drm/msm/dsi: Split PHY drivers to separate files

This change moves each PHY type specific code into
separate files.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

6 files changed, 857 insertions, 758 deletions

diff --git a/drivers/gpu/drm/msm/Makefile b/drivers/gpu/drm/msm/Makefile
index 14d167ef86c9..30f998ad9471 100644
--- a/drivers/gpu/drm/msm/Makefile
+++ b/drivers/gpu/drm/msm/Makefile
@@ -1,5 +1,5 @@
 ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
-ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi
+ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
 
 msm-y := \
 	adreno/adreno_device.o \
@@ -56,7 +56,9 @@ msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
 msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
 			dsi/dsi_host.o \
 			dsi/dsi_manager.o \
-			dsi/dsi_phy.o \
+			dsi/phy/dsi_phy.o \
+			dsi/phy/dsi_phy_20nm.o \
+			dsi/phy/dsi_phy_28nm.o \
 			mdp/mdp5/mdp5_cmd_encoder.o
 
 msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \
diff --git a/drivers/gpu/drm/msm/dsi/dsi_phy.c b/drivers/gpu/drm/msm/dsi/dsi_phy.c
deleted file mode 100644
index 77f1efe4e013..000000000000
--- a/drivers/gpu/drm/msm/dsi/dsi_phy.c
+++ /dev/null
@@ -1,756 +0,0 @@
-/*
- * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-
-#include "dsi.h"
-#include "dsi.xml.h"
-
-#define dsi_phy_read(offset) msm_readl((offset))
-#define dsi_phy_write(offset, data) msm_writel((data), (offset))
-
-struct dsi_phy_ops {
-	int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
-		const unsigned long bit_rate, const unsigned long esc_rate);
-	void (*disable)(struct msm_dsi_phy *phy);
-};
-
-struct dsi_phy_cfg {
-	enum msm_dsi_phy_type type;
-	struct dsi_reg_config reg_cfg;
-	struct dsi_phy_ops ops;
-
-	/* Each cell {phy_id, pll_id} of the truth table indicates
-	 * if the source PLL is on the right side of the PHY.
-	 * Fill default H/W values in illegal cells, eg. cell {0, 1}.
-	 */
-	bool src_pll_truthtable[DSI_MAX][DSI_MAX];
-};
-
-struct dsi_dphy_timing {
-	u32 clk_pre;
-	u32 clk_post;
-	u32 clk_zero;
-	u32 clk_trail;
-	u32 clk_prepare;
-	u32 hs_exit;
-	u32 hs_zero;
-	u32 hs_prepare;
-	u32 hs_trail;
-	u32 hs_rqst;
-	u32 ta_go;
-	u32 ta_sure;
-	u32 ta_get;
-};
-
-struct msm_dsi_phy {
-	struct platform_device *pdev;
-	void __iomem *base;
-	void __iomem *reg_base;
-	int id;
-
-	struct clk *ahb_clk;
-	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
-
-	struct dsi_dphy_timing timing;
-	const struct dsi_phy_cfg *cfg;
-
-	bool regulator_ldo_mode;
-
-	struct msm_dsi_pll *pll;
-};
-
-static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
-{
-	struct regulator_bulk_data *s = phy->supplies;
-	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
-	struct device *dev = &phy->pdev->dev;
-	int num = phy->cfg->reg_cfg.num;
-	int i, ret;
-
-	for (i = 0; i < num; i++)
-		s[i].supply = regs[i].name;
-
-	ret = devm_regulator_bulk_get(&phy->pdev->dev, num, s);
-	if (ret < 0) {
-		dev_err(dev, "%s: failed to init regulator, ret=%d\n",
-						__func__, ret);
-		return ret;
-	}
-
-	for (i = 0; i < num; i++) {
-		if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
-			ret = regulator_set_voltage(s[i].consumer,
-				regs[i].min_voltage, regs[i].max_voltage);
-			if (ret < 0) {
-				dev_err(dev,
-					"regulator %d set voltage failed, %d\n",
-					i, ret);
-				return ret;
-			}
-		}
-	}
-
-	return 0;
-}
-
-static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
-{
-	struct regulator_bulk_data *s = phy->supplies;
-	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
-	int num = phy->cfg->reg_cfg.num;
-	int i;
-
-	DBG("");
-	for (i = num - 1; i >= 0; i--)
-		if (regs[i].disable_load >= 0)
-			regulator_set_load(s[i].consumer,
-						regs[i].disable_load);
-
-	regulator_bulk_disable(num, s);
-}
-
-static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
-{
-	struct regulator_bulk_data *s = phy->supplies;
-	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
-	struct device *dev = &phy->pdev->dev;
-	int num = phy->cfg->reg_cfg.num;
-	int ret, i;
-
-	DBG("");
-	for (i = 0; i < num; i++) {
-		if (regs[i].enable_load >= 0) {
-			ret = regulator_set_load(s[i].consumer,
-							regs[i].enable_load);
-			if (ret < 0) {
-				dev_err(dev,
-					"regulator %d set op mode failed, %d\n",
-					i, ret);
-				goto fail;
-			}
-		}
-	}
-
-	ret = regulator_bulk_enable(num, s);
-	if (ret < 0) {
