Merge tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.19.

  Rob has some new hardware support for new qualcomm hw that I'll send
  along separately. This has the display part of it, the remaining pull
  is for the acceleration engine.

  This also contains a wound-wait/wait-die mutex rework, Peter has acked
  it for merging via my tree.

  Otherwise mostly the usual level of activity. Summary:

  core:
   - Wound-wait/wait-die mutex rework
   - Add writeback connector type
   - Add "content type" property for HDMI
   - Move GEM bo to drm_framebuffer
   - Initial gpu scheduler documentation
   - GPU scheduler fixes for dying processes
   - Console deferred fbcon takeover support
   - Displayport support for CEC tunneling over AUX

  panel:
   - otm8009a panel driver fixes
   - Innolux TV123WAM and G070Y2-L01 panel driver
   - Ilitek ILI9881c panel driver
   - Rocktech RK070ER9427 LCD
   - EDT ETM0700G0EDH6 and EDT ETM0700G0BDH6
   - DLC DLC0700YZG-1
   - BOE HV070WSA-100
   - newhaven, nhd-4.3-480272ef-atxl LCD
   - DataImage SCF0700C48GGU18
   - Sharp LQ035Q7DB03
   - p079zca: Refactor to support multiple panels

  tinydrm:
   - ILI9341 display panel

  New driver:
   - vkms - virtual kms driver to testing.

  i915:
   - Icelake:
        Display enablement
        DSI support
        IRQ support
        Powerwell support
   - GPU reset fixes and improvements
   - Full ppgtt support refactoring
   - PSR fixes and improvements
   - Execlist improvments
   - GuC related fixes

  amdgpu:
   - Initial amdgpu documentation
   - JPEG engine support on VCN
   - CIK uses powerplay by default
   - Move to using core PCIE functionality for gens/lanes
   - DC/Powerplay interface rework
   - Stutter mode support for RV
   - Vega12 Powerplay updates
   - GFXOFF fixes
   - GPUVM fault debugging
   - Vega12 GFXOFF
   - DC improvements
   - DC i2c/aux changes
   - UVD 7.2 fixes
   - Powerplay fixes for Polaris12, CZ/ST
   - command submission bo_list fixes

  amdkfd:
   - Raven support
   - Power management fixes

  udl:
   - Cleanups and fixes

  nouveau:
   - misc fixes and cleanups.

  msm:
   - DPU1 support display controller in sdm845
   - GPU coredump support.

  vmwgfx:
   - Atomic modesetting validation fixes
   - Support for multisample surfaces

  armada:
   - Atomic modesetting support completed.

  exynos:
   - IPPv2 fixes
   - Move g2d to component framework
   - Suspend/resume support cleanups
   - Driver cleanups

  imx:
   - CSI configuration improvements
   - Driver cleanups
   - Use atomic suspend/resume helpers
   - ipu-v3 V4L2 XRGB32/XBGR32 support

  pl111:
   - Add Nomadik LCDC variant

  v3d:
   - GPU scheduler jobs management

  sun4i:
   - R40 display engine support
   - TCON TOP driver

  mediatek:
   - MT2712 SoC support

  rockchip:
   - vop fixes

  omapdrm:
   - Workaround for DRA7 errata i932
   - Fix mm_list locking

  mali-dp:
   - Writeback implementation
        PM improvements
   - Internal error reporting debugfs

  tilcdc:
   - Single fix for deferred probing

  hdlcd:
   - Teardown fixes

  tda998x:
   - Converted to a bridge driver.

  etnaviv:
   - Misc fixes"

* tag 'drm-next-2018-08-15' of git://anongit.freedesktop.org/drm/drm: (1506 commits)
  drm/amdgpu/sriov: give 8s for recover vram under RUNTIME
  drm/scheduler: fix param documentation
  drm/i2c: tda998x: correct PLL divider calculation
  drm/i2c: tda998x: get rid of private fill_modes function
  drm/i2c: tda998x: move mode_valid() to bridge
  drm/i2c: tda998x: register bridge outside of component helper
  drm/i2c: tda998x: cleanup from previous changes
  drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()
  drm/i2c: tda998x: convert to bridge driver
  drm/scheduler: fix timeout worker setup for out of order job completions
  drm/amd/display: display connected to dp-1 does not light up
  drm/amd/display: update clk for various HDMI color depths
  drm/amd/display: program display clock on cache match
  drm/amd/display: Add NULL check for enabling dp ss
  drm/amd/display: add vbios table check for enabling dp ss
  drm/amd/display: Don't share clk source between DP and HDMI
  drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo
  drm/amd/display: Use calculated disp_clk_khz value for dce110
  drm/amd/display: Implement custom degamma lut on dcn
  drm/amd/display: Destroy aux_engines only once
  ...

