drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 358 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
new file mode 100644
index 000000000000..42f1b228d342
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h
@@ -0,0 +1,358 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DPU_HW_UTIL_H
+#define _DPU_HW_UTIL_H
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include "dpu_hw_mdss.h"
+
+#define REG_MASK(n)                     ((BIT(n)) - 1)
+struct dpu_format_extended;
+
+/*
+ * This is the common struct maintained by each sub block
+ * for mapping the register offsets in this block to the
+ * absoulute IO address
+ * @base_off:     mdp register mapped offset
+ * @blk_off:      pipe offset relative to mdss offset
+ * @length        length of register block offset
+ * @xin_id        xin id
+ * @hwversion     mdss hw version number
+ */
+struct dpu_hw_blk_reg_map {
+	void __iomem *base_off;
+	u32 blk_off;
+	u32 length;
+	u32 xin_id;
+	u32 hwversion;
+	u32 log_mask;
+};
+
+/**
+ * struct dpu_hw_scaler3_de_cfg : QSEEDv3 detail enhancer configuration
+ * @enable:         detail enhancer enable/disable
+ * @sharpen_level1: sharpening strength for noise
+ * @sharpen_level2: sharpening strength for signal
+ * @ clip:          clip shift
+ * @ limit:         limit value
+ * @ thr_quiet:     quiet threshold
+ * @ thr_dieout:    dieout threshold
+ * @ thr_high:      low threshold
+ * @ thr_high:      high threshold
+ * @ prec_shift:    precision shift
+ * @ adjust_a:      A-coefficients for mapping curve
+ * @ adjust_b:      B-coefficients for mapping curve
+ * @ adjust_c:      C-coefficients for mapping curve
+ */
+struct dpu_hw_scaler3_de_cfg {
+	u32 enable;
+	int16_t sharpen_level1;
+	int16_t sharpen_level2;
+	uint16_t clip;
+	uint16_t limit;
+	uint16_t thr_quiet;
+	uint16_t thr_dieout;
+	uint16_t thr_low;
+	uint16_t thr_high;
+	uint16_t prec_shift;
+	int16_t adjust_a[DPU_MAX_DE_CURVES];
+	int16_t adjust_b[DPU_MAX_DE_CURVES];
+	int16_t adjust_c[DPU_MAX_DE_CURVES];
+};
+
+
+/**
+ * struct dpu_hw_scaler3_cfg : QSEEDv3 configuration
+ * @enable:        scaler enable
+ * @dir_en:        direction detection block enable
+ * @ init_phase_x: horizontal initial phase
+ * @ phase_step_x: horizontal phase step
+ * @ init_phase_y: vertical initial phase
+ * @ phase_step_y: vertical phase step
+ * @ preload_x:    horizontal preload value
+ * @ preload_y:    vertical preload value
+ * @ src_width:    source width
+ * @ src_height:   source height
+ * @ dst_width:    destination width
+ * @ dst_height:   destination height
+ * @ y_rgb_filter_cfg: y/rgb plane filter configuration
+ * @ uv_filter_cfg: uv plane filter configuration
+ * @ alpha_filter_cfg: alpha filter configuration
+ * @ blend_cfg:    blend coefficients configuration
+ * @ lut_flag:     scaler LUT update flags
+ *                 0x1 swap LUT bank
+ *                 0x2 update 2D filter LUT
+ *                 0x4 update y circular filter LUT
+ *                 0x8 update uv circular filter LUT
+ *                 0x10 update y separable filter LUT
+ *                 0x20 update uv separable filter LUT
+ * @ dir_lut_idx:  2D filter LUT index
+ * @ y_rgb_cir_lut_idx: y circular filter LUT index
+ * @ uv_cir_lut_idx: uv circular filter LUT index
+ * @ y_rgb_sep_lut_idx: y circular filter LUT index
+ * @ uv_sep_lut_idx: uv separable filter LUT index
+ * @ dir_lut:      pointer to 2D LUT
+ * @ cir_lut:      pointer to circular filter LUT
+ * @ sep_lut:      pointer to separable filter LUT
+ * @ de: detail enhancer configuration
+ */
