Merge branch 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - if a host can be a client, too, the I2C core can now use it to
   emulate SMBus HostNotify support (STM32 and R-Car added this so far)

 - also for client mode, a testunit has been added. It can create rare
   situations on the bus, so host controllers can be tested

 - a binding has been added to mark the bus as "single-master". This
   allows for better timeout detections

 - new driver for Mellanox Bluefield

 - massive refactoring of the Tegra driver

 - EEPROMs recognized by the at24 driver can now have custom names

 - rest is driver updates

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
  Documentation: i2c: add testunit docs to index
  i2c: tegra: Improve driver module description
  i2c: tegra: Clean up whitespaces, newlines and indentation
  i2c: tegra: Clean up and improve comments
  i2c: tegra: Clean up printk messages
  i2c: tegra: Clean up variable names
  i2c: tegra: Improve formatting of variables
  i2c: tegra: Check errors for both positive and negative values
  i2c: tegra: Factor out hardware initialization into separate function
  i2c: tegra: Factor out register polling into separate function
  i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  i2c: tegra: Rename wait/poll functions
  i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  i2c: tegra: Remove likely/unlikely from the code
  i2c: tegra: Remove outdated barrier()
  i2c: tegra: Clean up variable types
  i2c: tegra: Reorder location of functions in the code
  i2c: tegra: Clean up probe function
  ...

1 files changed, 2506 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-mlxbf.c b/drivers/i2c/busses/i2c-mlxbf.c
new file mode 100644
index 000000000000..ee59e0da082d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mlxbf.c
@@ -0,0 +1,2506 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Mellanox BlueField I2C bus driver
+ *
+ *  Copyright (C) 2020 Mellanox Technologies, Ltd.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+/* Defines what functionality is present. */
+#define MLXBF_I2C_FUNC_SMBUS_BLOCK \
+	(I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_SMBUS_DEFAULT \
+	(I2C_FUNC_SMBUS_BYTE      | I2C_FUNC_SMBUS_BYTE_DATA | \
+	 I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK | \
+	 I2C_FUNC_SMBUS_PROC_CALL)
+
+#define MLXBF_I2C_FUNC_ALL \
+	(MLXBF_I2C_FUNC_SMBUS_DEFAULT | MLXBF_I2C_FUNC_SMBUS_BLOCK | \
+	 I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SLAVE)
+
+#define MLXBF_I2C_SMBUS_MAX        3
+
+/* Shared resources info in BlueField platforms. */
+
+#define MLXBF_I2C_COALESCE_TYU_ADDR    0x02801300
+#define MLXBF_I2C_COALESCE_TYU_SIZE    0x010
+
+#define MLXBF_I2C_GPIO_TYU_ADDR        0x02802000
+#define MLXBF_I2C_GPIO_TYU_SIZE        0x100
+
+#define MLXBF_I2C_COREPLL_TYU_ADDR     0x02800358
+#define MLXBF_I2C_COREPLL_TYU_SIZE     0x008
+
+#define MLXBF_I2C_COREPLL_YU_ADDR      0x02800c30
+#define MLXBF_I2C_COREPLL_YU_SIZE      0x00c
+
+#define MLXBF_I2C_SHARED_RES_MAX       3
+
+/*
+ * Note that the following SMBus, CAUSE, GPIO and PLL register addresses
+ * refer to their respective offsets relative to the corresponding
+ * memory-mapped region whose addresses are specified in either the DT or
+ * the ACPI tables or above.
+ */
+
+/*
+ * SMBus Master core clock frequency. Timing configurations are
+ * strongly dependent on the core clock frequency of the SMBus
+ * Master. Default value is set to 400MHz.
+ */
+#define MLXBF_I2C_TYU_PLL_OUT_FREQ  (400 * 1000 * 1000)
+/* Reference clock for Bluefield 1 - 156 MHz. */
+#define MLXBF_I2C_TYU_PLL_IN_FREQ   (156 * 1000 * 1000)
+/* Reference clock for BlueField 2 - 200 MHz. */
+#define MLXBF_I2C_YU_PLL_IN_FREQ    (200 * 1000 * 1000)
+
+/* Constant used to determine the PLL frequency. */
+#define MLNXBF_I2C_COREPLL_CONST    16384
+
+/* PLL registers. */
+#define MLXBF_I2C_CORE_PLL_REG0         0x0
+#define MLXBF_I2C_CORE_PLL_REG1         0x4
+#define MLXBF_I2C_CORE_PLL_REG2         0x8
+
+/* OR cause register. */
+#define MLXBF_I2C_CAUSE_OR_EVTEN0    0x14
+#define MLXBF_I2C_CAUSE_OR_CLEAR     0x18
+
+/* Arbiter Cause Register. */
+#define MLXBF_I2C_CAUSE_ARBITER      0x1c
+
+/*
+ * Cause Status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Transaction ended with STOP. */
+#define MLXBF_I2C_CAUSE_TRANSACTION_ENDED  BIT(0)
+/* Master arbitration lost. */
+#define MLXBF_I2C_CAUSE_M_ARBITRATION_LOST BIT(1)
+/* Unexpected start detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_START   BIT(2)
+/* Unexpected stop detected. */
+#define MLXBF_I2C_CAUSE_UNEXPECTED_STOP    BIT(3)
+/* Wait for transfer continuation. */
+#define MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA   BIT(4)
+/* Failed to generate STOP. */
+#define MLXBF_I2C_CAUSE_PUT_STOP_FAILED    BIT(5)
+/* Failed to generate START. */
+#define MLXBF_I2C_CAUSE_PUT_START_FAILED   BIT(6)
+/* Clock toggle completed. */
+#define MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE    BIT(7)
+/* Transfer timeout occurred. */
+#define MLXBF_I2C_CAUSE_M_FW_TIMEOUT       BIT(8)
+/* Master busy bit reset. */
+#define MLXBF_I2C_CAUSE_M_GW_BUSY_FALL     BIT(9)
+
+#define MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK     GENMASK(9, 0)
+
+#define MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR \
+	(MLXBF_I2C_CAUSE_M_ARBITRATION_LOST | \
+	 MLXBF_I2C_CAUSE_UNEXPECTED_START | \
+	 MLXBF_I2C_CAUSE_UNEXPECTED_STOP | \
+	 MLXBF_I2C_CAUSE_PUT_STOP_FAILED | \
+	 MLXBF_I2C_CAUSE_PUT_START_FAILED | \
+	 MLXBF_I2C_CAUSE_CLK_TOGGLE_DONE | \
+	 MLXBF_I2C_CAUSE_M_FW_TIMEOUT)
+
+/*
+ * Slave cause status flags. Note that those bits might be considered
+ * as interrupt enabled bits.
+ */
+
+/* Write transaction received successfully. */
+#define MLXBF_I2C_CAUSE_WRITE_SUCCESS         BIT(0)
+/* Read transaction received, waiting for response. */
+#define MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE BIT(13)
+/* Slave busy bit reset. */
+#define MLXBF_I2C_CAUSE_S_GW_BUSY_FALL        BIT(18)
+
+#define MLXBF_I2C_CAUSE_SLAVE_ARBITER_BITS_MASK     GENMASK(20, 0)
+
+/* Cause coalesce registers. */
+#define MLXBF_I2C_CAUSE_COALESCE_0        0x00
+#define MLXBF_I2C_CAUSE_COALESCE_1        0x04
+#define MLXBF_I2C_CAUSE_COALESCE_2        0x08
+
+#define MLXBF_I2C_CAUSE_TYU_SLAVE_BIT   MLXBF_I2C_SMBUS_MAX
+#define MLXBF_I2C_CAUSE_YU_SLAVE_BIT    1
+
+/* Functional enable register. */
+#define MLXBF_I2C_GPIO_0_FUNC_EN_0    0x28
+/* Force OE enable register. */
+#define MLXBF_I2C_GPIO_0_FORCE_OE_EN  0x30
+/*
+ * Note that Smbus GWs are on GPIOs 30:25. Two pins are used to control
+ * SDA/SCL lines:
+ *
+ *  SMBUS GW0 -> bits[26:25]
+ *  SMBUS GW1 -> bits[28:27]
+ *  SMBUS GW2 -> bits[30:29]
+ */
+#define MLXBF_I2C_GPIO_SMBUS_GW_PINS(num) (25 + ((num) << 1))
+
+/* Note that gw_id can be 0,1 or 2. */
+#define MLXBF_I2C_GPIO_SMBUS_GW_MASK(num) \
+	(0xffffffff & (~(0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num))))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(num, val) \
+	((val) & MLXBF_I2C_GPIO_SMBUS_GW_MASK(num))
+
+#define MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(num, val) \
+	((val) | (0x3 << MLXBF_I2C_GPIO_SMBUS_GW_PINS(num)))
+
+/* SMBus timing parameters. */
+#define MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH    0x00
+#define MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE     0x04
+#define MLXBF_I2C_SMBUS_TIMER_THOLD               0x08
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP   0x0c
+#define MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA         0x10
+#define MLXBF_I2C_SMBUS_THIGH_MAX_TBUF            0x14
+#define MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT           0x18
+
+enum {
+	MLXBF_I2C_TIMING_100KHZ = 100000,
+	MLXBF_I2C_TIMING_400KHZ = 400000,
+	MLXBF_I2C_TIMING_1000KHZ = 1000000,
+};
+
+/*
+ * Defines SMBus operating frequency and core clock frequency.
+ * According to ADB files, default values are compliant to 100KHz SMBus
+ * @ 400MHz core clock. The driver should be able to calculate core
+ * frequency based on PLL parameters.
+ */
+#define MLXBF_I2C_COREPLL_FREQ          MLXBF_I2C_TYU_PLL_OUT_FREQ
+
+/* Core PLL TYU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_TYU_MASK   GENMASK(12, 0)
+#define MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK  GENMASK(3, 0)
+#define MLXBF_I2C_COREPLL_CORE_R_TYU_MASK   GENMASK(5, 0)
+
+#define MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT  3
+#define MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT 16
+#define MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT  20
+
+/* Core PLL YU configuration. */
+#define MLXBF_I2C_COREPLL_CORE_F_YU_MASK    GENMASK(25, 0)
+#define MLXBF_I2C_COREPLL_CORE_OD_YU_MASK   GENMASK(3, 0)
+#define MLXBF_I2C_COREPLL_CORE_R_YU_MASK    GENMASK(5, 0)
+
+#define MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT   0
+#define MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT  1
+#define MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT   26
+
+/* Core PLL frequency. */
+static u64 mlxbf_i2c_corepll_frequency;
+
+/* SMBus Master GW. */
+#define MLXBF_I2C_SMBUS_MASTER_GW     0x200
+/* Number of bytes received and sent. */
+#define MLXBF_I2C_SMBUS_RS_BYTES      0x300
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_MASTER_PEC    0x304
+/* Status bits (ACK/NACK/FW Timeout). */
+#define MLXBF_I2C_SMBUS_MASTER_STATUS 0x308
+/* SMbus Master Finite State Machine. */
+#define MLXBF_I2C_SMBUS_MASTER_FSM    0x310
+
+/*
+ * When enabled, the master will issue a stop condition in case of
+ * timeout while waiting for FW response.
