Merge tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "Updates for SoC specific drivers include a few subsystems that have
  their own maintainers but send them through the soc tree:

  TEE/OP-TEE:
   - Add tracepoints around calls to secure world

  Memory controller drivers:
   - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms
   - Add debug statistics to Tegra20 memory controller
   - Update Tegra bindings and convert to dtschema

  ARM SCMI Firmware:
   - Support for modular SCMI protocols and vendor specific extensions
   - New SCMI IIO driver
   - Per-cpu DVFS

  The other driver changes are all from the platform maintainers
  directly and reflect the drivers that don't fit into any other
  subsystem as well as treewide changes for a particular platform.

  SoCFPGA:
   - Various cleanups contributed by Krzysztof Kozlowski

  Mediatek:
   - add MT8183 support to mutex driver
   - MMSYS: use per SoC array to describe the possible routing
   - add MMSYS support for MT8183 and MT8167
   - add support for PMIC wrapper with integrated arbiter
   - add support for MT8192/MT6873

  Tegra:
   - Bug fixes to PMC and clock drivers

  NXP/i.MX:
   - Update SCU power domain driver to keep console domain power on.
   - Add missing ADC1 power domain to SCU power domain driver.
   - Update comments for single global power domain in SCU power domain
     driver.
   - Add i.MX51/i.MX53 unique id support to i.MX SoC driver.

  NXP/FSL SoC driver updates for v5.13
   - Add ACPI support for RCPM driver
   - Use generic io{read,write} for QE drivers after performance
     optimized for PowerPC
   - Fix QBMAN probe to cleanup HW states correctly for kexec
   - Various cleanup and style fix for QBMAN/QE/GUTS drivers

  OMAP:
   - Preparation to use devicetree for genpd
   - ti-sysc needs iorange check improved when the interconnect target
     module has no control registers listed
   - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to
     avoid issues with missing resources and unnecessary deferred probe
   - ti-sysc debug option can now detect more devices
   - ti-sysc now warns if an old incomplete devicetree data is found as
     we now rely on it being complete for am3 and 4
   - soc init code needs to check for prcm and prm nodes for omap4/5 and
     dra7
   - omap-prm driver needs to enable autoidle retention support for
     omap4
   - omap5 clocks are missing gpmc and ocmc clock registers
   - pci-dra7xx now needs to use builtin_platform_driver instead of
     using builtin_platform_driver_probe for deferred probe to work

  Raspberry Pi:
   - Fix-up all RPi firmware drivers so as for unbind to happen in an
     orderly fashion
   - Support for RPi's PoE hat PWM bus

  Qualcomm
   - Improved detection for SCM calling conventions
   - Support for OEM specific wifi firmware path
   - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP"

* tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: aspeed: fix a ternary sign expansion bug
  memory: mtk-smi: Add device-link between smi-larb and smi-common
  memory: samsung: exynos5422-dmc: handle clk_set_parent() failure
  memory: renesas-rpc-if: fix possible NULL pointer dereference of resource
  clk: socfpga: fix iomem pointer cast on 64-bit
  soc: aspeed: Adapt to new LPC device tree layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  ARM: dts: Remove LPC BMC and Host partitions
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  soc: fsl: enable acpi support in RCPM driver
  soc: qcom: mdt_loader: Detect truncated read of segments
  soc: qcom: mdt_loader: Validate that p_filesz < p_memsz
  soc: qcom: pdr: Fix error return code in pdr_register_listener
  firmware: qcom_scm: Fix kernel-doc function names to match
  firmware: qcom_scm: Suppress sysfs bind attributes
  firmware: qcom_scm: Workaround lack of "is available" call on SC7180
  firmware: qcom_scm: Reduce locking section for __get_convention()
  firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool
  Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers"
  ...

1 files changed, 15 insertions, 9 deletions

diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index 17d064e58938..b1329a58ce40 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -2,7 +2,7 @@
 /*
  * System Control and Management Interface(SCMI) based hwmon sensor driver
  *
- * Copyright (C) 2018 ARM Ltd.
+ * Copyright (C) 2018-2021 ARM Ltd.
  * Sudeep Holla <sudeep.holla@arm.com>
  */
 
@@ -13,8 +13,10 @@
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
 
+static const struct scmi_sensor_proto_ops *sensor_ops;
+
 struct scmi_sensors {
-	const struct scmi_handle *handle;
+	const struct scmi_protocol_handle *ph;
 	const struct scmi_sensor_info **info[hwmon_max];
 };
 
@@ -69,10 +71,9 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 	u64 value;
 	const struct scmi_sensor_info *sensor;
 	struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
-	const struct scmi_handle *h = scmi_sensors->handle;
 
 	sensor = *(scmi_sensors->info[type] + channel);
-	ret = h->sensor_ops->reading_get(h, sensor->id, &value);
+	ret = sensor_ops->reading_get(scmi_sensors->ph, sensor->id, &value);
 	if (ret)
 		return ret;
 
@@ -169,11 +170,16 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	struct hwmon_channel_info *scmi_hwmon_chan;
 	const struct hwmon_channel_info **ptr_scmi_ci;
 	const struct scmi_handle *handle = sdev->handle;
+	struct scmi_protocol_handle *ph;
 
-	if (!handle || !handle->sensor_ops)
+	if (!handle)
 		return -ENODEV;
 
-	nr_sensors = handle->sensor_ops->count_get(handle);
+	sensor_ops = handle->devm_protocol_get(sdev, SCMI_PROTOCOL_SENSOR, &ph);
+	if (IS_ERR(sensor_ops))
+		return PTR_ERR(sensor_ops);
+
+	nr_sensors = sensor_ops->count_get(ph);
 	if (!nr_sensors)
 		return -EIO;
 
@@ -181,10 +187,10 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	if (!scmi_sensors)
 		return -ENOMEM;
 
-	scmi_sensors->handle = handle;
+	scmi_sensors->ph = ph;
 
 	for (i = 0; i < nr_sensors; i++) {
-		sensor = handle->sensor_ops->info_get(handle, i);
+		sensor = sensor_ops->info_get(ph, i);
 		if (!sensor)
 			return -EINVAL;
 
@@ -236,7 +242,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 	}
 
 	for (i = nr_sensors - 1; i >= 0 ; i--) {
-		sensor = handle->sensor_ops->info_get(handle, i);
+		sensor = sensor_ops->info_get(ph, i);
 		if (!sensor)
 			continue;