TX_FIFO);
-	}
-
-	return 0;
-}
-
 /*
  * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
  * block.  This block is identical to the rest of the I2C blocks, except that
  * it only supports master mode, it has registers moved around, and it needs
  * some extra init to get it into I2C mode.  The register moves are handled
- * by i2c_readl and i2c_writel
+ * by i2c_readl() and i2c_writel().
  */
 static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 {
@@ -648,140 +497,112 @@ static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
 	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
 }
 
-static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
+static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
 {
-	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-	int ret;
-
-	ret = pinctrl_pm_select_default_state(i2c_dev->dev);
-	if (ret)
-		return ret;
+	u32 value;
 
-	ret = clk_enable(i2c_dev->fast_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling fast clk failed, err %d\n", ret);
-		return ret;
-	}
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, 2) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_0);
 
-	ret = clk_enable(i2c_dev->slow_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to enable slow clock: %d\n", ret);
-		goto disable_fast_clk;
-	}
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_TBUF, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STO, 7) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_THD_STA, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STA, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_1);
 
-	ret = clk_enable(i2c_dev->div_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev,
-			"Enabling div clk failed, err %d\n", ret);
-		goto disable_slow_clk;
-	}
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, 3) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, 8);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_0);
 
-	/*
-	 * VI I2C device is attached to VE power domain which goes through
-	 * power ON/OFF during PM runtime resume/suspend. So, controller
-	 * should go through reset and need to re-initialize after power
-	 * domain ON.
-	 */
-	if (i2c_dev->is_vi) {
-		ret = tegra_i2c_init(i2c_dev, true);
-		if (ret)
-			goto disable_div_clk;
-	}
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STO, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_THD_STA, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STA, 11);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_1);
 
-	return 0;
+	value = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND;
+	i2c_writel(i2c_dev, value, I2C_BUS_CLEAR_CNFG);
 
-disable_div_clk:
-	clk_disable(i2c_dev->div_clk);
-disable_slow_clk:
-	clk_disable(i2c_dev->slow_clk);
-disable_fast_clk:
-	clk_disable(i2c_dev->fast_clk);
-	return ret;
+	i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT);
 }
 
-static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
+static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
+				   u32 reg, u32 mask, u32 delay_us,
+				   u32 timeout_us)
 {
-	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
+	u32 val;
 
-	clk_disable(i2c_dev->div_clk);
-	clk_disable(i2c_dev->slow_clk);
-	clk_disable(i2c_dev->fast_clk);
+	if (!i2c_dev->atomic_mode)
+		return readl_relaxed_poll_timeout(addr, val, !(val & mask),
+						  delay_us, timeout_us);
 
-	return pinctrl_pm_select_idle_state(i2c_dev->dev);
+	return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
+						 delay_us, timeout_us);
 }
 
-static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
 {
-	unsigned long reg_offset;
-	void __iomem *addr;
-	u32 val;
+	u32 mask, val, offset;
 	int err;
 
-	if (i2c_dev->hw->has_config_load_reg) {
-		reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
-		addr = i2c_dev->base + reg_offset;
-		i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
+	if (i2c_dev->hw->has_mst_fifo) {
+		mask = I2C_MST_FIFO_CONTROL_TX_FLUSH |
+		       I2C_MST_FIFO_CONTROL_RX_FLUSH;
+		offset = I2C_MST_FIFO_CONTROL;
+	} else {
+		mask = I2C_FIFO_CONTROL_TX_FLUSH |
+		       I2C_FIFO_CONTROL_RX_FLUSH;
+		offset = I2C_FIFO_CONTROL;
+	}
 
-		if (i2c_dev->is_curr_atomic_xfer)
-			err = readl_relaxed_poll_timeout_atomic(
-						addr, val, val == 0, 1000,
-						I2C_CONFIG_LOAD_TIMEOUT);
-		else
-			err = readl_relaxed_poll_timeout(
-						addr, val, val == 0, 1000,
-						I2C_CONFIG_LOAD_TIMEOUT);
+	val = i2c_readl(i2c_dev, offset);
+	val |= mask;
+	i2c_writel(i2c_dev, val, offset);
 
-		if (err) {
-			dev_warn(i2c_dev->dev,
-				 "timeout waiting for config load\n");
-			return err;
-		}
+	err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to flush FIFO\n");
+		return err;
 	}
 
 	return 0;
 }
 
-static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 value;
-
-	value = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, 2) |
-		FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, 4);
-	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_0);
-
-	value = FIELD_PREP(I2C_INTERFACE_TIMING_TBUF, 4) |
-		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STO, 7) |
-		FIELD_PREP(I2C_INTERFACE_TIMING_THD_STA, 4) |
-		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STA, 4);
-	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_1);
+	int err;
 
-	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, 3) |
-		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, 8);
-	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_0);
+	if (!i2c_dev->hw->has_config_load_reg)
+		return 0;
 
-	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STO, 11) |
-		FIELD_PREP(I2C_HS_INTERFACE_TIMING_THD_STA, 11) |
-		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STA, 11);
-	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_1);
+	i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
 
-	value = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND;
-	i2c_writel(i2c_dev, value, I2C_BUS_CLEAR_CNFG);
+	err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
+				      1000, I2C_CONFIG_LOAD_TIMEOUT);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to load config\n");
+		return err;
+	}
 
-	i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT);
+	return 0;
 }
 
-static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
 {
-	u32 val;
+	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
 	int err;
-	u32 clk_divisor, clk_multiplier;
-	u32 tsu_thd;
-	u8 tlow, thigh;
 
-	reset_control_assert(i2c_dev->rst);
-	udelay(2);
-	reset_control_deassert(i2c_dev->rst);
+	/*
+	 * The reset shouldn't ever fail in practice. The failure will be a
+	 * sign of a severe problem that needs to be resolved. Still we don't
+	 * want to fail the initialization completely because this may break
+	 * kernel boot up since voltage regulators use I2C. Hence, we will
+	 * emit a noisy warning on error, which won't stay unnoticed and
+	 * won't hose machine entirely.
+	 */
+	err = reset_control_reset(i2c_dev->rst);
+	WARN_ON_ONCE(err);
 
 	if (i2c_dev->is_dvc)
 		tegra_dvc_init(i2c_dev);
@@ -798,24 +619,33 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	if (i2c_dev->is_vi)
 		tegra_i2c_vi_init(i2c_dev);
 