+ */
+#define MLXBF_I2C_SMBUS_EN_FW_TIMEOUT 0x31c
+
+/* SMBus master GW control bits offset in MLXBF_I2C_SMBUS_MASTER_GW[31:3]. */
+#define MLXBF_I2C_MASTER_LOCK_BIT         BIT(31) /* Lock bit. */
+#define MLXBF_I2C_MASTER_BUSY_BIT         BIT(30) /* Busy bit. */
+#define MLXBF_I2C_MASTER_START_BIT        BIT(29) /* Control start. */
+#define MLXBF_I2C_MASTER_CTL_WRITE_BIT    BIT(28) /* Control write phase. */
+#define MLXBF_I2C_MASTER_CTL_READ_BIT     BIT(19) /* Control read phase. */
+#define MLXBF_I2C_MASTER_STOP_BIT         BIT(3)  /* Control stop. */
+
+#define MLXBF_I2C_MASTER_ENABLE \
+	(MLXBF_I2C_MASTER_LOCK_BIT | MLXBF_I2C_MASTER_BUSY_BIT | \
+	 MLXBF_I2C_MASTER_START_BIT | MLXBF_I2C_MASTER_STOP_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_WRITE \
+	(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_WRITE_BIT)
+
+#define MLXBF_I2C_MASTER_ENABLE_READ \
+	(MLXBF_I2C_MASTER_ENABLE | MLXBF_I2C_MASTER_CTL_READ_BIT)
+
+#define MLXBF_I2C_MASTER_SLV_ADDR_SHIFT   12 /* Slave address shift. */
+#define MLXBF_I2C_MASTER_WRITE_SHIFT      21 /* Control write bytes shift. */
+#define MLXBF_I2C_MASTER_SEND_PEC_SHIFT   20 /* Send PEC byte shift. */
+#define MLXBF_I2C_MASTER_PARSE_EXP_SHIFT  11 /* Parse expected bytes shift. */
+#define MLXBF_I2C_MASTER_READ_SHIFT       4  /* Control read bytes shift. */
+
+/* SMBus master GW Data descriptor. */
+#define MLXBF_I2C_MASTER_DATA_DESC_ADDR   0x280
+#define MLXBF_I2C_MASTER_DATA_DESC_SIZE   0x80 /* Size in bytes. */
+
+/* Maximum bytes to read/write per SMBus transaction. */
+#define MLXBF_I2C_MASTER_DATA_R_LENGTH  MLXBF_I2C_MASTER_DATA_DESC_SIZE
+#define MLXBF_I2C_MASTER_DATA_W_LENGTH (MLXBF_I2C_MASTER_DATA_DESC_SIZE - 1)
+
+/* All bytes were transmitted. */
+#define MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE      BIT(0)
+/* NACK received. */
+#define MLXBF_I2C_SMBUS_STATUS_NACK_RCV           BIT(1)
+/* Slave's byte count >128 bytes. */
+#define MLXBF_I2C_SMBUS_STATUS_READ_ERR           BIT(2)
+/* Timeout occurred. */
+#define MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT         BIT(3)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_MASK        GENMASK(3, 0)
+
+#define MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR \
+	(MLXBF_I2C_SMBUS_STATUS_NACK_RCV | \
+	 MLXBF_I2C_SMBUS_STATUS_READ_ERR | \
+	 MLXBF_I2C_SMBUS_STATUS_FW_TIMEOUT)
+
+#define MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK      BIT(31)
+#define MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK  BIT(15)
+
+/* SMBus slave GW. */
+#define MLXBF_I2C_SMBUS_SLAVE_GW              0x400
+/* Number of bytes received and sent from/to master. */
+#define MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES 0x500
+/* Packet error check (PEC) value. */
+#define MLXBF_I2C_SMBUS_SLAVE_PEC             0x504
+/* SMBus slave Finite State Machine (FSM). */
+#define MLXBF_I2C_SMBUS_SLAVE_FSM             0x510
+/*
+ * Should be set when all raised causes handled, and cleared by HW on
+ * every new cause.
+ */
+#define MLXBF_I2C_SMBUS_SLAVE_READY           0x52c
+
+/* SMBus slave GW control bits offset in MLXBF_I2C_SMBUS_SLAVE_GW[31:19]. */
+#define MLXBF_I2C_SLAVE_BUSY_BIT         BIT(30) /* Busy bit. */
+#define MLXBF_I2C_SLAVE_WRITE_BIT        BIT(29) /* Control write enable. */
+
+#define MLXBF_I2C_SLAVE_ENABLE \
+	(MLXBF_I2C_SLAVE_BUSY_BIT | MLXBF_I2C_SLAVE_WRITE_BIT)
+
+#define MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT 22 /* Number of bytes to write. */
+#define MLXBF_I2C_SLAVE_SEND_PEC_SHIFT    21 /* Send PEC byte shift. */
+
+/* SMBus slave GW Data descriptor. */
+#define MLXBF_I2C_SLAVE_DATA_DESC_ADDR   0x480
+#define MLXBF_I2C_SLAVE_DATA_DESC_SIZE   0x80 /* Size in bytes. */
+
+/* SMbus slave configuration registers. */
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG        0x514
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT        16
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT     7
+#define MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK       GENMASK(6, 0)
+
+#define MLXBF_I2C_SLAVE_ADDR_ENABLED(addr) \
+	((addr) & (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT))
+
+/*
+ * Timeout is given in microsends. Note also that timeout handling is not
+ * exact.
+ */
+#define MLXBF_I2C_SMBUS_TIMEOUT   (300 * 1000) /* 300ms */
+
+/* Encapsulates timing parameters. */
+struct mlxbf_i2c_timings {
+	u16 scl_high;		/* Clock high period. */
+	u16 scl_low;		/* Clock low period. */
+	u8 sda_rise;		/* Data rise time. */
+	u8 sda_fall;		/* Data fall time. */
+	u8 scl_rise;		/* Clock rise time. */
+	u8 scl_fall;		/* Clock fall time. */
+	u16 hold_start;		/* Hold time after (REPEATED) START. */
+	u16 hold_data;		/* Data hold time. */
+	u16 setup_start;	/* REPEATED START condition setup time. */
+	u16 setup_stop;		/* STOP condition setup time. */
+	u16 setup_data;		/* Data setup time. */
+	u16 pad;		/* Padding. */
+	u16 buf;		/* Bus free time between STOP and START. */
+	u16 thigh_max;		/* Thigh max. */
+	u32 timeout;		/* Detect clock low timeout. */
+};
+
+enum {
+	MLXBF_I2C_F_READ = BIT(0),
+	MLXBF_I2C_F_WRITE = BIT(1),
+	MLXBF_I2C_F_NORESTART = BIT(3),
+	MLXBF_I2C_F_SMBUS_OPERATION = BIT(4),
+	MLXBF_I2C_F_SMBUS_BLOCK = BIT(5),
+	MLXBF_I2C_F_SMBUS_PEC = BIT(6),
+	MLXBF_I2C_F_SMBUS_PROCESS_CALL = BIT(7),
+};
+
+struct mlxbf_i2c_smbus_operation {
+	u32 flags;
+	u32 length; /* Buffer length in bytes. */
+	u8 *buffer;
+};
+
+#define MLXBF_I2C_SMBUS_OP_CNT_1	1
+#define MLXBF_I2C_SMBUS_OP_CNT_2	2
+#define MLXBF_I2C_SMBUS_OP_CNT_3	3
+#define MLXBF_I2C_SMBUS_MAX_OP_CNT	MLXBF_I2C_SMBUS_OP_CNT_3
+
+struct mlxbf_i2c_smbus_request {
+	u8 slave;
+	u8 operation_cnt;
+	struct mlxbf_i2c_smbus_operation operation[MLXBF_I2C_SMBUS_MAX_OP_CNT];
+};
+
+struct mlxbf_i2c_resource {
+	void __iomem *io;
+	struct resource *params;
+	struct mutex *lock; /* Mutex to protect mlxbf_i2c_resource. */
+	u8 type;
+};
+
+/* List of chip resources that are being accessed by the driver. */
+enum {
+	MLXBF_I2C_SMBUS_RES,
+	MLXBF_I2C_MST_CAUSE_RES,
+	MLXBF_I2C_SLV_CAUSE_RES,
+	MLXBF_I2C_COALESCE_RES,
+	MLXBF_I2C_COREPLL_RES,
+	MLXBF_I2C_GPIO_RES,
+	MLXBF_I2C_END_RES,
+};
+
+/* Helper macro to define an I2C resource parameters. */
+#define MLXBF_I2C_RES_PARAMS(addr, size, str) \
+	{ \
+		.start = (addr), \
+		.end = (addr) + (size) - 1, \
+		.name = (str) \
+	}
+
+static struct resource mlxbf_i2c_coalesce_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COALESCE_TYU_ADDR,
+				     MLXBF_I2C_COALESCE_TYU_SIZE,
+				     "COALESCE_MEM");
+static struct resource mlxbf_i2c_corepll_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_TYU_ADDR,
+				     MLXBF_I2C_COREPLL_TYU_SIZE,
+				     "COREPLL_MEM");
+static struct resource mlxbf_i2c_corepll_yu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_COREPLL_YU_ADDR,
+				     MLXBF_I2C_COREPLL_YU_SIZE,
+				     "COREPLL_MEM");
+static struct resource mlxbf_i2c_gpio_tyu_params =
+		MLXBF_I2C_RES_PARAMS(MLXBF_I2C_GPIO_TYU_ADDR,
+				     MLXBF_I2C_GPIO_TYU_SIZE,
+				     "GPIO_MEM");
+
+static struct mutex mlxbf_i2c_coalesce_lock;
+static struct mutex mlxbf_i2c_corepll_lock;
+static struct mutex mlxbf_i2c_gpio_lock;
+
+/* Mellanox BlueField chip type. */
+enum mlxbf_i2c_chip_type {
+	MLXBF_I2C_CHIP_TYPE_1, /* Mellanox BlueField-1 chip. */
+	MLXBF_I2C_CHIP_TYPE_2, /* Mallanox BlueField-2 chip. */
+};
+
+struct mlxbf_i2c_chip_info {
+	enum mlxbf_i2c_chip_type type;
+	/* Chip shared resources that are being used by the I2C controller. */
+	struct mlxbf_i2c_resource *shared_res[MLXBF_I2C_SHARED_RES_MAX];
+
+	/* Callback to calculate the core PLL frequency. */
+	u64 (*calculate_freq)(struct mlxbf_i2c_resource *corepll_res);
+};
+
+struct mlxbf_i2c_priv {
+	const struct mlxbf_i2c_chip_info *chip;
+	struct i2c_adapter adap;
+	struct mlxbf_i2c_resource *smbus;
+	struct mlxbf_i2c_resource *mst_cause;
+	struct mlxbf_i2c_resource *slv_cause;
+	struct mlxbf_i2c_resource *coalesce;
+	u64 frequency; /* Core frequency in Hz. */
+	int bus; /* Physical bus identifier. */
+	int irq;
+	struct i2c_client *slave;
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_coalesce_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_coalesce_tyu_params,
+		.lock = &mlxbf_i2c_coalesce_lock,
+		.type = MLXBF_I2C_COALESCE_RES
+	},
+	{}
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_corepll_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_corepll_tyu_params,
+		.lock = &mlxbf_i2c_corepll_lock,
+		.type = MLXBF_I2C_COREPLL_RES
+	},
+	[MLXBF_I2C_CHIP_TYPE_2] = {
+		.params = &mlxbf_i2c_corepll_yu_params,
+		.lock = &mlxbf_i2c_corepll_lock,
+		.type = MLXBF_I2C_COREPLL_RES,
+	}
+};
+
+static struct mlxbf_i2c_resource mlxbf_i2c_gpio_res[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.params = &mlxbf_i2c_gpio_tyu_params,
+		.lock = &mlxbf_i2c_gpio_lock,
+		.type = MLXBF_I2C_GPIO_RES
+	},
+	{}
+};
+
+static u8 mlxbf_i2c_bus_count;
+
+static struct mutex mlxbf_i2c_bus_lock;
+
+/* Polling frequency in microseconds. */
+#define MLXBF_I2C_POLL_FREQ_IN_USEC        200
+
+#define MLXBF_I2C_SHIFT_0   0
+#define MLXBF_I2C_SHIFT_8   8
+#define MLXBF_I2C_SHIFT_16  16
+#define MLXBF_I2C_SHIFT_24  24
+
+#define MLXBF_I2C_MASK_8    GENMASK(7, 0)
+#define MLXBF_I2C_MASK_16   GENMASK(15, 0)
+
+#define MLXBF_I2C_FREQUENCY_1GHZ  1000000000
+
+static void mlxbf_i2c_write(void __iomem *io, int reg, u32 val)
+{
+	writel(val, io + reg);
+}
+
+static u32 mlxbf_i2c_read(void __iomem *io, int reg)
+{
+	return readl(io + reg);
+}
+
+/*
+ * This function is used to read data from Master GW Data Descriptor.
