hwmon: Add support for ltc2947

The ltc2947 is a high precision power and energy monitor with an
internal sense resistor supporting up to +/- 30A. Three internal no
Latency ADCs ensure accurate measurement of voltage and current, while
high-bandwidth analog multiplication of voltage and current provides
accurate power measurement in a wide range of applications. Internal or
external clocking options enable precise charge and energy measurements.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20191021154115.319073-1-nuno.sa@analog.com
[groeck: Removed unnecessary checks when reading temperature and energy;
	 PAGE{0,1} -> LTC2947_PAGE_{0,1}]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

6 files changed, 1324 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 7b6c4025b827..8c102ea2938b 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -726,6 +726,33 @@ config SENSORS_LTC2945
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc2945.
 
+config SENSORS_LTC2947
+	tristate
+
+config SENSORS_LTC2947_I2C
+	tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C"
+	depends on I2C
+	select REGMAP_I2C
+	select SENSORS_LTC2947
+	help
+	  If you say yes here you get support for Linear Technology LTC2947
+	  I2C High Precision Power and Energy Monitor
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc2947-i2c.
+
+config SENSORS_LTC2947_SPI
+	tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI"
+	depends on SPI_MASTER
+	select REGMAP_SPI
+	select SENSORS_LTC2947
+	help
+	  If you say yes here you get support for Linear Technology LTC2947
+	  SPI High Precision Power and Energy Monitor
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc2947-spi.
+
 config SENSORS_LTC2990
 	tristate "Linear Technology LTC2990"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 40c036ea45e6..e416cfded0c4 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -106,6 +106,9 @@ obj-$(CONFIG_SENSORS_LM95234)	+= lm95234.o
 obj-$(CONFIG_SENSORS_LM95241)	+= lm95241.o
 obj-$(CONFIG_SENSORS_LM95245)	+= lm95245.o
 obj-$(CONFIG_SENSORS_LTC2945)	+= ltc2945.o
+obj-$(CONFIG_SENSORS_LTC2947)	+= ltc2947-core.o
+obj-$(CONFIG_SENSORS_LTC2947_I2C) += ltc2947-i2c.o
+obj-$(CONFIG_SENSORS_LTC2947_SPI) += ltc2947-spi.o
 obj-$(CONFIG_SENSORS_LTC2990)	+= ltc2990.o
 obj-$(CONFIG_SENSORS_LTC4151)	+= ltc4151.o
 obj-$(CONFIG_SENSORS_LTC4215)	+= ltc4215.o
diff --git a/drivers/hwmon/ltc2947-core.c b/drivers/hwmon/ltc2947-core.c
new file mode 100644
index 000000000000..bb3f7749a0b0
--- /dev/null
+++ b/drivers/hwmon/ltc2947-core.c
@@ -0,0 +1,1183 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices LTC2947 high precision power and energy monitor
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "ltc2947.h"
+
+/* register's */
+#define LTC2947_REG_PAGE_CTRL		0xFF
+#define LTC2947_REG_CTRL		0xF0
+#define LTC2947_REG_TBCTL		0xE9
+#define LTC2947_CONT_MODE_MASK		BIT(3)
+#define LTC2947_CONT_MODE(x)		FIELD_PREP(LTC2947_CONT_MODE_MASK, x)
+#define LTC2947_PRE_MASK		GENMASK(2, 0)
+#define LTC2947_PRE(x)			FIELD_PREP(LTC2947_PRE_MASK, x)
+#define LTC2947_DIV_MASK		GENMASK(7, 3)
+#define LTC2947_DIV(x)			FIELD_PREP(LTC2947_DIV_MASK, x)
+#define LTC2947_SHUTDOWN_MASK		BIT(0)
+#define LTC2947_REG_ACCUM_POL		0xE1
+#define LTC2947_ACCUM_POL_1_MASK	GENMASK(1, 0)
+#define LTC2947_ACCUM_POL_1(x)		FIELD_PREP(LTC2947_ACCUM_POL_1_MASK, x)