-	/* Make sure clock divisor programmed correctly */
-	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
-				 i2c_dev->hw->clk_divisor_hs_mode) |
-		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE,
-				 i2c_dev->clk_divisor_non_hs_mode);
-	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
-
-	if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
-	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ) {
+	switch (i2c_dev->bus_clk_rate) {
+	case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
+	default:
 		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
 		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
 		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
-	} else {
+
+		if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ)
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
+		else
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
+		break;
+
+	case 0 ... I2C_MAX_STANDARD_MODE_FREQ:
 		tlow = i2c_dev->hw->tlow_std_mode;
 		thigh = i2c_dev->hw->thigh_std_mode;
 		tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
+		non_hs_mode = i2c_dev->hw->clk_divisor_std_mode;
+		break;
 	}
 
+	/* make sure clock divisor programmed correctly */
+	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
+				 i2c_dev->hw->clk_divisor_hs_mode) |
+		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode);
+	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
+
 	if (i2c_dev->hw->has_interface_timing_reg) {
 		val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
 		      FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
@@ -823,22 +653,19 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	}
 
 	/*
-	 * configure setup and hold times only when tsu_thd is non-zero.
-	 * otherwise, preserve the chip default values
+	 * Configure setup and hold times only when tsu_thd is non-zero.
+	 * Otherwise, preserve the chip default values.
 	 */
 	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
 		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
 
-	if (!clk_reinit) {
-		clk_multiplier = (tlow + thigh + 2);
-		clk_multiplier *= (i2c_dev->clk_divisor_non_hs_mode + 1);
-		err = clk_set_rate(i2c_dev->div_clk,
-				   i2c_dev->bus_clk_rate * clk_multiplier);
-		if (err) {
-			dev_err(i2c_dev->dev,
-				"failed changing clock rate: %d\n", err);
-			return err;
-		}
+	clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
+
+	err = clk_set_rate(i2c_dev->div_clk,
+			   i2c_dev->bus_clk_rate * clk_multiplier);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err);
+		return err;
 	}
 
 	if (!i2c_dev->is_dvc && !i2c_dev->is_vi) {
@@ -854,7 +681,7 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev, bool clk_reinit)
 	if (err)
 		return err;
 
-	if (i2c_dev->is_multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
+	if (i2c_dev->multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
 		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
 
 	err = tegra_i2c_wait_for_config_load(i2c_dev);
@@ -870,7 +697,7 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
 
 	/*
 	 * NACK interrupt is generated before the I2C controller generates
-	 * the STOP condition on the bus. So wait for 2 clock periods
+	 * the STOP condition on the bus.  So, wait for 2 clock periods
 	 * before disabling the controller so that the STOP condition has
 	 * been delivered properly.
 	 */
@@ -883,16 +710,145 @@ static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
 	return tegra_i2c_wait_for_config_load(i2c_dev);
 }
 
+static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	unsigned int words_to_transfer, rx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	u32 val;
+
+	/*
+	 * Catch overflow due to message fully sent before the check for
+	 * RX FIFO availability.
+	 */
+	if (WARN_ON_ONCE(!(i2c_dev->msg_buf_remaining)))
+		return -EINVAL;
+
+	if (i2c_dev->hw->has_mst_fifo) {
+		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+		rx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_RX, val);
+	} else {
+		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+		rx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_RX, val);
+	}
+
+	/* round down to exclude partial word at the end of buffer */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+	if (words_to_transfer > rx_fifo_avail)
+		words_to_transfer = rx_fifo_avail;
+
+	i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer);
+
+	buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+	rx_fifo_avail -= words_to_transfer;
+
+	/*
+	 * If there is a partial word at the end of buffer, handle it
+	 * manually to prevent overwriting past the end of buffer.
+	 */
+	if (rx_fifo_avail > 0 && buf_remaining > 0) {
+		/*
+		 * buf_remaining > 3 check not needed as rx_fifo_avail == 0
+		 * when (words_to_transfer was > rx_fifo_avail) earlier
+		 * in this function.
+		 */
+		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
+		val = cpu_to_le32(val);
+		memcpy(buf, &val, buf_remaining);
+		buf_remaining = 0;
+		rx_fifo_avail--;
+	}
+
+	/* RX FIFO must be drained, otherwise it's an Overflow case. */
+	if (WARN_ON_ONCE(rx_fifo_avail))
+		return -EINVAL;
+
+	i2c_dev->msg_buf_remaining = buf_remaining;
+	i2c_dev->msg_buf = buf;
+
+	return 0;
+}
+
+static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	unsigned int words_to_transfer, tx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	u32 val;
+
+	if (i2c_dev->hw->has_mst_fifo) {
+		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+		tx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_TX, val);
+	} else {
+		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+		tx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_TX, val);
+	}
+
+	/* round down to exclude partial word at the end of buffer */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+
+	/*
+	 * This hunk pushes 4 bytes at a time into the TX FIFO.
+	 *
+	 * It's very common to have < 4 bytes, hence there is no word
+	 * to push if we have less than 4 bytes to transfer.
+	 */
+	if (words_to_transfer) {
+		if (words_to_transfer > tx_fifo_avail)
+			words_to_transfer = tx_fifo_avail;
+
+		/*
+		 * Update state before writing to FIFO.  Note that this may
+		 * cause us to finish writing all bytes (AKA buf_remaining
+		 * goes to 0), hence we have a potential for an interrupt
+		 * (PACKET_XFER_COMPLETE is not maskable), but GIC interrupt
+		 * is disabled at this point.
+		 */
+		buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+		tx_fifo_avail -= words_to_transfer;
+
+		i2c_dev->msg_buf_remaining = buf_remaining;
+		i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
+
+		i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+
+		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	}
+
+	/*
+	 * If there is a partial word at the end of buffer, handle it manually
+	 * to prevent reading past the end of buffer, which could cross a page
+	 * boundary and fault.
+	 */
+	if (tx_fifo_avail > 0 && buf_remaining > 0) {
+		/*
+		 * buf_remaining > 3 check not needed as tx_fifo_avail == 0
+		 * when (words_to_transfer was > tx_fifo_avail) earlier
+		 * in this function for non-zero words_to_transfer.
+		 */
+		memcpy(&val, buf, buf_remaining);
+		val = le32_to_cpu(val);
+
+		i2c_dev->msg_buf_remaining = 0;
+		i2c_dev->msg_buf = NULL;
+
+		i2c_writel(i2c_dev, val, I2C_TX_FIFO);
+	}
+
+	return 0;
+}
+
 static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 {
-	u32 status;
 	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	struct tegra_i2c_dev *i2c_dev = dev_id;
+	u32 status;
 
 	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
 	if (status == 0) {
-		dev_warn(i2c_dev->dev, "irq status 0 %08x %08x %08x\n",
+		dev_warn(i2c_dev->dev, "IRQ status 0 %08x %08x %08x\n",
 			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
 			 i2c_readl(i2c_dev, I2C_STATUS),
 			 i2c_readl(i2c_dev, I2C_CNFG));
@@ -900,7 +856,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 		goto err;
 	}
 
