Merge tag 'drm-misc-fixes-2019-01-10' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Pull request for drm-misc-fixes for v5.0-rc2:
- Fixes for the tc358767 bridge to work correctly with
  tc358867 using a DP connector.
- Make resume work on amdgpu when a DP-MST display is unplugged.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1c47722d-c416-184d-4340-0dc6a614d685@linux.intel.com

2 files changed, 63 insertions, 22 deletions

diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index a9a28dbc3e24..34f35e9a3c46 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -699,22 +699,36 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
 {
 	struct amdgpu_dm_connector *aconnector;
 	struct drm_connector *connector;
+	struct drm_dp_mst_topology_mgr *mgr;
+	int ret;
+	bool need_hotplug = false;
 
 	drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
 
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		   aconnector = to_amdgpu_dm_connector(connector);
-		   if (aconnector->dc_link->type == dc_connection_mst_branch &&
-				   !aconnector->mst_port) {
+	list_for_each_entry(connector, &dev->mode_config.connector_list,
+			    head) {
+		aconnector = to_amdgpu_dm_connector(connector);
+		if (aconnector->dc_link->type != dc_connection_mst_branch ||
+		    aconnector->mst_port)
+			continue;
 
-			   if (suspend)
-				   drm_dp_mst_topology_mgr_suspend(&aconnector->mst_mgr);
-			   else
-				   drm_dp_mst_topology_mgr_resume(&aconnector->mst_mgr);
-		   }
+		mgr = &aconnector->mst_mgr;
+
+		if (suspend) {
+			drm_dp_mst_topology_mgr_suspend(mgr);
+		} else {
+			ret = drm_dp_mst_topology_mgr_resume(mgr);
+			if (ret < 0) {
+				drm_dp_mst_topology_mgr_set_mst(mgr, false);
+				need_hotplug = true;
+			}
+		}
 	}
 
 	drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+	if (need_hotplug)
+		drm_kms_helper_hotplug_event(dev);
 }
 
 /**
@@ -898,7 +912,6 @@ static int dm_resume(void *handle)
 	struct drm_plane_state *new_plane_state;
 	struct dm_plane_state *dm_new_plane_state;
 	enum dc_connection_type new_connection_type = dc_connection_none;
-	int ret;
 	int i;
 
 	/* power on hardware */
@@ -971,13 +984,13 @@ static int dm_resume(void *handle)
 		}
 	}
 
-	ret = drm_atomic_helper_resume(ddev, dm->cached_state);
+	drm_atomic_helper_resume(ddev, dm->cached_state);
 
 	dm->cached_state = NULL;
 
 	amdgpu_dm_irq_resume_late(adev);
 
-	return ret;
+	return 0;
 }
 
 /**
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8e28e738cb52..e6403b9549f1 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -98,6 +98,8 @@
 #define DP0_STARTVAL		0x064c
 #define DP0_ACTIVEVAL		0x0650
 #define DP0_SYNCVAL		0x0654
+#define SYNCVAL_HS_POL_ACTIVE_LOW	(1 << 15)
+#define SYNCVAL_VS_POL_ACTIVE_LOW	(1 << 31)
 #define DP0_MISC		0x0658
 #define TU_SIZE_RECOMMENDED		(63) /* LSCLK cycles per TU */
 #define BPC_6				(0 << 5)
@@ -142,6 +144,8 @@
 #define DP0_LTLOOPCTRL		0x06d8
 #define DP0_SNKLTCTRL		0x06e4
 
+#define DP1_SRCCTRL		0x07a0
+
 /* PHY */
 #define DP_PHY_CTRL		0x0800
 #define DP_PHY_RST			BIT(28)  /* DP PHY Global Soft Reset */
@@ -150,6 +154,7 @@
 #define PHY_M1_RST			BIT(12)  /* Reset PHY1 Main Channel */
 #define PHY_RDY				BIT(16)  /* PHY Main Channels Ready */
 #define PHY_M0_RST			BIT(8)   /* Reset PHY0 Main Channel */
+#define PHY_2LANE			BIT(2)   /* PHY Enable 2 lanes */
 #define PHY_A0_EN			BIT(1)   /* PHY Aux Channel0 Enable */
 #define PHY_M0_EN			BIT(0)   /* PHY Main Channel0 Enable */
 
@@ -540,6 +545,7 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	unsigned long rate;
 	u32 value;
 	int ret;
+	u32 dp_phy_ctrl;
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -564,7 +570,10 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
 
