i2c-algo-sibyte: Merge into i2c-sibyte

i2c-algo-sibyte: Merge into i2c-sibyte

Merge i2c-algo-sibyte into i2c-sibyte, as this is a complete,
hardware-dependent SMBus implementation and not a reusable algorithm.

Perform some basic coding style cleanups while we're here (mainly
space-based indentation replaced by tabulations.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 0 insertions, 193 deletions

diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 30408015d231..c034820615bb 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -53,12 +53,6 @@ config I2C_ALGO8XX
 	tristate "MPC8xx CPM I2C interface"
 	depends on 8xx && I2C
 
-config I2C_ALGO_SIBYTE
-	tristate "SiByte SMBus interface"
-	depends on SIBYTE_SB1xxx_SOC && I2C
-	help
-	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
 config I2C_ALGO_SGI
 	tristate "I2C SGI interfaces"
 	depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)
diff --git a/drivers/i2c/algos/Makefile b/drivers/i2c/algos/Makefile
index 867fe1f67401..208be04a3dbd 100644
--- a/drivers/i2c/algos/Makefile
+++ b/drivers/i2c/algos/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
 obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o
 obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)
diff --git a/drivers/i2c/algos/i2c-algo-sibyte.c b/drivers/i2c/algos/i2c-algo-sibyte.c
deleted file mode 100644
index 16d666fa16f3..000000000000
--- a/drivers/i2c/algos/i2c-algo-sibyte.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-sibyte.c i2c driver algorithms for bit-shift adapters		     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 2001,2002,2003 Broadcom Corporation
-     Copyright (C) 1995-2000 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
-   Frodo Looijaard <frodol@dds.nl>.  */
-
-/* Ported for SiByte SOCs by Broadcom Corporation.  */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-algo-sibyte.h>
-
-/* ----- global defines ----------------------------------------------- */
-#define SMB_CSR(a,r) ((long)(a->reg_base + r))
-
-/* ----- global variables ---------------------------------------------	*/
-
-/* module parameters:
- */
-static int bit_scan;	/* have a look at what's hanging 'round		*/
-
-
-static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr, 
-                      unsigned short flags, char read_write,
-                      u8 command, int size, union i2c_smbus_data * data)
-{
-	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-        int data_bytes = 0;
-        int error;
-
-        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
-
-        switch (size) {
-        case I2C_SMBUS_QUICK:
-                csr_out32((V_SMB_ADDR(addr) | (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
-			   V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
-                break;
-        case I2C_SMBUS_BYTE:
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 1;
-                } else {
-                        csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        case I2C_SMBUS_BYTE_DATA:
-                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 1;
-                } else {
-                        csr_out32(V_SMB_LB(data->byte), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        case I2C_SMBUS_WORD_DATA:
-                csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
-                if (read_write == I2C_SMBUS_READ) {
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                        data_bytes = 2;
-                } else {
-                        csr_out32(V_SMB_LB(data->word & 0xff), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32(V_SMB_MB(data->word >> 8), SMB_CSR(adap, R_SMB_DATA));
-                        csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
-				  SMB_CSR(adap, R_SMB_START));
-                }
-                break;
-        default:
-                return -1;      /* XXXKW better error code? */
-        }
-
-        while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
-                ;
-
-        error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
-        if (error & M_SMB_ERROR) {
-                /* Clear error bit by writing a 1 */
-                csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
-                return -1;      /* XXXKW better error code? */
-        }
-
-        if (data_bytes == 1)
-                data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
-        if (data_bytes == 2)
-                data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
-
-        return 0;
-}
-
-static u32 bit_func(struct i2c_adapter *adap)
-{
-	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
-                I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
-}
-
-
-/* -----exported algorithm data: -------------------------------------	*/
-
-static struct i2c_algorithm i2c_sibyte_algo = {
-	.smbus_xfer	= smbus_xfer,
-	.functionality	= bit_func,
-};
-
-/* 
- * registering functions to load algorithms at runtime 
- */
-int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
-{
-	int i;
-	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
-
-	/* register new adapter to i2c module... */
-	i2c_adap->algo = &i2c_sibyte_algo;
-        
-        /* Set the frequency to 100 kHz */
-        csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
-        csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
-
-	/* scan bus */
-	if (bit_scan) {
-                union i2c_smbus_data data;
-                int rc;
-		printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
-		       i2c_adap->name);
-		for (i = 0x00; i < 0x7f; i++) {
-                        /* XXXKW is this a realistic probe? */
-                        rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
-                                        I2C_SMBUS_BYTE_DATA, &data);
-			if (!rc) {
-				printk("(%02x)",i); 
-			} else 
-				printk("."); 
-		}
-		printk("\n");
-	}
-
-	return i2c_add_adapter(i2c_adap);
-}
-
-
-int i2c_sibyte_del_bus(struct i2c_adapter *adap)
-{
-	return i2c_del_adapter(adap);
-}
-
-
-EXPORT_SYMBOL(i2c_sibyte_add_bus);
-EXPORT_SYMBOL(i2c_sibyte_del_bus);
-
-MODULE_AUTHOR("Kip Walker, Broadcom Corp.");
-MODULE_DESCRIPTION("SiByte I2C-Bus algorithm");
-module_param(bit_scan, int, 0);
-MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
-MODULE_LICENSE("GPL");