Merge commit 'v2.6.38' into x86/mm

Conflicts:
	arch/x86/mm/numa_64.c

Merge reason: Resolve the conflict, update the branch to .38.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 files changed, 68 insertions, 20 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 773e484f1646..297bc9a7d6e6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -238,13 +238,13 @@ config SENSORS_K8TEMP
 	  will be called k8temp.
 
 config SENSORS_K10TEMP
-	tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor"
+	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
 	depends on X86 && PCI
 	help
 	  If you say yes here you get support for the temperature
 	  sensor(s) inside your CPU. Supported are later revisions of
-	  the AMD Family 10h and all revisions of the AMD Family 11h
-	  microarchitectures.
+	  the AMD Family 10h and all revisions of the AMD Family 11h,
+	  12h (Llano), and 14h (Brazos) microarchitectures.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called k10temp.
@@ -455,13 +455,14 @@ config SENSORS_JZ4740
 	  called jz4740-hwmon.
 
 config SENSORS_JC42
-	tristate "JEDEC JC42.4 compliant temperature sensors"
+	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 	depends on I2C
 	help
-	  If you say yes here you get support for Jedec JC42.4 compliant
-	  temperature sensors. Support will include, but not be limited to,
-	  ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
-	  MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3.
+	  If you say yes here, you get support for JEDEC JC42.4 compliant
+	  temperature sensors, which are used on many DDR3 memory modules for
+	  mobile devices and servers.  Support will include, but not be limited
+	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
+	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called jc42.
@@ -574,7 +575,7 @@ config SENSORS_LM85
 	help
 	  If you say yes here you get support for National Semiconductor LM85
 	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
-	  EMC6D101 and EMC6D102.
+	  EMC6D101, EMC6D102, and EMC6D103.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm85.
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 86d822aa9bbf..d46c0c758ddf 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -242,6 +242,7 @@ static const struct i2c_device_id ad7414_id[] = {
 	{ "ad7414", 0 },
 	{}
 };
+MODULE_DEVICE_TABLE(i2c, ad7414_id);
 
 static struct i2c_driver ad7414_driver = {
 	.driver = {
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index f13c843a2964..5cc3e3784b42 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -334,6 +334,7 @@ static const struct i2c_device_id adt7411_id[] = {
 	{ "adt7411", 0 },
 	{ }
 };
+MODULE_DEVICE_TABLE(i2c, adt7411_id);
 
 static struct i2c_driver adt7411_driver = {
 	.driver		= {
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 3f49dd376f02..6e06019015a5 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -37,7 +37,7 @@
 #define SIO_F71858FG_LD_HWM	0x02	/* Hardware monitor logical device */
 #define SIO_F71882FG_LD_HWM	0x04	/* Hardware monitor logical device */
 #define SIO_UNLOCK_KEY		0x87	/* Key to enable Super-I/O */
-#define SIO_LOCK_KEY		0xAA	/* Key to diasble Super-I/O */
+#define SIO_LOCK_KEY		0xAA	/* Key to disable Super-I/O */
 
 #define SIO_REG_LDSEL		0x07	/* Logical device select */
 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
@@ -2111,7 +2111,6 @@ static int f71882fg_remove(struct platform_device *pdev)
 	int nr_fans = (data->type == f71882fg) ? 4 : 3;
 	u8 start_reg = f71882fg_read8(data, F71882FG_REG_START);
 
-	platform_set_drvdata(pdev, NULL);
 	if (data->hwmon_dev)
 		hwmon_device_unregister(data->hwmon_dev);
 
@@ -2178,6 +2177,7 @@ static int f71882fg_remove(struct platform_device *pdev)
 		}
 	}
 
+	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 
 	return 0;
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 340fc78c8dde..934991237061 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = {
 
 /* Configuration register defines */
 #define JC42_CFG_CRIT_ONLY	(1 << 2)
+#define JC42_CFG_TCRIT_LOCK	(1 << 6)
+#define JC42_CFG_EVENT_LOCK	(1 << 7)
 #define JC42_CFG_SHUTDOWN	(1 << 8)
 #define JC42_CFG_HYST_SHIFT	9
 #define JC42_CFG_HYST_MASK	0x03
@@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct jc42_data *data = i2c_get_clientdata(client);
-	long val;
+	unsigned long val;
 	int diff, hyst;
 	int err;
 	int ret = count;
@@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev,
 
 static DEVICE_ATTR(temp1_input, S_IRUGO,
 		   show_temp_input, NULL);
-static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit, S_IRUGO,
 		   show_temp_crit, set_temp_crit);
-static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_min, S_IRUGO,
 		   show_temp_min, set_temp_min);
-static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_max, S_IRUGO,
 		   show_temp_max, set_temp_max);
 