-	tc_write(DP_PHY_CTRL, BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN);
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
+	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 
 	/*
 	 * Initially PLLs are in bypass. Force PLL parameter update,
@@ -719,7 +728,9 @@ static int tc_set_video_mode(struct tc_data *tc, struct drm_display_mode *mode)
 
 	tc_write(DP0_ACTIVEVAL, (mode->vdisplay << 16) | (mode->hdisplay));
 
-	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0));
+	tc_write(DP0_SYNCVAL, (vsync_len << 16) | (hsync_len << 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NHSYNC) ? SYNCVAL_HS_POL_ACTIVE_LOW : 0) |
+		 ((mode->flags & DRM_MODE_FLAG_NVSYNC) ? SYNCVAL_VS_POL_ACTIVE_LOW : 0));
 
 	tc_write(DPIPXLFMT, VS_POL_ACTIVE_LOW | HS_POL_ACTIVE_LOW |
 		 DE_POL_ACTIVE_HIGH | SUB_CFG_TYPE_CONFIG1 | DPI_BPP_RGB888);
@@ -829,12 +840,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	if (!tc->mode)
 		return -EINVAL;
 
-	/* from excel file - DP0_SrcCtrl */
-	tc_write(DP0_SRCCTRL, DP0_SRCCTRL_SCRMBLDIS | DP0_SRCCTRL_EN810B |
-		 DP0_SRCCTRL_LANESKEW | DP0_SRCCTRL_LANES_2 |
-		 DP0_SRCCTRL_BW27 | DP0_SRCCTRL_AUTOCORRECT);
-	/* from excel file - DP1_SrcCtrl */
-	tc_write(0x07a0, 0x00003083);
+	tc_write(DP0_SRCCTRL, tc_srcctrl(tc));
+	/* SSCG and BW27 on DP1 must be set to the same as on DP0 */
+	tc_write(DP1_SRCCTRL,
+		 (tc->link.spread ? DP0_SRCCTRL_SSCG : 0) |
+		 ((tc->link.base.rate != 162000) ? DP0_SRCCTRL_BW27 : 0));
 
 	rate = clk_get_rate(tc->refclk);
 	switch (rate) {
@@ -855,8 +865,11 @@ static int tc_main_link_setup(struct tc_data *tc)
 	}
 	value |= SYSCLK_SEL_LSCLK | LSCLK_DIV_2;
 	tc_write(SYS_PLLPARAM, value);
+
 	/* Setup Main Link */
-	dp_phy_ctrl = BGREN | PWR_SW_EN | BIT(2) | PHY_A0_EN |  PHY_M0_EN;
+	dp_phy_ctrl = BGREN | PWR_SW_EN | PHY_A0_EN | PHY_M0_EN;
+	if (tc->link.base.num_lanes == 2)
+		dp_phy_ctrl |= PHY_2LANE;
 	tc_write(DP_PHY_CTRL, dp_phy_ctrl);
 	msleep(100);
 
@@ -1105,10 +1118,20 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
 static enum drm_mode_status tc_connector_mode_valid(struct drm_connector *connector,
 				   struct drm_display_mode *mode)
 {
+	struct tc_data *tc = connector_to_tc(connector);
+	u32 req, avail;
+	u32 bits_per_pixel = 24;
+
 	/* DPI interface clock limitation: upto 154 MHz */
 	if (mode->clock > 154000)
 		return MODE_CLOCK_HIGH;
 
+	req = mode->clock * bits_per_pixel / 8;
+	avail = tc->link.base.num_lanes * tc->link.base.rate;
+
+	if (req > avail)
+		return MODE_BAD;
+
 	return MODE_OK;
 }
 
@@ -1186,7 +1209,8 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 	/* Create eDP connector */
 	drm_connector_helper_add(&tc->connector, &tc_connector_helper_funcs);
 	ret = drm_connector_init(drm, &tc->connector, &tc_connector_funcs,
-				 DRM_MODE_CONNECTOR_eDP);
+				 tc->panel ? DRM_MODE_CONNECTOR_eDP :
+				 DRM_MODE_CONNECTOR_DisplayPort);
 	if (ret)
 		return ret;
 
@@ -1195,6 +1219,10 @@ static int tc_bridge_attach(struct drm_bridge *bridge)
 
 	drm_display_info_set_bus_formats(&tc->connector.display_info,
 					 &bus_format, 1);
+	tc->connector.display_info.bus_flags =
+		DRM_BUS_FLAG_DE_HIGH |
+		DRM_BUS_FLAG_PIXDATA_NEGEDGE |
+		DRM_BUS_FLAG_SYNC_NEGEDGE;
 	drm_connector_attach_encoder(&tc->connector, tc->bridge.encoder);
 
 	return 0;