Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Changes queued in gpio/next for the start of the 3.3 merge window

* tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add decode of WM8994 GPIO configuration
  gpio: Convert GPIO drivers to module_platform_driver
  gpio: Fix typo in comment in Samsung driver
  gpio: Explicitly index samsung_gpio_cfgs
  gpio: Add Linus Walleij as gpio co-maintainer
  of: Add device tree selftests
  of: create of_phandle_args to simplify return of phandle parsing data
  gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()
  gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
  gpiolib: output basic details and consolidate gpio device drivers
  pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
  spi/pl022: make the chip deselect handling thread safe
  spi/pl022: add support for pm_runtime autosuspend
  spi/pl022: disable the PL022 block when unused
  spi/pl022: move device disable to workqueue thread
  spi/pl022: skip default configuration before suspending
  spi/pl022: fix build warnings
  spi/pl022: only enable RX interrupts when TX is complete

21 files changed, 128 insertions, 166 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23887dc..4e04157a3683 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -387,7 +387,7 @@ config GPIO_LANGWELL
 	  Say Y here to support Intel Langwell/Penwell GPIO.
 
 config GPIO_PCH
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO"
+	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO"
 	depends on PCI && X86
 	select GENERIC_IRQ_CHIP
 	help
@@ -395,11 +395,12 @@ config GPIO_PCH
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  This driver can access PCH GPIO device.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7223 and ML7831.
 	  ML7223 IOH is for MP(Media Phone) use.
-	  ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7223 is completely compatible for Intel EG20T PCH.
+	  ML7831 IOH is for general purpose use.
+	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config GPIO_ML_IOH
 	tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support"
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
index 9f2781537001..2f263cc32561 100644
--- a/drivers/gpio/gpio-adp5520.c
+++ b/drivers/gpio/gpio-adp5520.c
@@ -193,17 +193,7 @@ static struct platform_driver adp5520_gpio_driver = {
 	.remove		= __devexit_p(adp5520_gpio_remove),
 };
 
-static int __init adp5520_gpio_init(void)
-{
-	return platform_driver_register(&adp5520_gpio_driver);
-}
-module_init(adp5520_gpio_init);
-
-static void __exit adp5520_gpio_exit(void)
-{
-	platform_driver_unregister(&adp5520_gpio_driver);
-}
-module_exit(adp5520_gpio_exit);
+module_platform_driver(adp5520_gpio_driver);
 
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("GPIO ADP5520 Driver");
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index 3525ad918771..9ad1703d1408 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -418,9 +418,8 @@ static int __devinit adp5588_gpio_probe(struct i2c_client *client,
 	if (ret)
 		goto err_irq;
 
-	dev_info(&client->dev, "gpios %d..%d (IRQ Base %d) on a %s Rev. %d\n",
-			gc->base, gc->base + gc->ngpio - 1,
-			pdata->irq_base, client->name, revid);
+	dev_info(&client->dev, "IRQ Base: %d Rev.: %d\n",
+			pdata->irq_base, revid);
 
 	if (pdata->setup) {
 		ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index ec57936aef62..5ca4098ba092 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -223,9 +223,6 @@ static int bt8xxgpio_probe(struct pci_dev *dev,
 		goto err_release_mem;
 	}
 
-	printk(KERN_INFO "bt8xxgpio: Abusing BT8xx card for GPIOs %d to %d\n",
-	       bg->gpio.base, bg->gpio.base + BT8XXGPIO_NR_GPIOS - 1);
-
 	return 0;
 
 err_release_mem:
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 6e16cba56ad2..19eda1bbe343 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -347,7 +347,6 @@ static int __devinit cs5535_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto release_region;
 
-	dev_info(&pdev->dev, "GPIO support successfully loaded.\n");
 	return 0;
 
 release_region:
@@ -382,18 +381,7 @@ static struct platform_driver cs5535_gpio_driver = {
 	.remove = __devexit_p(cs5535_gpio_remove),
 };
 
-static int __init cs5535_gpio_init(void)
-{
-	return platform_driver_register(&cs5535_gpio_driver);
-}
-
-static void __exit cs5535_gpio_exit(void)
-{
-	platform_driver_unregister(&cs5535_gpio_driver);
-}
-
-module_init(cs5535_gpio_init);
-module_exit(cs5535_gpio_exit);
+module_platform_driver(cs5535_gpio_driver);
 
 MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
 MODULE_DESCRIPTION("AMD CS5535/CS5536 GPIO driver");
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index f8ce29ef9f88..56dd047d5844 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -254,17 +254,7 @@ static struct platform_driver da9052_gpio_driver = {
 	},
 };
 
-static int __init da9052_gpio_init(void)
-{
-	return platform_driver_register(&da9052_gpio_driver);
-}
-module_init(da9052_gpio_init);
-
-static void __exit da9052_gpio_exit(void)
-{
-	return platform_driver_unregister(&da9052_gpio_driver);
-}
-module_exit(da9052_gpio_exit);
+module_platform_driver(da9052_gpio_driver);
 
 MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
 MODULE_DESCRIPTION("DA9052 GPIO Device Driver");
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 4e24436b0f82..e38dd0c31973 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -524,17 +524,7 @@ static struct platform_driver bgpio_driver = {
 	.remove = __devexit_p(bgpio_pdev_remove),
 };
 
-static int __init bgpio_platform_init(void)
-{
-	return platform_driver_register(&bgpio_driver);
-}
-module_init(bgpio_platform_init);
-
-static void __exit bgpio_platform_exit(void)
-{
-	platform_driver_unregister(&bgpio_driver);
-}
-module_exit(bgpio_platform_exit);
+module_platform_driver(bgpio_driver);
 
