hwmon: (via686a) Fix checkpatch issues

Fixed:
ERROR: do not use assignment in if condition
ERROR: open brace '{' following function declarations go on the next line
ERROR: space prohibited before that close parenthesis ')'
ERROR: space required after that ',' (ctx:VxV)
ERROR: spaces required around that '==' (ctx:VxV)
ERROR: spaces required around that ':' (ctx:VxV)
ERROR: spaces required around that '?' (ctx:VxV)
ERROR: that open brace { should be on the previous line
WARNING: line over 80 characters
WARNING: simple_strtol is obsolete, use kstrtol instead
WARNING: simple_strtoul is obsolete, use kstrtoul instead

Modify multi-line comments to follow Documentation/CodingStyle.

Not fixed (false positive):
ERROR: Macros with multiple statements should be enclosed in a do - while loop

Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 207 insertions, 148 deletions

diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index 1424f0a1e498..288135d85e11 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -1,34 +1,35 @@
 /*
-    via686a.c - Part of lm_sensors, Linux kernel modules
-		for hardware monitoring
-
-    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
-			Kyösti Mälkki <kmalkki@cc.hut.fi>,
-			Mark Studebaker <mdsxyz123@yahoo.com>,
-			and Bob Dougherty <bobd@stanford.edu>
-    (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
-    <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * via686a.c - Part of lm_sensors, Linux kernel modules
+ *	       for hardware monitoring
+ *
+ * Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
+ *			      Kyösti Mälkki <kmalkki@cc.hut.fi>,
+ *			      Mark Studebaker <mdsxyz123@yahoo.com>,
+ *			      and Bob Dougherty <bobd@stanford.edu>
+ *
+ * (Some conversion-factor data were contributed by Jonathan Teh Soon Yew
+ * <j.teh@iname.com> and Alex van Kaam <darkside@chello.nl>.)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 
 /*
-    Supports the Via VT82C686A, VT82C686B south bridges.
-    Reports all as a 686A.
-    Warning - only supports a single device.
-*/
+ * Supports the Via VT82C686A, VT82C686B south bridges.
+ * Reports all as a 686A.
+ * Warning - only supports a single device.
+ */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
@@ -47,8 +48,10 @@
 #include <linux/io.h>
 
 
-/* If force_addr is set to anything different from 0, we forcibly enable
-   the device at the given address. */
+/*
+ * If force_addr is set to anything different from 0, we forcibly enable
+ * the device at the given address.
+ */
 static unsigned short force_addr;
 module_param(force_addr, ushort, 0);
 MODULE_PARM_DESC(force_addr,
@@ -57,9 +60,9 @@ MODULE_PARM_DESC(force_addr,
 static struct platform_device *pdev;
 
 /*
-   The Via 686a southbridge has a LM78-like chip integrated on the same IC.
-   This driver is a customized copy of lm78.c
-*/
+ * The Via 686a southbridge has a LM78-like chip integrated on the same IC.
+ * This driver is a customized copy of lm78.c
+ */
 
 /* Many VIA686A constants specified below */
 
@@ -91,40 +94,46 @@ static const u8 VIA686A_REG_TEMP_HYST[]	= { 0x3a, 0x3e, 0x1e };
 #define VIA686A_REG_ALARM2	0x42
 #define VIA686A_REG_FANDIV	0x47
 #define VIA686A_REG_CONFIG	0x40
-/* The following register sets temp interrupt mode (bits 1-0 for temp1,
- 3-2 for temp2, 5-4 for temp3).  Modes are:
-    00 interrupt stays as long as value is out-of-range
-    01 interrupt is cleared once register is read (default)
-    10 comparator mode- like 00, but ignores hysteresis
-    11 same as 00 */
+/*
+ * The following register sets temp interrupt mode (bits 1-0 for temp1,
+ * 3-2 for temp2, 5-4 for temp3).  Modes are:
+ * 00 interrupt stays as long as value is out-of-range
+ * 01 interrupt is cleared once register is read (default)
+ * 10 comparator mode- like 00, but ignores hysteresis
+ * 11 same as 00
+ */
 #define VIA686A_REG_TEMP_MODE		0x4b
 /* We'll just assume that you want to set all 3 simultaneously: */
 #define VIA686A_TEMP_MODE_MASK		0x3F
 #define VIA686A_TEMP_MODE_CONTINUOUS	0x00
 