+ * Data bytes in the Master GW Data Descriptor are shifted left so the
+ * data starts at the MSB of the descriptor registers as set by the
+ * underlying hardware. TYU_READ_DATA enables byte swapping while
+ * reading data bytes, and MUST be called by the SMBus read routines
+ * to copy data from the 32 * 32-bit HW Data registers a.k.a Master GW
+ * Data Descriptor.
+ */
+static u32 mlxbf_i2c_read_data(void __iomem *io, int reg)
+{
+	return (u32)be32_to_cpu(mlxbf_i2c_read(io, reg));
+}
+
+/*
+ * This function is used to write data to the Master GW Data Descriptor.
+ * Data copied to the Master GW Data Descriptor MUST be shifted left so
+ * the data starts at the MSB of the descriptor registers as required by
+ * the underlying hardware. TYU_WRITE_DATA enables byte swapping when
+ * writing data bytes, and MUST be called by the SMBus write routines to
+ * copy data to the 32 * 32-bit HW Data registers a.k.a Master GW Data
+ * Descriptor.
+ */
+static void mlxbf_i2c_write_data(void __iomem *io, int reg, u32 val)
+{
+	mlxbf_i2c_write(io, reg, (u32)cpu_to_be32(val));
+}
+
+/*
+ * Function to poll a set of bits at a specific address; it checks whether
+ * the bits are equal to zero when eq_zero is set to 'true', and not equal
+ * to zero when eq_zero is set to 'false'.
+ * Note that the timeout is given in microseconds.
+ */
+static u32 mlxbf_smbus_poll(void __iomem *io, u32 addr, u32 mask,
+			    bool eq_zero, u32  timeout)
+{
+	u32 bits;
+
+	timeout = (timeout / MLXBF_I2C_POLL_FREQ_IN_USEC) + 1;
+
+	do {
+		bits = mlxbf_i2c_read(io, addr) & mask;
+		if (eq_zero ? bits == 0 : bits != 0)
+			return eq_zero ? 1 : bits;
+		udelay(MLXBF_I2C_POLL_FREQ_IN_USEC);
+	} while (timeout-- != 0);
+
+	return 0;
+}
+
+/*
+ * SW must make sure that the SMBus Master GW is idle before starting
+ * a transaction. Accordingly, this function polls the Master FSM stop
+ * bit; it returns false when the bit is asserted, true if not.
+ */
+static bool mlxbf_smbus_master_wait_for_idle(struct mlxbf_i2c_priv *priv)
+{
+	u32 mask = MLXBF_I2C_SMBUS_MASTER_FSM_STOP_MASK;
+	u32 addr = MLXBF_I2C_SMBUS_MASTER_FSM;
+	u32 timeout = MLXBF_I2C_SMBUS_TIMEOUT;
+
+	if (mlxbf_smbus_poll(priv->smbus->io, addr, mask, true, timeout))
+		return true;
+
+	return false;
+}
+
+static bool mlxbf_i2c_smbus_transaction_success(u32 master_status,
+						u32 cause_status)
+{
+	/*
+	 * When transaction ended with STOP, all bytes were transmitted,
+	 * and no NACK received, then the transaction ended successfully.
+	 * On the other hand, when the GW is configured with the stop bit
+	 * de-asserted then the SMBus expects the following GW configuration
+	 * for transfer continuation.
+	 */
+	if ((cause_status & MLXBF_I2C_CAUSE_WAIT_FOR_FW_DATA) ||
+	    ((cause_status & MLXBF_I2C_CAUSE_TRANSACTION_ENDED) &&
+	     (master_status & MLXBF_I2C_SMBUS_STATUS_BYTE_CNT_DONE) &&
+	     !(master_status & MLXBF_I2C_SMBUS_STATUS_NACK_RCV)))
+		return true;
+
+	return false;
+}
+
+/*
+ * Poll SMBus master status and return transaction status,
+ * i.e. whether succeeded or failed. I2C and SMBus fault codes
+ * are returned as negative numbers from most calls, with zero
+ * or some positive number indicating a non-fault return.
+ */
+static int mlxbf_i2c_smbus_check_status(struct mlxbf_i2c_priv *priv)
+{
+	u32 master_status_bits;
+	u32 cause_status_bits;
+
+	/*
+	 * GW busy bit is raised by the driver and cleared by the HW
+	 * when the transaction is completed. The busy bit is a good
+	 * indicator of transaction status. So poll the busy bit, and
+	 * then read the cause and master status bits to determine if
+	 * errors occurred during the transaction.
+	 */
+	mlxbf_smbus_poll(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW,
+			 MLXBF_I2C_MASTER_BUSY_BIT, true,
+			 MLXBF_I2C_SMBUS_TIMEOUT);
+
+	/* Read cause status bits. */
+	cause_status_bits = mlxbf_i2c_read(priv->mst_cause->io,
+					   MLXBF_I2C_CAUSE_ARBITER);
+	cause_status_bits &= MLXBF_I2C_CAUSE_MASTER_ARBITER_BITS_MASK;
+
+	/*
+	 * Parse both Cause and Master GW bits, then return transaction status.
+	 */
+
+	master_status_bits = mlxbf_i2c_read(priv->smbus->io,
+					    MLXBF_I2C_SMBUS_MASTER_STATUS);
+	master_status_bits &= MLXBF_I2C_SMBUS_MASTER_STATUS_MASK;
+
+	if (mlxbf_i2c_smbus_transaction_success(master_status_bits,
+						cause_status_bits))
+		return 0;
+
+	/*
+	 * In case of timeout on GW busy, the ISR will clear busy bit but
+	 * transaction ended bits cause will not be set so the transaction
+	 * fails. Then, we must check Master GW status bits.
+	 */
+	if ((master_status_bits & MLXBF_I2C_SMBUS_MASTER_STATUS_ERROR) &&
+	    (cause_status_bits & (MLXBF_I2C_CAUSE_TRANSACTION_ENDED |
+				  MLXBF_I2C_CAUSE_M_GW_BUSY_FALL)))
+		return -EIO;
+
+	if (cause_status_bits & MLXBF_I2C_CAUSE_MASTER_STATUS_ERROR)
+		return -EAGAIN;
+
+	return -ETIMEDOUT;
+}
+
+static void mlxbf_i2c_smbus_write_data(struct mlxbf_i2c_priv *priv,
+				       const u8 *data, u8 length, u32 addr)
+{
+	u8 offset, aligned_length;
+	u32 data32;
+
+	aligned_length = round_up(length, 4);
+
+	/* Copy data bytes from 4-byte aligned source buffer. */
+	for (offset = 0; offset < aligned_length; offset += sizeof(u32)) {
+		data32 = *((u32 *)(data + offset));
+		mlxbf_i2c_write_data(priv->smbus->io, addr + offset, data32);
+	}
+}
+
+static void mlxbf_i2c_smbus_read_data(struct mlxbf_i2c_priv *priv,
+				      u8 *data, u8 length, u32 addr)
+{
+	u32 data32, mask;
+	u8 byte, offset;
+
+	mask = sizeof(u32) - 1;
+
+	for (offset = 0; offset < (length & ~mask); offset += sizeof(u32)) {
+		data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+		*((u32 *)(data + offset)) = data32;
+	}
+
+	if (!(length & mask))
+		return;
+
+	data32 = mlxbf_i2c_read_data(priv->smbus->io, addr + offset);
+
+	for (byte = 0; byte < (length & mask); byte++) {
+		data[offset + byte] = data32 & GENMASK(7, 0);
+		data32 = ror32(data32, MLXBF_I2C_SHIFT_8);
+	}
+}
+
+static int mlxbf_i2c_smbus_enable(struct mlxbf_i2c_priv *priv, u8 slave,
+				  u8 len, u8 block_en, u8 pec_en, bool read)
+{
+	u32 command;
+
+	/* Set Master GW control word. */
+	if (read) {
+		command = MLXBF_I2C_MASTER_ENABLE_READ;
+		command |= rol32(len, MLXBF_I2C_MASTER_READ_SHIFT);
+	} else {
+		command = MLXBF_I2C_MASTER_ENABLE_WRITE;
+		command |= rol32(len, MLXBF_I2C_MASTER_WRITE_SHIFT);
+	}
+	command |= rol32(slave, MLXBF_I2C_MASTER_SLV_ADDR_SHIFT);
+	command |= rol32(block_en, MLXBF_I2C_MASTER_PARSE_EXP_SHIFT);
+	command |= rol32(pec_en, MLXBF_I2C_MASTER_SEND_PEC_SHIFT);
+
+	/* Clear status bits. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_STATUS, 0x0);
+	/* Set the cause data. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+	/* Zero PEC byte. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_PEC, 0x0);
+	/* Zero byte count. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_RS_BYTES, 0x0);
+
+	/* GW activation. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_GW, command);
+
+	/*
+	 * Poll master status and check status bits. An ACK is sent when
+	 * completing writing data to the bus (Master 'byte_count_done' bit
+	 * is set to 1).
