summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
authoramy.shih <amy.shih@advantech.com.tw>2019-09-19 11:02:05 +0800
committerGuenter Roeck <linux@roeck-us.net>2019-10-02 06:42:48 -0700
commit6bbfdcbc8e459acda67e32f520f7ecddc391afe9 (patch)
treed6c957c6cde720b744d719bed82b116852956470 /drivers/hwmon
parentb428db1e880d5f0f1cc22009974bee38a095284e (diff)
downloadlinux-6bbfdcbc8e459acda67e32f520f7ecddc391afe9.tar.bz2
hwmon: (nct7904) Add array fan_alarm and vsen_alarm to store the alarms in nct7904_data struct.
SMI# interrupt for fan and voltage is Two-Times Interrupt Mode. Fan or voltage exceeds high limit or going below low limit, it will causes an interrupt if the previous interrupt has been reset by reading all the interrupt Status Register. Thus, add the array fan_alarm and vsen_alarm to store the alarms for all of the fan and voltage sensors. Signed-off-by: amy.shih <amy.shih@advantech.com.tw> Link: https://lore.kernel.org/r/20190919030205.11440-1-Amy.Shih@advantech.com.tw Fixes: 486842db3b79 ("hwmon: (nct7904) Add extra sysfs support for fan, voltage and temperature.") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/nct7904.c22
1 files changed, 20 insertions, 2 deletions
diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
index f62dd1882451..b26419dbe840 100644
--- a/drivers/hwmon/nct7904.c
+++ b/drivers/hwmon/nct7904.c
@@ -99,6 +99,8 @@ struct nct7904_data {
u8 enable_dts;
u8 has_dts;
u8 temp_mode; /* 0: TR mode, 1: TD mode */
+ u8 fan_alarm[2];
+ u8 vsen_alarm[3];
};
/* Access functions */
@@ -214,7 +216,15 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
SMI_STS5_REG + (channel >> 3));
if (ret < 0)
return ret;
- *val = (ret >> (channel & 0x07)) & 1;
+ if (!data->fan_alarm[channel >> 3])
+ data->fan_alarm[channel >> 3] = ret & 0xff;
+ else
+ /* If there is new alarm showing up */
+ data->fan_alarm[channel >> 3] |= (ret & 0xff);
+ *val = (data->fan_alarm[channel >> 3] >> (channel & 0x07)) & 1;
+ /* Needs to clean the alarm if alarm existing */
+ if (*val)
+ data->fan_alarm[channel >> 3] ^= 1 << (channel & 0x07);
return 0;
default:
return -EOPNOTSUPP;
@@ -298,7 +308,15 @@ static int nct7904_read_in(struct device *dev, u32 attr, int channel,
SMI_STS1_REG + (index >> 3));
if (ret < 0)
return ret;
- *val = (ret >> (index & 0x07)) & 1;
+ if (!data->vsen_alarm[index >> 3])
+ data->vsen_alarm[index >> 3] = ret & 0xff;
+ else
+ /* If there is new alarm showing up */
+ data->vsen_alarm[index >> 3] |= (ret & 0xff);
+ *val = (data->vsen_alarm[index >> 3] >> (index & 0x07)) & 1;
+ /* Needs to clean the alarm if alarm existing */
+ if (*val)
+ data->vsen_alarm[index >> 3] ^= 1 << (index & 0x07);
return 0;
default:
return -EOPNOTSUPP;