-static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
+static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
 		   show_temp_crit_hyst, set_temp_crit_hyst);
 static DEVICE_ATTR(temp1_max_hyst, S_IRUGO,
 		   show_temp_max_hyst, NULL);
@@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = {
 	NULL
 };
 
+static mode_t jc42_attribute_mode(struct kobject *kobj,
+				  struct attribute *attr, int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct jc42_data *data = i2c_get_clientdata(client);
+	unsigned int config = data->config;
+	bool readonly;
+
+	if (attr == &dev_attr_temp1_crit.attr)
+		readonly = config & JC42_CFG_TCRIT_LOCK;
+	else if (attr == &dev_attr_temp1_min.attr ||
+		 attr == &dev_attr_temp1_max.attr)
+		readonly = config & JC42_CFG_EVENT_LOCK;
+	else if (attr == &dev_attr_temp1_crit_hyst.attr)
+		readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK);
+	else
+		readonly = true;
+
+	return S_IRUGO | (readonly ? 0 : S_IWUSR);
+}
+
 static const struct attribute_group jc42_group = {
 	.attrs = jc42_attributes,
+	.is_visible = jc42_attribute_mode,
 };
 
 /* Return 0 if detection is successful, -ENODEV otherwise */
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index da5a2404cd3e..82bf65aa2968 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
 /*
- * k10temp.c - AMD Family 10h/11h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
  *
@@ -25,7 +25,7 @@
 #include <linux/pci.h>
 #include <asm/processor.h>
 
-MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor");
+MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor");
 MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
 MODULE_LICENSE("GPL");
 
@@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev)
 static const struct pci_device_id k10temp_id_table[] = {
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
+	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index 1e229847f37a..d2cc28660816 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 enum chips {
 	any_chip, lm85b, lm85c,
 	adm1027, adt7463, adt7468,
-	emc6d100, emc6d102
+	emc6d100, emc6d102, emc6d103
 };
 
 /* The LM85 registers */
@@ -90,6 +90,9 @@ enum chips {
 #define	LM85_VERSTEP_EMC6D100_A0        0x60
 #define	LM85_VERSTEP_EMC6D100_A1        0x61
 #define	LM85_VERSTEP_EMC6D102		0x65
+#define	LM85_VERSTEP_EMC6D103_A0	0x68
+#define	LM85_VERSTEP_EMC6D103_A1	0x69
+#define	LM85_VERSTEP_EMC6D103S		0x6A	/* Also known as EMC6D103:A2 */
 
 #define	LM85_REG_CONFIG			0x40
 
@@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = {
 	{ "emc6d100", emc6d100 },
 	{ "emc6d101", emc6d100 },
 	{ "emc6d102", emc6d102 },
+	{ "emc6d103", emc6d103 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, lm85_id);
@@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
 		case LM85_VERSTEP_EMC6D102:
 			type_name = "emc6d102";
 			break;
+		case LM85_VERSTEP_EMC6D103_A0:
+		case LM85_VERSTEP_EMC6D103_A1:
+			type_name = "emc6d103";
+			break;
+		/*
+		 * Registers apparently missing in EMC6D103S/EMC6D103:A2
+		 * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102
+		 * (according to the data sheets), but used unconditionally
+		 * in the driver: 62[5:7], 6D[0:7], and 6E[0:7].
+		 * So skip EMC6D103S for now.
+		case LM85_VERSTEP_EMC6D103S:
+			type_name = "emc6d103s";
+			break;
+		 */
 		}
 	} else {
 		dev_dbg(&adapter->dev,
@@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client,
 	case adt7468:
 	case emc6d100:
 	case emc6d102:
+	case emc6d103:
 		data->freq_map = adm1027_freq_map;
 		break;
 	default:
@@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev)
 			/* More alarm bits */
 			data->alarms |= lm85_read_value(client,
 						EMC6D100_REG_ALARM3) << 16;
-		} else if (data->type == emc6d102) {
+		} else if (data->type == emc6d102 || data->type == emc6d103) {
 			/* Have to read LSB bits after the MSB ones because
 			   the reading of the MSB bits has frozen the
 			   LSBs (backward from the ADM1027).