+	 */
+	return mlxbf_i2c_smbus_check_status(priv);
+}
+
+static int
+mlxbf_i2c_smbus_start_transaction(struct mlxbf_i2c_priv *priv,
+				  struct mlxbf_i2c_smbus_request *request)
+{
+	u8 data_desc[MLXBF_I2C_MASTER_DATA_DESC_SIZE] = { 0 };
+	u8 op_idx, data_idx, data_len, write_len, read_len;
+	struct mlxbf_i2c_smbus_operation *operation;
+	u8 read_en, write_en, block_en, pec_en;
+	u8 slave, flags, addr;
+	u8 *read_buf;
+	int ret = 0;
+
+	if (request->operation_cnt > MLXBF_I2C_SMBUS_MAX_OP_CNT)
+		return -EINVAL;
+
+	read_buf = NULL;
+	data_idx = 0;
+	read_en = 0;
+	write_en = 0;
+	write_len = 0;
+	read_len = 0;
+	block_en = 0;
+	pec_en = 0;
+	slave = request->slave & GENMASK(6, 0);
+	addr = slave << 1;
+
+	/* First of all, check whether the HW is idle. */
+	if (WARN_ON(!mlxbf_smbus_master_wait_for_idle(priv)))
+		return -EBUSY;
+
+	/* Set first byte. */
+	data_desc[data_idx++] = addr;
+
+	for (op_idx = 0; op_idx < request->operation_cnt; op_idx++) {
+		operation = &request->operation[op_idx];
+		flags = operation->flags;
+
+		/*
+		 * Note that read and write operations might be handled by a
+		 * single command. If the MLXBF_I2C_F_SMBUS_OPERATION is set
+		 * then write command byte and set the optional SMBus specific
+		 * bits such as block_en and pec_en. These bits MUST be
+		 * submitted by the first operation only.
+		 */
+		if (op_idx == 0 && flags & MLXBF_I2C_F_SMBUS_OPERATION) {
+			block_en = flags & MLXBF_I2C_F_SMBUS_BLOCK;
+			pec_en = flags & MLXBF_I2C_F_SMBUS_PEC;
+		}
+
+		if (flags & MLXBF_I2C_F_WRITE) {
+			write_en = 1;
+			write_len += operation->length;
+			memcpy(data_desc + data_idx,
+			       operation->buffer, operation->length);
+			data_idx += operation->length;
+		}
+		/*
+		 * We assume that read operations are performed only once per
+		 * SMBus transaction. *TBD* protect this statement so it won't
+		 * be executed twice? or return an error if we try to read more
+		 * than once?
+		 */
+		if (flags & MLXBF_I2C_F_READ) {
+			read_en = 1;
+			/* Subtract 1 as required by HW. */
+			read_len = operation->length - 1;
+			read_buf = operation->buffer;
+		}
+	}
+
+	/* Set Master GW data descriptor. */
+	data_len = write_len + 1; /* Add one byte of the slave address. */
+	/*
+	 * Note that data_len cannot be 0. Indeed, the slave address byte
+	 * must be written to the data registers.
+	 */
+	mlxbf_i2c_smbus_write_data(priv, (const u8 *)data_desc, data_len,
+				   MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+
+	if (write_en) {
+		ret = mlxbf_i2c_smbus_enable(priv, slave, write_len, block_en,
+					 pec_en, 0);
+		if (ret)
+			return ret;
+	}
+
+	if (read_en) {
+		/* Write slave address to Master GW data descriptor. */
+		mlxbf_i2c_smbus_write_data(priv, (const u8 *)&addr, 1,
+					   MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+		ret = mlxbf_i2c_smbus_enable(priv, slave, read_len, block_en,
+					 pec_en, 1);
+		if (!ret) {
+			/* Get Master GW data descriptor. */
+			mlxbf_i2c_smbus_read_data(priv, data_desc, read_len + 1,
+					     MLXBF_I2C_MASTER_DATA_DESC_ADDR);
+
+			/* Get data from Master GW data descriptor. */
+			memcpy(read_buf, data_desc, read_len + 1);
+		}
+
+		/*
+		 * After a read operation the SMBus FSM ps (present state)
+		 * needs to be 'manually' reset. This should be removed in
+		 * next tag integration.
+		 */
+		mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_MASTER_FSM,
+				MLXBF_I2C_SMBUS_MASTER_FSM_PS_STATE_MASK);
+	}
+
+	return ret;
+}
+
+/* I2C SMBus protocols. */
+
+static void
+mlxbf_i2c_smbus_quick_command(struct mlxbf_i2c_smbus_request *request,
+			      u8 read)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+	request->operation[0].length = 0;
+	request->operation[0].flags = MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= read ? MLXBF_I2C_F_READ : 0;
+}
+
+static void mlxbf_i2c_smbus_byte_func(struct mlxbf_i2c_smbus_request *request,
+				      u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_1;
+
+	request->operation[0].length = 1;
+	request->operation[0].length += pec_check;
+
+	request->operation[0].flags = MLXBF_I2C_F_SMBUS_OPERATION;
+	request->operation[0].flags |= read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+
+	request->operation[0].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_byte_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 1;
+	request->operation[1].length += pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_data_word_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 2;
+	request->operation[1].length += pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_i2c_block_func(struct mlxbf_i2c_smbus_request *request,
+			       u8 *command, u8 *data, u8 *data_len, bool read,
+			       bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	/*
+	 * As specified in the standard, the max number of bytes to read/write
+	 * per block operation is 32 bytes. In Golan code, the controller can
+	 * read up to 128 bytes and write up to 127 bytes.
+	 */
+	request->operation[1].length =
+	    (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	/*
+	 * Skip the first data byte, which corresponds to the number of bytes
+	 * to read/write.
+	 */
+	request->operation[1].buffer = data + 1;
+
+	*data_len = request->operation[1].length;
+
+	/* Set the number of byte to read. This will be used by userspace. */
+	if (read)
+		data[0] = *data_len;
+}
+
+static void mlxbf_i2c_smbus_block_func(struct mlxbf_i2c_smbus_request *request,
+				       u8 *command, u8 *data, u8 *data_len,
+				       bool read, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_2;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length =
+	    (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+	request->operation[1].flags = read ?
+				MLXBF_I2C_F_READ : MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data + 1;
+
+	*data_len = request->operation[1].length;
+
+	/* Set the number of bytes to read. This will be used by userspace. */
+	if (read)
+		data[0] = *data_len;
+}
+
+static void
+mlxbf_i2c_smbus_process_call_func(struct mlxbf_i2c_smbus_request *request,
+				  u8 *command, u8 *data, bool pec_check)
+{
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= pec_check ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	request->operation[1].length = 2;
+	request->operation[1].flags = MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+
+	request->operation[2].length = 3;
+	request->operation[2].flags = MLXBF_I2C_F_READ;
+	request->operation[2].buffer = data;
+}
+
+static void
+mlxbf_i2c_smbus_blk_process_call_func(struct mlxbf_i2c_smbus_request *request,
+				      u8 *command, u8 *data, u8 *data_len,
+				      bool pec_check)
+{
+	u32 length;
+
+	request->operation_cnt = MLXBF_I2C_SMBUS_OP_CNT_3;
+
+	request->operation[0].length = 1;
+	request->operation[0].flags =
+			MLXBF_I2C_F_SMBUS_OPERATION | MLXBF_I2C_F_WRITE;
+	request->operation[0].flags |= MLXBF_I2C_F_SMBUS_BLOCK;
+	request->operation[0].flags |= (pec_check) ? MLXBF_I2C_F_SMBUS_PEC : 0;
+	request->operation[0].buffer = command;
+
+	length = (*data_len + pec_check > I2C_SMBUS_BLOCK_MAX) ?
+	    I2C_SMBUS_BLOCK_MAX : *data_len + pec_check;
+
+	request->operation[1].length = length - pec_check;
+	request->operation[1].flags = MLXBF_I2C_F_WRITE;
+	request->operation[1].buffer = data;
+
+	request->operation[2].length = length;
+	request->operation[2].flags = MLXBF_I2C_F_READ;
+	request->operation[2].buffer = data;
+
+	*data_len = length; /* including PEC byte. */
+}
+
+/* Initialization functions. */
+
+static bool mlxbf_i2c_has_chip_type(struct mlxbf_i2c_priv *priv, u8 type)
+{
+	return priv->chip->type == type;
+}
+
+static struct mlxbf_i2c_resource *
+mlxbf_i2c_get_shared_resource(struct mlxbf_i2c_priv *priv, u8 type)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	struct mlxbf_i2c_resource *res;
+	u8 res_idx = 0;
+
+	for (res_idx = 0; res_idx < MLXBF_I2C_SHARED_RES_MAX; res_idx++) {
+		res = chip->shared_res[res_idx];
+		if (res && res->type == type)
+			return res;
+	}
+
+	return NULL;
+}
+
+static int mlxbf_i2c_init_resource(struct platform_device *pdev,
+				   struct mlxbf_i2c_resource **res,
+				   u8 type)
+{
+	struct mlxbf_i2c_resource *tmp_res;
+	struct device *dev = &pdev->dev;
+
+	if (!res || *res || type >= MLXBF_I2C_END_RES)
+		return -EINVAL;
+
+	tmp_res = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_resource),
+			       GFP_KERNEL);
+	if (!tmp_res)
+		return -ENOMEM;
+
+	tmp_res->params = platform_get_resource(pdev, IORESOURCE_MEM, type);
+	if (!tmp_res->params) {
+		devm_kfree(dev, tmp_res);
+		return -EIO;
+	}
+
+	tmp_res->io = devm_ioremap_resource(dev, tmp_res->params);
+	if (IS_ERR(tmp_res->io)) {
+		devm_kfree(dev, tmp_res);
+		return PTR_ERR(tmp_res->io);
+	}
+
+	tmp_res->type = type;
+
+	*res = tmp_res;
+
+	return 0;
+}
+
+static u32 mlxbf_i2c_get_ticks(struct mlxbf_i2c_priv *priv, u64 nanoseconds,
+			       bool minimum)
+{
+	u64 frequency;
+	u32 ticks;
+
+	/*
+	 * Compute ticks as follow:
+	 *
+	 *           Ticks
+	 * Time = --------- x 10^9    =>    Ticks = Time x Frequency x 10^-9
+	 *         Frequency
+	 */
+	frequency = priv->frequency;
+	ticks = (nanoseconds * frequency) / MLXBF_I2C_FREQUENCY_1GHZ;
+	/*
+	 * The number of ticks is rounded down and if minimum is equal to 1
+	 * then add one tick.
