diff options
| author | Shobhit Kumar <shobhit.kumar@intel.com> | 2015-02-05 17:08:45 +0530 |
|---|---|---|
| committer | Jani Nikula <jani.nikula@intel.com> | 2015-02-09 20:21:08 +0200 |
| commit | 4ba7d93afee0a2ddef7598f460927d39f33fe98b (patch) | |
| tree | 06063a0ddbbf58551f5fe18c7b68332ba68ee1e5 /drivers/gpu | |
| parent | f0a1fb10e5f79f5aaf8d7e94b9fa6bf2fa9aeebf (diff) | |
| download | linux-4ba7d93afee0a2ddef7598f460927d39f33fe98b.tar.bz2 | |
drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
LP_OUTPUT_HOLD is only in MIPI_PORT_CTRL(PORT_A) even for PORT_C in case
of dual link. In the dual link implementation, the bit is correctly set
or unset for hardcoded PORT_A, but for bit update the register base value
is read by using MIPI_PORT_CTRL(port) in a loop. The second iteration will
read base value from PORT_C and program for PORT_A. Mostly in case of dual
link all other bit values should be same, but logically we should read from
PORT_A. So hardcode to read initial value from PORT_A as well.
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dsi.c | 5 |
1 files changed, 2 insertions, 3 deletions
diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index ef3df5e3d819..10ab68457ca8 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -360,12 +360,11 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder) I915_WRITE(MIPI_DEVICE_READY(port), ULPS_STATE_ENTER); usleep_range(2500, 3000); - val = I915_READ(MIPI_PORT_CTRL(port)); - /* Enable MIPI PHY transparent latch * Common bit for both MIPI Port A & MIPI Port C * No similar bit in MIPI Port C reg */ + val = I915_READ(MIPI_PORT_CTRL(PORT_A)); I915_WRITE(MIPI_PORT_CTRL(PORT_A), val | LP_OUTPUT_HOLD); usleep_range(1000, 1500); @@ -543,10 +542,10 @@ static void intel_dsi_clear_device_ready(struct intel_encoder *encoder) == 0x00000), 30)) DRM_ERROR("DSI LP not going Low\n"); - val = I915_READ(MIPI_PORT_CTRL(port)); /* Disable MIPI PHY transparent latch * Common bit for both MIPI Port A & MIPI Port C */ + val = I915_READ(MIPI_PORT_CTRL(PORT_A)); I915_WRITE(MIPI_PORT_CTRL(PORT_A), val & ~LP_OUTPUT_HOLD); usleep_range(1000, 1500); |