-	if (unlikely(status & status_err)) {
+	if (status & status_err) {
 		tegra_i2c_disable_packet_mode(i2c_dev);
 		if (status & I2C_INT_NO_ACK)
 			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
@@ -910,13 +866,13 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	}
 
 	/*
-	 * I2C transfer is terminated during the bus clear so skip
+	 * I2C transfer is terminated during the bus clear, so skip
 	 * processing the other interrupts.
 	 */
 	if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
 		goto err;
 
-	if (!i2c_dev->is_curr_dma_xfer) {
+	if (!i2c_dev->dma_mode) {
 		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
 			if (tegra_i2c_empty_rx_fifo(i2c_dev)) {
 				/*
@@ -946,11 +902,12 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	 * During message read XFER_COMPLETE interrupt is triggered prior to
 	 * DMA completion and during message write XFER_COMPLETE interrupt is
 	 * triggered after DMA completion.
-	 * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer.
+	 *
+	 * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer,
 	 * so forcing msg_buf_remaining to 0 in DMA mode.
 	 */
 	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
-		if (i2c_dev->is_curr_dma_xfer)
+		if (i2c_dev->dma_mode)
 			i2c_dev->msg_buf_remaining = 0;
 		/*
 		 * Underflow error condition: XFER_COMPLETE before message
@@ -964,17 +921,23 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
 	}
 	goto done;
 err:
-	/* An error occurred, mask all interrupts */
-	tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
-		I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
-		I2C_INT_RX_FIFO_DATA_REQ);
+	/* mask all interrupts on error */
+	tegra_i2c_mask_irq(i2c_dev,
+			   I2C_INT_NO_ACK |
+			   I2C_INT_ARBITRATION_LOST |
+			   I2C_INT_PACKET_XFER_COMPLETE |
+			   I2C_INT_TX_FIFO_DATA_REQ |
+			   I2C_INT_RX_FIFO_DATA_REQ);
+
 	if (i2c_dev->hw->supports_bus_clear)
 		tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
 	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+
 	if (i2c_dev->is_dvc)
 		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
 
-	if (i2c_dev->is_curr_dma_xfer) {
+	if (i2c_dev->dma_mode) {
 		if (i2c_dev->msg_read)
 			dmaengine_terminate_async(i2c_dev->rx_dma_chan);
 		else
@@ -991,19 +954,17 @@ done:
 static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 				       size_t len)
 {
-	u32 val, reg;
-	u8 dma_burst;
 	struct dma_slave_config slv_config = {0};
+	u32 val, reg, dma_burst, reg_offset;
 	struct dma_chan *chan;
-	int ret;
-	unsigned long reg_offset;
+	int err;
 
 	if (i2c_dev->hw->has_mst_fifo)
 		reg = I2C_MST_FIFO_CONTROL;
 	else
 		reg = I2C_FIFO_CONTROL;
 
-	if (i2c_dev->is_curr_dma_xfer) {
+	if (i2c_dev->dma_mode) {
 		if (len & 0xF)
 			dma_burst = 1;
 		else if (len & 0x10)
@@ -1014,6 +975,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		if (i2c_dev->msg_read) {
 			chan = i2c_dev->rx_dma_chan;
 			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_RX_FIFO);
+
 			slv_config.src_addr = i2c_dev->base_phys + reg_offset;
 			slv_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 			slv_config.src_maxburst = dma_burst;
@@ -1025,6 +987,7 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		} else {
 			chan = i2c_dev->tx_dma_chan;
 			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_TX_FIFO);
+
 			slv_config.dst_addr = i2c_dev->base_phys + reg_offset;
 			slv_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 			slv_config.dst_maxburst = dma_burst;
@@ -1036,13 +999,13 @@ static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
 		}
 
 		slv_config.device_fc = true;
-		ret = dmaengine_slave_config(chan, &slv_config);
-		if (ret < 0) {
-			dev_err(i2c_dev->dev, "DMA slave config failed: %d\n",
-				ret);
+		err = dmaengine_slave_config(chan, &slv_config);
+		if (err) {
+			dev_err(i2c_dev->dev, "DMA config failed: %d\n", err);
 			dev_err(i2c_dev->dev, "falling back to PIO\n");
+
 			tegra_i2c_release_dma(i2c_dev);
-			i2c_dev->is_curr_dma_xfer = false;
+			i2c_dev->dma_mode = false;
 		} else {
 			goto out;
 		}
@@ -1058,10 +1021,9 @@ out:
 	i2c_writel(i2c_dev, val, reg);
 }
 
-static unsigned long
-tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
-				  struct completion *complete,
-				  unsigned int timeout_ms)
+static unsigned long tegra_i2c_poll_completion(struct tegra_i2c_dev *i2c_dev,
+					       struct completion *complete,
+					       unsigned int timeout_ms)
 {
 	ktime_t ktime = ktime_get();
 	ktime_t ktimeout = ktime_add_ms(ktime, timeout_ms);
@@ -1085,16 +1047,14 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	return 0;
 }
 
-static unsigned long
-tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
-				  struct completion *complete,
-				  unsigned int timeout_ms)
+static unsigned long tegra_i2c_wait_completion(struct tegra_i2c_dev *i2c_dev,
+					       struct completion *complete,
+					       unsigned int timeout_ms)
 {
 	unsigned long ret;
 
-	if (i2c_dev->is_curr_atomic_xfer) {
-		ret = tegra_i2c_poll_completion_timeout(i2c_dev, complete,
-							timeout_ms);
+	if (i2c_dev->atomic_mode) {
+		ret = tegra_i2c_poll_completion(i2c_dev, complete, timeout_ms);
 	} else {
 		enable_irq(i2c_dev->irq);
 		ret = wait_for_completion_timeout(complete,
@@ -1112,8 +1072,7 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		 * needs to be checked after timeout.
 		 */
 		if (ret == 0)
-			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
-								complete, 0);
+			ret = tegra_i2c_poll_completion(i2c_dev, complete, 0);
 	}
 
 	return ret;
@@ -1122,60 +1081,134 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u32 val, time_left;
 	int err;
-	unsigned long time_left;
-	u32 reg;
 
 	reinit_completion(&i2c_dev->msg_complete);
-	reg = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
+
+	val = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
 	      I2C_BC_TERMINATE;
-	i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
-	if (i2c_dev->hw->has_config_load_reg) {
-		err = tegra_i2c_wait_for_config_load(i2c_dev);
-		if (err)
-			return err;
-	}
+	i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
+
+	err = tegra_i2c_wait_for_config_load(i2c_dev);
+	if (err)
+		return err;
 