+	 */
+	if (minimum)
+		ticks++;
+
+	return ticks;
+}
+
+static u32 mlxbf_i2c_set_timer(struct mlxbf_i2c_priv *priv, u64 nsec, bool opt,
+			       u32 mask, u8 shift)
+{
+	u32 val = (mlxbf_i2c_get_ticks(priv, nsec, opt) & mask) << shift;
+
+	return val;
+}
+
+static void mlxbf_i2c_set_timings(struct mlxbf_i2c_priv *priv,
+				  const struct mlxbf_i2c_timings *timings)
+{
+	u32 timer;
+
+	timer = mlxbf_i2c_set_timer(priv, timings->scl_high,
+				    false, MLXBF_I2C_MASK_16,
+				    MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_low,
+				     false, MLXBF_I2C_MASK_16,
+				     MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_SCL_LOW_SCL_HIGH,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->sda_rise, false,
+				    MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->sda_fall, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_8);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_rise, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_16);
+	timer |= mlxbf_i2c_set_timer(priv, timings->scl_fall, false,
+				     MLXBF_I2C_MASK_8, MLXBF_I2C_SHIFT_24);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_FALL_RISE_SPIKE,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->hold_start, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->hold_data, true,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_THOLD, timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->setup_start, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->setup_stop, true,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_TIMER_TSETUP_START_STOP, timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->setup_data, true,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_TIMER_TSETUP_DATA,
+			  timer);
+
+	timer = mlxbf_i2c_set_timer(priv, timings->buf, false,
+				    MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_0);
+	timer |= mlxbf_i2c_set_timer(priv, timings->thigh_max, false,
+				     MLXBF_I2C_MASK_16, MLXBF_I2C_SHIFT_16);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_THIGH_MAX_TBUF,
+			timer);
+
+	timer = timings->timeout;
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SCL_LOW_TIMEOUT,
+			timer);
+}
+
+enum mlxbf_i2c_timings_config {
+	MLXBF_I2C_TIMING_CONFIG_100KHZ,
+	MLXBF_I2C_TIMING_CONFIG_400KHZ,
+	MLXBF_I2C_TIMING_CONFIG_1000KHZ,
+};
+
+/*
+ * Note that the mlxbf_i2c_timings->timeout value is not related to the
+ * bus frequency, it is impacted by the time it takes the driver to
+ * complete data transmission before transaction abort.
+ */
+static const struct mlxbf_i2c_timings mlxbf_i2c_timings[] = {
+	[MLXBF_I2C_TIMING_CONFIG_100KHZ] = {
+		.scl_high = 4810,
+		.scl_low = 5000,
+		.hold_start = 4000,
+		.setup_start = 4800,
+		.setup_stop = 4000,
+		.setup_data = 250,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	},
+	[MLXBF_I2C_TIMING_CONFIG_400KHZ] = {
+		.scl_high = 1011,
+		.scl_low = 1300,
+		.hold_start = 600,
+		.setup_start = 700,
+		.setup_stop = 600,
+		.setup_data = 100,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	},
+	[MLXBF_I2C_TIMING_CONFIG_1000KHZ] = {
+		.scl_high = 600,
+		.scl_low = 1300,
+		.hold_start = 600,
+		.setup_start = 600,
+		.setup_stop = 600,
+		.setup_data = 100,
+		.sda_rise = 50,
+		.sda_fall = 50,
+		.scl_rise = 50,
+		.scl_fall = 50,
+		.hold_data = 300,
+		.buf = 20000,
+		.thigh_max = 5000,
+		.timeout = 106500
+	}
+};
+
+static int mlxbf_i2c_init_timings(struct platform_device *pdev,
+				  struct mlxbf_i2c_priv *priv)
+{
+	enum mlxbf_i2c_timings_config config_idx;
+	struct device *dev = &pdev->dev;
+	u32 config_khz;
+
+	int ret;
+
+	ret = device_property_read_u32(dev, "clock-frequency", &config_khz);
+	if (ret < 0)
+		config_khz = MLXBF_I2C_TIMING_100KHZ;
+
+	switch (config_khz) {
+	default:
+		/* Default settings is 100 KHz. */
+		pr_warn("Illegal value %d: defaulting to 100 KHz\n",
+			config_khz);
+		fallthrough;
+	case MLXBF_I2C_TIMING_100KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_100KHZ;
+		break;
+
+	case MLXBF_I2C_TIMING_400KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_400KHZ;
+		break;
+
+	case MLXBF_I2C_TIMING_1000KHZ:
+		config_idx = MLXBF_I2C_TIMING_CONFIG_1000KHZ;
+		break;
+	}
+
+	mlxbf_i2c_set_timings(priv, &mlxbf_i2c_timings[config_idx]);
+
+	return 0;
+}
+
+static int mlxbf_i2c_get_gpio(struct platform_device *pdev,
+			      struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	struct resource	*params;
+	resource_size_t size;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return -EPERM;
+
+	/*
+	 * The GPIO region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region and/or setting up the GPIO.
+	 */
+	lockdep_assert_held(gpio_res->lock);
+
+	/* Check whether the memory map exist. */
+	if (gpio_res->io)
+		return 0;
+
+	params = gpio_res->params;
+	size = resource_size(params);
+
+	if (!devm_request_mem_region(dev, params->start, size, params->name))
+		return -EFAULT;
+
+	gpio_res->io = devm_ioremap(dev, params->start, size);
+	if (IS_ERR(gpio_res->io)) {
+		devm_release_mem_region(dev, params->start, size);
+		return PTR_ERR(gpio_res->io);
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_release_gpio(struct platform_device *pdev,
+				  struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	struct resource	*params;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return 0;
+
+	mutex_lock(gpio_res->lock);
+
+	if (gpio_res->io) {
+		/* Release the GPIO resource. */
+		params = gpio_res->params;
+		devm_iounmap(dev, gpio_res->io);
+		devm_release_mem_region(dev, params->start,
+					resource_size(params));
+	}
+
+	mutex_unlock(gpio_res->lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_get_corepll(struct platform_device *pdev,
+				 struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+	resource_size_t size;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+	if (!corepll_res)
+		return -EPERM;
+
+	/*
+	 * The COREPLL region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region.
+	 */
+	lockdep_assert_held(corepll_res->lock);
+
+	/* Check whether the memory map exist. */
+	if (corepll_res->io)
+		return 0;
+
+	params = corepll_res->params;
+	size = resource_size(params);
+
+	if (!devm_request_mem_region(dev, params->start, size, params->name))
+		return -EFAULT;
+
+	corepll_res->io = devm_ioremap(dev, params->start, size);
+	if (IS_ERR(corepll_res->io)) {
+		devm_release_mem_region(dev, params->start, size);
+		return PTR_ERR(corepll_res->io);
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_release_corepll(struct platform_device *pdev,
+				     struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+
+	mutex_lock(corepll_res->lock);
+
+	if (corepll_res->io) {
+		/* Release the CorePLL resource. */
+		params = corepll_res->params;
+		devm_iounmap(dev, corepll_res->io);
+		devm_release_mem_region(dev, params->start,
+					resource_size(params));
+	}
+
+	mutex_unlock(corepll_res->lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_master(struct platform_device *pdev,
+				 struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *gpio_res;
+	struct device *dev = &pdev->dev;
+	u32 config_reg;
+	int ret;
+
+	/* This configuration is only needed for BlueField 1. */
+	if (!mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1))
+		return 0;
+
+	gpio_res = mlxbf_i2c_get_shared_resource(priv, MLXBF_I2C_GPIO_RES);
+	if (!gpio_res)
+		return -EPERM;
+
+	/*
+	 * The GPIO region in TYU space is shared among I2C busses.
+	 * This function MUST be serialized to avoid racing when
+	 * claiming the memory region and/or setting up the GPIO.
+	 */
+
+	mutex_lock(gpio_res->lock);
+
+	ret = mlxbf_i2c_get_gpio(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get gpio resource");
+		mutex_unlock(gpio_res->lock);
+		return ret;
+	}
+
+	/*
+	 * TYU - Configuration for GPIO pins. Those pins must be asserted in
+	 * MLXBF_I2C_GPIO_0_FUNC_EN_0, i.e. GPIO 0 is controlled by HW, and must
+	 * be reset in MLXBF_I2C_GPIO_0_FORCE_OE_EN, i.e. GPIO_OE will be driven
+	 * instead of HW_OE.
+	 * For now, we do not reset the GPIO state when the driver is removed.
+	 * First, it is not necessary to disable the bus since we are using
+	 * the same busses. Then, some busses might be shared among Linux and
+	 * platform firmware; disabling the bus might compromise the system
+	 * functionality.
+	 */
+	config_reg = mlxbf_i2c_read(gpio_res->io,
+				    MLXBF_I2C_GPIO_0_FUNC_EN_0);
+	config_reg = MLXBF_I2C_GPIO_SMBUS_GW_ASSERT_PINS(priv->bus,
+							 config_reg);
+	mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FUNC_EN_0,
+			config_reg);
+
+	config_reg = mlxbf_i2c_read(gpio_res->io,
+				    MLXBF_I2C_GPIO_0_FORCE_OE_EN);
+	config_reg = MLXBF_I2C_GPIO_SMBUS_GW_RESET_PINS(priv->bus,
+							config_reg);
+	mlxbf_i2c_write(gpio_res->io, MLXBF_I2C_GPIO_0_FORCE_OE_EN,
+			config_reg);
+
+	mutex_unlock(gpio_res->lock);
+
+	return 0;
+}
+
+static u64 mlxbf_calculate_freq_from_tyu(struct mlxbf_i2c_resource *corepll_res)
+{
+	u64 core_frequency, pad_frequency;
+	u8 core_od, core_r;
+	u32 corepll_val;
+	u16 core_f;
+
+	pad_frequency = MLXBF_I2C_TYU_PLL_IN_FREQ;
+
+	corepll_val = mlxbf_i2c_read(corepll_res->io,
+				     MLXBF_I2C_CORE_PLL_REG1);
+
+	/* Get Core PLL configuration bits. */
+	core_f = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_F_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_F_TYU_MASK;
+	core_od = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_OD_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_OD_TYU_MASK;
+	core_r = rol32(corepll_val, MLXBF_I2C_COREPLL_CORE_R_TYU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_R_TYU_MASK;
+
+	/*
+	 * Compute PLL output frequency as follow:
+	 *
+	 *                                       CORE_F + 1
+	 * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+	 *                              (CORE_R + 1) * (CORE_OD + 1)
+	 *
+	 * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+	 * and PadFrequency, respectively.
+	 */
+	core_frequency = pad_frequency * (++core_f);
+	core_frequency /= (++core_r) * (++core_od);
+
+	return core_frequency;
+}
+
+static u64 mlxbf_calculate_freq_from_yu(struct mlxbf_i2c_resource *corepll_res)
+{
+	u32 corepll_reg1_val, corepll_reg2_val;
+	u64 corepll_frequency, pad_frequency;
+	u8 core_od, core_r;
+	u32 core_f;
+
+	pad_frequency = MLXBF_I2C_YU_PLL_IN_FREQ;
+
+	corepll_reg1_val = mlxbf_i2c_read(corepll_res->io,
+					  MLXBF_I2C_CORE_PLL_REG1);
+	corepll_reg2_val = mlxbf_i2c_read(corepll_res->io,
+					  MLXBF_I2C_CORE_PLL_REG2);
+
+	/* Get Core PLL configuration bits */
+	core_f = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_F_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_F_YU_MASK;
+	core_r = rol32(corepll_reg1_val, MLXBF_I2C_COREPLL_CORE_R_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_R_YU_MASK;
+	core_od = rol32(corepll_reg2_val,  MLXBF_I2C_COREPLL_CORE_OD_YU_SHIFT) &
+			MLXBF_I2C_COREPLL_CORE_OD_YU_MASK;
+
+	/*
+	 * Compute PLL output frequency as follow:
+	 *
+	 *                                     CORE_F / 16384
+	 * PLL_OUT_FREQ = PLL_IN_FREQ * ----------------------------
+	 *                              (CORE_R + 1) * (CORE_OD + 1)
+	 *
+	 * Where PLL_OUT_FREQ and PLL_IN_FREQ refer to CoreFrequency
+	 * and PadFrequency, respectively.
