diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2017-12-22 00:44:11 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2017-12-22 09:05:45 +0100 |
commit | 0ee2e37a1fbaf5e9248227a266f3920042d078df (patch) | |
tree | b10d2adeab484fc90150518fa37de2906738d691 /drivers/gpu/drm | |
parent | c49e800f89296f09eb4130b5d65ce7b7c5d57d46 (diff) | |
download | linux-0ee2e37a1fbaf5e9248227a266f3920042d078df.tar.bz2 |
drm/panel: Add Ilitek ILI9322 driver
This adds support for the Ilitek ILI9322 QVGA (320x240)
TFT panel driver.
This panel driver supports serial or parallel RGB or
YUV input and also ITU-T BT.656 input streams.
The controller is combined with a physical panel and
configured through the device tree.
Cc: David Lechner <david@lechnology.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171221234411.12156-1-linus.walleij@linaro.org
Diffstat (limited to 'drivers/gpu/drm')
-rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 8 | ||||
-rw-r--r-- | drivers/gpu/drm/panel/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 962 |
3 files changed, 971 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 726f3fb3312d..6ba4031f3919 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -28,6 +28,14 @@ config DRM_PANEL_SIMPLE that it can be automatically turned off when the panel goes into a low power state. +config DRM_PANEL_ILITEK_IL9322 + tristate "Ilitek ILI9322 320x240 QVGA panels" + depends on OF && SPI + select REGMAP + help + Say Y here if you want to enable support for Ilitek IL9322 + QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. + config DRM_PANEL_INNOLUX_P079ZCA tristate "Innolux P079ZCA panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 2c4e1a93e05f..6d251ebc568c 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o +obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c new file mode 100644 index 000000000000..b4ec0ecff807 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c @@ -0,0 +1,962 @@ +/* + * Ilitek ILI9322 TFT LCD drm_panel driver. + * + * This panel can be configured to support: + * - 8-bit serial RGB interface + * - 24-bit parallel RGB interface + * - 8-bit ITU-R BT.601 interface + * - 8-bit ITU-R BT.656 interface + * - Up to 320RGBx240 dots resolution TFT LCD displays + * - Scaling, brightness and contrast + * + * The scaling means that the display accepts a 640x480 or 720x480 + * input and rescales it to fit to the 320x240 display. So what we + * present to the system is something else than what comes out on the + * actual display. + * + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * Derived from drivers/drm/gpu/panel/panel-samsung-ld9040.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <drm/drmP.h> +#include <drm/drm_panel.h> + +#include <linux/of_device.h> +#include <linux/bitops.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/spi/spi.h> + +#include <video/mipi_display.h> +#include <video/of_videomode.h> +#include <video/videomode.h> + +#define ILI9322_CHIP_ID 0x00 +#define ILI9322_CHIP_ID_MAGIC 0x96 + +/* + * Voltage on the communication interface, from 0.7 (0x00) + * to 1.32 (0x1f) times the VREG1OUT voltage in 2% increments. + * 1.00 (0x0f) is the default. + */ +#define ILI9322_VCOM_AMP 0x01 + +/* + * High voltage on the communication signals, from 0.37 (0x00) to + * 1.0 (0x3f) times the VREGOUT1 voltage in 1% increments. + * 0.83 (0x2e) is the default. + */ +#define ILI9322_VCOM_HIGH 0x02 + +/* + * VREG1 voltage regulator from 3.6V (0x00) to 6.0V (0x18) in 0.1V + * increments. 