hwmon: Simplify the locking model of two drivers

Many hardware monitoring drivers use two different mutexes, one to
protect their per-device data structure, and one to protect the
access to the device registers. These mutexes are essentially
redundant, as the drivers are transfering values between the device
registers and the data cache, so they almost always end up holding
both mutexes at the same time. Using a single mutex will make the
code more simple and faster.

I am changing only two of the affected drivers here, the authors
of the other affected drivers are welcome to submit similar patches
if they want.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 5 insertions, 17 deletions

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index bb16668ad2bd..18bb44d18e89 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -221,7 +221,6 @@ static const unsigned int pwm_freq[8] = {
 struct it87_data {
 	struct i2c_client client;
 	struct class_device *class_dev;
-	struct mutex lock;
 	enum chips type;
 
 	struct mutex update_lock;
@@ -548,9 +547,10 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct it87_data *data = i2c_get_clientdata(client);
 	int val = simple_strtol(buf, NULL, 10);
-	u8 reg = it87_read_value(client, IT87_REG_FAN_DIV);
+	u8 reg;
 
 	mutex_lock(&data->update_lock);
+	reg = it87_read_value(client, IT87_REG_FAN_DIV);
 	switch (nr) {
 	case 0: data->fan_div[nr] = reg & 0x07; break;
 	case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break;
@@ -949,7 +949,6 @@ static int it87_detect(struct i2c_adapter *adapter)
 	}
 
 	new_client = &data->client;
-	mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
 	new_client->addr = isa_address;
 	new_client->adapter = adapter;
@@ -1127,33 +1126,22 @@ static int it87_detach_client(struct i2c_client *client)
 	return 0;
 }
 
-/* ISA access must be locked explicitly!
+/* Must be called with data->update_lock held, except during initialization.
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
 static int it87_read_value(struct i2c_client *client, u8 reg)
 {
-	struct it87_data *data = i2c_get_clientdata(client);
-	int res;
-
-	mutex_lock(&data->lock);
 	outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
-	res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
-	mutex_unlock(&data->lock);
-
-	return res;
+	return inb_p(client->addr + IT87_DATA_REG_OFFSET);
 }
 
-/* ISA access must be locked explicitly!
+/* Must be called with data->update_lock held, except during initialization.
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
 static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
 {
-	struct it87_data *data = i2c_get_clientdata(client);
-
-	mutex_lock(&data->lock);
 	outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
 	outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
-	mutex_unlock(&data->lock);
 }
 
 /* Return 1 if and only if the PWM interface is safe to use */