+	 */
+	corepll_frequency = (pad_frequency * core_f) / MLNXBF_I2C_COREPLL_CONST;
+	corepll_frequency /= (++core_r) * (++core_od);
+
+	return corepll_frequency;
+}
+
+static int mlxbf_i2c_calculate_corepll_freq(struct platform_device *pdev,
+					    struct mlxbf_i2c_priv *priv)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	struct mlxbf_i2c_resource *corepll_res;
+	struct device *dev = &pdev->dev;
+	u64 *freq = &priv->frequency;
+	int ret;
+
+	corepll_res = mlxbf_i2c_get_shared_resource(priv,
+						    MLXBF_I2C_COREPLL_RES);
+	if (!corepll_res)
+		return -EPERM;
+
+	/*
+	 * First, check whether the TYU core Clock frequency is set.
+	 * The TYU core frequency is the same for all I2C busses; when
+	 * the first device gets probed the frequency is determined and
+	 * stored into a globally visible variable. So, first of all,
+	 * check whether the frequency is already set. Here, we assume
+	 * that the frequency is expected to be greater than 0.
+	 */
+	mutex_lock(corepll_res->lock);
+	if (!mlxbf_i2c_corepll_frequency) {
+		if (!chip->calculate_freq) {
+			mutex_unlock(corepll_res->lock);
+			return -EPERM;
+		}
+
+		ret = mlxbf_i2c_get_corepll(pdev, priv);
+		if (ret < 0) {
+			dev_err(dev, "Failed to get corePLL resource");
+			mutex_unlock(corepll_res->lock);
+			return ret;
+		}
+
+		mlxbf_i2c_corepll_frequency = chip->calculate_freq(corepll_res);
+	}
+	mutex_unlock(corepll_res->lock);
+
+	*freq = mlxbf_i2c_corepll_frequency;
+
+	return 0;
+}
+
+static int mlxbf_slave_enable(struct mlxbf_i2c_priv *priv, u8 addr)
+{
+	u32 slave_reg, slave_reg_tmp, slave_reg_avail, slave_addr_mask;
+	u8 reg, reg_cnt, byte, addr_tmp, reg_avail, byte_avail;
+	bool avail, disabled;
+
+	disabled = false;
+	avail = false;
+
+	if (!priv)
+		return -EPERM;
+
+	reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+	slave_addr_mask = MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
+
+	/*
+	 * Read the slave registers. There are 4 * 32-bit slave registers.
+	 * Each slave register can hold up to 4 * 8-bit slave configuration
+	 * (7-bit address, 1 status bit (1 if enabled, 0 if not)).
+	 */
+	for (reg = 0; reg < reg_cnt; reg++) {
+		slave_reg = mlxbf_i2c_read(priv->smbus->io,
+				MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+		/*
+		 * Each register holds 4 slave addresses. So, we have to keep
+		 * the byte order consistent with the value read in order to
+		 * update the register correctly, if needed.
+		 */
+		slave_reg_tmp = slave_reg;
+		for (byte = 0; byte < 4; byte++) {
+			addr_tmp = slave_reg_tmp & GENMASK(7, 0);
+
+			/*
+			 * Mark the first available slave address slot, i.e. its
+			 * enabled bit should be unset. This slot might be used
+			 * later on to register our slave.
+			 */
+			if (!avail && !MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp)) {
+				avail = true;
+				reg_avail = reg;
+				byte_avail = byte;
+				slave_reg_avail = slave_reg;
+			}
+
+			/*
+			 * Parse slave address bytes and check whether the
+			 * slave address already exists and it's enabled,
+			 * i.e. most significant bit is set.
+			 */
+			if ((addr_tmp & slave_addr_mask) == addr) {
+				if (MLXBF_I2C_SLAVE_ADDR_ENABLED(addr_tmp))
+					return 0;
+				disabled = true;
+				break;
+			}
+
+			/* Parse next byte. */
+			slave_reg_tmp >>= 8;
+		}
+
+		/* Exit the loop if the slave address is found. */
+		if (disabled)
+			break;
+	}
+
+	if (!avail && !disabled)
+		return -EINVAL; /* No room for a new slave address. */
+
+	if (avail && !disabled) {
+		reg = reg_avail;
+		byte = byte_avail;
+		/* Set the slave address. */
+		slave_reg_avail &= ~(slave_addr_mask << (byte * 8));
+		slave_reg_avail |= addr << (byte * 8);
+		slave_reg = slave_reg_avail;
+	}
+
+	/* Enable the slave address and update the register. */
+	slave_reg |= (1 << MLXBF_I2C_SMBUS_SLAVE_ADDR_EN_BIT) << (byte * 8);
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+
+	return 0;
+}
+
+static int mlxbf_slave_disable(struct mlxbf_i2c_priv *priv)
+{
+	u32 slave_reg, slave_reg_tmp, slave_addr_mask;
+	u8 addr, addr_tmp, reg, reg_cnt, slave_byte;
+	struct i2c_client *client = priv->slave;
+	bool exist;
+
+	exist = false;
+
+	addr = client->addr;
+	reg_cnt = MLXBF_I2C_SMBUS_SLAVE_ADDR_CNT >> 2;
+	slave_addr_mask = MLXBF_I2C_SMBUS_SLAVE_ADDR_MASK;
+
+	/*
+	 * Read the slave registers. There are 4 * 32-bit slave registers.
+	 * Each slave register can hold up to 4 * 8-bit slave configuration
+	 * (7-bit address, 1 status bit (1 if enabled, 0 if not)).
+	 */
+	for (reg = 0; reg < reg_cnt; reg++) {
+		slave_reg = mlxbf_i2c_read(priv->smbus->io,
+				MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4);
+
+		/* Check whether the address slots are empty. */
+		if (slave_reg == 0)
+			continue;
+
+		/*
+		 * Each register holds 4 slave addresses. So, we have to keep
+		 * the byte order consistent with the value read in order to
+		 * update the register correctly, if needed.
+		 */
+		slave_reg_tmp = slave_reg;
+		slave_byte = 0;
+		while (slave_reg_tmp != 0) {
+			addr_tmp = slave_reg_tmp & slave_addr_mask;
+			/*
+			 * Parse slave address bytes and check whether the
+			 * slave address already exists.
+			 */
+			if (addr_tmp == addr) {
+				exist = true;
+				break;
+			}
+
+			/* Parse next byte. */
+			slave_reg_tmp >>= 8;
+			slave_byte += 1;
+		}
+
+		/* Exit the loop if the slave address is found. */
+		if (exist)
+			break;
+	}
+
+	if (!exist)
+		return 0; /* Slave is not registered, nothing to do. */
+
+	/* Cleanup the slave address slot. */
+	slave_reg &= ~(GENMASK(7, 0) << (slave_byte * 8));
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_ADDR_CFG + reg * 0x4, slave_reg);
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_coalesce(struct platform_device *pdev,
+				   struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *coalesce_res;
+	struct resource *params;
+	resource_size_t size;
+	int ret = 0;
+
+	/*
+	 * Unlike BlueField-1 platform, the coalesce registers is a dedicated
+	 * resource in the next generations of BlueField.
+	 */
+	if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+		coalesce_res = mlxbf_i2c_get_shared_resource(priv,
+						MLXBF_I2C_COALESCE_RES);
+		if (!coalesce_res)
+			return -EPERM;
+
+		/*
+		 * The Cause Coalesce group in TYU space is shared among
+		 * I2C busses. This function MUST be serialized to avoid
+		 * racing when claiming the memory region.
+		 */
+		lockdep_assert_held(mlxbf_i2c_gpio_res->lock);
+
+		/* Check whether the memory map exist. */
+		if (coalesce_res->io) {
+			priv->coalesce = coalesce_res;
+			return 0;
+		}
+
+		params = coalesce_res->params;
+		size = resource_size(params);
+
+		if (!request_mem_region(params->start, size, params->name))
+			return -EFAULT;
+
+		coalesce_res->io = ioremap(params->start, size);
+		if (IS_ERR(coalesce_res->io)) {
+			release_mem_region(params->start, size);
+			return PTR_ERR(coalesce_res->io);
+		}
+
+		priv->coalesce = coalesce_res;
+
+	} else {
+		ret = mlxbf_i2c_init_resource(pdev, &priv->coalesce,
+					      MLXBF_I2C_COALESCE_RES);
+	}
+
+	return ret;
+}
+
+static int mlxbf_i2c_release_coalesce(struct platform_device *pdev,
+				      struct mlxbf_i2c_priv *priv)
+{
+	struct mlxbf_i2c_resource *coalesce_res;
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+	resource_size_t size;
+
+	coalesce_res = priv->coalesce;
+
+	if (coalesce_res->io) {
+		params = coalesce_res->params;
+		size = resource_size(params);
+		if (mlxbf_i2c_has_chip_type(priv, MLXBF_I2C_CHIP_TYPE_1)) {
+			mutex_lock(coalesce_res->lock);
+			iounmap(coalesce_res->io);
+			release_mem_region(params->start, size);
+			mutex_unlock(coalesce_res->lock);
+		} else {
+			devm_release_mem_region(dev, params->start, size);
+		}
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_init_slave(struct platform_device *pdev,
+				struct mlxbf_i2c_priv *priv)
+{
+	struct device *dev = &pdev->dev;
+	u32 int_reg;
+	int ret;
+
+	/* Reset FSM. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_FSM, 0);
+
+	/*
+	 * Enable slave cause interrupt bits. Drive
+	 * MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE and
+	 * MLXBF_I2C_CAUSE_WRITE_SUCCESS, these are enabled when an external
+	 * masters issue a Read and Write, respectively. But, clear all
+	 * interrupts first.
+	 */
+	mlxbf_i2c_write(priv->slv_cause->io,
+			  MLXBF_I2C_CAUSE_OR_CLEAR, ~0);
+	int_reg = MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE;
+	int_reg |= MLXBF_I2C_CAUSE_WRITE_SUCCESS;
+	mlxbf_i2c_write(priv->slv_cause->io,
+			  MLXBF_I2C_CAUSE_OR_EVTEN0, int_reg);
+
+	/* Finally, set the 'ready' bit to start handling transactions. */
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	/* Initialize the cause coalesce resource. */
+	ret = mlxbf_i2c_init_coalesce(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize cause coalesce\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static bool mlxbf_i2c_has_coalesce(struct mlxbf_i2c_priv *priv, bool *read,
+				   bool *write)
+{
+	const struct mlxbf_i2c_chip_info *chip = priv->chip;
+	u32 coalesce0_reg, cause_reg;
+	u8 slave_shift, is_set;
+
+	*write = false;
+	*read = false;
+
+	slave_shift = chip->type != MLXBF_I2C_CHIP_TYPE_1 ?
