diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2016-11-23 23:21:17 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2016-11-24 16:19:01 +0100 |
| commit | 1516c6350aa2770b8a5e36d40c3ec5078f92ba70 (patch) | |
| tree | fc782de26da3c3cd8ef8e0f0e02c83d171325a0b /drivers/gpio | |
| parent | 22eaf13c7ff37a92f4192f8dd1ebff31c4920822 (diff) | |
| download | linux-1516c6350aa2770b8a5e36d40c3ec5078f92ba70.tar.bz2 | |
gpio: stmpe: fix interrupt handling bug
commit 43db289d00c6 ("gpio: stmpe: Rework registers access")
reworked the STMPE register access so as to use
[STMPE_IDX_*_LSB + i] to access the 8bit register for a
certain bank, assuming the CSB and MSB will follow after
the enumerator. For this to work the index needs to go from
(size-1) to 0 not 0 to (size-1).
However for the GPIO IRQ handler, the status registers we read
register MSB + 3 bytes ahead for the 24 bit GPIOs and index
registers from MSB upwards and run an index i over the
registers UNLESS we are STMPE1600.
This is not working when we get to clearing the interrupt
EDGE status register STMPE_IDX_GPEDR_[LCM]SB: it is indexed
like all other registers [STMPE_IDX_*_LSB + i] but in this
loop we index from 0 to get the right bank index for the
calculations, and we need to just add i to the MSB.
Before this, interrupts on the STMPE2401 were broken, this
patch fixes it so it works again.
Cc: stable@vger.kernel.org
Cc: Patrice Chotard <patrice.chotard@st.com>
Fixes: 43db289d00c6 ("gpio: stmpe: Rework registers access")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/gpio')
| -rw-r--r-- | drivers/gpio/gpio-stmpe.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index e7d422a6b90b..e2e1b16a42db 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -413,7 +413,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) stmpe->partnum != STMPE1801) { stmpe_reg_write(stmpe, statmsbreg + i, status[i]); stmpe_reg_write(stmpe, - stmpe->regs[STMPE_IDX_GPEDR_LSB + i], + stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, status[i]); } } |