+#define LTC2947_ACCUM_POL_2_MASK	GENMASK(3, 2)
+#define LTC2947_ACCUM_POL_2(x)		FIELD_PREP(LTC2947_ACCUM_POL_2_MASK, x)
+#define LTC2947_REG_ACCUM_DEADBAND	0xE4
+#define LTC2947_REG_GPIOSTATCTL		0x67
+#define LTC2947_GPIO_EN_MASK		BIT(0)
+#define LTC2947_GPIO_EN(x)		FIELD_PREP(LTC2947_GPIO_EN_MASK, x)
+#define LTC2947_GPIO_FAN_EN_MASK	BIT(6)
+#define LTC2947_GPIO_FAN_EN(x)		FIELD_PREP(LTC2947_GPIO_FAN_EN_MASK, x)
+#define LTC2947_GPIO_FAN_POL_MASK	BIT(7)
+#define LTC2947_GPIO_FAN_POL(x)		FIELD_PREP(LTC2947_GPIO_FAN_POL_MASK, x)
+#define LTC2947_REG_GPIO_ACCUM		0xE3
+/* 200Khz */
+#define LTC2947_CLK_MIN			200000
+/* 25Mhz */
+#define LTC2947_CLK_MAX			25000000
+#define LTC2947_PAGE0			0
+#define LTC2947_PAGE1			1
+/* Voltage registers */
+#define LTC2947_REG_VOLTAGE		0xA0
+#define LTC2947_REG_VOLTAGE_MAX		0x50
+#define LTC2947_REG_VOLTAGE_MIN		0x52
+#define LTC2947_REG_VOLTAGE_THRE_H	0x90
+#define LTC2947_REG_VOLTAGE_THRE_L	0x92
+#define LTC2947_REG_DVCC		0xA4
+#define LTC2947_REG_DVCC_MAX		0x58
+#define LTC2947_REG_DVCC_MIN		0x5A
+#define LTC2947_REG_DVCC_THRE_H		0x98
+#define LTC2947_REG_DVCC_THRE_L		0x9A
+#define LTC2947_VOLTAGE_GEN_CHAN	0
+#define LTC2947_VOLTAGE_DVCC_CHAN	1
+/* in mV */
+#define VOLTAGE_MAX			15500
+#define VOLTAGE_MIN			-300
+#define VDVCC_MAX			15000
+#define VDVCC_MIN			4750
+/* Current registers */
+#define LTC2947_REG_CURRENT		0x90
+#define LTC2947_REG_CURRENT_MAX		0x40
+#define LTC2947_REG_CURRENT_MIN		0x42
+#define LTC2947_REG_CURRENT_THRE_H	0x80
+#define LTC2947_REG_CURRENT_THRE_L	0x82
+/* in mA */
+#define CURRENT_MAX			30000
+#define CURRENT_MIN			-30000
+/* Power registers */
+#define LTC2947_REG_POWER		0x93
+#define LTC2947_REG_POWER_MAX		0x44
+#define LTC2947_REG_POWER_MIN		0x46
+#define LTC2947_REG_POWER_THRE_H	0x84
+#define LTC2947_REG_POWER_THRE_L	0x86
+/* in uW */
+#define POWER_MAX			450000000
+#define POWER_MIN			-450000000
+/* Temperature registers */
+#define LTC2947_REG_TEMP		0xA2
+#define LTC2947_REG_TEMP_MAX		0x54
+#define LTC2947_REG_TEMP_MIN		0x56
+#define LTC2947_REG_TEMP_THRE_H		0x94
+#define LTC2947_REG_TEMP_THRE_L		0x96
+#define LTC2947_REG_TEMP_FAN_THRE_H	0x9C
+#define LTC2947_REG_TEMP_FAN_THRE_L	0x9E
+#define LTC2947_TEMP_FAN_CHAN		1
+/* in millidegress Celsius */
+#define TEMP_MAX			85000
+#define TEMP_MIN			-40000
+/* Energy registers */
+#define LTC2947_REG_ENERGY1		0x06
+#define LTC2947_REG_ENERGY2		0x16
+/* Status/Alarm/Overflow registers */
+#define LTC2947_REG_STATUS		0x80
+#define LTC2947_REG_STATVT		0x81
+#define LTC2947_REG_STATIP		0x82
+#define LTC2947_REG_STATVDVCC		0x87
+
+#define LTC2947_ALERTS_SIZE	(LTC2947_REG_STATVDVCC - LTC2947_REG_STATUS)
+#define LTC2947_MAX_VOLTAGE_MASK	BIT(0)
+#define LTC2947_MIN_VOLTAGE_MASK	BIT(1)
+#define LTC2947_MAX_CURRENT_MASK	BIT(0)
+#define LTC2947_MIN_CURRENT_MASK	BIT(1)
+#define LTC2947_MAX_POWER_MASK		BIT(2)
+#define LTC2947_MIN_POWER_MASK		BIT(3)
+#define LTC2947_MAX_TEMP_MASK		BIT(2)
+#define LTC2947_MIN_TEMP_MASK		BIT(3)
+#define LTC2947_MAX_TEMP_FAN_MASK	BIT(4)
+#define LTC2947_MIN_TEMP_FAN_MASK	BIT(5)
+
+struct ltc2947_data {
+	struct regmap *map;
+	struct device *dev;
+	/*
+	 * The mutex is needed because the device has 2 memory pages. When
+	 * reading/writing the correct page needs to be set so that, the
+	 * complete sequence select_page->read/write needs to be protected.
