gpu: host1x: mipi: Power down regulators when unused

Keep track of the number of users of DSI and CSI pads and power down the
regulators that supply the bricks when all users are gone.

Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 98 insertions, 12 deletions

diff --git a/drivers/gpu/host1x/mipi.c b/drivers/gpu/host1x/mipi.c
index 0989b8151b4c..52a6fd224127 100644
--- a/drivers/gpu/host1x/mipi.c
+++ b/drivers/gpu/host1x/mipi.c
@@ -118,9 +118,12 @@ struct tegra_mipi_soc {
 
 struct tegra_mipi {
 	const struct tegra_mipi_soc *soc;
+	struct device *dev;
 	void __iomem *regs;
 	struct mutex lock;
 	struct clk *clk;
+
+	unsigned long usage_count;
 };
 
 struct tegra_mipi_device {
@@ -142,6 +145,67 @@ static inline void tegra_mipi_writel(struct tegra_mipi *mipi, u32 value,
 	writel(value, mipi->regs + (offset << 2));
 }
 
+static int tegra_mipi_power_up(struct tegra_mipi *mipi)
+{
+	u32 value;
+	int err;
+
+	err = clk_enable(mipi->clk);
+	if (err < 0)
+		return err;
+
+	value = tegra_mipi_readl(mipi, MIPI_CAL_BIAS_PAD_CFG0);
+	value &= ~MIPI_CAL_BIAS_PAD_PDVCLAMP;
+
+	if (mipi->soc->needs_vclamp_ref)
+		value |= MIPI_CAL_BIAS_PAD_E_VCLAMP_REF;
+
+	tegra_mipi_writel(mipi, value, MIPI_CAL_BIAS_PAD_CFG0);
+
+	value = tegra_mipi_readl(mipi, MIPI_CAL_BIAS_PAD_CFG2);
+	value &= ~MIPI_CAL_BIAS_PAD_PDVREG;
+	tegra_mipi_writel(mipi, value, MIPI_CAL_BIAS_PAD_CFG2);
+
+	clk_disable(mipi->clk);
+
+	return 0;
+}
+
+static int tegra_mipi_power_down(struct tegra_mipi *mipi)
+{
+	u32 value;
+	int err;
+
+	err = clk_enable(mipi->clk);
+	if (err < 0)
+		return err;
+
+	/*
+	 * The MIPI_CAL_BIAS_PAD_PDVREG controls a voltage regulator that
+	 * supplies the DSI pads. This must be kept enabled until none of the
+	 * DSI lanes are used anymore.
+	 */
+	value = tegra_mipi_readl(mipi, MIPI_CAL_BIAS_PAD_CFG2);
+	value |= MIPI_CAL_BIAS_PAD_PDVREG;
+	tegra_mipi_writel(mipi, value, MIPI_CAL_BIAS_PAD_CFG2);
+
+	/*
+	 * MIPI_CAL_BIAS_PAD_PDVCLAMP and MIPI_CAL_BIAS_PAD_E_VCLAMP_REF
+	 * control a regulator that supplies current to the pre-driver logic.
+	 * Powering down this regulator causes DSI to fail, so it must remain
+	 * powered on until none of the DSI lanes are used anymore.
+	 */
+	value = tegra_mipi_readl(mipi, MIPI_CAL_BIAS_PAD_CFG0);
+
+	if (mipi->soc->needs_vclamp_ref)
+		value &= ~MIPI_CAL_BIAS_PAD_E_VCLAMP_REF;
+
+	value |= MIPI_CAL_BIAS_PAD_PDVCLAMP;
+	tegra_mipi_writel(mipi, value, MIPI_CAL_BIAS_PAD_CFG0);
+
+	return 0;
+}
+
 struct tegra_mipi_device *tegra_mipi_request(struct device *device)
 {
 	struct device_node *np = device->of_node;
@@ -178,6 +242,20 @@ struct tegra_mipi_device *tegra_mipi_request(struct device *device)
 	dev->pads = args.args[0];
 	dev->device = device;
 
+	mutex_lock(&dev->mipi->lock);
+
+	if (dev->mipi->usage_count++ == 0) {
+		err = tegra_mipi_power_up(dev->mipi);
+		if (err < 0) {
+			dev_err(dev->mipi->dev,
+				"failed to power up MIPI bricks: %d\n",
+				err);
+			return ERR_PTR(err);
+		}
+	}
+
+	mutex_unlock(&dev->mipi->lock);
+
 	return dev;
 
 put:
@@ -192,6 +270,25 @@ EXPORT_SYMBOL(tegra_mipi_request);
 
 void tegra_mipi_free(struct tegra_mipi_device *device)
 {
+	int err;
+
+	mutex_lock(&device->mipi->lock);
+
+	if (--device->mipi->usage_count == 0) {
+		err = tegra_mipi_power_down(device->mipi);
+		if (err < 0) {
+			/*
+			 * Not much that can be done here, so an error message
+			 * will have to do.
+			 */
+			dev_err(device->mipi->dev,
+				"failed to power down MIPI bricks: %d\n",
+				err);
+		}
+	}
+
+	mutex_unlock(&device->mipi->lock);
+
 	platform_device_put(device->pdev);
 	kfree(device);
 }
@@ -227,23 +324,11 @@ int tegra_mipi_calibrate(struct tegra_mipi_device *device)
 
 	mutex_lock(&device->mipi->lock);
 
-	value = tegra_mipi_readl(device->mipi, MIPI_CAL_BIAS_PAD_CFG0);
-	value &= ~MIPI_CAL_BIAS_PAD_PDVCLAMP;
-
-	if (soc->needs_vclamp_ref)
-		value |= MIPI_CAL_BIAS_PAD_E_VCLAMP_REF;
-
-	tegra_mipi_writel(device->mipi, value, MIPI_CAL_BIAS_PAD_CFG0);
-
 	value = MIPI_CAL_BIAS_PAD_DRV_DN_REF(soc->pad_drive_down_ref) |
 		MIPI_CAL_BIAS_PAD_DRV_UP_REF(soc->pad_drive_up_ref);
 	tegra_mipi_writel(device->mipi, value, MIPI_CAL_BIAS_PAD_CFG1);
 
 	value = tegra_mipi_readl(device->mipi, MIPI_CAL_BIAS_PAD_CFG2);
-	value &= ~MIPI_CAL_BIAS_PAD_PDVREG;
-	tegra_mipi_writel(device->mipi, value, MIPI_CAL_BIAS_PAD_CFG2);
-
-	value = tegra_mipi_readl(device->mipi, MIPI_CAL_BIAS_PAD_CFG2);
 	value &= ~MIPI_CAL_BIAS_PAD_VCLAMP(0x7);
 	value &= ~MIPI_CAL_BIAS_PAD_VAUXP(0x7);
 	value |= MIPI_CAL_BIAS_PAD_VCLAMP(soc->pad_vclamp_level);
@@ -426,6 +511,7 @@ static int tegra_mipi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	mipi->soc = match->data;
+	mipi->dev = &pdev->dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	mipi->regs = devm_ioremap_resource(&pdev->dev, res);