-		dev_err(dev, "regulator enable failed, %d\n", ret);
-		goto fail;
-	}
-
-	return 0;
-
-fail:
-	for (i--; i >= 0; i--)
-		regulator_set_load(s[i].consumer, regs[i].disable_load);
-	return ret;
-}
-
-static void dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
-				u32 bit_mask)
-{
-	int phy_id = phy->id;
-	u32 val;
-
-	if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
-		return;
-
-	val = dsi_phy_read(phy->base + reg);
-
-	if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
-		dsi_phy_write(phy->base + reg, val | bit_mask);
-	else
-		dsi_phy_write(phy->base + reg, val & (~bit_mask));
-}
-
-#define S_DIV_ROUND_UP(n, d)	\
-	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
-
-static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
-				s32 min_result, bool even)
-{
-	s32 v;
-	v = (tmax - tmin) * percent;
-	v = S_DIV_ROUND_UP(v, 100) + tmin;
-	if (even && (v & 0x1))
-		return max_t(s32, min_result, v - 1);
-	else
-		return max_t(s32, min_result, v);
-}
-
-static void dsi_dphy_timing_calc_clk_zero(struct dsi_dphy_timing *timing,
-					s32 ui, s32 coeff, s32 pcnt)
-{
-	s32 tmax, tmin, clk_z;
-	s32 temp;
-
-	/* reset */
-	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
-	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
-	if (tmin > 255) {
-		tmax = 511;
-		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
-	} else {
-		tmax = 255;
-		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
-	}
-
-	/* adjust */
-	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
-	timing->clk_zero = clk_z + 8 - temp;
-}
-
-static int dsi_dphy_timing_calc(struct dsi_dphy_timing *timing,
-	const unsigned long bit_rate, const unsigned long esc_rate)
-{
-	s32 ui, lpx;
-	s32 tmax, tmin;
-	s32 pcnt0 = 10;
-	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
-	s32 pcnt2 = 10;
-	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
-	s32 coeff = 1000; /* Precision, should avoid overflow */
-	s32 temp;
-
-	if (!bit_rate || !esc_rate)
-		return -EINVAL;
-
-	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
-	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
-
-	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
-	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
-	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
-
-	temp = lpx / ui;
-	if (temp & 0x1)
-		timing->hs_rqst = temp;
-	else
-		timing->hs_rqst = max_t(s32, 0, temp - 2);
-
-	/* Calculate clk_zero after clk_prepare and hs_rqst */
-	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
-
-	temp = 105 * coeff + 12 * ui - 20 * coeff;
-	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
-	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
-	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
-
-	temp = 85 * coeff + 6 * ui;
-	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
-	temp = 40 * coeff + 4 * ui;
-	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
-	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
-
-	tmax = 255;
-	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
-	temp = 145 * coeff + 10 * ui - temp;
-	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
-	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
-
-	temp = 105 * coeff + 12 * ui - 20 * coeff;
-	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
-	temp = 60 * coeff + 4 * ui;
-	tmin = DIV_ROUND_UP(temp, ui) - 2;
-	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
-
-	tmax = 255;
-	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
-	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
-
-	tmax = 63;
-	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
-	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
-	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
-	timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
-
-	tmax = 63;
-	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
-	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
-	temp += 8 * ui + lpx;
-	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
-	if (tmin > tmax) {
-		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false) >> 1;
-		timing->clk_pre = temp >> 1;
-		temp = (2 * tmax - tmin) * pcnt2;
-	} else {
-		timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
-	}
-
-	timing->ta_go = 3;
-	timing->ta_sure = 0;
-	timing->ta_get = 4;
-
-	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
-		timing->clk_pre, timing->clk_post, timing->clk_zero,