-	reg |= I2C_BC_ENABLE;
-	i2c_writel(i2c_dev, reg, I2C_BUS_CLEAR_CNFG);
+	val |= I2C_BC_ENABLE;
+	i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
 	tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
 
-	time_left = tegra_i2c_wait_completion_timeout(
-			i2c_dev, &i2c_dev->msg_complete, 50);
+	time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete, 50);
+	tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
 	if (time_left == 0) {
-		dev_err(i2c_dev->dev, "timed out for bus clear\n");
+		dev_err(i2c_dev->dev, "failed to clear bus\n");
 		return -ETIMEDOUT;
 	}
 
-	reg = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
-	if (!(reg & I2C_BC_STATUS)) {
-		dev_err(i2c_dev->dev,
-			"un-recovered arbitration lost\n");
+	val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
+	if (!(val & I2C_BC_STATUS)) {
+		dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
 		return -EIO;
 	}
 
 	return -EAGAIN;
 }
 
+static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
+					 struct i2c_msg *msg,
+					 enum msg_end_type end_state)
+{
+	u32 *dma_buf = i2c_dev->dma_buf;
+	u32 packet_header;
+
+	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
+			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
+				   PACKET_HEADER0_PROTOCOL_I2C) |
+			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
+			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = msg->len - 1;
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = I2C_HEADER_IE_ENABLE;
+
+	if (end_state == MSG_END_CONTINUE)
+		packet_header |= I2C_HEADER_CONTINUE_XFER;
+	else if (end_state == MSG_END_REPEAT_START)
+		packet_header |= I2C_HEADER_REPEAT_START;
+
+	if (msg->flags & I2C_M_TEN) {
+		packet_header |= msg->addr;
+		packet_header |= I2C_HEADER_10BIT_ADDR;
+	} else {
+		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+	}
+
+	if (msg->flags & I2C_M_IGNORE_NAK)
+		packet_header |= I2C_HEADER_CONT_ON_NAK;
+
+	if (msg->flags & I2C_M_RD)
+		packet_header |= I2C_HEADER_READ;
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+}
+
+static int tegra_i2c_error_recover(struct tegra_i2c_dev *i2c_dev,
+				   struct i2c_msg *msg)
+{
+	if (i2c_dev->msg_err == I2C_ERR_NONE)
+		return 0;
+
+	tegra_i2c_init(i2c_dev);
+
+	/* start recovery upon arbitration loss in single master mode */
+	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
+		if (!i2c_dev->multimaster_mode)
+			return i2c_recover_bus(&i2c_dev->adapter);
+
+		return -EAGAIN;
+	}
+
+	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return 0;
+
+		return -EREMOTEIO;
+	}
+
+	return -EIO;
+}
+
 static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 			      struct i2c_msg *msg,
 			      enum msg_end_type end_state)
 {
-	u32 packet_header;
-	u32 int_mask;
-	unsigned long time_left;
+	unsigned long time_left, xfer_time = 100;
 	size_t xfer_size;
-	u32 *buffer = NULL;
-	int err = 0;
-	bool dma;
-	u16 xfer_time = 100;
+	u32 int_mask;
+	int err;
 
-	tegra_i2c_flush_fifos(i2c_dev);
+	err = tegra_i2c_flush_fifos(i2c_dev);
+	if (err)
+		return err;
 
 	i2c_dev->msg_buf = msg->buf;
 	i2c_dev->msg_buf_remaining = msg->len;
 	i2c_dev->msg_err = I2C_ERR_NONE;
-	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
+	i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
 	reinit_completion(&i2c_dev->msg_complete);
 
 	if (i2c_dev->msg_read)
@@ -1184,93 +1217,52 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		xfer_size = msg->len + I2C_PACKET_HEADER_SIZE;
 
 	xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
-	i2c_dev->is_curr_dma_xfer = (xfer_size > I2C_PIO_MODE_PREFERRED_LEN) &&
-				    i2c_dev->dma_buf &&
-				    !i2c_dev->is_curr_atomic_xfer;
+
+	i2c_dev->dma_mode = xfer_size > I2C_PIO_MODE_PREFERRED_LEN &&
+			    i2c_dev->dma_buf && !i2c_dev->atomic_mode;
+
 	tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
-	dma = i2c_dev->is_curr_dma_xfer;
+
 	/*
 	 * Transfer time in mSec = Total bits / transfer rate
 	 * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
 	 */
 	xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
-					i2c_dev->bus_clk_rate);
+				       i2c_dev->bus_clk_rate);
 
 	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
-	if (dma) {
+
+	if (i2c_dev->dma_mode) {
 		if (i2c_dev->msg_read) {
 			dma_sync_single_for_device(i2c_dev->dev,
 						   i2c_dev->dma_phys,
-						   xfer_size,
-						   DMA_FROM_DEVICE);
+						   xfer_size, DMA_FROM_DEVICE);
+
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err < 0) {
-				dev_err(i2c_dev->dev,
-					"starting RX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
-
 		} else {
 			dma_sync_single_for_cpu(i2c_dev->dev,
 						i2c_dev->dma_phys,
-						xfer_size,
-						DMA_TO_DEVICE);
-			buffer = i2c_dev->dma_buf;
+						xfer_size, DMA_TO_DEVICE);
 		}
 	}
 
-	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
-			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
-				   PACKET_HEADER0_PROTOCOL_I2C) |
-			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
-			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
-	if (dma && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-
-	packet_header = msg->len - 1;
-	if (dma && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
-
-	packet_header = I2C_HEADER_IE_ENABLE;
-	if (end_state == MSG_END_CONTINUE)
-		packet_header |= I2C_HEADER_CONTINUE_XFER;
-	else if (end_state == MSG_END_REPEAT_START)
-		packet_header |= I2C_HEADER_REPEAT_START;
-	if (msg->flags & I2C_M_TEN) {
-		packet_header |= msg->addr;
-		packet_header |= I2C_HEADER_10BIT_ADDR;
-	} else {
-		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
-	}
-	if (msg->flags & I2C_M_IGNORE_NAK)
-		packet_header |= I2C_HEADER_CONT_ON_NAK;
-	if (msg->flags & I2C_M_RD)
-		packet_header |= I2C_HEADER_READ;
-	if (dma && !i2c_dev->msg_read)
-		*buffer++ = packet_header;
-	else
-		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+	tegra_i2c_push_packet_header(i2c_dev, msg, end_state);
 