5.4V (0x12) is the default. This is the reference + * voltage for the VCOM levels and the greyscale level. + */ +#define ILI9322_VREG1_VOLTAGE 0x03 + +/* Describes the incoming signal */ +#define ILI9322_ENTRY 0x06 +/* 0 = right-to-left, 1 = left-to-right (default), horizontal flip */ +#define ILI9322_ENTRY_HDIR BIT(0) +/* 0 = down-to-up, 1 = up-to-down (default), vertical flip */ +#define ILI9322_ENTRY_VDIR BIT(1) +/* NTSC, PAL or autodetect */ +#define ILI9322_ENTRY_NTSC (0 << 2) +#define ILI9322_ENTRY_PAL (1 << 2) +#define ILI9322_ENTRY_AUTODETECT (3 << 2) +/* Input format */ +#define ILI9322_ENTRY_SERIAL_RGB_THROUGH (0 << 4) +#define ILI9322_ENTRY_SERIAL_RGB_ALIGNED (1 << 4) +#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_320X240 (2 << 4) +#define ILI9322_ENTRY_SERIAL_RGB_DUMMY_360X240 (3 << 4) +#define ILI9322_ENTRY_DISABLE_1 (4 << 4) +#define ILI9322_ENTRY_PARALLEL_RGB_THROUGH (5 << 4) +#define ILI9322_ENTRY_PARALLEL_RGB_ALIGNED (6 << 4) +#define ILI9322_ENTRY_YUV_640Y_320CBCR_25_54_MHZ (7 << 4) +#define ILI9322_ENTRY_YUV_720Y_360CBCR_27_MHZ (8 << 4) +#define ILI9322_ENTRY_DISABLE_2 (9 << 4) +#define ILI9322_ENTRY_ITU_R_BT_656_720X360 (10 << 4) +#define ILI9322_ENTRY_ITU_R_BT_656_640X320 (11 << 4) + +/* Power control */ +#define ILI9322_POW_CTRL 0x07 +#define ILI9322_POW_CTRL_STB BIT(0) /* 0 = standby, 1 = normal */ +#define ILI9322_POW_CTRL_VGL BIT(1) /* 0 = off, 1 = on */ +#define ILI9322_POW_CTRL_VGH BIT(2) /* 0 = off, 1 = on */ +#define ILI9322_POW_CTRL_DDVDH BIT(3) /* 0 = off, 1 = on */ +#define ILI9322_POW_CTRL_VCOM BIT(4) /* 0 = off, 1 = on */ +#define ILI9322_POW_CTRL_VCL BIT(5) /* 0 = off, 1 = on */ +#define ILI9322_POW_CTRL_AUTO BIT(6) /* 0 = interactive, 1 = auto */ +#define ILI9322_POW_CTRL_STANDBY (ILI9322_POW_CTRL_VGL | \ + ILI9322_POW_CTRL_VGH | \ + ILI9322_POW_CTRL_DDVDH | \ + ILI9322_POW_CTRL_VCL | \ + ILI9322_POW_CTRL_AUTO | \ + BIT(7)) +#define ILI9322_POW_CTRL_DEFAULT (ILI9322_POW_CTRL_STANDBY | \ + ILI9322_POW_CTRL_STB) + +/* Vertical back porch bits 0..5 */ +#define ILI9322_VBP 0x08 + +/* Horizontal back porch, 8 bits */ +#define ILI9322_HBP 0x09 + +/* + * Polarity settings: + * 1 = positive polarity + * 0 = negative polarity + */ +#define ILI9322_POL 0x0a +#define ILI9322_POL_DCLK BIT(0) /* 1 default */ +#define ILI9322_POL_HSYNC BIT(1) /* 0 default */ +#define ILI9322_POL_VSYNC BIT(2) /* 0 default */ +#define ILI9322_POL_DE BIT(3) /* 1 default */ +/* + * 0 means YCBCR are ordered Cb0,Y0,Cr0,Y1,Cb2,Y2,Cr2,Y3 (default) + * in RGB mode this means RGB comes in RGBRGB + * 1 means YCBCR are ordered Cr0,Y0,Cb0,Y1,Cr2,Y2,Cb2,Y3 + * in RGB mode this means RGB comes in BGRBGR + */ +#define ILI9322_POL_YCBCR_MODE BIT(4) +/* Formula A for YCbCR->RGB = 0, Formula B = 1 */ +#define ILI9322_POL_FORMULA BIT(5) +/* Reverse polarity: 0 = 0..255, 1 = 255..0 */ +#define ILI9322_POL_REV BIT(6) + +#define ILI9322_IF_CTRL 0x0b +#define ILI9322_IF_CTRL_HSYNC_VSYNC 0x00 +#define ILI9322_IF_CTRL_HSYNC_VSYNC_DE BIT(2) +#define ILI9322_IF_CTRL_DE_ONLY BIT(3) +#define ILI9322_IF_CTRL_SYNC_DISABLED (BIT(2) | BIT(3)) +#define ILI9322_IF_CTRL_LINE_INVERSION BIT(0) /* Not set means frame inv */ + +#define ILI9322_GLOBAL_RESET 0x04 +#define ILI9322_GLOBAL_RESET_ASSERT 0x00 /* bit 0 = 0 -> reset */ + +/* + * 4+4 bits of negative and positive gamma correction + * Upper nybble, bits 4-7 are negative gamma + * Lower nybble, bits 0-3 are positive gamma + */ +#define ILI9322_GAMMA_1 0x10 +#define ILI9322_GAMMA_2 0x11 +#define ILI9322_GAMMA_3 0x12 +#define ILI9322_GAMMA_4 0x13 +#define ILI9322_GAMMA_5 0x14 +#define ILI9322_GAMMA_6 