-		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
-		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
-		timing->hs_rqst);
-
-	return 0;
-}
-
-static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
-{
-	void __iomem *base = phy->reg_base;
-
-	if (!enable) {
-		dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
-		return;
-	}
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
-}
-
-static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
-		const unsigned long bit_rate, const unsigned long esc_rate)
-{
-	struct dsi_dphy_timing *timing = &phy->timing;
-	int i;
-	void __iomem *base = phy->base;
-
-	DBG("");
-
-	if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
-		pr_err("%s: D-PHY timing calculation failed\n", __func__);
-		return -EINVAL;
-	}
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
-
-	dsi_28nm_phy_regulator_ctrl(phy, true);
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
-		DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
-		DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
-		DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
-	if (timing->clk_zero & BIT(8))
-		dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
-			DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
-		DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
-		DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
-		DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
-		DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
-		DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
-		DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
-		DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
-		DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
-	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
-		DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
-
-	for (i = 0; i < 4; i++) {
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
-		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
-	}
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
-	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
-
-	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
-
-	dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
-			DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
-
-	return 0;
-}
-
-static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
-{
-	dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
-	dsi_28nm_phy_regulator_ctrl(phy, false);
-
-	/*
-	 * Wait for the registers writes to complete in order to
-	 * ensure that the phy is completely disabled
-	 */
-	wmb();
-}
-
-static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
-{
-	void __iomem *base = phy->reg_base;
-
-	if (!enable) {
-		dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
-		return;
-	}
-
-	if (phy->regulator_ldo_mode) {
-		dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
-		return;
-	}
-
-	/* non LDO mode */
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
-	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
-}
-
-static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
-		const unsigned long bit_rate, const unsigned long esc_rate)
-{
-	struct dsi_dphy_timing *timing = &phy->timing;
-	int i;
-	void __iomem *base = phy->base;
-	u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
-
-	DBG("");
-
-	if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
-		pr_err("%s: D-PHY timing calculation failed\n", __func__);
-		return -EINVAL;
-	}
-
-	dsi_20nm_phy_regulator_ctrl(phy, true);
-
-	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
-
-	dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
-			DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
-
-	for (i = 0; i < 4; i++) {
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
-							(i >> 1) * 0x40);
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
-		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
-	}
-
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
-
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
-		DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
-		DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
-		DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
-	if (timing->clk_zero & BIT(8))
-		dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
-			DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
-		DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