 	if (!i2c_dev->msg_read) {
-		if (dma) {
-			memcpy(buffer, msg->buf, msg->len);
+		if (i2c_dev->dma_mode) {
+			memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
+			       msg->buf, msg->len);
+
 			dma_sync_single_for_device(i2c_dev->dev,
 						   i2c_dev->dma_phys,
-						   xfer_size,
-						   DMA_TO_DEVICE);
+						   xfer_size, DMA_TO_DEVICE);
+
 			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
-			if (err < 0) {
-				dev_err(i2c_dev->dev,
-					"starting TX DMA failed, err %d\n",
-					err);
+			if (err)
 				return err;
-			}
 		} else {
 			tegra_i2c_fill_tx_fifo(i2c_dev);
 		}
@@ -1278,7 +1270,8 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 
 	if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
 		int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
-	if (!dma) {
+
+	if (!i2c_dev->dma_mode) {
 		if (msg->flags & I2C_M_RD)
 			int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
 		else if (i2c_dev->msg_buf_remaining)
@@ -1286,12 +1279,13 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	}
 
 	tegra_i2c_unmask_irq(i2c_dev, int_mask);
-	dev_dbg(i2c_dev->dev, "unmasked irq: %02x\n",
+	dev_dbg(i2c_dev->dev, "unmasked IRQ: %02x\n",
 		i2c_readl(i2c_dev, I2C_INT_MASK));
 
-	if (dma) {
-		time_left = tegra_i2c_wait_completion_timeout(
-				i2c_dev, &i2c_dev->dma_complete, xfer_time);
+	if (i2c_dev->dma_mode) {
+		time_left = tegra_i2c_wait_completion(i2c_dev,
+						      &i2c_dev->dma_complete,
+						      xfer_time);
 
 		/*
 		 * Synchronize DMA first, since dmaengine_terminate_sync()
@@ -1307,29 +1301,28 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 					 i2c_dev->tx_dma_chan);
 
 		if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
-			dev_err(i2c_dev->dev, "DMA transfer timeout\n");
-			tegra_i2c_init(i2c_dev, true);
+			dev_err(i2c_dev->dev, "DMA transfer timed out\n");
+			tegra_i2c_init(i2c_dev);
 			return -ETIMEDOUT;
 		}
 
 		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) {
 			dma_sync_single_for_cpu(i2c_dev->dev,
 						i2c_dev->dma_phys,
-						xfer_size,
-						DMA_FROM_DEVICE);
-			memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf,
-			       msg->len);
+						xfer_size, DMA_FROM_DEVICE);
+
+			memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, msg->len);
 		}
 	}
 
-	time_left = tegra_i2c_wait_completion_timeout(
-			i2c_dev, &i2c_dev->msg_complete, xfer_time);
+	time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete,
+					      xfer_time);
 
 	tegra_i2c_mask_irq(i2c_dev, int_mask);
 
 	if (time_left == 0) {
-		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
-		tegra_i2c_init(i2c_dev, true);
+		dev_err(i2c_dev->dev, "I2C transfer timed out\n");
+		tegra_i2c_init(i2c_dev);
 		return -ETIMEDOUT;
 	}
 
@@ -1337,37 +1330,25 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left, completion_done(&i2c_dev->msg_complete),
 		i2c_dev->msg_err);
 
-	i2c_dev->is_curr_dma_xfer = false;
-	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
-		return 0;
+	i2c_dev->dma_mode = false;
 
-	tegra_i2c_init(i2c_dev, true);
-	/* start recovery upon arbitration loss in single master mode */
-	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
-		if (!i2c_dev->is_multimaster_mode)
-			return i2c_recover_bus(&i2c_dev->adapter);
-		return -EAGAIN;
-	}
-
-	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
-		if (msg->flags & I2C_M_IGNORE_NAK)
-			return 0;
-		return -EREMOTEIO;
-	}
+	err = tegra_i2c_error_recover(i2c_dev, msg);
+	if (err)
+		return err;
 
-	return -EIO;
+	return 0;
 }
 
 static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 			  int num)
 {
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
-	int i;
-	int ret;
+	int i, ret;
 
 	ret = pm_runtime_get_sync(i2c_dev->dev);
 	if (ret < 0) {
 		dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
+		pm_runtime_put_noidle(i2c_dev->dev);
 		return ret;
 	}
 
@@ -1375,6 +1356,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 		enum msg_end_type end_type = MSG_END_STOP;
 
 		if (i < (num - 1)) {
+			/* check whether follow up message is coming */
 			if (msgs[i + 1].flags & I2C_M_NOSTART)
 				end_type = MSG_END_CONTINUE;
 			else
@@ -1396,9 +1378,9 @@ static int tegra_i2c_xfer_atomic(struct i2c_adapter *adap,
 	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
 	int ret;
 
-	i2c_dev->is_curr_atomic_xfer = true;
+	i2c_dev->atomic_mode = true;
 	ret = tegra_i2c_xfer(adap, msgs, num);
-	i2c_dev->is_curr_atomic_xfer = false;
+	i2c_dev->atomic_mode = false;
 
 	return ret;
 }
@@ -1411,22 +1393,8 @@ static u32 tegra_i2c_func(struct i2c_adapter *adap)
 
 	if (i2c_dev->hw->has_continue_xfer_support)
 		ret |= I2C_FUNC_NOSTART;
-	return ret;
-}
 
-static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
-{
-	struct device_node *np = i2c_dev->dev->of_node;
-	int ret;
-	bool multi_mode;
-
-	ret = of_property_read_u32(np, "clock-frequency",
-				   &i2c_dev->bus_clk_rate);
-	if (ret)
-		i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; /* default clock rate */
-
-	multi_mode = of_property_read_bool(np, "multi-master");
-	i2c_dev->is_multimaster_mode = multi_mode;
+	return ret;
 }
 
 static const struct i2c_algorithm tegra_i2c_algo = {
@@ -1454,7 +1422,6 @@ static struct i2c_bus_recovery_info tegra_i2c_recovery_info = {
 static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 	.has_continue_xfer_support = false,
 	.has_per_pkt_xfer_complete_irq = false,
-	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
 	.clk_divisor_std_mode = 0,
 	.clk_divisor_fast_mode = 0,
@@ -1479,7 +1446,6 @@ static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = false,
-	.has_single_clk_source = false,
 	.clk_divisor_hs_mode = 3,
 	.clk_divisor_std_mode = 0,
 	.clk_divisor_fast_mode = 0,
@@ -1504,7 +1470,6 @@ static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1529,7 +1494,6 @@ static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1554,7 +1518,6 @@ static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x19,
 	.clk_divisor_fast_mode = 0x19,
@@ -1579,7 +1542,6 @@ static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x16,
 	.clk_divisor_fast_mode = 0x19,
@@ -1604,7 +1566,6 @@ static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
 static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_continue_xfer_support = true,
 	.has_per_pkt_xfer_complete_irq = true,
-	.has_single_clk_source = true,
 	.clk_divisor_hs_mode = 1,
 	.clk_divisor_std_mode = 0x4f,
 	.clk_divisor_fast_mode = 0x3c,
@@ -1626,7 +1587,6 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
 	.has_interface_timing_reg = true,
 };
 