+struct dpu_hw_scaler3_cfg {
+	u32 enable;
+	u32 dir_en;
+	int32_t init_phase_x[DPU_MAX_PLANES];
+	int32_t phase_step_x[DPU_MAX_PLANES];
+	int32_t init_phase_y[DPU_MAX_PLANES];
+	int32_t phase_step_y[DPU_MAX_PLANES];
+
+	u32 preload_x[DPU_MAX_PLANES];
+	u32 preload_y[DPU_MAX_PLANES];
+	u32 src_width[DPU_MAX_PLANES];
+	u32 src_height[DPU_MAX_PLANES];
+
+	u32 dst_width;
+	u32 dst_height;
+
+	u32 y_rgb_filter_cfg;
+	u32 uv_filter_cfg;
+	u32 alpha_filter_cfg;
+	u32 blend_cfg;
+
+	u32 lut_flag;
+	u32 dir_lut_idx;
+
+	u32 y_rgb_cir_lut_idx;
+	u32 uv_cir_lut_idx;
+	u32 y_rgb_sep_lut_idx;
+	u32 uv_sep_lut_idx;
+	u32 *dir_lut;
+	size_t dir_len;
+	u32 *cir_lut;
+	size_t cir_len;
+	u32 *sep_lut;
+	size_t sep_len;
+
+	/*
+	 * Detail enhancer settings
+	 */
+	struct dpu_hw_scaler3_de_cfg de;
+};
+
+struct dpu_hw_scaler3_lut_cfg {
+	bool is_configured;
+	u32 *dir_lut;
+	size_t dir_len;
+	u32 *cir_lut;
+	size_t cir_len;
+	u32 *sep_lut;
+	size_t sep_len;
+};
+
+/**
+ * struct dpu_drm_pix_ext_v1 - version 1 of pixel ext structure
+ * @num_ext_pxls_lr: Number of total horizontal pixels
+ * @num_ext_pxls_tb: Number of total vertical lines
+ * @left_ftch:       Number of extra pixels to overfetch from left
+ * @right_ftch:      Number of extra pixels to overfetch from right
+ * @top_ftch:        Number of extra lines to overfetch from top
+ * @btm_ftch:        Number of extra lines to overfetch from bottom
+ * @left_rpt:        Number of extra pixels to repeat from left
+ * @right_rpt:       Number of extra pixels to repeat from right
+ * @top_rpt:         Number of extra lines to repeat from top
+ * @btm_rpt:         Number of extra lines to repeat from bottom
+ */
+struct dpu_drm_pix_ext_v1 {
+	/*
+	 * Number of pixels ext in left, right, top and bottom direction
+	 * for all color components.
+	 */
+	int32_t num_ext_pxls_lr[DPU_MAX_PLANES];
+	int32_t num_ext_pxls_tb[DPU_MAX_PLANES];
+
+	/*
+	 * Number of pixels needs to be overfetched in left, right, top
+	 * and bottom directions from source image for scaling.
+	 */
+	int32_t left_ftch[DPU_MAX_PLANES];
+	int32_t right_ftch[DPU_MAX_PLANES];
+	int32_t top_ftch[DPU_MAX_PLANES];
+	int32_t btm_ftch[DPU_MAX_PLANES];
+	/*
+	 * Number of pixels needs to be repeated in left, right, top and
+	 * bottom directions for scaling.
+	 */
+	int32_t left_rpt[DPU_MAX_PLANES];
+	int32_t right_rpt[DPU_MAX_PLANES];
+	int32_t top_rpt[DPU_MAX_PLANES];
+	int32_t btm_rpt[DPU_MAX_PLANES];
+
+};
+
+/**
+ * struct dpu_drm_de_v1 - version 1 of detail enhancer structure
+ * @enable:         Enables/disables detail enhancer
+ * @sharpen_level1: Sharpening strength for noise
+ * @sharpen_level2: Sharpening strength for context
+ * @clip:           Clip coefficient
+ * @limit:          Detail enhancer limit factor
+ * @thr_quiet:      Quite zone threshold
+ * @thr_dieout:     Die-out zone threshold
+ * @thr_low:        Linear zone left threshold
+ * @thr_high:       Linear zone right threshold
+ * @prec_shift:     Detail enhancer precision
+ * @adjust_a:       Mapping curves A coefficients
+ * @adjust_b:       Mapping curves B coefficients
+ * @adjust_c:       Mapping curves C coefficients
+ */
+struct dpu_drm_de_v1 {
+	uint32_t enable;
+	int16_t sharpen_level1;
+	int16_t sharpen_level2;
+	uint16_t clip;
+	uint16_t limit;
+	uint16_t thr_quiet;
+	uint16_t thr_dieout;
+	uint16_t thr_low;
+	uint16_t thr_high;
+	uint16_t prec_shift;
+	int16_t adjust_a[DPU_MAX_DE_CURVES];
+	int16_t adjust_b[DPU_MAX_DE_CURVES];
+	int16_t adjust_c[DPU_MAX_DE_CURVES];
+};
+
+/**
+ * struct dpu_drm_scaler_v2 - version 2 of struct dpu_drm_scaler