-/* Conversions. Limit checking is only done on the TO_REG
-   variants.
-
-********* VOLTAGE CONVERSIONS (Bob Dougherty) ********
- From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
- voltagefactor[0]=1.25/2628; (2628/1.25=2102.4)   // Vccp
- voltagefactor[1]=1.25/2628; (2628/1.25=2102.4)   // +2.5V
- voltagefactor[2]=1.67/2628; (2628/1.67=1573.7)   // +3.3V
- voltagefactor[3]=2.6/2628;  (2628/2.60=1010.8)   // +5V
- voltagefactor[4]=6.3/2628;  (2628/6.30=417.14)   // +12V
- in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
- That is:
- volts = (25*regVal+133)*factor
- regVal = (volts/factor-133)/25
- (These conversions were contributed by Jonathan Teh Soon Yew
- <j.teh@iname.com>) */
+/*
+ * Conversions. Limit checking is only done on the TO_REG
+ * variants.
+ *
+ ******** VOLTAGE CONVERSIONS (Bob Dougherty) ********
+ * From HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew):
+ * voltagefactor[0]=1.25/2628; (2628/1.25=2102.4)   // Vccp
+ * voltagefactor[1]=1.25/2628; (2628/1.25=2102.4)   // +2.5V
+ * voltagefactor[2]=1.67/2628; (2628/1.67=1573.7)   // +3.3V
+ * voltagefactor[3]=2.6/2628;  (2628/2.60=1010.8)   // +5V
+ * voltagefactor[4]=6.3/2628;  (2628/6.30=417.14)   // +12V
+ * in[i]=(data[i+2]*25.0+133)*voltagefactor[i];
+ * That is:
+ * volts = (25*regVal+133)*factor
+ * regVal = (volts/factor-133)/25
+ * (These conversions were contributed by Jonathan Teh Soon Yew
+ * <j.teh@iname.com>)
+ */
 static inline u8 IN_TO_REG(long val, int inNum)
 {
-	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
-	   Rounding is done (120500 is actually 133000 - 12500).
-	   Remember that val is expressed in 0.001V/bit, which is why we divide
-	   by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
-	   for the constants. */
+	/*
+	 * To avoid floating point, we multiply constants by 10 (100 for +12V).
+	 * Rounding is done (120500 is actually 133000 - 12500).
+	 * Remember that val is expressed in 0.001V/bit, which is why we divide
+	 * by an additional 10000 (100000 for +12V): 1000 for val and 10 (100)
+	 * for the constants.
+	 */
 	if (inNum <= 1)
 		return (u8)
 		    SENSORS_LIMIT((val * 21024 - 1205000) / 250000, 0, 255);
@@ -141,9 +150,11 @@ static inline u8 IN_TO_REG(long val, int inNum)
 
 static inline long IN_FROM_REG(u8 val, int inNum)
 {
-	/* To avoid floating point, we multiply constants by 10 (100 for +12V).
-	   We also multiply them by 1000 because we want 0.001V/bit for the
-	   output value. Rounding is done. */
+	/*
+	 * To avoid floating point, we multiply constants by 10 (100 for +12V).
+	 * We also multiply them by 1000 because we want 0.001V/bit for the
+	 * output value. Rounding is done.
+	 */
 	if (inNum <= 1)
 		return (long) ((250000 * val + 1330000 + 21024 / 2) / 21024);
 	else if (inNum == 2)
@@ -155,9 +166,11 @@ static inline long IN_FROM_REG(u8 val, int inNum)
 }
 
 /********* FAN RPM CONVERSIONS ********/
-/* Higher register values = slower fans (the fan's strobe gates a counter).
- But this chip saturates back at 0, not at 255 like all the other chips.
- So, 0 means 0 RPM */
+/*
+ * Higher register values = slower fans (the fan's strobe gates a counter).
+ * But this chip saturates back at 0, not at 255 like all the other chips.
+ * So, 0 means 0 RPM
+ */
 static inline u8 FAN_TO_REG(long rpm, int div)
 {
 	if (rpm == 0)
@@ -166,42 +179,45 @@ static inline u8 FAN_TO_REG(long rpm, int div)
 	return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 255);
 }
 