+	 */
+	struct mutex lock;
+	u32 lsb_energy;
+	bool gpio_out;
+};
+
+static int __ltc2947_val_read16(const struct ltc2947_data *st, const u8 reg,
+				u64 *val)
+{
+	__be16 __val = 0;
+	int ret;
+
+	ret = regmap_bulk_read(st->map, reg, &__val, 2);
+	if (ret)
+		return ret;
+
+	*val = be16_to_cpu(__val);
+
+	return 0;
+}
+
+static int __ltc2947_val_read24(const struct ltc2947_data *st, const u8 reg,
+				u64 *val)
+{
+	__be32 __val = 0;
+	int ret;
+
+	ret = regmap_bulk_read(st->map, reg, &__val, 3);
+	if (ret)
+		return ret;
+
+	*val = be32_to_cpu(__val) >> 8;
+
+	return 0;
+}
+
+static int __ltc2947_val_read64(const struct ltc2947_data *st, const u8 reg,
+				u64 *val)
+{
+	__be64 __val = 0;
+	int ret;
+
+	ret = regmap_bulk_read(st->map, reg, &__val, 6);
+	if (ret)
+		return ret;
+
+	*val = be64_to_cpu(__val) >> 16;
+
+	return 0;
+}
+
+static int ltc2947_val_read(struct ltc2947_data *st, const u8 reg,
+			    const u8 page, const size_t size, s64 *val)
+{
+	int ret;
+	u64 __val = 0;
+
+	mutex_lock(&st->lock);
+
+	ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page);
+	if (ret) {
+		mutex_unlock(&st->lock);
+		return ret;
+	}
+
+	dev_dbg(st->dev, "Read val, reg:%02X, p:%d sz:%zu\n", reg, page,
+		size);
+
+	switch (size) {
+	case 2:
+		ret = __ltc2947_val_read16(st, reg, &__val);
+		break;
+	case 3:
+		ret = __ltc2947_val_read24(st, reg, &__val);
+		break;
+	case 6:
+		ret = __ltc2947_val_read64(st, reg, &__val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&st->lock);
+
+	if (ret)
+		return ret;
+
+	*val = sign_extend64(__val, (8 * size) - 1);
+
+	dev_dbg(st->dev, "Got s:%lld, u:%016llX\n", *val, __val);
+
+	return 0;
+}
+
+static int __ltc2947_val_write64(const struct ltc2947_data *st, const u8 reg,
+				 const u64 val)
+{
+	__be64 __val;
+
+	__val = cpu_to_be64(val << 16);
+	return regmap_bulk_write(st->map, reg, &__val, 6);
+}
+
+static int __ltc2947_val_write16(const struct ltc2947_data *st, const u8 reg,
+				 const u16 val)
+{
+	__be16 __val;
+
+	__val = cpu_to_be16(val);
+	return regmap_bulk_write(st->map, reg, &__val, 2);
+}
+
+static int ltc2947_val_write(struct ltc2947_data *st, const u8 reg,
+			     const u8 page, const size_t size, const u64 val)
+{
+	int ret;
+
+	mutex_lock(&st->lock);
+	/* set device on correct page */
+	ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page);
+	if (ret) {
+		mutex_unlock(&st->lock);
+		return ret;
+	}
+
+	dev_dbg(st->dev, "Write val, r:%02X, p:%d, sz:%zu, val:%016llX\n",
+		reg, page, size, val);
+
+	switch (size) {
+	case 2:
+		ret = __ltc2947_val_write16(st, reg, val);
+		break;
+	case 6:
+		ret = __ltc2947_val_write64(st, reg, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int ltc2947_reset_history(struct ltc2947_data *st, const u8 reg_h,
+				 const u8 reg_l)
+{
+	int ret;
+	/*
+	 * let's reset the tracking register's. Tracking register's have all
+	 * 2 bytes size
+	 */
+	ret = ltc2947_val_write(st, reg_h, LTC2947_PAGE0, 2, 0x8000U);
+	if (ret)
+		return ret;
+
+	return ltc2947_val_write(st, reg_l, LTC2947_PAGE0, 2, 0x7FFFU);
+}
+
+static int ltc2947_alarm_read(struct ltc2947_data *st, const u8 reg,
+			      const u32 mask, long *val)
+{
+	u8 offset = reg - LTC2947_REG_STATUS;
+	/* +1 to include status reg */
+	char alarms[LTC2947_ALERTS_SIZE + 1];
+	int ret = 0;
+
+	memset(alarms, 0, sizeof(alarms));
+
+	mutex_lock(&st->lock);
+
+	ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, LTC2947_PAGE0);
+	if (ret)
+		goto unlock;
+
+	dev_dbg(st->dev, "Read alarm, reg:%02X, mask:%02X\n", reg, mask);
+	/*
+	 * As stated in the datasheet, when Threshold and Overflow registers
+	 * are used, the status and all alert registers must be read in one
+	 * multi-byte transaction.