0x15 +#define ILI9322_GAMMA_7 0x16 +#define ILI9322_GAMMA_8 0x17 + +/** + * enum ili9322_input - the format of the incoming signal to the panel + * + * The panel can be connected to various input streams and four of them can + * be selected by electronic straps on the display. However it is possible + * to select another mode or override the electronic default with this + * setting. + */ +enum ili9322_input { + ILI9322_INPUT_SRGB_THROUGH = 0x0, + ILI9322_INPUT_SRGB_ALIGNED = 0x1, + ILI9322_INPUT_SRGB_DUMMY_320X240 = 0x2, + ILI9322_INPUT_SRGB_DUMMY_360X240 = 0x3, + ILI9322_INPUT_DISABLED_1 = 0x4, + ILI9322_INPUT_PRGB_THROUGH = 0x5, + ILI9322_INPUT_PRGB_ALIGNED = 0x6, + ILI9322_INPUT_YUV_640X320_YCBCR = 0x7, + ILI9322_INPUT_YUV_720X360_YCBCR = 0x8, + ILI9322_INPUT_DISABLED_2 = 0x9, + ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR = 0xa, + ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR = 0xb, + ILI9322_INPUT_UNKNOWN = 0xc, +}; + +const char *ili9322_inputs[] = { + "8 bit serial RGB through", + "8 bit serial RGB aligned", + "8 bit serial RGB dummy 320x240", + "8 bit serial RGB dummy 360x240", + "disabled 1", + "24 bit parallel RGB through", + "24 bit parallel RGB aligned", + "24 bit YUV 640Y 320CbCr", + "24 bit YUV 720Y 360CbCr", + "disabled 2", + "8 bit ITU-R BT.656 720Y 360CbCr", + "8 bit ITU-R BT.656 640Y 320CbCr", +}; + +/** + * struct ili9322_config - the system specific ILI9322 configuration + * @width_mm: physical panel width [mm] + * @height_mm: physical panel height [mm] + * @flip_horizontal: flip the image horizontally (right-to-left scan) + * (only in RGB and YUV modes) + * @flip_vertical: flip the image vertically (down-to-up scan) + * (only in RGB and YUV modes) + * @input: the input/entry type used in this system, if this is set to + * ILI9322_INPUT_UNKNOWN the driver will try to figure it out by probing + * the hardware + * @vreg1out_mv: the output in microvolts for the VREGOUT1 regulator used + * to drive the physical display. Valid ranges are 3600 thru 6000 in 100 + * microvolt increments. If not specified, hardware defaults will be + * used (4.5V). + * @vcom_high_percent: the percentage of VREGOUT1 used for the peak + * voltage on the communications link. Valid ranges are 37 thru 100 + * percent. If not specified, hardware defaults will be used (91%). + * @vcom_amplitude_percent: the percentage of VREGOUT1 used for the + * peak-to-peak amplitude of the communcation signals to the physical + * display. Valid ranges are 70 thru 132 percent in increments if two + * percent. Odd percentages will be truncated. If not specified, hardware + * defaults will be used (114%). + * @dclk_active_high: data/pixel clock active high, data will be clocked + * in on the rising edge of the DCLK (this is usually the case). + * @syncmode: The synchronization mode, what sync signals are emitted. + * See the enum for details. + * @de_active_high: DE (data entry) is active high + * @hsync_active_high: HSYNC is active high + * @vsync_active_high: VSYNC is active high + * @gamma_corr_pos: a set of 8 nybbles describing positive + * gamma correction for voltages V1 thru V8. Valid range 0..15 + * @gamma_corr_neg: a set of 8 nybbles describing negative + * gamma correction for voltages V1 thru V8. Valid range 0..15 + * + * These adjust what grayscale voltage will be output for input data V1 = 0, + * V2 = 16, V3 = 48, V4 = 96, V5 = 160, V6 = 208, V7 = 240 and V8 = 255. + * The curve is shaped like this: + * + * ^ + * | V8 + * | V7 + * | V6 + * | V5 + * | V4 + * | V3 + * | V2 + * | V1 + * +-----------------------------------------------------------> + * 0 16 48 96 160 208 240 255 + * + * The negative and postive gamma values adjust the V1 thru V8 up/down + * according to the datasheet specifications. This is a property of the + * physical display connected to the display controller and may vary. + * If defined, both arrays must be supplied in full. If the properties + * are not supplied, hardware defaults will be used. + */ +struct ili9322_config { + u32 width_mm; + u32 height_mm; + bool flip_horizontal; + bool flip_vertical; + enum ili9322_input input; + u32 vreg1out_mv; + u32 vcom_high_percent; + u32 vcom_amplitude_percent; + bool dclk_active_high; + bool de_active_high; + bool hsync_active_high; + bool vsync_active_high; + u8 syncmode; + u8 gamma_corr_pos[8]; + u8 gamma_corr_neg[8]; +}; + +struct ili9322 { + struct device *dev; + const struct ili9322_config *conf; + struct drm_panel panel; + struct regmap *regmap; + struct regulator_bulk_data supplies[3]; + struct gpio_desc *reset_gpio; + enum ili9322_input input; + struct videomode vm; + u8 gamma[8]; + u8 vreg1out; + u8 vcom_high; + u8 vcom_amplitude; +}; + +static inline struct ili9322 *panel_to_ili9322(struct drm_panel *panel) +{ + return container_of(panel, struct ili9322, panel); +} + +static int ili9322_regmap_spi_write(void *context, const void *data, + size_t count) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 buf[2]; + + /* Clear bit 7 to write */ + memcpy(buf, data, 2); + buf[0] &= ~0x80; + + dev_dbg(dev, "WRITE: %02x %02x\n", buf[0], buf[1]); + return spi_write_then_read(spi, buf, 2, NULL, 0); +} + +static int ili9322_regmap_spi_read(void *context, const void *reg, + size_t reg_size, void *val, size_t val_size) +{ + struct device *dev = context; + struct spi_device *spi = to_spi_device(dev); + u8 buf[1]; + + /* Set bit 7 to 1 to read */ + memcpy(buf, reg, 1); + dev_dbg(dev, "READ: %02x reg size = %zu, val size = %zu\n", + buf[0], reg_size, val_size); + buf[0] |= 0x80; + + return spi_write_then_read(spi, buf, 1, val, 1); +} + +static struct regmap_bus ili9322_regmap_bus = { + .write = ili9322_regmap_spi_write, + .read = ili9322_regmap_spi_read, + .reg_format_endian_default = REGMAP_ENDIAN_BIG, + .val_format_endian_default = REGMAP_ENDIAN_BIG, +}; + +static bool ili9322_volatile_reg(struct device *dev, unsigned int reg) +{ + return false; +} + +static bool ili9322_writeable_reg(struct device *dev, unsigned int reg) +{ + /* Just register 0 is read-only */ + if (reg == 0x00) + return false; + return true; +} + +const struct regmap_config ili9322_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = 0x44, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = ili9322_volatile_reg, + .writeable_reg = ili9322_writeable_reg, +}; + +static int ili9322_init(struct drm_panel *panel, struct ili9322 *ili) +{ + struct drm_connector *connector = panel->connector; + u8 reg; + int ret; + int i; + + /* Reset display */ + ret = regmap_write(ili->regmap, ILI9322_GLOBAL_RESET, + ILI9322_GLOBAL_RESET_ASSERT); + if (ret) { + dev_err(ili->dev, "can't issue GRESET (%d)\n", ret); + return ret; + } + + /* Set up the main voltage regulator */ + if (ili->vreg1out != U8_MAX) { + ret = regmap_write(ili->regmap, ILI9322_VREG1_VOLTAGE, + ili->vreg1out); + if (ret) { + dev_err(ili->dev, "can't set up VREG1OUT (%d)\n", ret); + return ret; + } + } + + if (ili->vcom_amplitude != U8_MAX) { + ret = regmap_write(ili->regmap, ILI9322_VCOM_AMP, + ili->vcom_amplitude); + if (ret) { + dev_err(ili->dev, + "can't set up VCOM amplitude (%d)\n", ret); + return ret; + } + }; + + if (ili->vcom_high != U8_MAX) { + ret = regmap_write(ili->regmap, ILI9322_VCOM_HIGH, + ili->vcom_high); + if (ret) { + dev_err(ili->dev, "can't set up VCOM high (%d)\n", ret); + return ret; + } + }; + + /* Set up gamma correction */ + for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) { + ret = regmap_write(ili->regmap, ILI9322_GAMMA_1 + i, + ili->gamma[i]); + if (ret) { + dev_err(ili->dev, + "can't write gamma V%d to 0x%02x (%d)\n", + i + 1, ILI9322_GAMMA_1 + i, ret); + return ret; + } + } + + /* + * Polarity and inverted color order for RGB input. + * None of this applies in the BT.656 mode. + */ + if (ili->conf->dclk_active_high) { + reg = ILI9322_POL_DCLK; + connector->display_info.bus_flags |= + DRM_BUS_FLAG_PIXDATA_POSEDGE; + } else { + reg = 0; + connector->display_info.bus_flags |= + DRM_BUS_FLAG_PIXDATA_NEGEDGE; + } + if (ili->conf->de_active_high) { + reg |= ILI9322_POL_DE; + connector->display_info.bus_flags |= + DRM_BUS_FLAG_DE_HIGH; + } else { + connector->display_info.bus_flags |= + DRM_BUS_FLAG_DE_LOW; + } + if (ili->conf->hsync_active_high) + reg |= ILI9322_POL_HSYNC; + if (ili->conf->vsync_active_high) + reg |= ILI9322_POL_VSYNC; + ret = regmap_write(ili->regmap, ILI9322_POL, reg); + if (ret) { + dev_err(ili->dev, "can't write POL register (%d)\n", ret); + return ret; + } + + /* + * Set up interface control. + * This is not used in the BT.656 mode (no H/Vsync or DE signals). + */ + reg = ili->conf->syncmode; + reg |= ILI9322_IF_CTRL_LINE_INVERSION; + ret = regmap_write(ili->regmap, ILI9322_IF_CTRL, reg); + if (ret) { + dev_err(ili->dev, "can't write IF CTRL register (%d)\n", ret); + return ret; + } + + /* Set up the input mode */ + reg = (ili->input << 4); + /* These are inverted, setting to 1 is the default, clearing flips */ + if (!ili->conf->flip_horizontal) + reg |= ILI9322_ENTRY_HDIR; + if (!ili->conf->flip_vertical) + reg |= ILI9322_ENTRY_VDIR; + reg |= ILI9322_ENTRY_AUTODETECT; + ret = regmap_write(ili->regmap, ILI9322_ENTRY, reg); + if (ret) { + dev_err(ili->dev, "can't write ENTRY reg (%d)\n", ret); + return ret; + } + dev_info(ili->dev, "display is in %s mode, syncmode %02x\n", + ili9322_inputs[ili->input], + ili->conf->syncmode); + + dev_info(ili->dev, "initialized display\n"); + + return 0; +} + +/* + * This power-on sequence if from the datasheet, page 57. + */ +static int ili9322_power_on(struct ili9322 *ili) +{ + int ret; + + /* Assert RESET */ + gpiod_set_value(ili->reset_gpio, 1); + + ret = regulator_bulk_enable(ARRAY_SIZE(ili->supplies), ili->supplies); + if (ret < 0) { + dev_err(ili->dev, "unable to enable regulators\n"); + return ret; + } + msleep(20); + + /* De-assert RESET */ + gpiod_set_value(ili->reset_gpio, 0); + + msleep(10); + + return 0; +} + +static int ili9322_power_off(struct ili9322 *ili) +{ + return regulator_bulk_disable(ARRAY_SIZE(ili->supplies), ili->supplies); +} + +static int ili9322_disable(struct drm_panel *panel) +{ + struct ili9322 *ili = panel_to_ili9322(panel); + int ret; + + ret = regmap_write(ili->regmap, ILI9322_POW_CTRL, + ILI9322_POW_CTRL_STANDBY); + if (ret) { + dev_err(ili->dev, "unable to go to standby mode\n"); + return ret; + } + + return 0; +} + +static int ili9322_unprepare(struct drm_panel *panel) +{ + struct ili9322 *ili = panel_to_ili9322(panel); + + return ili9322_power_off(ili); +} + +static int ili9322_prepare(struct drm_panel *panel) +{ + struct ili9322 *ili = panel_to_ili9322(panel); + int ret; + + ret = ili9322_power_on(ili); + if (ret < 0) + return