diff options
| author | Jani Nikula <jani.nikula@intel.com> | 2022-05-20 12:46:00 +0300 |
|---|---|---|
| committer | Jani Nikula <jani.nikula@intel.com> | 2022-05-23 12:08:58 +0300 |
| commit | 0ea917819d12fed41ea4662cc26ffa0060a5c354 (patch) | |
| tree | 874c5ef30d52ade040d255dda5853df2237b3c5f /drivers/gpu/drm | |
| parent | 069617295650ec2ba27a8f22da10056d3e1160b3 (diff) | |
| download | linux-0ea917819d12fed41ea4662cc26ffa0060a5c354.tar.bz2 | |
drm/i915/dsi: fix VBT send packet port selection for ICL+
The VBT send packet port selection was never updated for ICL+ where the
2nd link is on port B instead of port C as in VLV+ DSI.
First, single link DSI needs to use the configured port instead of
relying on the VBT sequence block port. Remove the hard-coded port C
check here and make it generic. For reference, see commit f915084edc5a
("drm/i915: Changes related to the sequence port no for") for the
original VLV specific fix.
Second, the sequence block port number is either 0 or 1, where 1
indicates the 2nd link. Remove the hard-coded port C here for 2nd
link. (This could be a "find second set bit" on DSI ports, but just
check the two possible options.)
Third, sanity check the result with a warning to avoid a NULL pointer
dereference.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5984
Cc: stable@vger.kernel.org # v4.19+
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220520094600.2066945-1-jani.nikula@intel.com
(cherry picked from commit 08c59dde71b73a0ac94e3ed2d431345b01f20485)
Diffstat (limited to 'drivers/gpu/drm')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 33 |
1 files changed, 22 insertions, 11 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c index f370e9c4350d..dd24aef925f2 100644 --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c @@ -125,9 +125,25 @@ struct i2c_adapter_lookup { #define ICL_GPIO_DDPA_CTRLCLK_2 8 #define ICL_GPIO_DDPA_CTRLDATA_2 9 -static enum port intel_dsi_seq_port_to_port(u8 port) +static enum port intel_dsi_seq_port_to_port(struct intel_dsi *intel_dsi, + u8 seq_port) { - return port ? PORT_C : PORT_A; + /* + * If single link DSI is being used on any port, the VBT sequence block + * send packet apparently always has 0 for the port. Just use the port + * we have configured, and ignore the sequence block port. + */ + if (hweight8(intel_dsi->ports) == 1) + return ffs(intel_dsi->ports) - 1; + + if (seq_port) { + if (intel_dsi->ports & PORT_B) + return PORT_B; + else if (intel_dsi->ports & PORT_C) + return PORT_C; + } + + return PORT_A; } static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, @@ -149,15 +165,10 @@ static const u8 *mipi_exec_send_packet(struct intel_dsi *intel_dsi, seq_port = (flags >> MIPI_PORT_SHIFT) & 3; - /* For DSI single link on Port A & C, the seq_port value which is - * parsed from Sequence Block#53 of VBT has been set to 0 - * Now, read/write of packets for the DSI single link on Port A and - * Port C will based on the DVO port from VBT block 2. - */ - if (intel_dsi->ports == (1 << PORT_C)) - port = PORT_C; - else - port = intel_dsi_seq_port_to_port(seq_port); + port = intel_dsi_seq_port_to_port(intel_dsi, seq_port); + + if (drm_WARN_ON(&dev_priv->drm, !intel_dsi->dsi_hosts[port])) + goto out; dsi_device = intel_dsi->dsi_hosts[port]->device; if (!dsi_device) { |