+				MLXBF_I2C_CAUSE_YU_SLAVE_BIT :
+				priv->bus + MLXBF_I2C_CAUSE_TYU_SLAVE_BIT;
+
+	coalesce0_reg = mlxbf_i2c_read(priv->coalesce->io,
+				       MLXBF_I2C_CAUSE_COALESCE_0);
+	is_set = coalesce0_reg & (1 << slave_shift);
+
+	if (!is_set)
+		return false;
+
+	/* Check the source of the interrupt, i.e. whether a Read or Write. */
+	cause_reg = mlxbf_i2c_read(priv->slv_cause->io,
+				     MLXBF_I2C_CAUSE_ARBITER);
+	if (cause_reg & MLXBF_I2C_CAUSE_READ_WAIT_FW_RESPONSE)
+		*read = true;
+	else if (cause_reg & MLXBF_I2C_CAUSE_WRITE_SUCCESS)
+		*write = true;
+
+	/* Clear cause bits. */
+	mlxbf_i2c_write(priv->slv_cause->io, MLXBF_I2C_CAUSE_OR_CLEAR, ~0x0);
+
+	return true;
+}
+
+static bool mlxbf_smbus_slave_wait_for_idle(struct mlxbf_i2c_priv *priv,
+					    u32 timeout)
+{
+	u32 mask = MLXBF_I2C_CAUSE_S_GW_BUSY_FALL;
+	u32 addr = MLXBF_I2C_CAUSE_ARBITER;
+
+	if (mlxbf_smbus_poll(priv->slv_cause->io, addr, mask, false, timeout))
+		return true;
+
+	return false;
+}
+
+/* Send byte to 'external' smbus master. */
+static int mlxbf_smbus_irq_send(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+	u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+	u8 write_size, pec_en, addr, byte, value, byte_cnt, desc_size;
+	struct i2c_client *slave = priv->slave;
+	u32 control32, data32;
+	int ret;
+
+	if (!slave)
+		return -EINVAL;
+
+	addr = 0;
+	byte = 0;
+	desc_size = MLXBF_I2C_SLAVE_DATA_DESC_SIZE;
+
+	/*
+	 * Read bytes received from the external master. These bytes should
+	 * be located in the first data descriptor register of the slave GW.
+	 * These bytes are the slave address byte and the internal register
+	 * address, if supplied.
+	 */
+	if (recv_bytes > 0) {
+		data32 = mlxbf_i2c_read_data(priv->smbus->io,
+					     MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+		/* Parse the received bytes. */
+		switch (recv_bytes) {
+		case 2:
+			byte = (data32 >> 8) & GENMASK(7, 0);
+			fallthrough;
+		case 1:
+			addr = (data32 & GENMASK(7, 0)) >> 1;
+		}
+
+		/* Check whether it's our slave address. */
+		if (slave->addr != addr)
+			return -EINVAL;
+	}
+
+	/*
+	 * I2C read transactions may start by a WRITE followed by a READ.
+	 * Indeed, most slave devices would expect the internal address
+	 * following the slave address byte. So, write that byte first,
+	 * and then, send the requested data bytes to the master.
+	 */
+	if (recv_bytes > 1) {
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		value = byte;
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+				      &value);
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * Now, send data to the master; currently, the driver supports
+	 * READ_BYTE, READ_WORD and BLOCK READ protocols. Note that the
+	 * hardware can send up to 128 bytes per transfer. That is the
+	 * size of its data registers.
+	 */
+	i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+
+	for (byte_cnt = 0; byte_cnt < desc_size; byte_cnt++) {
+		data_desc[byte_cnt] = value;
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+	}
+
+	/* Send a stop condition to the backend. */
+	i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+	/* Handle the actual transfer. */
+
+	/* Set the number of bytes to write to master. */
+	write_size = (byte_cnt - 1) & 0x7f;
+
+	/* Write data to Slave GW data descriptor. */
+	mlxbf_i2c_smbus_write_data(priv, data_desc, byte_cnt,
+				   MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+	pec_en = 0; /* Disable PEC since it is not supported. */
+
+	/* Prepare control word. */
+	control32 = MLXBF_I2C_SLAVE_ENABLE;
+	control32 |= rol32(write_size, MLXBF_I2C_SLAVE_WRITE_BYTES_SHIFT);
+	control32 |= rol32(pec_en, MLXBF_I2C_SLAVE_SEND_PEC_SHIFT);
+
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_GW, control32);
+
+	/*
+	 * Wait until the transfer is completed; the driver will wait
+	 * until the GW is idle, a cause will rise on fall of GW busy.
+	 */
+	mlxbf_smbus_slave_wait_for_idle(priv, MLXBF_I2C_SMBUS_TIMEOUT);
+
+	/* Release the Slave GW. */
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	return 0;
+}
+
+/* Receive bytes from 'external' smbus master. */
+static int mlxbf_smbus_irq_recv(struct mlxbf_i2c_priv *priv, u8 recv_bytes)
+{
+	u8 data_desc[MLXBF_I2C_SLAVE_DATA_DESC_SIZE] = { 0 };
+	struct i2c_client *slave = priv->slave;
+	u8 value, byte, addr;
+	int ret = 0;
+
+	if (!slave)
+		return -EINVAL;
+
+	/* Read data from Slave GW data descriptor. */
+	mlxbf_i2c_smbus_read_data(priv, data_desc, recv_bytes,
+				  MLXBF_I2C_SLAVE_DATA_DESC_ADDR);
+
+	/* Check whether its our slave address. */
+	addr = data_desc[0] >> 1;
+	if (slave->addr != addr)
+		return -EINVAL;
+
+	/*
+	 * Notify the slave backend; another I2C master wants to write data
+	 * to us. This event is sent once the slave address and the write bit
+	 * is detected.
+	 */
+	i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+
+	/* Send the received data to the slave backend. */
+	for (byte = 1; byte < recv_bytes; byte++) {
+		value = data_desc[byte];
+		ret = i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED,
+				      &value);
+		if (ret < 0)
+			break;
+	}
+
+	/* Send a stop condition to the backend. */
+	i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+
+	/* Release the Slave GW. */
+	mlxbf_i2c_write(priv->smbus->io,
+			MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_PEC, 0x0);
+	mlxbf_i2c_write(priv->smbus->io, MLXBF_I2C_SMBUS_SLAVE_READY, 0x1);
+
+	return ret;
+}
+
+static irqreturn_t mlxbf_smbus_irq(int irq, void *ptr)
+{
+	struct mlxbf_i2c_priv *priv = ptr;
+	bool read, write, irq_is_set;
+	u32 rw_bytes_reg;
+	u8 recv_bytes;
+
+	/*
+	 * Read TYU interrupt register and determine the source of the
+	 * interrupt. Based on the source of the interrupt one of the
+	 * following actions are performed:
+	 *  - Receive data and send response to master.
+	 *  - Send data and release slave GW.
+	 *
+	 * Handle read/write transaction only. CRmaster and Iarp requests
+	 * are ignored for now.
+	 */
+	irq_is_set = mlxbf_i2c_has_coalesce(priv, &read, &write);
+	if (!irq_is_set || (!read && !write)) {
+		/* Nothing to do here, interrupt was not from this device. */
+		return IRQ_NONE;
+	}
+
+	/*
+	 * The MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES includes the number of
+	 * bytes from/to master. These are defined by 8-bits each. If the lower
+	 * 8 bits are set, then the master expect to read N bytes from the
+	 * slave, if the higher 8 bits are sent then the slave expect N bytes
+	 * from the master.
+	 */
+	rw_bytes_reg = mlxbf_i2c_read(priv->smbus->io,
+				      MLXBF_I2C_SMBUS_SLAVE_RS_MASTER_BYTES);
+	recv_bytes = (rw_bytes_reg >> 8) & GENMASK(7, 0);
+
+	/*
+	 * For now, the slave supports 128 bytes transfer. Discard remaining
+	 * data bytes if the master wrote more than
+	 * MLXBF_I2C_SLAVE_DATA_DESC_SIZE, i.e, the actual size of the slave
+	 * data descriptor.
+	 *
+	 * Note that we will never expect to transfer more than 128 bytes; as
+	 * specified in the SMBus standard, block transactions cannot exceed
+	 * 32 bytes.
+	 */
+	recv_bytes = recv_bytes > MLXBF_I2C_SLAVE_DATA_DESC_SIZE ?
+		MLXBF_I2C_SLAVE_DATA_DESC_SIZE : recv_bytes;
+
+	if (read)
+		mlxbf_smbus_irq_send(priv, recv_bytes);
+	else
+		mlxbf_smbus_irq_recv(priv, recv_bytes);
+
+	return IRQ_HANDLED;
+}
+
+/* Return negative errno on error. */
+static s32 mlxbf_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+				unsigned short flags, char read_write,
+				u8 command, int size,
+				union i2c_smbus_data *data)
+{
+	struct mlxbf_i2c_smbus_request request = { 0 };
+	struct mlxbf_i2c_priv *priv;
+	bool read, pec;
+	u8 byte_cnt;
+
+	request.slave = addr;
+
+	read = (read_write == I2C_SMBUS_READ);
+	pec = flags & I2C_FUNC_SMBUS_PEC;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		mlxbf_i2c_smbus_quick_command(&request, read);
+		dev_dbg(&adap->dev, "smbus quick, slave 0x%02x\n", addr);
+		break;
+
+	case I2C_SMBUS_BYTE:
+		mlxbf_i2c_smbus_byte_func(&request,
+					  read ? &data->byte : &command, read,
+					  pec);
+		dev_dbg(&adap->dev, "smbus %s byte, slave 0x%02x.\n",
+			read ? "read" : "write", addr);
+		break;
+
+	case I2C_SMBUS_BYTE_DATA:
+		mlxbf_i2c_smbus_data_byte_func(&request, &command, &data->byte,
+					       read, pec);
+		dev_dbg(&adap->dev, "smbus %s byte data at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", command, addr);
+		break;
+
+	case I2C_SMBUS_WORD_DATA:
+		mlxbf_i2c_smbus_data_word_func(&request, &command,
+					       (u8 *)&data->word, read, pec);
+		dev_dbg(&adap->dev, "smbus %s word data at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", command, addr);
+		break;
+
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		byte_cnt = data->block[0];
+		mlxbf_i2c_smbus_i2c_block_func(&request, &command, data->block,
+					       &byte_cnt, read, pec);
+		dev_dbg(&adap->dev, "i2c %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", byte_cnt, command, addr);
+		break;
+
+	case I2C_SMBUS_BLOCK_DATA:
+		byte_cnt = read ? I2C_SMBUS_BLOCK_MAX : data->block[0];
+		mlxbf_i2c_smbus_block_func(&request, &command, data->block,
+					   &byte_cnt, read, pec);
+		dev_dbg(&adap->dev, "smbus %s block data, %d bytes at 0x%02x, slave 0x%02x.\n",
+			read ? "read" : "write", byte_cnt, command, addr);
+		break;
+
+	case I2C_FUNC_SMBUS_PROC_CALL:
+		mlxbf_i2c_smbus_process_call_func(&request, &command,
+						  (u8 *)&data->word, pec);
+		dev_dbg(&adap->dev, "process call, wr/rd at 0x%02x, slave 0x%02x.\n",
+			command, addr);
+		break;
+
+	case I2C_FUNC_SMBUS_BLOCK_PROC_CALL:
+		byte_cnt = data->block[0];
+		mlxbf_i2c_smbus_blk_process_call_func(&request, &command,
+						      data->block, &byte_cnt,
+						      pec);
+		dev_dbg(&adap->dev, "block process call, wr/rd %d bytes, slave 0x%02x.\n",
+			byte_cnt, addr);
+		break;
+
+	default:
+		dev_dbg(&adap->dev, "Unsupported I2C/SMBus command %d\n",
+			size);
+		return -EOPNOTSUPP;
+	}
+
+	priv = i2c_get_adapdata(adap);
+
+	return mlxbf_i2c_smbus_start_transaction(priv, &request);
+}
+
+static int mlxbf_i2c_reg_slave(struct i2c_client *slave)
+{
+	struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+	int ret;
+
+	if (priv->slave)
+		return -EBUSY;
+
+	/*
+	 * Do not support ten bit chip address and do not use Packet Error
+	 * Checking (PEC).