ret; + + ret = ili9322_init(panel, ili); + if (ret < 0) + ili9322_unprepare(panel); + + return ret; +} + +static int ili9322_enable(struct drm_panel *panel) +{ + struct ili9322 *ili = panel_to_ili9322(panel); + int ret; + + ret = regmap_write(ili->regmap, ILI9322_POW_CTRL, + ILI9322_POW_CTRL_DEFAULT); + if (ret) { + dev_err(ili->dev, "unable to enable panel\n"); + return ret; + } + + return 0; +} + +/* Serial RGB modes */ +static const struct drm_display_mode srgb_320x240_mode = { + .clock = 2453500, + .hdisplay = 320, + .hsync_start = 320 + 359, + .hsync_end = 320 + 359 + 1, + .htotal = 320 + 359 + 1 + 241, + .vdisplay = 240, + .vsync_start = 240 + 4, + .vsync_end = 240 + 4 + 1, + .vtotal = 262, + .vrefresh = 60, + .flags = 0, +}; + +static const struct drm_display_mode srgb_360x240_mode = { + .clock = 2700000, + .hdisplay = 360, + .hsync_start = 360 + 35, + .hsync_end = 360 + 35 + 1, + .htotal = 360 + 35 + 1 + 241, + .vdisplay = 240, + .vsync_start = 240 + 21, + .vsync_end = 240 + 21 + 1, + .vtotal = 262, + .vrefresh = 60, + .flags = 0, +}; + +/* This is the only mode listed for parallel RGB in the datasheet */ +static const struct drm_display_mode prgb_320x240_mode = { + .clock = 6400000, + .hdisplay = 320, + .hsync_start = 320 + 38, + .hsync_end = 320 + 38 + 1, + .htotal = 320 + 38 + 1 + 50, + .vdisplay = 240, + .vsync_start = 240 + 4, + .vsync_end = 240 + 4 + 1, + .vtotal = 262, + .vrefresh = 60, + .flags = 0, +}; + +/* YUV modes */ +static const struct drm_display_mode yuv_640x320_mode = { + .clock = 2454000, + .hdisplay = 640, + .hsync_start = 640 + 252, + .hsync_end = 640 + 252 + 1, + .htotal = 640 + 252 + 1 + 28, + .vdisplay = 320, + .vsync_start = 320 + 4, + .vsync_end = 320 + 4 + 1, + .vtotal = 320 + 4 + 1 + 18, + .vrefresh = 60, + .flags = 0, +}; + +static const struct drm_display_mode yuv_720x360_mode = { + .clock = 2700000, + .hdisplay = 720, + .hsync_start = 720 + 252, + .hsync_end = 720 + 252 + 1, + .htotal = 720 + 252 + 1 + 24, + .vdisplay = 360, + .vsync_start = 360 + 4, + .vsync_end = 360 + 4 + 1, + .vtotal = 360 + 4 + 1 + 18, + .vrefresh = 60, + .flags = 0, +}; + +/* BT.656 VGA mode, 640x480 */ +static const struct drm_display_mode itu_r_bt_656_640_mode = { + .clock = 2454000, + .hdisplay = 640, + .hsync_start = 640 + 3, + .hsync_end = 640 + 3 + 1, + .htotal = 640 + 3 + 1 + 272, + .vdisplay = 480, + .vsync_start = 480 + 4, + .vsync_end = 480 + 4 + 1, + .vtotal = 500, + .vrefresh = 60, + .flags = 0, +}; + +/* BT.656 D1 mode 720x480 */ +static const struct drm_display_mode itu_r_bt_656_720_mode = { + .clock = 2700000, + .hdisplay = 720, + .hsync_start = 720 + 3, + .hsync_end = 720 + 3 + 1, + .htotal = 720 + 3 + 1 + 272, + .vdisplay = 480, + .vsync_start = 480 + 4, + .vsync_end = 480 + 4 + 1, + .vtotal = 500, + .vrefresh = 60, + .flags = 0, +}; + +static int ili9322_get_modes(struct drm_panel *panel) +{ + struct drm_connector *connector = panel->connector; + struct ili9322 *ili = panel_to_ili9322(panel); + struct drm_display_mode *mode; + + strncpy(connector->display_info.name, "ILI9322 TFT LCD driver\0", + DRM_DISPLAY_INFO_LEN); + connector->display_info.width_mm = ili->conf->width_mm; + connector->display_info.height_mm = ili->conf->height_mm; + + switch (ili->input) { + case ILI9322_INPUT_SRGB_DUMMY_320X240: + mode = drm_mode_duplicate(panel->drm, &srgb_320x240_mode); + break; + case ILI9322_INPUT_SRGB_DUMMY_360X240: + mode = drm_mode_duplicate(panel->drm, &srgb_360x240_mode); + break; + case ILI9322_INPUT_PRGB_THROUGH: + case ILI9322_INPUT_PRGB_ALIGNED: + mode = drm_mode_duplicate(panel->drm, &prgb_320x240_mode); + break; + case ILI9322_INPUT_YUV_640X320_YCBCR: + mode = drm_mode_duplicate(panel->drm, &yuv_640x320_mode); + break; + case ILI9322_INPUT_YUV_720X360_YCBCR: + mode = drm_mode_duplicate(panel->drm, &yuv_720x360_mode); + break; + case ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR: + mode = drm_mode_duplicate(panel->drm, &itu_r_bt_656_720_mode); + break; + case ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR: + mode = drm_mode_duplicate(panel->drm, &itu_r_bt_656_640_mode); + break; + default: + mode = NULL; + break; + } + if (!mode) { + DRM_ERROR("bad mode or failed to add mode\n"); + return -EINVAL; + } + drm_mode_set_name(mode); + /* + * This is the preferred mode because most people are going + * to want to use the display with VGA type graphics. + */ + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + + /* Set up the polarity */ + if (ili->conf->hsync_active_high) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (ili->conf->vsync_active_high) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; + + mode->width_mm = ili->conf->width_mm; + mode->height_mm = ili->conf->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; /* Number of modes */ +} + +static const struct drm_panel_funcs ili9322_drm_funcs = { + .disable = ili9322_disable, + .unprepare = ili9322_unprepare, + .prepare = ili9322_prepare, + .enable = ili9322_enable, + .get_modes = ili9322_get_modes, +}; + +static int ili9322_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct ili9322 *ili; + const struct regmap_config *regmap_config; + u8 gamma; + u32 val; + int ret; + int i; + + ili = devm_kzalloc(dev, sizeof(struct ili9322), GFP_KERNEL); + if (!ili) + return -ENOMEM; + + spi_set_drvdata(spi, ili); + + ili->dev = dev; + + /* + * Every new incarnation of this display must have a unique + * data entry for the system in this driver. + */ + ili->conf = of_device_get_match_data(dev); + if (!ili->conf) { + dev_err(dev, "missing device configuration\n"); + return -ENODEV; + } + + val = ili->conf->vreg1out_mv; + if (!val) { + /* Default HW value, do not touch (should be 4.5V) */ + ili->vreg1out = U8_MAX; + } else { + if (val < 3600) { + dev_err(dev, "too low VREG1OUT\n"); + return -EINVAL; + } + if (val > 6000) { + dev_err(dev, "too high VREG1OUT\n"); + return -EINVAL; + } + if ((val % 100) != 0) { + dev_err(dev, "VREG1OUT is no even 100 microvolt\n"); + return -EINVAL; + } + val -= 3600; + val /= 100; + dev_dbg(dev, "VREG1OUT = 0x%02x\n", val); + ili->vreg1out = val; + } + + val = ili->conf->vcom_high_percent; + if (!val) { + /* Default HW value, do not touch (should be 91%) */ + ili->vcom_high = U8_MAX; + } else { + if (val < 37) { + dev_err(dev, "too low VCOM high\n"); + return -EINVAL; + } + if (val > 100) { + dev_err(dev, "too high VCOM high\n"); + return -EINVAL; + } + val -= 37; + dev_dbg(dev, "VCOM high = 0x%02x\n", val); + ili->vcom_high = val; + } + + val = ili->conf->vcom_amplitude_percent; + if (!val) { + /* Default HW value, do not touch (should be 114%) */ + ili->vcom_high = U8_MAX; + } else { + if (val < 70) { + dev_err(dev, "too low VCOM amplitude\n"); + return -EINVAL; + } + if (val > 132) { + dev_err(dev, "too high VCOM amplitude\n"); + return -EINVAL; + } + val -= 70; + val >>= 1; /* Increments of 2% */ + dev_dbg(dev, "VCOM amplitude = 0x%02x\n", val); + ili->vcom_amplitude = val; + } + + for (i = 0; i < ARRAY_SIZE(ili->gamma); i++) { + val = ili->conf->gamma_corr_neg[i]; + if (val > 15) { + dev_err(dev, "negative gamma %u > 