+	 */
+	ret = regmap_bulk_read(st->map, LTC2947_REG_STATUS, alarms,
+			       sizeof(alarms));
+	if (ret)
+		goto unlock;
+
+	/* get the alarm */
+	*val = !!(alarms[offset] & mask);
+unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static ssize_t ltc2947_show_value(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	int ret;
+	s64 val = 0;
+
+	ret = ltc2947_val_read(st, attr->index, LTC2947_PAGE0, 6, &val);
+	if (ret)
+		return ret;
+
+	/* value in microJoule. st->lsb_energy was multiplied by 10E9 */
+	val = div_s64(val * st->lsb_energy, 1000);
+
+	return sprintf(buf, "%lld\n", val);
+}
+
+static int ltc2947_read_temp(struct device *dev, const u32 attr, long *val,
+			     const int channel)
+{
+	int ret;
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	s64 __val = 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ret = ltc2947_val_read(st, LTC2947_REG_TEMP, LTC2947_PAGE0,
+				       2, &__val);
+		break;
+	case hwmon_temp_highest:
+		ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MAX, LTC2947_PAGE0,
+				       2, &__val);
+		break;
+	case hwmon_temp_lowest:
+		ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MIN, LTC2947_PAGE0,
+				       2, &__val);
+		break;
+	case hwmon_temp_max_alarm:
+		if (channel == LTC2947_TEMP_FAN_CHAN)
+			return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+						  LTC2947_MAX_TEMP_FAN_MASK,
+						  val);
+
+		return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+					  LTC2947_MAX_TEMP_MASK, val);
+	case hwmon_temp_min_alarm:
+		if (channel == LTC2947_TEMP_FAN_CHAN)
+			return	ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+						   LTC2947_MIN_TEMP_FAN_MASK,
+						   val);
+
+		return	ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+					   LTC2947_MIN_TEMP_MASK, val);
+	case hwmon_temp_max:
+		if (channel == LTC2947_TEMP_FAN_CHAN)
+			ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_H,
+					       LTC2947_PAGE1, 2, &__val);
+		else
+			ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_H,
+					       LTC2947_PAGE1, 2, &__val);
+		break;
+	case hwmon_temp_min:
+		if (channel == LTC2947_TEMP_FAN_CHAN)
+			ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_L,
+					       LTC2947_PAGE1, 2, &__val);
+		else
+			ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_L,
+					       LTC2947_PAGE1, 2, &__val);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	/* in milidegrees celcius, temp is given by: */
+	*val = (__val * 204) + 550;
+
+	return 0;
+}
+
+static int ltc2947_read_power(struct device *dev, const u32 attr, long *val)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	int ret;
+	u32 lsb = 200000; /* in uW */
+	s64 __val = 0;
+
+	switch (attr) {
+	case hwmon_power_input:
+		ret = ltc2947_val_read(st, LTC2947_REG_POWER, LTC2947_PAGE0,
+				       3, &__val);
+		lsb = 50000;
+		break;
+	case hwmon_power_input_highest:
+		ret = ltc2947_val_read(st, LTC2947_REG_POWER_MAX, LTC2947_PAGE0,
+				       2, &__val);
+		break;
+	case hwmon_power_input_lowest:
+		ret = ltc2947_val_read(st, LTC2947_REG_POWER_MIN, LTC2947_PAGE0,
+				       2, &__val);
+		break;
+	case hwmon_power_max_alarm:
+		return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
+					  LTC2947_MAX_POWER_MASK, val);
+	case hwmon_power_min_alarm:
+		return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
+					  LTC2947_MIN_POWER_MASK, val);
+	case hwmon_power_max:
+		ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_H,
+				       LTC2947_PAGE1, 2, &__val);
+		break;
+	case hwmon_power_min:
+		ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_L,
+				       LTC2947_PAGE1, 2, &__val);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	*val = __val * lsb;
+
+	return 0;
+}
+
+static int ltc2947_read_curr(struct device *dev, const u32 attr, long *val)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	int ret;
+	u8 lsb = 12; /* in mA */
+	s64 __val = 0;
+
+	switch (attr) {
+	case hwmon_curr_input:
+		ret = ltc2947_val_read(st, LTC2947_REG_CURRENT,
+				       LTC2947_PAGE0, 3, &__val);
+		lsb = 3;
+		break;
+	case hwmon_curr_highest:
+		ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MAX,
+				       LTC2947_PAGE0, 2, &__val);
+		break;
+	case hwmon_curr_lowest:
+		ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MIN,
+				       LTC2947_PAGE0, 2, &__val);
+		break;
+	case hwmon_curr_max_alarm:
+		return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
+					  LTC2947_MAX_CURRENT_MASK, val);
+	case hwmon_curr_min_alarm:
+		return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
+					  LTC2947_MIN_CURRENT_MASK, val);
+	case hwmon_curr_max:
+		ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_H,
+				       LTC2947_PAGE1, 2, &__val);
+		break;
+	case hwmon_curr_min:
+		ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_L,
+				       LTC2947_PAGE1, 2, &__val);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	*val = __val * lsb;
+
+	return 0;
+}
+
+static int ltc2947_read_in(struct device *dev, const u32 attr, long *val,