-/* Match table for of_platform binding */
 static const struct of_device_id tegra_i2c_of_match[] = {
 	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
 	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
@@ -1641,223 +1601,196 @@ static const struct of_device_id tegra_i2c_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
 
-static int tegra_i2c_probe(struct platform_device *pdev)
+static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
 {
-	struct device *dev = &pdev->dev;
-	struct tegra_i2c_dev *i2c_dev;
-	struct resource *res;
-	struct clk *div_clk;
-	struct clk *fast_clk;
-	void __iomem *base;
-	phys_addr_t base_phys;
-	int irq;
-	int ret;
+	struct device_node *np = i2c_dev->dev->of_node;
+	bool multi_mode;
+	int err;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base_phys = res->start;
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	err = of_property_read_u32(np, "clock-frequency",
+				   &i2c_dev->bus_clk_rate);
+	if (err)
+		i2c_dev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "no irq resource\n");
-		return -EINVAL;
-	}
-	irq = res->start;
+	multi_mode = of_property_read_bool(np, "multi-master");
+	i2c_dev->multimaster_mode = multi_mode;
+
+	if (of_device_is_compatible(np, "nvidia,tegra20-i2c-dvc"))
+		i2c_dev->is_dvc = true;
+
+	if (of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
+		i2c_dev->is_vi = true;
+}
+
+static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	int err;
+
+	i2c_dev->clocks[i2c_dev->nclocks++].id = "div-clk";
+
+	if (i2c_dev->hw == &tegra20_i2c_hw || i2c_dev->hw == &tegra30_i2c_hw)
+		i2c_dev->clocks[i2c_dev->nclocks++].id = "fast-clk";
 
-	div_clk = devm_clk_get(&pdev->dev, "div-clk");
-	if (IS_ERR(div_clk)) {
-		if (PTR_ERR(div_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "missing controller clock\n");
+	if (i2c_dev->is_vi)
+		i2c_dev->clocks[i2c_dev->nclocks++].id = "slow";
+
+	err = devm_clk_bulk_get(i2c_dev->dev, i2c_dev->nclocks,
+				i2c_dev->clocks);
+	if (err)
+		return err;
+
+	err = clk_bulk_prepare(i2c_dev->nclocks, i2c_dev->clocks);
+	if (err)
+		return err;
+
+	i2c_dev->div_clk = i2c_dev->clocks[0].clk;
+
+	if (!i2c_dev->multimaster_mode)
+		return 0;
 
-		return PTR_ERR(div_clk);
+	err = clk_enable(i2c_dev->div_clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable div-clk: %d\n", err);
+		goto unprepare_clocks;
 	}
 
+	return 0;
+
+unprepare_clocks:
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return err;
+}
+
+static void tegra_i2c_release_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	if (i2c_dev->multimaster_mode)
+		clk_disable(i2c_dev->div_clk);
+
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+}
+
+static int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		dev_err(i2c_dev->dev, "runtime resume failed: %d\n", ret);
+	else
+		ret = tegra_i2c_init(i2c_dev);
+
+	pm_runtime_put(i2c_dev->dev);
+
+	return ret;
+}
+
+static int tegra_i2c_probe(struct platform_device *pdev)
+{
+	struct tegra_i2c_dev *i2c_dev;
+	struct resource *res;
+	int err;
+
 	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
 	if (!i2c_dev)
 		return -ENOMEM;
 
-	i2c_dev->base = base;
-	i2c_dev->base_phys = base_phys;
-	i2c_dev->div_clk = div_clk;
-	i2c_dev->adapter.algo = &tegra_i2c_algo;
-	i2c_dev->adapter.retries = 1;
-	i2c_dev->adapter.timeout = 6 * HZ;
-	i2c_dev->irq = irq;
+	platform_set_drvdata(pdev, i2c_dev);
+
+	init_completion(&i2c_dev->msg_complete);
+	init_completion(&i2c_dev->dma_complete);
+
+	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
 	i2c_dev->cont_id = pdev->id;
 	i2c_dev->dev = &pdev->dev;
 
-	i2c_dev->rst = devm_reset_control_get_exclusive(&pdev->dev, "i2c");
-	if (IS_ERR(i2c_dev->rst)) {
-		dev_err(&pdev->dev, "missing controller reset\n");
-		return PTR_ERR(i2c_dev->rst);
-	}
+	i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
 
-	tegra_i2c_parse_dt(i2c_dev);
-
-	i2c_dev->hw = of_device_get_match_data(&pdev->dev);
-	i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
-						  "nvidia,tegra20-i2c-dvc");
-	i2c_dev->is_vi = of_device_is_compatible(dev->of_node,
-						 "nvidia,tegra210-i2c-vi");
-	i2c_dev->adapter.quirks = i2c_dev->hw->quirks;
-	i2c_dev->dma_buf_size = i2c_dev->adapter.quirks->max_write_len +
-				I2C_PACKET_HEADER_SIZE;
-	init_completion(&i2c_dev->msg_complete);
-	init_completion(&i2c_dev->dma_complete);
+	i2c_dev->base_phys = res->start;
 
-	if (!i2c_dev->hw->has_single_clk_source) {
-		fast_clk = devm_clk_get(&pdev->dev, "fast-clk");
-		if (IS_ERR(fast_clk)) {
-			dev_err(&pdev->dev, "missing fast clock\n");
-			return PTR_ERR(fast_clk);
-		}
-		i2c_dev->fast_clk = fast_clk;
-	}
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		return err;
 
-	if (i2c_dev->is_vi) {
-		i2c_dev->slow_clk = devm_clk_get(dev, "slow");
-		if (IS_ERR(i2c_dev->slow_clk)) {
-			if (PTR_ERR(i2c_dev->slow_clk) != -EPROBE_DEFER)
-				dev_err(dev, "failed to get slow clock: %ld\n",
-					PTR_ERR(i2c_dev->slow_clk));
+	i2c_dev->irq = err;
 
-			return PTR_ERR(i2c_dev->slow_clk);
-		}
-	}
+	/* interrupt will be enabled during of transfer time */
+	irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
 
-	platform_set_drvdata(pdev, i2c_dev);
+	err = devm_request_irq(i2c_dev->dev, i2c_dev->irq, tegra_i2c_isr,
+			       IRQF_NO_SUSPEND, dev_name(i2c_dev->dev),
+			       i2c_dev);
+	if (err)
+		return err;
 