15, capping\n", val); + val = 15; + } + gamma = val << 4; + val = ili->conf->gamma_corr_pos[i]; + if (val > 15) { + dev_err(dev, "positive gamma %u > 15, capping\n", val); + val = 15; + } + gamma |= val; + ili->gamma[i] = gamma; + dev_dbg(dev, "gamma V%d: 0x%02x\n", i + 1, gamma); + } + + ili->supplies[0].supply = "vcc"; /* 2.7-3.6 V */ + ili->supplies[1].supply = "iovcc"; /* 1.65-3.6V */ + ili->supplies[2].supply = "vci"; /* 2.7-3.6V */ + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ili->supplies), + ili->supplies); + if (ret < 0) + return ret; + ret = regulator_set_voltage(ili->supplies[0].consumer, + 2700000, 3600000); + if (ret) + return ret; + ret = regulator_set_voltage(ili->supplies[1].consumer, + 1650000, 3600000); + if (ret) + return ret; + ret = regulator_set_voltage(ili->supplies[2].consumer, + 2700000, 3600000); + if (ret) + return ret; + + ili->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ili->reset_gpio)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(ili->reset_gpio); + } + + spi->bits_per_word = 8; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(dev, "spi setup failed.\n"); + return ret; + } + regmap_config = &ili9322_regmap_config; + ili->regmap = devm_regmap_init(dev, &ili9322_regmap_bus, dev, + regmap_config); + if (IS_ERR(ili->regmap)) { + dev_err(dev, "failed to allocate register map\n"); + return PTR_ERR(ili->regmap); + } + + ret = regmap_read(ili->regmap, ILI9322_CHIP_ID, &val); + if (ret) { + dev_err(dev, "can't get chip ID (%d)\n", ret); + return ret; + } + if (val != ILI9322_CHIP_ID_MAGIC) { + dev_err(dev, "chip ID 0x%0x2, expected 0x%02x\n", val, + ILI9322_CHIP_ID_MAGIC); + return -ENODEV; + } + + /* Probe the system to find the display setting */ + if (ili->conf->input == ILI9322_INPUT_UNKNOWN) { + ret = regmap_read(ili->regmap, ILI9322_ENTRY, &val); + if (ret) { + dev_err(dev, "can't get entry setting (%d)\n", ret); + return ret; + } + /* Input enum corresponds to HW setting */ + ili->input = (val >> 4) & 0x0f; + if (ili->input >= ILI9322_INPUT_UNKNOWN) + ili->input = ILI9322_INPUT_UNKNOWN; + } else { + ili->input = ili->conf->input; + } + + drm_panel_init(&ili->panel); + ili->panel.dev = dev; + ili->panel.funcs = &ili9322_drm_funcs; + + return drm_panel_add(&ili->panel); +} + +static int ili9322_remove(struct spi_device *spi) +{ + struct ili9322 *ili = spi_get_drvdata(spi); + + ili9322_power_off(ili); + drm_panel_remove(&ili->panel); + + return 0; +} + +/* + * The D-Link DIR-685 panel is marked LM918A01-1A SY-B4-091116-E0199 + */ +static const struct ili9322_config ili9322_dir_685 = { + .width_mm = 65, + .height_mm = 50, + .input = ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR, + .vreg1out_mv = 4600, + .vcom_high_percent = 91, + .vcom_amplitude_percent = 114, + .syncmode = ILI9322_IF_CTRL_SYNC_DISABLED, + .dclk_active_high = true, + .gamma_corr_neg = { 0xa, 0x5, 0x7, 0x7, 0x7, 0x5, 0x1, 0x6 }, + .gamma_corr_pos = { 0x7, 0x7, 0x3, 0x2, 0x3, 0x5, 0x7, 0x2 }, +}; + +static const struct of_device_id ili9322_of_match[] = { + { + .compatible = "dlink,dir-685-panel", + .data = &ili9322_dir_685, + }, + { + .compatible = "ilitek,ili9322", + .data = NULL, + }, + { } +}; +MODULE_DEVICE_TABLE(of, ili9322_of_match); + +static struct spi_driver ili9322_driver = { + .probe = ili9322_probe, + .remove = ili9322_remove, + .driver = { + .name = "panel-ilitek-ili9322", + .of_match_table = ili9322_of_match, + }, +}; +module_spi_driver(ili9322_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("ILI9322 LCD panel driver"); +MODULE_LICENSE("GPL v2"); |