Merge tag 'drm-intel-fixes-2018-04-26' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix for black screen issues (FDO #104158 and #104425)
- A correction for wrongly applied display W/A
- Fixes for HDA codec interop issue (no audio) and too eager HW timeouts

* tag 'drm-intel-fixes-2018-04-26' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915/fbdev: Enable late fbdev initial configuration
  drm/i915: Use ktime on wait_for
  drm/i915: Enable display WA#1183 from its correct spot
  drm/i915/audio: set minimum CD clock to twice the BCLK

4 files changed, 22 insertions, 11 deletions

diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index fc8b2c6e3508..32d24c69da3c 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -2140,10 +2140,22 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
 		}
 	}
 
-	/* According to BSpec, "The CD clock frequency must be at least twice
+	/*
+	 * According to BSpec, "The CD clock frequency must be at least twice
 	 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
+	 *
+	 * FIXME: Check the actual, not default, BCLK being used.
+	 *
+	 * FIXME: This does not depend on ->has_audio because the higher CDCLK
+	 * is required for audio probe, also when there are no audio capable
+	 * displays connected at probe time. This leads to unnecessarily high
+	 * CDCLK when audio is not required.
+	 *
+	 * FIXME: This limit is only applied when there are displays connected
+	 * at probe time. If we probe without displays, we'll still end up using
+	 * the platform minimum CDCLK, failing audio probe.
 	 */
-	if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
+	if (INTEL_GEN(dev_priv) >= 9)
 		min_cdclk = max(2 * 96000, min_cdclk);
 
 	/*
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index d4368589b355..a80fbad9be0f 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -49,12 +49,12 @@
  * check the condition before the timeout.
  */
 #define __wait_for(OP, COND, US, Wmin, Wmax) ({ \
-	unsigned long timeout__ = jiffies + usecs_to_jiffies(US) + 1;	\
+	const ktime_t end__ = ktime_add_ns(ktime_get_raw(), 1000ll * (US)); \
 	long wait__ = (Wmin); /* recommended min for usleep is 10 us */	\
 	int ret__;							\
 	might_sleep();							\
 	for (;;) {							\
-		bool expired__ = time_after(jiffies, timeout__);	\
+		const bool expired__ = ktime_after(ktime_get_raw(), end__); \
 		OP;							\
 		if (COND) {						\
 			ret__ = 0;					\
diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index 6f12adc06365..6467a5cc2ca3 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -806,7 +806,7 @@ void intel_fbdev_output_poll_changed(struct drm_device *dev)
 		return;
 
 	intel_fbdev_sync(ifbdev);
-	if (ifbdev->vma)
+	if (ifbdev->vma || ifbdev->helper.deferred_setup)
 		drm_fb_helper_hotplug_event(&ifbdev->helper);
 }
 
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index 53ea564f971e..66de4b2dc8b7 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -641,19 +641,18 @@ void skl_enable_dc6(struct drm_i915_private *dev_priv)
 
 	DRM_DEBUG_KMS("Enabling DC6\n");
 
-	gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
+	/* Wa Display #1183: skl,kbl,cfl */
+	if (IS_GEN9_BC(dev_priv))
+		I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
+			   SKL_SELECT_ALTERNATE_DC_EXIT);
 
+	gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
 }
 
 void skl_disable_dc6(struct drm_i915_private *dev_priv)
 {
 	DRM_DEBUG_KMS("Disabling DC6\n");
 
-	/* Wa Display #1183: skl,kbl,cfl */
-	if (IS_GEN9_BC(dev_priv))
-		I915_WRITE(GEN8_CHICKEN_DCPR_1, I915_READ(GEN8_CHICKEN_DCPR_1) |
-			   SKL_SELECT_ALTERNATE_DC_EXIT);
-
 	gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
 }