-		DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
-		DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
-		DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
-		DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
-		DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
-		DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
-		DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
-	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
-		DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
-
-	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
-
-	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
-
-	/* make sure everything is written before enable */
-	wmb();
-	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
-
-	return 0;
-}
-
-static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
-{
-	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
-	dsi_20nm_phy_regulator_ctrl(phy, false);
-}
-
-static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
-{
-	int ret;
-
-	pm_runtime_get_sync(&phy->pdev->dev);
-
-	ret = clk_prepare_enable(phy->ahb_clk);
-	if (ret) {
-		pr_err("%s: can't enable ahb clk, %d\n", __func__, ret);
-		pm_runtime_put_sync(&phy->pdev->dev);
-	}
-
-	return ret;
-}
-
-static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
-{
-	clk_disable_unprepare(phy->ahb_clk);
-	pm_runtime_put_sync(&phy->pdev->dev);
-}
-
-static const struct dsi_phy_cfg dsi_phy_cfgs[MSM_DSI_PHY_MAX] = {
-	[MSM_DSI_PHY_28NM_HPM] = {
-		.type = MSM_DSI_PHY_28NM_HPM,
-		.src_pll_truthtable = { {true, true}, {false, true} },
-		.reg_cfg = {
-			.num = 1,
-			.regs = {
-				{"vddio", 1800000, 1800000, 100000, 100},
-			},
-		},
-		.ops = {
-			.enable = dsi_28nm_phy_enable,
-			.disable = dsi_28nm_phy_disable,
-		}
-	},
-	[MSM_DSI_PHY_28NM_LP] = {
-		.type = MSM_DSI_PHY_28NM_LP,
-		.src_pll_truthtable = { {true, true}, {true, true} },
-		.reg_cfg = {
-			.num = 1,
-			.regs = {
-				{"vddio", 1800000, 1800000, 100000, 100},
-			},
-		},
-		.ops = {
-			.enable = dsi_28nm_phy_enable,
-			.disable = dsi_28nm_phy_disable,
-		}
-	},
-	[MSM_DSI_PHY_20NM] = {
-		.type = MSM_DSI_PHY_20NM,
-		.src_pll_truthtable = { {false, true}, {false, true} },
-		.reg_cfg = {
-			.num = 2,
-			.regs = {
-				{"vddio", 1800000, 1800000, 100000, 100},
-				{"vcca", 1000000, 1000000, 10000, 100},
-			},
-		},
-		.ops = {
-			.enable = dsi_20nm_phy_enable,
-			.disable = dsi_20nm_phy_disable,
-		}
-	},
-};
-
-static const struct of_device_id dsi_phy_dt_match[] = {
-	{ .compatible = "qcom,dsi-phy-28nm-hpm",
-	  .data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_HPM],},
-	{ .compatible = "qcom,dsi-phy-28nm-lp",
-	  .data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_LP],},
-	{ .compatible = "qcom,dsi-phy-20nm",
-	  .data = &dsi_phy_cfgs[MSM_DSI_PHY_20NM],},
-	{}
-};
-
-static int dsi_phy_driver_probe(struct platform_device *pdev)
-{
-	struct msm_dsi_phy *phy;
-	const struct of_device_id *match;
-	int ret;
-
-	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-	if (!phy)
-		return -ENOMEM;
-
-	match = of_match_node(dsi_phy_dt_match, pdev->dev.of_node);
-	if (!match)
-		return -ENODEV;
-
-	phy->cfg = match->data;
-	phy->pdev = pdev;
-
-	ret = of_property_read_u32(pdev->dev.of_node,
-				"qcom,dsi-phy-index", &phy->id);
-	if (ret) {
-		dev_err(&pdev->dev,
-			"%s: PHY index not specified, ret=%d\n",
-			__func__, ret);
-		goto fail;
-	}
-
-	phy->regulator_ldo_mode = of_property_read_bool(pdev->dev.of_node,
-				"qcom,dsi-phy-regulator-ldo-mode");
-
-	phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
-	if (IS_ERR(phy->base)) {
-		dev_err(&pdev->dev, "%s: failed to map phy base\n", __func__);
-		ret = -ENOMEM;
-		goto fail;
-	}
-	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", "DSI_PHY_REG");
-	if (IS_ERR(phy->reg_base)) {
-		dev_err(&pdev->dev,
-			"%s: failed to map phy regulator base\n", __func__);
-		ret = -ENOMEM;
-		goto fail;
-	}
-
-	ret = dsi_phy_regulator_init(phy);
-	if (ret) {
-		dev_err(&pdev->dev, "%s: failed to init regulator\n", __func__);
-		goto fail;
-	}
-
-	phy->ahb_clk = devm_clk_get(&pdev->dev, "iface_clk");
-	if (IS_ERR(phy->ahb_clk)) {
-		pr_err("%s: Unable to get ahb clk\n", __func__);
-		ret = PTR_ERR(phy->ahb_clk);
-		goto fail;
-	}
-
-	/* PLL init will call into clk_register which requires
-	 * register access, so we need to enable power and ahb clock.
