summaryrefslogtreecommitdiffstats
path: root/drivers/gpio
diff options
context:
space:
mode:
authorHaojian Zhuang <haojian.zhuang@marvell.com>2011-10-17 20:37:52 +0800
committerHaojian Zhuang <hzhuang1@hexinfolabs.org>2011-11-15 19:08:27 +0800
commit157d2644cb0c1e71a18baaffca56d2b1d0ebf10f (patch)
treee33d224362ce8ac0706725f02ecd8b89c3645934 /drivers/gpio
parent9bf448c66d4b4cb03813b39195d408701ecf1fab (diff)
downloadlinux-157d2644cb0c1e71a18baaffca56d2b1d0ebf10f.tar.bz2
ARM: pxa: change gpio to platform device
Remove most gpio macros and change gpio driver to platform driver. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile2
-rw-r--r--drivers/gpio/gpio-pxa.c135
3 files changed, 132 insertions, 11 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23887dc..aa0b94ff36d0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -141,6 +141,12 @@ config GPIO_PL061
help
Say yes here to support the PrimeCell PL061 GPIO device
+config GPIO_PXA
+ bool "PXA GPIO support"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Say yes here to support the PXA GPIO device
+
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index dbcb0bcfd8da..5b2b9e26f49c 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
-obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 31d2da4100cd..079f97fde2c7 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -12,13 +12,42 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio-pxa.h>
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+#define GAFR_OFFSET 0x54
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
@@ -52,6 +81,7 @@ enum {
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
static int gpio_type;
+static void __iomem *gpio_reg_base;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -76,6 +106,53 @@ static inline int gpio_is_mmp_type(int type)
return (type & MMP_GPIO) != 0;
}
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+ if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+ return 1;
+ return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ struct pxa_gpio_chip *pxachip;
+ void __iomem *base;
+ unsigned long gafr = 0, gpdr = 0;
+ int ret, af = 0, dir = 0;
+
+ pxachip = gpio_to_pxachip(gpio);
+ base = gpio_chip_base(&pxachip->chip);
+ gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+ switch (gpio_type) {
+ case PXA25X_GPIO:
+ case PXA26X_GPIO:
+ case PXA27X_GPIO:
+ gafr = readl_relaxed(base + GAFR_OFFSET);
+ af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+ dir = gpdr & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ ret = (af != 1) || (dir == 0);
+ else
+ ret = (af != 0) || (dir != 0);
+ break;
+ default:
+ ret = gpdr & GPIO_bit(gpio);
+ break;
+ }
+ return ret;
+}
+
#ifdef CONFIG_ARCH_PXA
static inline int __pxa_gpio_to_irq(int gpio)
{
@@ -187,7 +264,7 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
-static int __init pxa_init_gpio_chip(int gpio_end)
+static int __devinit pxa_init_gpio_chip(int gpio_end)
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
@@ -202,7 +279,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = GPIO_BANK(i);
+ chips[i].regbase = gpio_reg_base + BANK_OFF(i);
c->base = gpio;
c->label = chips[i].label;
@@ -384,17 +461,35 @@ static int pxa_gpio_nums(void)
return count;
}
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+static int __devinit pxa_gpio_probe(struct platform_device *pdev)
{
struct pxa_gpio_chip *c;
+ struct resource *res;
int gpio, irq;
+ int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
pxa_last_gpio = pxa_gpio_nums();
if (!pxa_last_gpio)
- return;
+ return -EINVAL;
+
+ irq0 = platform_get_irq_byname(pdev, "gpio0");
+ irq1 = platform_get_irq_byname(pdev, "gpio1");
+ irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+ if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+ || (irq_mux <= 0))
+ return -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ gpio_reg_base = ioremap(res->start, resource_size(res));
+ if (!gpio_reg_base)
+ return -EINVAL;
+
+ if (irq0 > 0)
+ gpio_offset = 2;
/* Initialize GPIO chips */
- pxa_init_gpio_chip(end);
+ pxa_init_gpio_chip(pxa_last_gpio);
/* clear all GPIO edge detects */
for_each_gpio_chip(gpio, c) {
@@ -417,16 +512,29 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
#endif
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ for (irq = gpio_to_irq(gpio_offset);
+ irq <= gpio_to_irq(pxa_last_gpio); irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- /* Install handler for GPIO>=2 edge detect interrupts */
- irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
- pxa_muxed_gpio_chip.irq_set_wake = fn;
+ irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
+ return 0;
+}
+
+static struct platform_driver pxa_gpio_driver = {
+ .probe = pxa_gpio_probe,
+ .driver = {
+ .name = "pxa-gpio",
+ },
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return platform_driver_register(&pxa_gpio_driver);
}
+postcore_initcall(pxa_gpio_init);
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)
@@ -470,3 +578,10 @@ struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
+
+static int __init pxa_gpio_sysinit(void)
+{
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);