hwmon (pmbus) use simple i2c probe function

pmbus_do_probe doesn't use the id information provided in its second
argument, so this can be removed, which then allows using the
single-parameter i2c probe function ("probe_new") for probes.

This avoids scanning the identifier tables during probes.

Drivers which didn't use the id are converted as-is; drivers which did
are modified as follows:

* if the information in i2c_client is sufficient, that's used instead
  (client->name);
* configured v. probed comparisons are performed by comparing the
  configured name to the detected name, instead of the ids; this
  involves strcmp but is still cheaper than comparing all the device
  names when scanning the tables;
* anything else is handled by calling i2c_match_id() with the same
  level of error-handling (if any) as before.

Additionally, the mismatch message in the ltc2978 driver is adjusted
so that it no longer assumes that the driver_data is an index into
ltc2978_id.

Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Link: https://lore.kernel.org/r/20200808210004.30880-1-steve@sk2.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

1 files changed, 3 insertions, 4 deletions

diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
index 42e01549184a..be493182174d 100644
--- a/drivers/hwmon/pmbus/inspur-ipsps.c
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -190,11 +190,10 @@ static struct pmbus_platform_data ipsps_pdata = {
 	.flags = PMBUS_SKIP_STATUS_CHECK,
 };
 
-static int ipsps_probe(struct i2c_client *client,
-		       const struct i2c_device_id *id)
+static int ipsps_probe(struct i2c_client *client)
 {
 	client->dev.platform_data = &ipsps_pdata;
-	return pmbus_do_probe(client, id, &ipsps_info);
+	return pmbus_do_probe(client, &ipsps_info);
 }
 
 static const struct i2c_device_id ipsps_id[] = {
@@ -216,7 +215,7 @@ static struct i2c_driver ipsps_driver = {
 		.name = "inspur-ipsps",
 		.of_match_table = of_match_ptr(ipsps_of_match),
 	},
-	.probe = ipsps_probe,
+	.probe_new = ipsps_probe,
 	.remove = pmbus_do_remove,
 	.id_table = ipsps_id,
 };