-	ret = clk_prepare(i2c_dev->fast_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
-		return ret;
+	i2c_dev->rst = devm_reset_control_get_exclusive(i2c_dev->dev, "i2c");
+	if (IS_ERR(i2c_dev->rst)) {
+		dev_err_probe(i2c_dev->dev, PTR_ERR(i2c_dev->rst),
+			      "failed to get reset control\n");
+		return PTR_ERR(i2c_dev->rst);
 	}
 
-	ret = clk_prepare(i2c_dev->slow_clk);
-	if (ret < 0) {
-		dev_err(dev, "failed to prepare slow clock: %d\n", ret);
-		goto unprepare_fast_clk;
-	}
+	tegra_i2c_parse_dt(i2c_dev);
 
-	if (i2c_dev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ &&
-	    i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_PLUS_FREQ)
-		i2c_dev->clk_divisor_non_hs_mode =
-				i2c_dev->hw->clk_divisor_fast_plus_mode;
-	else if (i2c_dev->bus_clk_rate > I2C_MAX_STANDARD_MODE_FREQ &&
-		 i2c_dev->bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ)
-		i2c_dev->clk_divisor_non_hs_mode =
-				i2c_dev->hw->clk_divisor_fast_mode;
-	else
-		i2c_dev->clk_divisor_non_hs_mode =
-				i2c_dev->hw->clk_divisor_std_mode;
+	err = tegra_i2c_init_clocks(i2c_dev);
+	if (err)
+		return err;
 
-	ret = clk_prepare(i2c_dev->div_clk);
-	if (ret < 0) {
-		dev_err(i2c_dev->dev, "Clock prepare failed %d\n", ret);
-		goto unprepare_slow_clk;
-	}
+	err = tegra_i2c_init_dma(i2c_dev);
+	if (err)
+		goto release_clocks;
 
 	/*
-	 * VI I2C is in VE power domain which is not always on and not
-	 * an IRQ safe. So, IRQ safe device can't be attached to a non-IRQ
-	 * safe domain as it prevents powering off the PM domain.
-	 * Also, VI I2C device don't need to use runtime IRQ safe as it will
-	 * not be used for atomic transfers.
+	 * VI I2C is in VE power domain which is not always ON and not
+	 * IRQ-safe.  Thus, IRQ-safe device shouldn't be attached to a
+	 * non IRQ-safe domain because this prevents powering off the power
+	 * domain.
+	 *
+	 * VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
+	 * be used for atomic transfers.
 	 */
 	if (!i2c_dev->is_vi)
-		pm_runtime_irq_safe(&pdev->dev);
-	pm_runtime_enable(&pdev->dev);
-	if (!pm_runtime_enabled(&pdev->dev)) {
-		ret = tegra_i2c_runtime_resume(&pdev->dev);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "runtime resume failed\n");
-			goto unprepare_div_clk;
-		}
-	} else {
-		ret = pm_runtime_get_sync(i2c_dev->dev);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "runtime resume failed\n");
-			goto disable_rpm;
-		}
-	}
+		pm_runtime_irq_safe(i2c_dev->dev);
 
-	if (i2c_dev->is_multimaster_mode) {
-		ret = clk_enable(i2c_dev->div_clk);
-		if (ret < 0) {
-			dev_err(i2c_dev->dev, "div_clk enable failed %d\n",
-				ret);
-			goto put_rpm;
-		}
-	}
+	pm_runtime_enable(i2c_dev->dev);
 
-	if (i2c_dev->hw->supports_bus_clear)
-		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
-
-	ret = tegra_i2c_init_dma(i2c_dev);
-	if (ret < 0)
-		goto disable_div_clk;
-
-	ret = tegra_i2c_init(i2c_dev, false);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to initialize i2c controller\n");
-		goto release_dma;
-	}
-
-	irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
-
-	ret = devm_request_irq(&pdev->dev, i2c_dev->irq, tegra_i2c_isr,
-			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c_dev);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
-		goto release_dma;
-	}
+	err = tegra_i2c_init_hardware(i2c_dev);
+	if (err)
+		goto release_rpm;
 
 	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
+	i2c_dev->adapter.dev.of_node = i2c_dev->dev->of_node;
+	i2c_dev->adapter.dev.parent = i2c_dev->dev;
+	i2c_dev->adapter.retries = 1;
+	i2c_dev->adapter.timeout = 6 * HZ;
+	i2c_dev->adapter.quirks = i2c_dev->hw->quirks;
 	i2c_dev->adapter.owner = THIS_MODULE;
 	i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
-	strlcpy(i2c_dev->adapter.name, dev_name(&pdev->dev),
-		sizeof(i2c_dev->adapter.name));
-	i2c_dev->adapter.dev.parent = &pdev->dev;
+	i2c_dev->adapter.algo = &tegra_i2c_algo;
 	i2c_dev->adapter.nr = pdev->id;
-	i2c_dev->adapter.dev.of_node = pdev->dev.of_node;
-
-	ret = i2c_add_numbered_adapter(&i2c_dev->adapter);
-	if (ret)
-		goto release_dma;
-
-	pm_runtime_put(&pdev->dev);
 
-	return 0;
-
-release_dma:
-	tegra_i2c_release_dma(i2c_dev);
-
-disable_div_clk:
-	if (i2c_dev->is_multimaster_mode)
-		clk_disable(i2c_dev->div_clk);
+	if (i2c_dev->hw->supports_bus_clear)
+		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
 
-put_rpm:
-	if (pm_runtime_enabled(&pdev->dev))
-		pm_runtime_put_sync(&pdev->dev);
-	else
-		tegra_i2c_runtime_suspend(&pdev->dev);
+	strlcpy(i2c_dev->adapter.name, dev_name(i2c_dev->dev),
+		sizeof(i2c_dev->adapter.name));
 
-disable_rpm:
-	if (pm_runtime_enabled(&pdev->dev))
-		pm_runtime_disable(&pdev->dev);
+	err = i2c_add_numbered_adapter(&i2c_dev->adapter);
+	if (err)
+		goto release_rpm;
 
-unprepare_div_clk:
-	clk_unprepare(i2c_dev->div_clk);
+	return 0;
 
-unprepare_slow_clk:
-	clk_unprepare(i2c_dev->slow_clk);
+release_rpm:
+	pm_runtime_disable(i2c_dev->dev);
 
-unprepare_fast_clk:
-	clk_unprepare(i2c_dev->fast_clk);
+	tegra_i2c_release_dma(i2c_dev);
+release_clocks:
+	tegra_i2c_release_clocks(i2c_dev);
 