-	 */
-	ret = dsi_phy_enable_resource(phy);
-	if (ret)
-		goto fail;
-
-	phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
-	if (!phy->pll)
-		dev_info(&pdev->dev,
-			"%s: pll init failed, need separate pll clk driver\n",
-			__func__);
-
-	dsi_phy_disable_resource(phy);
-
-	platform_set_drvdata(pdev, phy);
-
-	return 0;
-
-fail:
-	return ret;
-}
-
-static int dsi_phy_driver_remove(struct platform_device *pdev)
-{
-	struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
-
-	if (phy && phy->pll) {
-		msm_dsi_pll_destroy(phy->pll);
-		phy->pll = NULL;
-	}
-
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static struct platform_driver dsi_phy_platform_driver = {
-	.probe      = dsi_phy_driver_probe,
-	.remove     = dsi_phy_driver_remove,
-	.driver     = {
-		.name   = "msm_dsi_phy",
-		.of_match_table = dsi_phy_dt_match,
-	},
-};
-
-void __init msm_dsi_phy_driver_register(void)
-{
-	platform_driver_register(&dsi_phy_platform_driver);
-}
-
-void __exit msm_dsi_phy_driver_unregister(void)
-{
-	platform_driver_unregister(&dsi_phy_platform_driver);
-}
-
-int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
-	const unsigned long bit_rate, const unsigned long esc_rate)
-{
-	int ret;
-
-	if (!phy || !phy->cfg->ops.enable)
-		return -EINVAL;
-
-	ret = dsi_phy_regulator_enable(phy);
-	if (ret) {
-		dev_err(&phy->pdev->dev, "%s: regulator enable failed, %d\n",
-			__func__, ret);
-		return ret;
-	}
-
-	return phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
-}
-
-void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
-{
-	if (!phy || !phy->cfg->ops.disable)
-		return;
-
-	phy->cfg->ops.disable(phy);
-	dsi_phy_regulator_disable(phy);
-}
-
-void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
-	u32 *clk_pre, u32 *clk_post)
-{
-	if (!phy)
-		return;
-	if (clk_pre)
-		*clk_pre = phy->timing.clk_pre;
-	if (clk_post)
-		*clk_post = phy->timing.clk_post;
-}
-
-struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
-{
-	if (!phy)
-		return NULL;
-
-	return phy->pll;
-}
-
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
new file mode 100644
index 000000000000..828a94cc7f39
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -0,0 +1,448 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+
+#include "dsi_phy.h"
+
+#define S_DIV_ROUND_UP(n, d)	\
+	(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
+
+static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
+				s32 min_result, bool even)
+{
+	s32 v;
+
+	v = (tmax - tmin) * percent;
+	v = S_DIV_ROUND_UP(v, 100) + tmin;
+	if (even && (v & 0x1))
+		return max_t(s32, min_result, v - 1);
+	else
+		return max_t(s32, min_result, v);
+}
+
+static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
+					s32 ui, s32 coeff, s32 pcnt)
+{
+	s32 tmax, tmin, clk_z;
+	s32 temp;
+
+	/* reset */
+	temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	if (tmin > 255) {
+		tmax = 511;
+		clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
+	} else {
+		tmax = 255;
+		clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
+	}
+
+	/* adjust */
+	temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
+	timing->clk_zero = clk_z + 8 - temp;
+}
+
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+	const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	s32 ui, lpx;
+	s32 tmax, tmin;
+	s32 pcnt0 = 10;
+	s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
+	s32 pcnt2 = 10;
+	s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
+	s32 coeff = 1000; /* Precision, should avoid overflow */
+	s32 temp;
+
+	if (!bit_rate || !esc_rate)
+		return -EINVAL;
+
+	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
+	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
+
+	tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
+	tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
+	timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
+
+	temp = lpx / ui;
+	if (temp & 0x1)
+		timing->hs_rqst = temp;
+	else
+		timing->hs_rqst = max_t(s32, 0, temp - 2);
+
+	/* Calculate clk_zero after clk_prepare and hs_rqst */
+	dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
+	timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	temp = 85 * coeff + 6 * ui;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 40 * coeff + 4 * ui;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
+
+	tmax = 255;
+	temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
+	temp = 145 * coeff + 10 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
+
+	temp = 105 * coeff + 12 * ui - 20 * coeff;
+	tmax = S_DIV_ROUND_UP(temp, ui) - 2;
+	temp = 60 * coeff + 4 * ui;
+	tmin = DIV_ROUND_UP(temp, ui) - 2;
+	timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
+
+	tmax = 255;
+	tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
+	timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
+
+	tmax = 63;
+	temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
+	temp = 60 * coeff + 52 * ui - 24 * ui - temp;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