+			   const int channel)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	int ret;
+	u8 lsb = 2; /* in mV */
+	s64 __val = 0;
+
+	if (channel < 0 || channel > LTC2947_VOLTAGE_DVCC_CHAN) {
+		dev_err(st->dev, "Invalid chan%d for voltage", channel);
+		return -EINVAL;
+	}
+
+	switch (attr) {
+	case hwmon_in_input:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			ret = ltc2947_val_read(st, LTC2947_REG_DVCC,
+					       LTC2947_PAGE0, 2, &__val);
+			lsb = 145;
+		} else {
+			ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE,
+					       LTC2947_PAGE0, 2, &__val);
+		}
+		break;
+	case hwmon_in_highest:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MAX,
+					       LTC2947_PAGE0, 2, &__val);
+			lsb = 145;
+		} else {
+			ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MAX,
+					       LTC2947_PAGE0, 2, &__val);
+		}
+		break;
+	case hwmon_in_lowest:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MIN,
+					       LTC2947_PAGE0, 2, &__val);
+			lsb = 145;
+		} else {
+			ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MIN,
+					       LTC2947_PAGE0, 2, &__val);
+		}
+		break;
+	case hwmon_in_max_alarm:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
+			return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC,
+						  LTC2947_MAX_VOLTAGE_MASK,
+						  val);
+
+		return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+					  LTC2947_MAX_VOLTAGE_MASK, val);
+	case hwmon_in_min_alarm:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
+			return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC,
+						  LTC2947_MIN_VOLTAGE_MASK,
+						  val);
+
+		return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
+					  LTC2947_MIN_VOLTAGE_MASK, val);
+	case hwmon_in_max:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_H,
+					       LTC2947_PAGE1, 2, &__val);
+			lsb = 145;
+		} else {
+			ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_H,
+					       LTC2947_PAGE1, 2, &__val);
+		}
+		break;
+	case hwmon_in_min:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_L,
+					       LTC2947_PAGE1, 2, &__val);
+			lsb = 145;
+		} else {
+			ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_L,
+					       LTC2947_PAGE1, 2, &__val);
+		}
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	if (ret)
+		return ret;
+
+	*val = __val * lsb;
+
+	return 0;
+}
+
+static int ltc2947_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_in:
+		return ltc2947_read_in(dev, attr, val, channel);
+	case hwmon_curr:
+		return ltc2947_read_curr(dev, attr, val);
+	case hwmon_power:
+		return ltc2947_read_power(dev, attr, val);
+	case hwmon_temp:
+		return ltc2947_read_temp(dev, attr, val, channel);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_write_temp(struct device *dev, const u32 attr,
+			      long val, const int channel)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+
+	if (channel < 0 || channel > LTC2947_TEMP_FAN_CHAN) {
+		dev_err(st->dev, "Invalid chan%d for temperature", channel);
+		return -EINVAL;
+	}
+
+	switch (attr) {
+	case hwmon_temp_reset_history:
+		if (val != 1)
+			return -EINVAL;
+		return ltc2947_reset_history(st, LTC2947_REG_TEMP_MAX,
+					     LTC2947_REG_TEMP_MIN);
+	case hwmon_temp_max:
+		val = clamp_val(val, TEMP_MIN, TEMP_MAX);
+		if (channel == LTC2947_TEMP_FAN_CHAN) {
+			if (!st->gpio_out)
+				return -ENOTSUPP;
+
+			return ltc2947_val_write(st,
+					LTC2947_REG_TEMP_FAN_THRE_H,
+					LTC2947_PAGE1, 2,
+					DIV_ROUND_CLOSEST(val - 550, 204));
+		}
+
+		return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_H,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val - 550, 204));
+	case hwmon_temp_min:
+		val = clamp_val(val, TEMP_MIN, TEMP_MAX);
+		if (channel == LTC2947_TEMP_FAN_CHAN) {
+			if (!st->gpio_out)
+				return -ENOTSUPP;
+
+			return ltc2947_val_write(st,
+					LTC2947_REG_TEMP_FAN_THRE_L,
+					LTC2947_PAGE1, 2,
+					DIV_ROUND_CLOSEST(val - 550, 204));
+		}
+
+		return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_L,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val - 550, 204));
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_write_power(struct device *dev, const u32 attr,
+			       long val)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_power_reset_history:
+		if (val != 1)
+			return -EINVAL;
+		return ltc2947_reset_history(st, LTC2947_REG_POWER_MAX,
+					     LTC2947_REG_POWER_MIN);
+	case hwmon_power_max:
+		val = clamp_val(val, POWER_MIN, POWER_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 200000));
+	case hwmon_power_min:
+		val = clamp_val(val, POWER_MIN, POWER_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 200000));
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_write_curr(struct device *dev, const u32 attr,
+			      long val)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_curr_reset_history:
+		if (val != 1)
+			return -EINVAL;
+		return ltc2947_reset_history(st, LTC2947_REG_CURRENT_MAX,
+					     LTC2947_REG_CURRENT_MIN);
+	case hwmon_curr_max:
+		val = clamp_val(val, CURRENT_MIN, CURRENT_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_H,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 12));
+	case hwmon_curr_min:
+		val = clamp_val(val, CURRENT_MIN, CURRENT_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_L,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 12));
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_write_in(struct device *dev, const u32 attr, long val,
+			    const int channel)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+
+	if (channel > LTC2947_VOLTAGE_DVCC_CHAN) {
+		dev_err(st->dev, "Invalid chan%d for voltage", channel);
+		return -EINVAL;
+	}
+
+	switch (attr) {
+	case hwmon_in_reset_history:
+		if (val != 1)
+			return -EINVAL;
+
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
+			return ltc2947_reset_history(st, LTC2947_REG_DVCC_MAX,
+						     LTC2947_REG_DVCC_MIN);
+
+		return ltc2947_reset_history(st, LTC2947_REG_VOLTAGE_MAX,
+					     LTC2947_REG_VOLTAGE_MIN);
+	case hwmon_in_max:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			val = clamp_val(val, VDVCC_MIN, VDVCC_MAX);
+			return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_H,
+						 LTC2947_PAGE1, 2,
+						 DIV_ROUND_CLOSEST(val, 145));
+		}
+
+		val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_H,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 2));
+	case hwmon_in_min:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
+			val = clamp_val(val, VDVCC_MIN, VDVCC_MAX);
+			return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_L,
+						 LTC2947_PAGE1, 2,
+						 DIV_ROUND_CLOSEST(val, 145));
+		}
+
+		val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX);
+		return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_L,
+					 LTC2947_PAGE1, 2,
+					 DIV_ROUND_CLOSEST(val, 2));
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_write(struct device *dev,
+			 enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_in:
+		return ltc2947_write_in(dev, attr, val, channel);
+	case hwmon_curr:
+		return ltc2947_write_curr(dev, attr, val);
+	case hwmon_power:
+		return ltc2947_write_power(dev, attr, val);
+	case hwmon_temp:
+		return ltc2947_write_temp(dev, attr, val, channel);
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_read_labels(struct device *dev,
+			       enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_in:
+		if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
+			*str = "DVCC";
+		else
+			*str = "VP-VM";
+		return 0;
+	case hwmon_curr:
+		*str = "IP-IM";
+		return 0;
+	case hwmon_temp:
+		if (channel == LTC2947_TEMP_FAN_CHAN)
+			*str = "TEMPFAN";
+		else
+			*str = "Ambient";
+		return 0;
+	case hwmon_power:
+		*str = "Power";
+		return 0;
+	default:
+		return -ENOTSUPP;
+	}
+}
+
+static int ltc2947_in_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_in_input:
+	case hwmon_in_highest:
+	case hwmon_in_lowest:
+	case hwmon_in_max_alarm:
+	case hwmon_in_min_alarm:
+	case hwmon_in_label:
+		return 0444;
+	case hwmon_in_reset_history:
+		return 0200;
+	case hwmon_in_max:
+	case hwmon_in_min:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int ltc2947_curr_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_curr_input:
+	case hwmon_curr_highest:
+	case hwmon_curr_lowest:
+	case hwmon_curr_max_alarm:
+	case hwmon_curr_min_alarm:
+	case hwmon_curr_label:
+		return 0444;
+	case hwmon_curr_reset_history:
+		return 0200;
+	case hwmon_curr_max:
+	case hwmon_curr_min:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int ltc2947_power_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_power_input:
+	case hwmon_power_input_highest:
+	case hwmon_power_input_lowest:
+	case hwmon_power_label:
+	case hwmon_power_max_alarm:
+	case hwmon_power_min_alarm:
+		return 0444;
+	case hwmon_power_reset_history:
+		return 0200;
+	case hwmon_power_max:
+	case hwmon_power_min:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int ltc2947_temp_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_highest:
+	case hwmon_temp_lowest:
+	case hwmon_temp_max_alarm:
+	case hwmon_temp_min_alarm:
+	case hwmon_temp_label:
+		return 0444;
+	case hwmon_temp_reset_history:
+		return 0200;
+	case hwmon_temp_max:
+	case hwmon_temp_min:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static umode_t ltc2947_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_in:
+		return ltc2947_in_is_visible(attr);
+	case hwmon_curr:
+		return ltc2947_curr_is_visible(attr);
+	case hwmon_power:
+		return ltc2947_power_is_visible(attr);
+	case hwmon_temp:
+		return ltc2947_temp_is_visible(attr);
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *ltc2947_info[] = {
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
+			   HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY |
+			   HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM |
+			   HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
+			   HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY |
+			   HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM |
+			   HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST |
+			   HWMON_C_MAX | HWMON_C_MIN | HWMON_C_RESET_HISTORY |
+			   HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM |
+			   HWMON_C_LABEL),
+	HWMON_CHANNEL_INFO(power,
+			   HWMON_P_INPUT | HWMON_P_INPUT_LOWEST |
+			   HWMON_P_INPUT_HIGHEST | HWMON_P_MAX | HWMON_P_MIN |
+			   HWMON_P_RESET_HISTORY | HWMON_P_MAX_ALARM |
+			   HWMON_P_MIN_ALARM | HWMON_P_LABEL),
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_LOWEST | HWMON_T_HIGHEST |
+			   HWMON_T_MAX | HWMON_T_MIN | HWMON_T_RESET_HISTORY |
+			   HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
+			   HWMON_T_LABEL,
+			   HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | HWMON_T_MAX |
+			   HWMON_T_MIN | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops ltc2947_hwmon_ops = {
+	.is_visible = ltc2947_is_visible,
+	.read = ltc2947_read,
+	.write = ltc2947_write,
+	.read_string = ltc2947_read_labels,
+};
+
+static const struct hwmon_chip_info ltc2947_chip_info = {
+	.ops = &ltc2947_hwmon_ops,
+	.info = ltc2947_info,
+};
+
+/* energy attributes are 6bytes wide so we need u64 */
+static SENSOR_DEVICE_ATTR(energy1_input, 0444, ltc2947_show_value, NULL,
+			  LTC2947_REG_ENERGY1);
+static SENSOR_DEVICE_ATTR(energy2_input, 0444, ltc2947_show_value, NULL,
+			  LTC2947_REG_ENERGY2);
+
+static struct attribute *ltc2947_attrs[] = {
+	&sensor_dev_attr_energy1_input.dev_attr.attr,
+	&sensor_dev_attr_energy2_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ltc2947);
+
+static void ltc2947_clk_disable(void *data)
+{
+	struct clk *extclk = data;
+
+	clk_disable_unprepare(extclk);
+}
+
+static int ltc2947_setup(struct ltc2947_data *st)
+{
+	int ret;
+	struct clk *extclk;
+	u32 dummy, deadband, pol;
+	u32 accum[2];
+
+	/* clear status register by reading it */
+	ret = regmap_read(st->map, LTC2947_REG_STATUS, &dummy);
+	if (ret)
+		return ret;
+	/*
+	 * Set max/min for power here since the default values x scale
+	 * would overflow on 32bit arch
+	 */
+	ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H, LTC2947_PAGE1, 2,
+				POWER_MAX / 200000);
+	if (ret)
+		return ret;
+
+	ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L, LTC2947_PAGE1, 2,
+				POWER_MIN / 200000);
+	if (ret)
+		return ret;
+
+	/* check external clock presence */
+	extclk = devm_clk_get(st->dev, NULL);
+	if (!IS_ERR(extclk)) {
+		unsigned long rate_hz;
+		u8 pre = 0, div, tbctl;
+		u64 aux;
+
+		/* let's calculate and set the right valus in TBCTL */
+		rate_hz = clk_get_rate(extclk);
+		if (rate_hz < LTC2947_CLK_MIN || rate_hz > LTC2947_CLK_MAX) {
+			dev_err(st->dev, "Invalid rate:%lu for external clock",
+				rate_hz);
+			return -EINVAL;
+		}
+
+		ret = clk_prepare_enable(extclk);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(st->dev, ltc2947_clk_disable,
+					       extclk);
+		if (ret)
+			return ret;
+		/* as in table 1 of the datasheet */
+		if (rate_hz >= LTC2947_CLK_MIN && rate_hz <= 1000000)
+			pre = 0;
+		else if (rate_hz > 1000000 && rate_hz <= 2000000)
+			pre = 1;
+		else if (rate_hz > 2000000 && rate_hz <= 4000000)
+			pre = 2;
+		else if (rate_hz > 4000000 && rate_hz <= 8000000)
+			pre = 3;
+		else if (rate_hz > 8000000 && rate_hz <= 16000000)
+			pre = 4;
+		else if (rate_hz > 16000000 && rate_hz <= LTC2947_CLK_MAX)
+			pre = 5;
+		/*
+		 * Div is given by:
+		 *	floor(fref / (2^PRE * 32768))
+		 */
+		div = rate_hz / ((1 << pre) * 32768);
+		tbctl = LTC2947_PRE(pre) | LTC2947_DIV(div);
+
+		ret = regmap_write(st->map, LTC2947_REG_TBCTL, tbctl);
+		if (ret)
+			return ret;
+		/*
+		 * The energy lsb is given by (in W*s):
+		 *      06416 * (1/fref) * 2^PRE * (DIV + 1)
+		 * The value is multiplied by 10E9
+		 */
+		aux = (div + 1) * ((1 << pre) * 641600000ULL);
+		st->lsb_energy = DIV_ROUND_CLOSEST_ULL(aux, rate_hz);
+	} else {
+		/* 19.89E-6 * 10E9 */
+		st->lsb_energy = 19890;
+	}
+	ret = of_property_read_u32_array(st->dev->of_node,
+					 "adi,accumulator-ctl-pol", accum,
+					  ARRAY_SIZE(accum));
+	if (!ret) {
+		u32 accum_reg = LTC2947_ACCUM_POL_1(accum[0]) |
+				LTC2947_ACCUM_POL_2(accum[1]);
+
+		ret = regmap_write(st->map, LTC2947_REG_ACCUM_POL, accum_reg);
+		if (ret)
+			return ret;
+	}
+	ret = of_property_read_u32(st->dev->of_node,
+				   "adi,accumulation-deadband-microamp",
+				   &deadband);
+	if (!ret) {
+		/* the LSB is the same as the current, so 3mA */
+		ret = regmap_write(st->map, LTC2947_REG_ACCUM_DEADBAND,
+				   deadband / (1000 * 3));
+		if (ret)
+			return ret;
+	}
+	/* check gpio cfg */
+	ret = of_property_read_u32(st->dev->of_node, "adi,gpio-out-pol", &pol);
+	if (!ret) {
+		/* setup GPIO as output */
+		u32 gpio_ctl = LTC2947_GPIO_EN(1) | LTC2947_GPIO_FAN_EN(1) |
+			LTC2947_GPIO_FAN_POL(pol);
+
+		st->gpio_out = true;
+		ret = regmap_write(st->map, LTC2947_REG_GPIOSTATCTL, gpio_ctl);
+		if (ret)
+			return ret;
+	}
+	ret = of_property_read_u32_array(st->dev->of_node, "adi,gpio-in-accum",
+					 accum, ARRAY_SIZE(accum));
+	if (!ret) {
+		/*
+		 * Setup the accum options. The gpioctl is already defined as
+		 * input by default.