-#define FAN_FROM_REG(val,div) ((val)==0?0:(val)==255?0:1350000/((val)*(div)))
+#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (val) == 255 ? 0 : 1350000 / \
+				((val) * (div)))
 
 /******** TEMP CONVERSIONS (Bob Dougherty) *********/
-/* linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
-      if(temp<169)
-	      return double(temp)*0.427-32.08;
-      else if(temp>=169 && temp<=202)
-	      return double(temp)*0.582-58.16;
-      else
-	      return double(temp)*0.924-127.33;
-
- A fifth-order polynomial fits the unofficial data (provided by Alex van
- Kaam <darkside@chello.nl>) a bit better.  It also give more reasonable
- numbers on my machine (ie. they agree with what my BIOS tells me).
- Here's the fifth-order fit to the 8-bit data:
- temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
-	2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
-
- (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
- finding my typos in this formula!)
-
- Alas, none of the elegant function-fit solutions will work because we
- aren't allowed to use floating point in the kernel and doing it with
- integers doesn't provide enough precision.  So we'll do boring old
- look-up table stuff.  The unofficial data (see below) have effectively
- 7-bit resolution (they are rounded to the nearest degree).  I'm assuming
- that the transfer function of the device is monotonic and smooth, so a
- smooth function fit to the data will allow us to get better precision.
- I used the 5th-order poly fit described above and solved for
- VIA register values 0-255.  I *10 before rounding, so we get tenth-degree
- precision.  (I could have done all 1024 values for our 10-bit readings,
- but the function is very linear in the useful range (0-80 deg C), so
- we'll just use linear interpolation for 10-bit readings.)  So, tempLUT
- is the temp at via register values 0-255: */
-static const s16 tempLUT[] =
-{ -709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
+/*
+ * linear fits from HWMon.cpp (Copyright 1998-2000 Jonathan Teh Soon Yew)
+ *	if(temp<169)
+ *		return double(temp)*0.427-32.08;
+ *	else if(temp>=169 && temp<=202)
+ *		return double(temp)*0.582-58.16;
+ *	else
+ *		return double(temp)*0.924-127.33;
+ *
+ * A fifth-order polynomial fits the unofficial data (provided by Alex van
+ * Kaam <darkside@chello.nl>) a bit better.  It also give more reasonable
+ * numbers on my machine (ie. they agree with what my BIOS tells me).
+ * Here's the fifth-order fit to the 8-bit data:
+ * temp = 1.625093e-10*val^5 - 1.001632e-07*val^4 + 2.457653e-05*val^3 -
+ *	2.967619e-03*val^2 + 2.175144e-01*val - 7.090067e+0.
+ *
+ * (2000-10-25- RFD: thanks to Uwe Andersen <uandersen@mayah.com> for
+ * finding my typos in this formula!)
+ *
+ * Alas, none of the elegant function-fit solutions will work because we
+ * aren't allowed to use floating point in the kernel and doing it with
+ * integers doesn't provide enough precision.  So we'll do boring old
+ * look-up table stuff.  The unofficial data (see below) have effectively
+ * 7-bit resolution (they are rounded to the nearest degree).  I'm assuming
+ * that the transfer function of the device is monotonic and smooth, so a
+ * smooth function fit to the data will allow us to get better precision.
+ * I used the 5th-order poly fit described above and solved for
+ * VIA register values 0-255.  I *10 before rounding, so we get tenth-degree
+ * precision.  (I could have done all 1024 values for our 10-bit readings,
+ * but the function is very linear in the useful range (0-80 deg C), so
+ * we'll just use linear interpolation for 10-bit readings.)  So, tempLUT
+ * is the temp at via register values 0-255:
+ */
+static const s16 tempLUT[] = {
+	-709, -688, -667, -646, -627, -607, -589, -570, -553, -536, -519,
 	-503, -487, -471, -456, -442, -428, -414, -400, -387, -375,
 	-362, -350, -339, -327, -316, -305, -295, -285, -275, -265,
 	-255, -246, -237, -229, -220, -212, -204, -196, -188, -180,
@@ -225,29 +241,31 @@ static const s16 tempLUT[] =
 	1276, 1301, 1326, 1352, 1378, 1406, 1434, 1462
 };
 