+
+	tmax = 63;
+	temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
+	temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
+	temp += 8 * ui + lpx;
+	tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
+	if (tmin > tmax) {
+		temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
+		timing->clk_pre = temp >> 1;
+	} else {
+		timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
+	}
+
+	timing->ta_go = 3;
+	timing->ta_sure = 0;
+	timing->ta_get = 4;
+
+	DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
+		timing->clk_pre, timing->clk_post, timing->clk_zero,
+		timing->clk_trail, timing->clk_prepare, timing->hs_exit,
+		timing->hs_zero, timing->hs_prepare, timing->hs_trail,
+		timing->hs_rqst);
+
+	return 0;
+}
+
+void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
+				u32 bit_mask)
+{
+	int phy_id = phy->id;
+	u32 val;
+
+	if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
+		return;
+
+	val = dsi_phy_read(phy->base + reg);
+
+	if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
+		dsi_phy_write(phy->base + reg, val | bit_mask);
+	else
+		dsi_phy_write(phy->base + reg, val & (~bit_mask));
+}
+
+static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int i, ret;
+
+	for (i = 0; i < num; i++)
+		s[i].supply = regs[i].name;
+
+	ret = devm_regulator_bulk_get(dev, num, s);
+	if (ret < 0) {
+		dev_err(dev, "%s: failed to init regulator, ret=%d\n",
+						__func__, ret);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
+			ret = regulator_set_voltage(s[i].consumer,
+				regs[i].min_voltage, regs[i].max_voltage);
+			if (ret < 0) {
+				dev_err(dev,
+					"regulator %d set voltage failed, %d\n",
+					i, ret);
+				return ret;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	int num = phy->cfg->reg_cfg.num;
+	int i;
+
+	DBG("");
+	for (i = num - 1; i >= 0; i--)
+		if (regs[i].disable_load >= 0)
+			regulator_set_load(s[i].consumer, regs[i].disable_load);
+
+	regulator_bulk_disable(num, s);
+}
+
+static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
+{
+	struct regulator_bulk_data *s = phy->supplies;
+	const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
+	struct device *dev = &phy->pdev->dev;
+	int num = phy->cfg->reg_cfg.num;
+	int ret, i;
+
+	DBG("");
+	for (i = 0; i < num; i++) {
+		if (regs[i].enable_load >= 0) {
+			ret = regulator_set_load(s[i].consumer,
+							regs[i].enable_load);
+			if (ret < 0) {
+				dev_err(dev,
+					"regulator %d set op mode failed, %d\n",
+					i, ret);
+				goto fail;
+			}
+		}
+	}
+
+	ret = regulator_bulk_enable(num, s);
+	if (ret < 0) {
+		dev_err(dev, "regulator enable failed, %d\n", ret);
+		goto fail;
+	}
+
+	return 0;
+
+fail:
+	for (i--; i >= 0; i--)
+		regulator_set_load(s[i].consumer, regs[i].disable_load);
+	return ret;
+}
+
+static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
+{
+	struct device *dev = &phy->pdev->dev;
+	int ret;
+
+	pm_runtime_get_sync(dev);
+
+	ret = clk_prepare_enable(phy->ahb_clk);
+	if (ret) {
+		dev_err(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
+		pm_runtime_put_sync(dev);
+	}
+
+	return ret;
+}
+
+static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
+{
+	clk_disable_unprepare(phy->ahb_clk);
+	pm_runtime_put_sync(&phy->pdev->dev);
+}
+
+static const struct of_device_id dsi_phy_dt_match[] = {
+	{ .compatible = "qcom,dsi-phy-28nm-hpm",
+	  .data = &dsi_phy_28nm_hpm_cfgs },
+	{ .compatible = "qcom,dsi-phy-28nm-lp",
+	  .data = &dsi_phy_28nm_lp_cfgs },
+	{ .compatible = "qcom,dsi-phy-20nm",
+	  .data = &dsi_phy_20nm_cfgs },
+	{}
+};
+
+static int dsi_phy_driver_probe(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy;
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
+	int ret;
+
+	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	match = of_match_node(dsi_phy_dt_match, dev->of_node);
+	if (!match)
+		return -ENODEV;
+
+	phy->cfg = match->data;
+	phy->pdev = pdev;
+
+	ret = of_property_read_u32(dev->of_node,
+				"qcom,dsi-phy-index", &phy->id);
+	if (ret) {
+		dev_err(dev, "%s: PHY index not specified, %d\n",
+			__func__, ret);
+		goto fail;
+	}
+
+	phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
+				"qcom,dsi-phy-regulator-ldo-mode");
+
+	phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
+	if (IS_ERR(phy->base)) {
+		dev_err(dev, "%s: failed to map phy base\n", __func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
+				"DSI_PHY_REG");
+	if (IS_ERR(phy->reg_base)) {
+		dev_err(dev, "%s: failed to map phy regulator base\n",
+			__func__);
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	ret = dsi_phy_regulator_init(phy);
+	if (ret) {
+		dev_err(dev, "%s: failed to init regulator\n", __func__);
+		goto fail;
+	}
+
+	phy->ahb_clk = devm_clk_get(dev, "iface_clk");
+	if (IS_ERR(phy->ahb_clk)) {
+		dev_err(dev, "%s: Unable to get ahb clk\n", __func__);
+		ret = PTR_ERR(phy->ahb_clk);
+		goto fail;
+	}
+
+	/* PLL init will call into clk_register which requires
+	 * register access, so we need to enable power and ahb clock.