1 files changed, 33 insertions, 7 deletions

diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h
index b5dd6c73ec9f..ad2e96915d44 100644
--- a/drivers/gpu/drm/arm/malidp_hw.h
+++ b/drivers/gpu/drm/arm/malidp_hw.h
@@ -33,6 +33,7 @@ enum {
 	DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
 	DE_VIDEO2 = BIT(3),
 	DE_SMART = BIT(4),
+	SE_MEMWRITE = BIT(5),
 };
 
 struct malidp_format_id {
@@ -52,6 +53,7 @@ struct malidp_format_id {
 struct malidp_irq_map {
 	u32 irq_mask;		/* mask of IRQs that can be enabled in the block */
 	u32 vsync_irq;		/* IRQ bit used for signaling during VSYNC */
+	u32 err_mask;		/* mask of bits that represent errors */
 };
 
 struct malidp_layer {
@@ -151,12 +153,13 @@ struct malidp_hw {
 	bool (*in_config_mode)(struct malidp_hw_device *hwdev);
 
 	/*
-	 * Set configuration valid flag for hardware parameters that can
-	 * be changed outside the configuration mode. Hardware will use
-	 * the new settings when config valid is set after the end of the
-	 * current buffer scanout
+	 * Set/clear configuration valid flag for hardware parameters that can
+	 * be changed outside the configuration mode to the given value.
+	 * Hardware will use the new settings when config valid is set,
+	 * after the end of the current buffer scanout, and will ignore
+	 * any new values for those parameters if config valid flag is cleared
 	 */
-	void (*set_config_valid)(struct malidp_hw_device *hwdev);
+	void (*set_config_valid)(struct malidp_hw_device *hwdev, u8 value);
 
 	/*
 	 * Set a new mode in hardware. Requires the hardware to be in
@@ -177,6 +180,23 @@ struct malidp_hw {
 	long (*se_calc_mclk)(struct malidp_hw_device *hwdev,
 			     struct malidp_se_config *se_config,
 			     struct videomode *vm);
+	/*
+	 * Enable writing to memory the content of the next frame
+	 * @param hwdev - malidp_hw_device structure containing the HW description
+	 * @param addrs - array of addresses for each plane
+	 * @param pitches - array of pitches for each plane
+	 * @param num_planes - number of planes to be written
+	 * @param w - width of the output frame
+	 * @param h - height of the output frame
+	 * @param fmt_id - internal format ID of output buffer
+	 */
+	int (*enable_memwrite)(struct malidp_hw_device *hwdev, dma_addr_t *addrs,
+			       s32 *pitches, int num_planes, u16 w, u16 h, u32 fmt_id);
+
+	/*
+	 * Disable the writing to memory of the next frame's content.
+	 */
+	void (*disable_memwrite)(struct malidp_hw_device *hwdev);
 
 	u8 features;
 };
@@ -210,10 +230,14 @@ struct malidp_hw_device {
 
 	u8 min_line_size;
 	u16 max_line_size;
+	u32 output_color_depth;
 
 	/* track the device PM state */
 	bool pm_suspended;
 
+	/* track the SE memory writeback state */
+	u8 mw_state;
+
 	/* size of memory used for rotating layers, up to two banks available */
 	u32 rotation_memory[2];
 };
@@ -279,9 +303,11 @@ static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
 }
 
 int malidp_de_irq_init(struct drm_device *drm, int irq);
-void malidp_de_irq_fini(struct drm_device *drm);
+void malidp_se_irq_hw_init(struct malidp_hw_device *hwdev);
+void malidp_de_irq_hw_init(struct malidp_hw_device *hwdev);
+void malidp_de_irq_fini(struct malidp_hw_device *hwdev);
 int malidp_se_irq_init(struct drm_device *drm, int irq);
-void malidp_se_irq_fini(struct drm_device *drm);
+void malidp_se_irq_fini(struct malidp_hw_device *hwdev);
 
 u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
 			   u8 layer_id, u32 format);