-/* the original LUT values from Alex van Kaam <darkside@chello.nl>
-   (for via register values 12-240):
-{-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
--30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
--15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
--3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
-12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
-22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
-33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
-45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
-61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
-85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
-
-
- Here's the reverse LUT.  I got it by doing a 6-th order poly fit (needed
- an extra term for a good fit to these inverse data!) and then
- solving for each temp value from -50 to 110 (the useable range for
- this chip).  Here's the fit:
- viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
- - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
- Note that n=161: */
-static const u8 viaLUT[] =
-{ 12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
+/*
+ * the original LUT values from Alex van Kaam <darkside@chello.nl>
+ * (for via register values 12-240):
+ * {-50,-49,-47,-45,-43,-41,-39,-38,-37,-35,-34,-33,-32,-31,
+ * -30,-29,-28,-27,-26,-25,-24,-24,-23,-22,-21,-20,-20,-19,-18,-17,-17,-16,-15,
+ * -15,-14,-14,-13,-12,-12,-11,-11,-10,-9,-9,-8,-8,-7,-7,-6,-6,-5,-5,-4,-4,-3,
+ * -3,-2,-2,-1,-1,0,0,1,1,1,3,3,3,4,4,4,5,5,5,6,6,7,7,8,8,9,9,9,10,10,11,11,12,
+ * 12,12,13,13,13,14,14,15,15,16,16,16,17,17,18,18,19,19,20,20,21,21,21,22,22,
+ * 22,23,23,24,24,25,25,26,26,26,27,27,27,28,28,29,29,30,30,30,31,31,32,32,33,
+ * 33,34,34,35,35,35,36,36,37,37,38,38,39,39,40,40,41,41,42,42,43,43,44,44,45,
+ * 45,46,46,47,48,48,49,49,50,51,51,52,52,53,53,54,55,55,56,57,57,58,59,59,60,
+ * 61,62,62,63,64,65,66,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,83,84,
+ * 85,86,88,89,91,92,94,96,97,99,101,103,105,107,109,110};
+ *
+ *
+ * Here's the reverse LUT.  I got it by doing a 6-th order poly fit (needed
+ * an extra term for a good fit to these inverse data!) and then
+ * solving for each temp value from -50 to 110 (the useable range for
+ * this chip).  Here's the fit:
+ * viaRegVal = -1.160370e-10*val^6 +3.193693e-08*val^5 - 1.464447e-06*val^4
+ * - 2.525453e-04*val^3 + 1.424593e-02*val^2 + 2.148941e+00*val +7.275808e+01)
+ * Note that n=161:
+ */
+static const u8 viaLUT[] = {
+	12, 12, 13, 14, 14, 15, 16, 16, 17, 18, 18, 19, 20, 20, 21, 22, 23,
 	23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 35, 36, 37, 39, 40,
 	41, 43, 45, 46, 48, 49, 51, 53, 55, 57, 59, 60, 62, 64, 66,
 	69, 71, 73, 75, 77, 79, 82, 84, 86, 88, 91, 93, 95, 98, 100,
@@ -262,9 +280,11 @@ static const u8 viaLUT[] =
 	239, 240
 };
 
-/* Converting temps to (8-bit) hyst and over registers
-   No interpolation here.
-   The +50 is because the temps start at -50 */
+/*
+ * Converting temps to (8-bit) hyst and over registers
+ * No interpolation here.
+ * The +50 is because the temps start at -50
+ */
 static inline u8 TEMP_TO_REG(long val)
 {
 	return viaLUT[val <= -50000 ? 0 : val >= 110000 ? 160 :
@@ -290,10 +310,12 @@ static inline long TEMP_FROM_REG10(u16 val)
 }
 
 #define DIV_FROM_REG(val) (1 << (val))
-#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
+#define DIV_TO_REG(val) ((val) == 8 ? 3 : (val) == 4 ? 2 : (val) == 1 ? 0 : 1)
 