+	 */
+	ret = dsi_phy_enable_resource(phy);
+	if (ret)
+		goto fail;
+
+	phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
+	if (!phy->pll)
+		dev_info(dev,
+			"%s: pll init failed, need separate pll clk driver\n",
+			__func__);
+
+	dsi_phy_disable_resource(phy);
+
+	platform_set_drvdata(pdev, phy);
+
+	return 0;
+
+fail:
+	return ret;
+}
+
+static int dsi_phy_driver_remove(struct platform_device *pdev)
+{
+	struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
+
+	if (phy && phy->pll) {
+		msm_dsi_pll_destroy(phy->pll);
+		phy->pll = NULL;
+	}
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver dsi_phy_platform_driver = {
+	.probe      = dsi_phy_driver_probe,
+	.remove     = dsi_phy_driver_remove,
+	.driver     = {
+		.name   = "msm_dsi_phy",
+		.of_match_table = dsi_phy_dt_match,
+	},
+};
+
+void __init msm_dsi_phy_driver_register(void)
+{
+	platform_driver_register(&dsi_phy_platform_driver);
+}
+
+void __exit msm_dsi_phy_driver_unregister(void)
+{
+	platform_driver_unregister(&dsi_phy_platform_driver);
+}
+
+int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+	const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct device *dev = &phy->pdev->dev;
+	int ret;
+
+	if (!phy || !phy->cfg->ops.enable)
+		return -EINVAL;
+
+	ret = dsi_phy_regulator_enable(phy);
+	if (ret) {
+		dev_err(dev, "%s: regulator enable failed, %d\n",
+			__func__, ret);
+		return ret;
+	}
+
+	ret = phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
+	if (ret) {
+		dev_err(dev, "%s: phy enable failed, %d\n", __func__, ret);
+		dsi_phy_regulator_disable(phy);
+		return ret;
+	}
+
+	return 0;
+}
+
+void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
+{
+	if (!phy || !phy->cfg->ops.disable)
+		return;
+
+	phy->cfg->ops.disable(phy);
+
+	dsi_phy_regulator_disable(phy);
+}
+
+void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
+					u32 *clk_pre, u32 *clk_post)
+{
+	if (!phy)
+		return;
+
+	if (clk_pre)
+		*clk_pre = phy->timing.clk_pre;
+	if (clk_post)
+		*clk_post = phy->timing.clk_post;
+}
+
+struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
+{
+	if (!phy)
+		return NULL;
+
+	return phy->pll;
+}
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
new file mode 100644
index 000000000000..0456b253239f
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DSI_PHY_H__
+#define __DSI_PHY_H__
+
+#include <linux/regulator/consumer.h>
+
+#include "dsi.h"
+
+#define dsi_phy_read(offset) msm_readl((offset))
+#define dsi_phy_write(offset, data) msm_writel((data), (offset))
+
+struct msm_dsi_phy_ops {
+	int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate);
+	void (*disable)(struct msm_dsi_phy *phy);
+};
+
+struct msm_dsi_phy_cfg {
+	enum msm_dsi_phy_type type;
+	struct dsi_reg_config reg_cfg;
+	struct msm_dsi_phy_ops ops;
+
+	/*
+	 * Each cell {phy_id, pll_id} of the truth table indicates
+	 * if the source PLL selection bit should be set for each PHY.
+	 * Fill default H/W values in illegal cells, eg. cell {0, 1}.
