drm/i915: expose command stream timestamp frequency to userspace

We use to have this fixed per generation, but starting with CNL userspace
cannot tell just off the PCI ID. Let's make this information available. This
is particularly useful for performance monitoring where much of the
normalization work is done using those timestamps (this include pipeline
statistics in both GL & Vulkan as well as OA reports).

v2: Use variables for 24MHz/19.2MHz values (Ewelina)
    Renamed function & coding style (Sagar)

v3: Fix frequency read on Broadwell (Sagar)
    Fix missing divide by 4 on <= gen4 (Sagar)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171110190845.32574-7-lionel.g.landwerlin@intel.com

1 files changed, 107 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c
index db03d179fc85..78bf7374fbdd 100644
--- a/drivers/gpu/drm/i915/intel_device_info.c
+++ b/drivers/gpu/drm/i915/intel_device_info.c
@@ -329,6 +329,108 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
 	sseu->has_eu_pg = 0;
 }
 
+static u64 read_reference_ts_freq(struct drm_i915_private *dev_priv)
+{
+	u32 ts_override = I915_READ(GEN9_TIMESTAMP_OVERRIDE);
+	u64 base_freq, frac_freq;
+
+	base_freq = ((ts_override & GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK) >>
+		     GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_SHIFT) + 1;
+	base_freq *= 1000000;
+
+	frac_freq = ((ts_override &
+		      GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK) >>
+		     GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_SHIFT);
+	if (frac_freq != 0)
+		frac_freq = 1000000 / (frac_freq + 1);
+
+	return base_freq + frac_freq;
+}
+
+static u64 read_timestamp_frequency(struct drm_i915_private *dev_priv)
+{
+	u64 f12_5_mhz = 12500000;
+	u64 f19_2_mhz = 19200000;
+	u64 f24_mhz = 24000000;
+
+	if (INTEL_GEN(dev_priv) <= 4) {
+		/* PRMs say:
+		 *
+		 *     "The value in this register increments once every 16
+		 *      hclks." (through the “Clocking Configuration”
+		 *      (“CLKCFG”) MCHBAR register)
+		 */
+		return (dev_priv->rawclk_freq * 1000) / 16;
+	} else if (INTEL_GEN(dev_priv) <= 8) {
+		/* PRMs say:
+		 *
+		 *     "The PCU TSC counts 10ns increments; this timestamp
+		 *      reflects bits 38:3 of the TSC (i.e. 80ns granularity,
+		 *      rolling over every 1.5 hours).
+		 */
+		return f12_5_mhz;
+	} else if (INTEL_GEN(dev_priv) <= 9) {
+		u32 ctc_reg = I915_READ(CTC_MODE);
+		u64 freq = 0;
+
+		if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+			freq = read_reference_ts_freq(dev_priv);
+		} else {
+			freq = IS_GEN9_LP(dev_priv) ? f19_2_mhz : f24_mhz;
+
+			/* Now figure out how the command stream's timestamp
+			 * register increments from this frequency (it might
+			 * increment only every few clock cycle).
+			 */
+			freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
+				      CTC_SHIFT_PARAMETER_SHIFT);
+		}
+
+		return freq;
+	} else if (INTEL_GEN(dev_priv) <= 10) {
+		u32 ctc_reg = I915_READ(CTC_MODE);
+		u64 freq = 0;
+		u32 rpm_config_reg = 0;
+
+		/* First figure out the reference frequency. There are 2 ways
+		 * we can compute the frequency, either through the
+		 * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
+		 * tells us which one we should use.
+		 */
+		if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+			freq = read_reference_ts_freq(dev_priv);
+		} else {
+			u32 crystal_clock;
+
+			rpm_config_reg = I915_READ(RPM_CONFIG0);
+			crystal_clock = (rpm_config_reg &
+					 GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
+				GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
+			switch (crystal_clock) {
+			case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
+				freq = f19_2_mhz;
+				break;
+			case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
+				freq = f24_mhz;
+				break;
+			}
+		}
+
+		/* Now figure out how the command stream's timestamp register
+		 * increments from this frequency (it might increment only
+		 * every few clock cycle).
+		 */
+		freq >>= 3 - ((rpm_config_reg &
+			       GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
+			      GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
+
+		return freq;
+	}
+
+	DRM_ERROR("Unknown gen, unable to compute command stream timestamp frequency\n");
+	return 0;
+}
+
 /*
  * Determine various intel_device_info fields at runtime.
  *
@@ -450,6 +552,9 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 	else if (INTEL_GEN(dev_priv) >= 10)
 		gen10_sseu_info_init(dev_priv);
 
+	/* Initialize command stream timestamp frequency */
+	info->cs_timestamp_frequency = read_timestamp_frequency(dev_priv);
+
 	DRM_DEBUG_DRIVER("slice mask: %04x\n", info->sseu.slice_mask);
 	DRM_DEBUG_DRIVER("slice total: %u\n", hweight8(info->sseu.slice_mask));
 	DRM_DEBUG_DRIVER("subslice total: %u\n",
@@ -465,4 +570,6 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
 			 info->sseu.has_subslice_pg ? "y" : "n");
 	DRM_DEBUG_DRIVER("has EU power gating: %s\n",
 			 info->sseu.has_eu_pg ? "y" : "n");
+	DRM_DEBUG_DRIVER("CS timestamp frequency: %llu\n",
+			 info->cs_timestamp_frequency);
 }