-/* For each registered chip, we need to keep some data in memory.
-   The structure is dynamically allocated. */
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
 struct via686a_data {
 	unsigned short addr;
 	const char *name;
@@ -365,7 +387,12 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *da,
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->in_min[nr] = IN_TO_REG(val, nr);
@@ -379,7 +406,12 @@ static ssize_t set_in_max(struct device *dev, struct device_attribute *da,
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	unsigned long val = simple_strtoul(buf, NULL, 10);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->in_max[nr] = IN_TO_REG(val, nr);
@@ -429,7 +461,12 @@ static ssize_t set_temp_over(struct device *dev, struct device_attribute *da,
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->temp_over[nr] = TEMP_TO_REG(val);
@@ -443,7 +480,12 @@ static ssize_t set_temp_hyst(struct device *dev, struct device_attribute *da,
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	int val = simple_strtol(buf, NULL, 10);
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->temp_hyst[nr] = TEMP_TO_REG(val);
@@ -471,7 +513,7 @@ static ssize_t show_fan(struct device *dev, struct device_attribute *da,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
-				DIV_FROM_REG(data->fan_div[nr])) );
+				DIV_FROM_REG(data->fan_div[nr])));
 }
 static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
 		char *buf) {
@@ -479,21 +521,27 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute *da,
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
 	return sprintf(buf, "%d\n",
-		FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])) );
+		FAN_FROM_REG(data->fan_min[nr],
+			     DIV_FROM_REG(data->fan_div[nr])));
 }
 static ssize_t show_fan_div(struct device *dev, struct device_attribute *da,
 		char *buf) {
 	struct via686a_data *data = via686a_update_device(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]) );
+	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 }
 static ssize_t set_fan_min(struct device *dev, struct device_attribute *da,
 		const char *buf, size_t count) {
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	int val = simple_strtol(buf, NULL, 10);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
@@ -506,8 +554,13 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *da,
 	struct via686a_data *data = dev_get_drvdata(dev);
 	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 	int nr = attr->index;
-	int val = simple_strtol(buf, NULL, 10);
 	int old;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
 
 	mutex_lock(&data->update_lock);
 	old = via686a_read_value(data, VIA686A_REG_FANDIV);
@@ -530,10 +583,13 @@ show_fan_offset(1);
 show_fan_offset(2);
 
 /* Alarms */
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) {
+static ssize_t show_alarms(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
 	struct via686a_data *data = via686a_update_device(dev);
 	return sprintf(buf, "%u\n", data->alarms);
 }
+
 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
 
 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
@@ -641,7 +697,8 @@ static int __devinit via686a_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	if (!(data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL))) {
+	data = kzalloc(sizeof(struct via686a_data), GFP_KERNEL);
+	if (!data) {
 		err = -ENOMEM;
 		goto exit_release;
 	}
@@ -655,7 +712,8 @@ static int __devinit via686a_probe(struct platform_device *pdev)
 	via686a_init_device(data);
 
 	/* Register sysfs hooks */
-	if ((err = sysfs_create_group(&pdev->dev.kobj, &via686a_group)))
+	err = sysfs_create_group(&pdev->dev.kobj, &via686a_group);
+	if (err)
 		goto exit_free;
 
 	data->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -748,10 +806,11 @@ static struct via686a_data *via686a_update_device(struct device *dev)
 			    via686a_read_value(data,
 					       VIA686A_REG_TEMP_HYST[i]);
 		}
-		/* add in lower 2 bits
-		   temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
-		   temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
-		   temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
+		/*
+		 * add in lower 2 bits
+		 * temp1 uses bits 7-6 of VIA686A_REG_TEMP_LOW1
+		 * temp2 uses bits 5-4 of VIA686A_REG_TEMP_LOW23
+		 * temp3 uses bits 7-6 of VIA686A_REG_TEMP_LOW23
 		 */
 		data->temp[0] |= (via686a_read_value(data,
 						     VIA686A_REG_TEMP_LOW1)
@@ -779,9 +838,8 @@ static struct via686a_data *via686a_update_device(struct device *dev)
 
 static DEFINE_PCI_DEVICE_TABLE(via686a_pci_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4) },
-	{ 0, }
+	{ }
 };
-
 MODULE_DEVICE_TABLE(pci, via686a_pci_ids);
 
 static int __devinit via686a_device_add(unsigned short address)
@@ -872,7 +930,8 @@ static int __devinit via686a_pci_probe(struct pci_dev *dev,
 	if (via686a_device_add(address))
 		goto exit_unregister;
 
-	/* Always return failure here.  This is to allow other drivers to bind
+	/*
+	 * Always return failure here.  This is to allow other drivers to bind
 	 * to this pci device.  We don't really want to have control over the
 	 * pci device, we only wanted to read as few register values from it.
 	 */