+		 */
+		u32 accum_val = LTC2947_ACCUM_POL_1(accum[0]) |
+				LTC2947_ACCUM_POL_2(accum[1]);
+
+		if (st->gpio_out) {
+			dev_err(st->dev,
+				"Cannot have input gpio config if already configured as output");
+			return -EINVAL;
+		}
+
+		ret = regmap_write(st->map, LTC2947_REG_GPIO_ACCUM, accum_val);
+		if (ret)
+			return ret;
+	}
+
+	/* set continuos mode */
+	return regmap_update_bits(st->map, LTC2947_REG_CTRL,
+				  LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1));
+}
+
+int ltc2947_core_probe(struct regmap *map, const char *name)
+{
+	struct ltc2947_data *st;
+	struct device *dev = regmap_get_device(map);
+	struct device *hwmon;
+	int ret;
+
+	st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->map = map;
+	st->dev = dev;
+	dev_set_drvdata(dev, st);
+	mutex_init(&st->lock);
+
+	ret = ltc2947_setup(st);
+	if (ret)
+		return ret;
+
+	hwmon = devm_hwmon_device_register_with_info(dev, name, st,
+						     &ltc2947_chip_info,
+						     ltc2947_groups);
+	return PTR_ERR_OR_ZERO(hwmon);
+}
+EXPORT_SYMBOL_GPL(ltc2947_core_probe);
+
+static int __maybe_unused ltc2947_resume(struct device *dev)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+	u32 ctrl = 0;
+	int ret;
+
+	/* dummy read to wake the device */
+	ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl);
+	if (ret)
+		return ret;
+	/*
+	 * Wait for the device. It takes 100ms to wake up so, 10ms extra
+	 * should be enough.
+	 */
+	msleep(110);
+	ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl);
+	if (ret)
+		return ret;
+	/* ctrl should be 0 */
+	if (ctrl != 0) {
+		dev_err(st->dev, "Device failed to wake up, ctl:%02X\n", ctrl);
+		return -ETIMEDOUT;
+	}
+
+	/* set continuous mode */
+	return regmap_update_bits(st->map, LTC2947_REG_CTRL,
+				  LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1));
+}
+
+static int __maybe_unused ltc2947_suspend(struct device *dev)
+{
+	struct ltc2947_data *st = dev_get_drvdata(dev);
+
+	return regmap_update_bits(st->map, LTC2947_REG_CTRL,
+				  LTC2947_SHUTDOWN_MASK, 1);
+}
+
+SIMPLE_DEV_PM_OPS(ltc2947_pm_ops, ltc2947_suspend, ltc2947_resume);
+EXPORT_SYMBOL_GPL(ltc2947_pm_ops);
+
+const struct of_device_id ltc2947_of_match[] = {
+	{ .compatible = "adi,ltc2947" },
+	{}
+};
+EXPORT_SYMBOL_GPL(ltc2947_of_match);
+MODULE_DEVICE_TABLE(of, ltc2947_of_match);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("LTC2947 power and energy monitor core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ltc2947-i2c.c b/drivers/hwmon/ltc2947-i2c.c
new file mode 100644
index 000000000000..cf6074b110ae
--- /dev/null
+++ b/drivers/hwmon/ltc2947-i2c.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices LTC2947 high precision power and energy monitor over I2C
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "ltc2947.h"
+
+static const struct regmap_config ltc2947_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int ltc2947_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+{
+	struct regmap *map;
+
+	map = devm_regmap_init_i2c(i2c, &ltc2947_regmap_config);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	return ltc2947_core_probe(map, i2c->name);
+}
+
+static const struct i2c_device_id ltc2947_id[] = {
+	{"ltc2947", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2947_id);
+
+static struct i2c_driver ltc2947_driver = {
+	.driver = {
+		.name = "ltc2947",
+		.of_match_table = ltc2947_of_match,
+		.pm = &ltc2947_pm_ops,
+	},
+	.probe = ltc2947_probe,
+	.id_table = ltc2947_id,
+};
+module_i2c_driver(ltc2947_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("LTC2947 I2C power and energy monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ltc2947-spi.c b/drivers/hwmon/ltc2947-spi.c
new file mode 100644
index 000000000000..c24ca569db1b
--- /dev/null
+++ b/drivers/hwmon/ltc2947-spi.c
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices LTC2947 high precision power and energy monitor over SPI
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "ltc2947.h"
+
+static const struct regmap_config ltc2947_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.read_flag_mask = BIT(0),
+};
+
+static int ltc2947_probe(struct spi_device *spi)
+{
+	struct regmap *map;
+
+	map = devm_regmap_init_spi(spi, &ltc2947_regmap_config);
+	if (IS_ERR(map))
+		return PTR_ERR(map);
+
+	return ltc2947_core_probe(map, spi_get_device_id(spi)->name);
+}
+
+static const struct spi_device_id ltc2947_id[] = {
+	{"ltc2947", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, ltc2947_id);
+
+static struct spi_driver ltc2947_driver = {
+	.driver = {
+		.name = "ltc2947",
+		.of_match_table = ltc2947_of_match,
+		.pm = &ltc2947_pm_ops,
+	},
+	.probe = ltc2947_probe,
+	.id_table = ltc2947_id,
+};
+module_spi_driver(ltc2947_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("LTC2947 SPI power and energy monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/ltc2947.h b/drivers/hwmon/ltc2947.h
new file mode 100644
index 000000000000..5b8ff81a3dba
--- /dev/null
+++ b/drivers/hwmon/ltc2947.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _LINUX_LTC2947_H
+#define _LINUX_LTC2947_H
+
+struct regmap;
+
+extern const struct of_device_id ltc2947_of_match[];
+extern const struct dev_pm_ops ltc2947_pm_ops;
+
+int ltc2947_core_probe(struct regmap *map, const char *name);
+
+#endif