+ * @enable:            Scaler enable
+ * @dir_en:            Detail enhancer enable
+ * @pe:                Pixel extension settings
+ * @horz_decimate:     Horizontal decimation factor
+ * @vert_decimate:     Vertical decimation factor
+ * @init_phase_x:      Initial scaler phase values for x
+ * @phase_step_x:      Phase step values for x
+ * @init_phase_y:      Initial scaler phase values for y
+ * @phase_step_y:      Phase step values for y
+ * @preload_x:         Horizontal preload value
+ * @preload_y:         Vertical preload value
+ * @src_width:         Source width
+ * @src_height:        Source height
+ * @dst_width:         Destination width
+ * @dst_height:        Destination height
+ * @y_rgb_filter_cfg:  Y/RGB plane filter configuration
+ * @uv_filter_cfg:     UV plane filter configuration
+ * @alpha_filter_cfg:  Alpha filter configuration
+ * @blend_cfg:         Selection of blend coefficients
+ * @lut_flag:          LUT configuration flags
+ * @dir_lut_idx:       2d 4x4 LUT index
+ * @y_rgb_cir_lut_idx: Y/RGB circular LUT index
+ * @uv_cir_lut_idx:    UV circular LUT index
+ * @y_rgb_sep_lut_idx: Y/RGB separable LUT index
+ * @uv_sep_lut_idx:    UV separable LUT index
+ * @de:                Detail enhancer settings
+ */
+struct dpu_drm_scaler_v2 {
+	/*
+	 * General definitions
+	 */
+	uint32_t enable;
+	uint32_t dir_en;
+
+	/*
+	 * Pix ext settings
+	 */
+	struct dpu_drm_pix_ext_v1 pe;
+
+	/*
+	 * Decimation settings
+	 */
+	uint32_t horz_decimate;
+	uint32_t vert_decimate;
+
+	/*
+	 * Phase settings
+	 */
+	int32_t init_phase_x[DPU_MAX_PLANES];
+	int32_t phase_step_x[DPU_MAX_PLANES];
+	int32_t init_phase_y[DPU_MAX_PLANES];
+	int32_t phase_step_y[DPU_MAX_PLANES];
+
+	uint32_t preload_x[DPU_MAX_PLANES];
+	uint32_t preload_y[DPU_MAX_PLANES];
+	uint32_t src_width[DPU_MAX_PLANES];
+	uint32_t src_height[DPU_MAX_PLANES];
+
+	uint32_t dst_width;
+	uint32_t dst_height;
+
+	uint32_t y_rgb_filter_cfg;
+	uint32_t uv_filter_cfg;
+	uint32_t alpha_filter_cfg;
+	uint32_t blend_cfg;
+
+	uint32_t lut_flag;
+	uint32_t dir_lut_idx;
+
+	/* for Y(RGB) and UV planes*/
+	uint32_t y_rgb_cir_lut_idx;
+	uint32_t uv_cir_lut_idx;
+	uint32_t y_rgb_sep_lut_idx;
+	uint32_t uv_sep_lut_idx;
+
+	/*
+	 * Detail enhancer settings
+	 */
+	struct dpu_drm_de_v1 de;
+};
+
+
+u32 *dpu_hw_util_get_log_mask_ptr(void);
+
+void dpu_reg_write(struct dpu_hw_blk_reg_map *c,
+		u32 reg_off,
+		u32 val,
+		const char *name);
+int dpu_reg_read(struct dpu_hw_blk_reg_map *c, u32 reg_off);
+
+#define DPU_REG_WRITE(c, off, val) dpu_reg_write(c, off, val, #off)
+#define DPU_REG_READ(c, off) dpu_reg_read(c, off)
+
+#define MISR_FRAME_COUNT_MASK		0xFF
+#define MISR_CTRL_ENABLE		BIT(8)
+#define MISR_CTRL_STATUS		BIT(9)
+#define MISR_CTRL_STATUS_CLEAR		BIT(10)
+#define INTF_MISR_CTRL_FREE_RUN_MASK	BIT(31)
+
+void *dpu_hw_util_get_dir(void);
+
+void dpu_set_scaler_v2(struct dpu_hw_scaler3_cfg *cfg,
+		const struct dpu_drm_scaler_v2 *scale_v2);
+
+void dpu_hw_setup_scaler3(struct dpu_hw_blk_reg_map *c,
+		struct dpu_hw_scaler3_cfg *scaler3_cfg,
+		u32 scaler_offset, u32 scaler_version,
+		const struct dpu_format *format);
+
+u32 dpu_hw_get_scaler3_ver(struct dpu_hw_blk_reg_map *c,
+		u32 scaler_offset);
+
+void dpu_hw_csc_setup(struct dpu_hw_blk_reg_map  *c,
+		u32 csc_reg_off,
+		struct dpu_csc_cfg *data, bool csc10);
+
+uint32_t dpu_copy_formats(
+		struct dpu_format_extended *dst_list,
+		uint32_t dst_list_size,
+		uint32_t dst_list_pos,
+		const struct dpu_format_extended *src_list,
+		uint32_t src_list_size);
+
+#endif /* _DPU_HW_UTIL_H */