diff options
author | Thierry Reding <treding@nvidia.com> | 2013-12-09 11:47:55 +0100 |
---|---|---|
committer | Thierry Reding <treding@nvidia.com> | 2014-02-26 17:21:34 +0100 |
commit | 516c0f7c0a608833cc01d3f5b2a357ee806b78a1 (patch) | |
tree | 2ba87f3b5c08202f106c753cf138b2eba991a126 /drivers/gpu/drm/drm_dp_helper.c | |
parent | 8d4adc6a5807ca51999421b4d6d4f193c95775ba (diff) | |
download | linux-516c0f7c0a608833cc01d3f5b2a357ee806b78a1.tar.bz2 |
drm/dp: Add DisplayPort link helpers
Add a helper to probe a DP link (read out the supported DPCD revision,
maximum rate, link count and capabilities) as well as power up the DP
link and configure it accordingly.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
Changes in v5:
- export helpers
Changes in v4:
- fix a couple of typos in comments as pointed out by Alex Deucher
Changes in v3:
- split into drm_dp_link_power_up() and drm_dp_link_configure()
- do not change sink state for DPCD versions earlier than 1.1
- sleep for 1-2 ms after setting local sink to D0 state
- read and write consecutive registers where possible
- read DPCD revision when link is probed
- remove duplicate kerneldoc
Diffstat (limited to 'drivers/gpu/drm/drm_dp_helper.c')
-rw-r--r-- | drivers/gpu/drm/drm_dp_helper.c | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 84262ed64ce7..177ac7bd1851 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -472,3 +472,100 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, DP_LINK_STATUS_SIZE); } EXPORT_SYMBOL(drm_dp_dpcd_read_link_status); + +/** + * drm_dp_link_probe() - probe a DisplayPort link for capabilities + * @aux: DisplayPort AUX channel + * @link: pointer to structure in which to return link capabilities + * + * The structure filled in by this function can usually be passed directly + * into drm_dp_link_power_up() and drm_dp_link_configure() to power up and + * configure the link based on the link's capabilities. + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 values[3]; + int err; + + memset(link, 0, sizeof(*link)); + + err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values)); + if (err < 0) + return err; + + link->revision = values[0]; + link->rate = drm_dp_bw_code_to_link_rate(values[1]); + link->num_lanes = values[2] & DP_MAX_LANE_COUNT_MASK; + + if (values[2] & DP_ENHANCED_FRAME_CAP) + link->capabilities |= DP_LINK_CAP_ENHANCED_FRAMING; + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_probe); + +/** + * drm_dp_link_power_up() - power up a DisplayPort link + * @aux: DisplayPort AUX channel + * @link: pointer to a structure containing the link configuration + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_power_up(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 value; + int err; + + /* DP_SET_POWER register is only available on DPCD v1.1 and later */ + if (link->revision < 0x11) + return 0; + + err = drm_dp_dpcd_readb(aux, DP_SET_POWER, &value); + if (err < 0) + return err; + + value &= ~DP_SET_POWER_MASK; + value |= DP_SET_POWER_D0; + + err = drm_dp_dpcd_writeb(aux, DP_SET_POWER, value); + if (err < 0) + return err; + + /* + * According to the DP 1.1 specification, a "Sink Device must exit the + * power saving state within 1 ms" (Section 2.5.3.1, Table 5-52, "Sink + * Control Field" (register 0x600). + */ + usleep_range(1000, 2000); + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_power_up); + +/** + * drm_dp_link_configure() - configure a DisplayPort link + * @aux: DisplayPort AUX channel + * @link: pointer to a structure containing the link configuration + * + * Returns 0 on success or a negative error code on failure. + */ +int drm_dp_link_configure(struct drm_dp_aux *aux, struct drm_dp_link *link) +{ + u8 values[2]; + int err; + + values[0] = drm_dp_link_rate_to_bw_code(link->rate); + values[1] = link->num_lanes; + + if (link->capabilities & DP_LINK_CAP_ENHANCED_FRAMING) + values[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + + err = drm_dp_dpcd_write(aux, DP_LINK_BW_SET, values, sizeof(values)); + if (err < 0) + return err; + + return 0; +} +EXPORT_SYMBOL(drm_dp_link_configure); |