-	return ret;
+	return err;
 }
 
 static int tegra_i2c_remove(struct platform_device *pdev)
@@ -1865,33 +1798,69 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c_dev->adapter);
+	pm_runtime_disable(i2c_dev->dev);
 
-	if (i2c_dev->is_multimaster_mode)
-		clk_disable(i2c_dev->div_clk);
+	tegra_i2c_release_dma(i2c_dev);
+	tegra_i2c_release_clocks(i2c_dev);
 
-	pm_runtime_disable(&pdev->dev);
-	if (!pm_runtime_status_suspended(&pdev->dev))
-		tegra_i2c_runtime_suspend(&pdev->dev);
+	return 0;
+}
 
-	clk_unprepare(i2c_dev->div_clk);
-	clk_unprepare(i2c_dev->slow_clk);
-	clk_unprepare(i2c_dev->fast_clk);
+static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int err;
+
+	err = pinctrl_pm_select_default_state(dev);
+	if (err)
+		return err;
+
+	err = clk_bulk_enable(i2c_dev->nclocks, i2c_dev->clocks);
+	if (err)
+		return err;
+
+	/*
+	 * VI I2C device is attached to VE power domain which goes through
+	 * power ON/OFF during runtime PM resume/suspend, meaning that
+	 * controller needs to be re-initialized after power ON.
+	 */
+	if (i2c_dev->is_vi) {
+		err = tegra_i2c_init(i2c_dev);
+		if (err)
+			goto disable_clocks;
+	}
 
-	tegra_i2c_release_dma(i2c_dev);
 	return 0;
+
+disable_clocks:
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return err;
+}
+
+static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return pinctrl_pm_select_idle_state(dev);
 }
 
 static int __maybe_unused tegra_i2c_suspend(struct device *dev)
 {
 	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
-	int err = 0;
+	int err;
 
 	i2c_mark_adapter_suspended(&i2c_dev->adapter);
 
-	if (!pm_runtime_status_suspended(dev))
+	if (!pm_runtime_status_suspended(dev)) {
 		err = tegra_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
 
-	return err;
+	return 0;
 }
 
 static int __maybe_unused tegra_i2c_resume(struct device *dev)
@@ -1907,7 +1876,7 @@ static int __maybe_unused tegra_i2c_resume(struct device *dev)
 	if (err)
 		return err;
 
-	err = tegra_i2c_init(i2c_dev, false);
+	err = tegra_i2c_init(i2c_dev);
 	if (err)
 		return err;
 
@@ -1934,17 +1903,16 @@ static const struct dev_pm_ops tegra_i2c_pm = {
 };
 
 static struct platform_driver tegra_i2c_driver = {
-	.probe   = tegra_i2c_probe,
-	.remove  = tegra_i2c_remove,
-	.driver  = {
-		.name  = "tegra-i2c",
+	.probe = tegra_i2c_probe,
+	.remove = tegra_i2c_remove,
+	.driver = {
+		.name = "tegra-i2c",
 		.of_match_table = tegra_i2c_of_match,
-		.pm    = &tegra_i2c_pm,
+		.pm = &tegra_i2c_pm,
 	},
 };
-
 module_platform_driver(tegra_i2c_driver);
 
-MODULE_DESCRIPTION("nVidia Tegra2 I2C Bus Controller driver");
+MODULE_DESCRIPTION("NVIDIA Tegra I2C Bus Controller driver");
 MODULE_AUTHOR("Colin Cross");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 90c1c362394d..087b2951942e 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -46,34 +46,36 @@ enum xiic_endian {
 
 /**
  * struct xiic_i2c - Internal representation of the XIIC I2C bus
- * @dev:	Pointer to device structure
- * @base:	Memory base of the HW registers
- * @wait:	Wait queue for callers
- * @adap:	Kernel adapter representation
- * @tx_msg:	Messages from above to be sent
- * @lock:	Mutual exclusion
- * @tx_pos:	Current pos in TX message
- * @nmsgs:	Number of messages in tx_msg
- * @state:	See STATE_
- * @rx_msg:	Current RX message
- * @rx_pos:	Position within current RX message
+ * @dev: Pointer to device structure
+ * @base: Memory base of the HW registers
+ * @wait: Wait queue for callers
+ * @adap: Kernel adapter representation
+ * @tx_msg: Messages from above to be sent
+ * @lock: Mutual exclusion
+ * @tx_pos: Current pos in TX message
+ * @nmsgs: Number of messages in tx_msg
+ * @rx_msg: Current RX message
+ * @rx_pos: Position within current RX message
  * @endianness: big/little-endian byte order
- * @clk:	Pointer to AXI4-lite input clock
+ * @clk: Pointer to AXI4-lite input clock
+ * @state: See STATE_
+ * @singlemaster: Indicates bus is single master
  */
 struct xiic_i2c {
-	struct device		*dev;
-	void __iomem		*base;
-	wait_queue_head_t	wait;
-	struct i2c_adapter	adap;
-	struct i2c_msg		*tx_msg;
-	struct mutex		lock;
-	unsigned int		tx_pos;
-	unsigned int		nmsgs;
-	enum xilinx_i2c_state	state;
-	struct i2c_msg		*rx_msg;
-	int			rx_pos;
-	enum xiic_endian	endianness;
+	struct device *dev;
+	void __iomem *base;
+	wait_queue_head_t wait;
+	struct i2c_adapter adap;
+	struct i2c_msg *tx_msg;
+	struct mutex lock;
+	unsigned int tx_pos;
+	unsigned int nmsgs;
+	struct i2c_msg *rx_msg;
+	int rx_pos;
+	enum xiic_endian endianness;
 	struct clk *clk;
+	enum xilinx_i2c_state state;
+	bool singlemaster;
 };
 
 
@@ -526,6 +528,15 @@ static int xiic_busy(struct xiic_i2c *i2c)
 	if (i2c->tx_msg)
 		return -EBUSY;
 
+	/* In single master mode bus can only be busy, when in use by this
+	 * driver. If the register indicates bus being busy for some reason we
+	 * should ignore it, since bus will never be released and i2c will be
+	 * stuck forever.
+	 */
+	if (i2c->singlemaster) {
+		return 0;
+	}
+
 	/* for instance if previous transfer was terminated due to TX error
 	 * it might be that the bus is on it's way to become available
 	 * give it at most 3 ms to wake
@@ -811,6 +822,9 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 		goto err_clk_dis;
 	}
 
+	i2c->singlemaster =
+		of_property_read_bool(pdev->dev.of_node, "single-master");
+
 	/*
 	 * Detect endianness
 	 * Try to reset the TX FIFO. Then check the EMPTY flag. If it is not