+	 */
+	bool src_pll_truthtable[DSI_MAX][DSI_MAX];
+};
+
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
+extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
+
+struct msm_dsi_dphy_timing {
+	u32 clk_pre;
+	u32 clk_post;
+	u32 clk_zero;
+	u32 clk_trail;
+	u32 clk_prepare;
+	u32 hs_exit;
+	u32 hs_zero;
+	u32 hs_prepare;
+	u32 hs_trail;
+	u32 hs_rqst;
+	u32 ta_go;
+	u32 ta_sure;
+	u32 ta_get;
+};
+
+struct msm_dsi_phy {
+	struct platform_device *pdev;
+	void __iomem *base;
+	void __iomem *reg_base;
+	int id;
+
+	struct clk *ahb_clk;
+	struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
+
+	struct msm_dsi_dphy_timing timing;
+	const struct msm_dsi_phy_cfg *cfg;
+
+	bool regulator_ldo_mode;
+
+	struct msm_dsi_pll *pll;
+};
+
+/*
+ * PHY internal functions
+ */
+int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
+	const unsigned long bit_rate, const unsigned long esc_rate);
+void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
+				u32 bit_mask);
+
+#endif /* __DSI_PHY_H__ */
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
new file mode 100644
index 000000000000..2e9ba118d50a
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_20nm.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_20nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
+		DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
+		DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
+		DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
+			DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
+		DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
+		DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
+		DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
+		DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
+		DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
+		DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
+		DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	if (phy->regulator_ldo_mode) {
+		dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
+		return;
+	}
+
+	/* non LDO mode */
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
+}
+
+static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+	u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_20nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
+				DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
+							(i >> 1) * 0x40);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
+		dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
+	}
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
+	dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
+
+	dsi_20nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
+
+	dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
+
+	/* make sure everything is written before enable */
+	wmb();
+	dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
+
+	return 0;
+}
+
+static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
+	dsi_20nm_phy_regulator_ctrl(phy, false);
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
+	.type = MSM_DSI_PHY_20NM,
+	.src_pll_truthtable = { {false, true}, {false, true} },
+	.reg_cfg = {
+		.num = 2,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+			{"vcca", 1000000, 1000000, 10000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_20nm_phy_enable,
+		.disable = dsi_20nm_phy_disable,
+	}
+};
+
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
new file mode 100644
index 000000000000..f1a7c7b46420
--- /dev/null
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "dsi_phy.h"
+#include "dsi.xml.h"
+
+static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
+		struct msm_dsi_dphy_timing *timing)
+{
+	void __iomem *base = phy->base;
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
+		DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
+		DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
+		DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
+	if (timing->clk_zero & BIT(8))
+		dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
+			DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
+		DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
+		DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
+		DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
+		DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
+		DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
+		DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
+		DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
+	dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
+		DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
+}
+
+static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
+{
+	void __iomem *base = phy->reg_base;
+
+	if (!enable) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
+		return;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
+}
+
+static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
+		const unsigned long bit_rate, const unsigned long esc_rate)
+{
+	struct msm_dsi_dphy_timing *timing = &phy->timing;
+	int i;
+	void __iomem *base = phy->base;
+
+	DBG("");
+
+	if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
+		dev_err(&phy->pdev->dev,
+			"%s: D-PHY timing calculation failed\n", __func__);
+		return -EINVAL;
+	}
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
+
+	dsi_28nm_phy_regulator_ctrl(phy, true);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
+
+	dsi_28nm_dphy_set_timing(phy, timing);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
+
+	for (i = 0; i < 4; i++) {
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
+		dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
+	}
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
+	dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
+
+	dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
+
+	msm_dsi_phy_set_src_pll(phy, src_pll_id,
+				REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
+				DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
+
+	return 0;
+}
+
+static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
+{
+	dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
+	dsi_28nm_phy_regulator_ctrl(phy, false);
+
+	/*
+	 * Wait for the registers writes to complete in order to
+	 * ensure that the phy is completely disabled
+	 */
+	wmb();
+}
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
+	.type = MSM_DSI_PHY_28NM_HPM,
+	.src_pll_truthtable = { {true, true}, {false, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
+
+const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
+	.type = MSM_DSI_PHY_28NM_LP,
+	.src_pll_truthtable = { {true, true}, {true, true} },
+	.reg_cfg = {
+		.num = 1,
+		.regs = {
+			{"vddio", 1800000, 1800000, 100000, 100},
+		},
+	},
+	.ops = {
+		.enable = dsi_28nm_phy_enable,
+		.disable = dsi_28nm_phy_disable,
+	},
+};
+