drm/tilcdc: add TI LCD Controller DRM driver (v4)

A simple DRM/KMS driver for the TI LCD Controller found in various
smaller TI parts (AM33xx, OMAPL138, etc).  This driver uses the
CMA helpers.  Currently only the TFP410 DVI encoder is supported
(tested with beaglebone + DVI cape).  There are also various LCD
displays, for which support can be added (as I get hw to test on),
and an external i2c HDMI encoder found on some boards.

The display controller supports a single CRTC.  And the encoder+
connector are split out into sub-devices.  Depending on which LCD
or external encoder is actually present, the appropriate output
module(s) will be loaded.

v1: original
v2: fix fb refcnting and few other cleanups
v3: get +/- vsync/hsync from timings rather than panel-info, add
    option DT max-bandwidth field so driver doesn't attempt to
    pick a display mode with too high memory bandwidth, and other
    small cleanups
v4: remove some unneeded stuff from panel-info struct, properly
    set high bits for hfp/hsw/hbp for rev 2, add DT bindings docs

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Koen Kooi <koen@dominion.thruhere.net>

1 files changed, 150 insertions, 0 deletions

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_drv.h b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
new file mode 100644
index 000000000000..8242b5a4307b
--- /dev/null
+++ b/drivers/gpu/drm/tilcdc/tilcdc_drv.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2012 Texas Instruments
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __TILCDC_DRV_H__
+#define __TILCDC_DRV_H__
+
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_fb_cma_helper.h>
+
+struct tilcdc_drm_private {
+	void __iomem *mmio;
+
+	struct clk *disp_clk;    /* display dpll */
+	struct clk *clk;         /* functional clock */
+	int rev;                 /* IP revision */
+
+	/* don't attempt resolutions w/ higher W * H * Hz: */
+	uint32_t max_bandwidth;
+
+	/* register contents saved across suspend/resume: */
+	u32 saved_register[12];
+
+#ifdef CONFIG_CPU_FREQ
+	struct notifier_block freq_transition;
+	unsigned int lcd_fck_rate;
+#endif
+
+	struct workqueue_struct *wq;
+
+	struct drm_fbdev_cma *fbdev;
+
+	struct drm_crtc *crtc;
+
+	unsigned int num_encoders;
+	struct drm_encoder *encoders[8];
+
+	unsigned int num_connectors;
+	struct drm_connector *connectors[8];
+};
+
+/* Sub-module for display.  Since we don't know at compile time what panels
+ * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
+ * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
+ * separate drivers.  If they are probed and found to be present, they
+ * register themselves with tilcdc_register_module().
+ */
+struct tilcdc_module;
+
+struct tilcdc_module_ops {
+	/* create appropriate encoders/connectors: */
+	int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
+	void (*destroy)(struct tilcdc_module *mod);
+#ifdef CONFIG_DEBUG_FS
+	/* create debugfs nodes (can be NULL): */
+	int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
+	/* cleanup debugfs nodes (can be NULL): */
+	void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
+#endif
+};
+
+struct tilcdc_module {
+	const char *name;
+	struct list_head list;
+	const struct tilcdc_module_ops *funcs;
+};
+
+void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
+		const struct tilcdc_module_ops *funcs);
+void tilcdc_module_cleanup(struct tilcdc_module *mod);
+
+
+/* Panel config that needs to be set in the crtc, but is not coming from
+ * the mode timings.  The display module is expected to call
+ * tilcdc_crtc_set_panel_info() to set this during modeset.
+ */
+struct tilcdc_panel_info {
+
+	/* AC Bias Pin Frequency */
+	uint32_t ac_bias;
+
+	/* AC Bias Pin Transitions per Interrupt */
+	uint32_t ac_bias_intrpt;
+
+	/* DMA burst size */
+	uint32_t dma_burst_sz;
+
+	/* Bits per pixel */
+	uint32_t bpp;
+
+	/* FIFO DMA Request Delay */
+	uint32_t fdd;
+
+	/* TFT Alternative Signal Mapping (Only for active) */
+	bool tft_alt_mode;
+
+	/* Invert pixel clock */
+	bool invert_pxl_clk;
+
+	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
+	uint32_t sync_edge;
+
+	/* Horizontal and Vertical Sync: Control: 0=ignore */
+	uint32_t sync_ctrl;
+
+	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
+	uint32_t raster_order;
+
+	/* DMA FIFO threshold */
+	uint32_t fifo_th;
+};
+
+#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
+
+struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev);
+void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file);
+irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
+void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
+void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
+		const struct tilcdc_panel_info *info);
+int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
+int tilcdc_crtc_max_width(struct drm_crtc *crtc);
+
+#endif /* __TILCDC_DRV_H__ */