summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorSudeep Holla <sudeep.holla@arm.com>2015-10-28 17:17:31 +0000
committerGuenter Roeck <linux@roeck-us.net>2015-11-16 09:59:50 -0800
commitcef03d7e66bd70c4baf61dd2431cf8de250834de (patch)
treee8a2296d6f0cc62c2224dd849ccf908ef5e86848 /drivers/hwmon
parentd42d5b6f729929f2bbd17d22a2b223b7138470da (diff)
downloadlinux-cef03d7e66bd70c4baf61dd2431cf8de250834de.tar.bz2
hwmon: (scpi) skip unsupported sensors properly
Currently it's assumed that firmware exports only the class of sensors supported by the driver. However with newer firmware or SCPI protocol revision, support for newer classes of sensors can be present. The driver fails to probe with the following warning if an unsupported class of sensor is encountered in the firmware. sysfs: cannot create duplicate filename '/devices/platform/scpi/scpi:sensors/hwmon/hwmon0/' ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:31 Modules linked in: CPU: 0 PID: 6 Comm: kworker/u12:0 Not tainted 4.3.0-rc7 #137 Hardware name: ARM Juno development board (r0) (DT) Workqueue: deferwq deferred_probe_work_func PC is at sysfs_warn_dup+0x54/0x78 LR is at sysfs_warn_dup+0x54/0x78 This patch fixes the above issue by skipping through the unsupported class of SCPI sensors. Fixes: 68acc77a2d51 ("hwmon: Support thermal zones registration for SCP temperature sensors") Fixes: ea98b29a05e9 ("hwmon: Support sensors exported via ARM SCP interface") Cc: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/scpi-hwmon.c21
1 files changed, 11 insertions, 10 deletions
diff --git a/drivers/hwmon/scpi-hwmon.c b/drivers/hwmon/scpi-hwmon.c
index 2c1241bbf9af..7e20567bc369 100644
--- a/drivers/hwmon/scpi-hwmon.c
+++ b/drivers/hwmon/scpi-hwmon.c
@@ -117,7 +117,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
struct scpi_ops *scpi_ops;
struct device *hwdev, *dev = &pdev->dev;
struct scpi_sensors *scpi_sensors;
- int ret;
+ int ret, idx;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
@@ -146,8 +146,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
scpi_sensors->scpi_ops = scpi_ops;
- for (i = 0; i < nr_sensors; i++) {
- struct sensor_data *sensor = &scpi_sensors->data[i];
+ for (i = 0, idx = 0; i < nr_sensors; i++) {
+ struct sensor_data *sensor = &scpi_sensors->data[idx];
ret = scpi_ops->sensor_get_info(i, &sensor->info);
if (ret)
@@ -183,7 +183,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
num_power++;
break;
default:
- break;
+ continue;
}
sensor->dev_attr_input.attr.mode = S_IRUGO;
@@ -194,11 +194,12 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
sensor->dev_attr_label.show = scpi_show_label;
sensor->dev_attr_label.attr.name = sensor->label;
- scpi_sensors->attrs[i << 1] = &sensor->dev_attr_input.attr;
- scpi_sensors->attrs[(i << 1) + 1] = &sensor->dev_attr_label.attr;
+ scpi_sensors->attrs[idx << 1] = &sensor->dev_attr_input.attr;
+ scpi_sensors->attrs[(idx << 1) + 1] = &sensor->dev_attr_label.attr;
- sysfs_attr_init(scpi_sensors->attrs[i << 1]);
- sysfs_attr_init(scpi_sensors->attrs[(i << 1) + 1]);
+ sysfs_attr_init(scpi_sensors->attrs[idx << 1]);
+ sysfs_attr_init(scpi_sensors->attrs[(idx << 1) + 1]);
+ idx++;
}
scpi_sensors->group.attrs = scpi_sensors->attrs;
@@ -236,8 +237,8 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
zone->sensor_id = i;
zone->scpi_sensors = scpi_sensors;
- zone->tzd = thermal_zone_of_sensor_register(dev, i, zone,
- &scpi_sensor_ops);
+ zone->tzd = thermal_zone_of_sensor_register(dev,
+ sensor->info.sensor_id, zone, &scpi_sensor_ops);
/*
* The call to thermal_zone_of_sensor_register returns
* an error for sensors that are not associated with