+	 */
+	if (slave->flags & (I2C_CLIENT_TEN | I2C_CLIENT_PEC))
+		return -EAFNOSUPPORT;
+
+	ret = mlxbf_slave_enable(priv, slave->addr);
+	if (ret < 0)
+		return ret;
+
+	priv->slave = slave;
+
+	return 0;
+}
+
+static int mlxbf_i2c_unreg_slave(struct i2c_client *slave)
+{
+	struct mlxbf_i2c_priv *priv = i2c_get_adapdata(slave->adapter);
+	int ret;
+
+	WARN_ON(!priv->slave);
+
+	/* Unregister slave, i.e. disable the slave address in hardware. */
+	ret = mlxbf_slave_disable(priv);
+	if (ret < 0)
+		return ret;
+
+	priv->slave = NULL;
+
+	return 0;
+}
+
+static u32 mlxbf_i2c_functionality(struct i2c_adapter *adap)
+{
+	return MLXBF_I2C_FUNC_ALL;
+}
+
+static struct mlxbf_i2c_chip_info mlxbf_i2c_chip[] = {
+	[MLXBF_I2C_CHIP_TYPE_1] = {
+		.type = MLXBF_I2C_CHIP_TYPE_1,
+		.shared_res = {
+			[0] = &mlxbf_i2c_coalesce_res[MLXBF_I2C_CHIP_TYPE_1],
+			[1] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_1],
+			[2] = &mlxbf_i2c_gpio_res[MLXBF_I2C_CHIP_TYPE_1]
+		},
+		.calculate_freq = mlxbf_calculate_freq_from_tyu
+	},
+	[MLXBF_I2C_CHIP_TYPE_2] = {
+		.type = MLXBF_I2C_CHIP_TYPE_2,
+		.shared_res = {
+			[0] = &mlxbf_i2c_corepll_res[MLXBF_I2C_CHIP_TYPE_2]
+		},
+		.calculate_freq = mlxbf_calculate_freq_from_yu
+	}
+};
+
+static const struct i2c_algorithm mlxbf_i2c_algo = {
+	.smbus_xfer = mlxbf_i2c_smbus_xfer,
+	.functionality = mlxbf_i2c_functionality,
+	.reg_slave = mlxbf_i2c_reg_slave,
+	.unreg_slave = mlxbf_i2c_unreg_slave,
+};
+
+static struct i2c_adapter_quirks mlxbf_i2c_quirks = {
+	.max_read_len = MLXBF_I2C_MASTER_DATA_R_LENGTH,
+	.max_write_len = MLXBF_I2C_MASTER_DATA_W_LENGTH,
+};
+
+static const struct of_device_id mlxbf_i2c_dt_ids[] = {
+	{
+		.compatible = "mellanox,i2c-mlxbf1",
+		.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1]
+	},
+	{
+		.compatible = "mellanox,i2c-mlxbf2",
+		.data = &mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2]
+	},
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, mlxbf_i2c_dt_ids);
+
+static const struct acpi_device_id mlxbf_i2c_acpi_ids[] = {
+	{ "MLNXBF03", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_1] },
+	{ "MLNXBF23", (kernel_ulong_t)&mlxbf_i2c_chip[MLXBF_I2C_CHIP_TYPE_2] },
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, mlxbf_i2c_acpi_ids);
+
+static int mlxbf_i2c_acpi_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
+{
+	const struct acpi_device_id *aid;
+	struct acpi_device *adev;
+	unsigned long bus_id = 0;
+	const char *uid;
+	int ret;
+
+	if (acpi_disabled)
+		return -ENOENT;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return -ENXIO;
+
+	aid = acpi_match_device(mlxbf_i2c_acpi_ids, dev);
+	if (!aid)
+		return -ENODEV;
+
+	priv->chip = (struct mlxbf_i2c_chip_info *)aid->driver_data;
+
+	uid = acpi_device_uid(adev);
+	if (!uid || !(*uid)) {
+		dev_err(dev, "Cannot retrieve UID\n");
+		return -ENODEV;
+	}
+
+	ret = kstrtoul(uid, 0, &bus_id);
+	if (!ret)
+		priv->bus = bus_id;
+
+	return ret;
+}
+
+static int mlxbf_i2c_of_probe(struct device *dev, struct mlxbf_i2c_priv *priv)
+{
+	const struct of_device_id *oid;
+	int bus_id = -1;
+
+	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
+		oid = of_match_node(mlxbf_i2c_dt_ids, dev->of_node);
+		if (!oid)
+			return -ENODEV;
+
+		priv->chip = oid->data;
+
+		bus_id = of_alias_get_id(dev->of_node, "i2c");
+		if (bus_id >= 0)
+			priv->bus = bus_id;
+	}
+
+	if (bus_id < 0) {
+		dev_err(dev, "Cannot get bus id");
+		return bus_id;
+	}
+
+	return 0;
+}
+
+static int mlxbf_i2c_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mlxbf_i2c_priv *priv;
+	struct i2c_adapter *adap;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct mlxbf_i2c_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = mlxbf_i2c_acpi_probe(dev, priv);
+	if (ret < 0 && ret != -ENOENT && ret != -ENXIO)
+		ret = mlxbf_i2c_of_probe(dev, priv);
+
+	if (ret < 0)
+		return ret;
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->smbus,
+				      MLXBF_I2C_SMBUS_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch smbus resource info");
+		return ret;
+	}
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->mst_cause,
+				      MLXBF_I2C_MST_CAUSE_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch cause master resource info");
+		return ret;
+	}
+
+	ret = mlxbf_i2c_init_resource(pdev, &priv->slv_cause,
+				      MLXBF_I2C_SLV_CAUSE_RES);
+	if (ret < 0) {
+		dev_err(dev, "Cannot fetch cause slave resource info");
+		return ret;
+	}
+
+	adap = &priv->adap;
+	adap->owner = THIS_MODULE;
+	adap->class = I2C_CLASS_HWMON;
+	adap->algo = &mlxbf_i2c_algo;
+	adap->quirks = &mlxbf_i2c_quirks;
+	adap->dev.parent = dev;
+	adap->dev.of_node = dev->of_node;
+	adap->nr = priv->bus;
+
+	snprintf(adap->name, sizeof(adap->name), "i2c%d", adap->nr);
+	i2c_set_adapdata(adap, priv);
+
+	/* Read Core PLL frequency. */
+	ret = mlxbf_i2c_calculate_corepll_freq(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "cannot get core clock frequency\n");
+		/* Set to default value. */
+		priv->frequency = MLXBF_I2C_COREPLL_FREQ;
+	}
+
+	/*
+	 * Initialize master.
+	 * Note that a physical bus might be shared among Linux and firmware
+	 * (e.g., ATF). Thus, the bus should be initialized and ready and
+	 * bus initialization would be unnecessary. This requires additional
+	 * knowledge about physical busses. But, since an extra initialization
+	 * does not really hurt, then keep the code as is.
+	 */
+	ret = mlxbf_i2c_init_master(pdev, priv);
+	if (ret < 0) {
+		dev_err(dev, "failed to initialize smbus master %d",
+			priv->bus);
+		return ret;
+	}
+
+	mlxbf_i2c_init_timings(pdev, priv);
+
+	mlxbf_i2c_init_slave(pdev, priv);
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(dev, irq, mlxbf_smbus_irq,
+			       IRQF_ONESHOT | IRQF_SHARED | IRQF_PROBE_SHARED,
+			       dev_name(dev), priv);
+	if (ret < 0) {
+		dev_err(dev, "Cannot get irq %d\n", irq);
+		return ret;
+	}
+
+	priv->irq = irq;
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&mlxbf_i2c_bus_lock);
+	mlxbf_i2c_bus_count++;
+	mutex_unlock(&mlxbf_i2c_bus_lock);
+
+	return 0;
+}
+
+static int mlxbf_i2c_remove(struct platform_device *pdev)
+{
+	struct mlxbf_i2c_priv *priv = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
+	struct resource *params;
+
+	params = priv->smbus->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	params = priv->mst_cause->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	params = priv->slv_cause->params;
+	devm_release_mem_region(dev, params->start, resource_size(params));
+
+	/*
+	 * Release shared resources. This should be done when releasing
+	 * the I2C controller.
+	 */
+	mutex_lock(&mlxbf_i2c_bus_lock);
+	if (--mlxbf_i2c_bus_count == 0) {
+		mlxbf_i2c_release_coalesce(pdev, priv);
+		mlxbf_i2c_release_corepll(pdev, priv);
+		mlxbf_i2c_release_gpio(pdev, priv);
+	}
+	mutex_unlock(&mlxbf_i2c_bus_lock);
+
+	devm_free_irq(dev, priv->irq, priv);
+
+	i2c_del_adapter(&priv->adap);
+
+	return 0;
+}
+
+static struct platform_driver mlxbf_i2c_driver = {
+	.probe = mlxbf_i2c_probe,
+	.remove = mlxbf_i2c_remove,
+	.driver = {
+		.name = "i2c-mlxbf",
+		.of_match_table = mlxbf_i2c_dt_ids,
+		.acpi_match_table = ACPI_PTR(mlxbf_i2c_acpi_ids),
+	},
+};
+
+static int __init mlxbf_i2c_init(void)
+{
+	mutex_init(&mlxbf_i2c_coalesce_lock);
+	mutex_init(&mlxbf_i2c_corepll_lock);
+	mutex_init(&mlxbf_i2c_gpio_lock);
+
+	mutex_init(&mlxbf_i2c_bus_lock);
+
+	return platform_driver_register(&mlxbf_i2c_driver);
+}
+module_init(mlxbf_i2c_init);
+
+static void __exit mlxbf_i2c_exit(void)
+{
+	platform_driver_unregister(&mlxbf_i2c_driver);
+
+	mutex_destroy(&mlxbf_i2c_bus_lock);
+
+	mutex_destroy(&mlxbf_i2c_gpio_lock);
+	mutex_destroy(&mlxbf_i2c_corepll_lock);
+	mutex_destroy(&mlxbf_i2c_coalesce_lock);
+}
+module_exit(mlxbf_i2c_exit);
+
+MODULE_DESCRIPTION("Mellanox BlueField I2C bus driver");
+MODULE_AUTHOR("Khalil Blaiech <kblaiech@mellanox.com>");
+MODULE_LICENSE("GPL v2");