 #endif /* CONFIG_GPIO_GENERIC_PLATFORM */
 
diff --git a/drivers/gpio/gpio-janz-ttl.c b/drivers/gpio/gpio-janz-ttl.c
index 813ac077e5d7..f2f000dd70b3 100644
--- a/drivers/gpio/gpio-janz-ttl.c
+++ b/drivers/gpio/gpio-janz-ttl.c
@@ -201,8 +201,6 @@ static int __devinit ttl_probe(struct platform_device *pdev)
 		goto out_iounmap_regs;
 	}
 
-	dev_info(&pdev->dev, "module %d: registered GPIO device\n",
-			     pdata->modno);
 	return 0;
 
 out_iounmap_regs:
@@ -239,20 +237,9 @@ static struct platform_driver ttl_driver = {
 	.remove		= __devexit_p(ttl_remove),
 };
 
-static int __init ttl_init(void)
-{
-	return platform_driver_register(&ttl_driver);
-}
-
-static void __exit ttl_exit(void)
-{
-	platform_driver_unregister(&ttl_driver);
-}
+module_platform_driver(ttl_driver);
 
 MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>");
 MODULE_DESCRIPTION("Janz MODULbus VMOD-TTL Driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:janz-ttl");
-
-module_init(ttl_init);
-module_exit(ttl_exit);
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 1ebedfb6d46d..839624f9fe6a 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -1150,8 +1150,8 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	nmk_gpio_init_irq(nmk_chip);
 
-	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
-		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	dev_info(&dev->dev, "at address %p\n",
+		 nmk_chip->addr);
 	return 0;
 
 out_free:
diff --git a/drivers/gpio/gpio-pcf857x.c b/drivers/gpio/gpio-pcf857x.c
index 3e1f1ecd07be..2d1de9e7e9bd 100644
--- a/drivers/gpio/gpio-pcf857x.c
+++ b/drivers/gpio/gpio-pcf857x.c
@@ -290,10 +290,7 @@ static int pcf857x_probe(struct i2c_client *client,
 	 * methods can't be called from sleeping contexts.
 	 */
 
-	dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-			gpio->chip.base,
-			gpio->chip.base + gpio->chip.ngpio - 1,
-			client->name,
+	dev_info(&client->dev, "%s\n",
 			client->irq ? " (irq ignored)" : "");
 
 	/* Let platform code set up the GPIOs and their users.
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index a6008e123d04..f0603297f829 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -49,8 +49,8 @@ struct pch_regs {
 
 enum pch_type_t {
 	INTEL_EG20T_PCH,
-	OKISEMI_ML7223m_IOH, /* OKISEMI ML7223 IOH PCIe Bus-m */
-	OKISEMI_ML7223n_IOH  /* OKISEMI ML7223 IOH PCIe Bus-n */
+	OKISEMI_ML7223m_IOH, /* LAPIS Semiconductor ML7223 IOH PCIe Bus-m */
+	OKISEMI_ML7223n_IOH  /* LAPIS Semiconductor ML7223 IOH PCIe Bus-n */
 };
 
 /* Specifies number of GPIO PINS */
@@ -524,6 +524,7 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8043) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8803) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
diff --git a/drivers/gpio/gpio-rdc321x.c b/drivers/gpio/gpio-rdc321x.c
index 2762698e0204..e97016af6443 100644
--- a/drivers/gpio/gpio-rdc321x.c
+++ b/drivers/gpio/gpio-rdc321x.c
@@ -227,18 +227,7 @@ static struct platform_driver rdc321x_gpio_driver = {
 	.remove		= __devexit_p(rdc321x_gpio_remove),
 };
 
-static int __init rdc321x_gpio_init(void)
-{
-	return platform_driver_register(&rdc321x_gpio_driver);
-}
-
-static void __exit rdc321x_gpio_exit(void)
-{
-	platform_driver_unregister(&rdc321x_gpio_driver);
-}
-
-module_init(rdc321x_gpio_init);
-module_exit(rdc321x_gpio_exit);
+module_platform_driver(rdc321x_gpio_driver);
 
 MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
 MODULE_DESCRIPTION("RDC321x GPIO driver");
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index dcbe4541fe49..ab098ba9f1dd 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -230,7 +230,7 @@ static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip,
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
  *
- * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg
+ * The reverse of samsung_gpio_setcfg_2bit(). Will return a value which
  * could be directly passed back to samsung_gpio_setcfg_2bit(), from the
  * S3C_GPIO_SPECIAL() macro.
  */
@@ -467,33 +467,42 @@ static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = {
 #endif
 
 static struct samsung_gpio_cfg samsung_gpio_cfgs[] = {
-	{
+	[0] = {
 		.cfg_eint	= 0x0,
-	}, {
+	},
+	[1] = {
 		.cfg_eint	= 0x3,
-	}, {
+	},
+	[2] = {
 		.cfg_eint	= 0x7,
-	}, {
+	},
+	[3] = {
 		.cfg_eint	= 0xF,
-	}, {
+	},
+	[4] = {
 		.cfg_eint	= 0x0,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[5] = {
 		.cfg_eint	= 0x2,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[6] = {
 		.cfg_eint	= 0x3,
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[7] = {
 		.set_config	= samsung_gpio_setcfg_2bit,
 		.get_config	= samsung_gpio_getcfg_2bit,
-	}, {
+	},
+	[8] = {
 		.set_pull	= exynos4_gpio_setpull,
 		.get_pull	= exynos4_gpio_getpull,
-	}, {
+	},
+	[9] = {
 		.cfg_eint	= 0x3,
 		.set_pull	= exynos4_gpio_setpull,
 		.get_pull	= exynos4_gpio_getpull,
diff --git a/drivers/gpio/gpio-sch.c b/drivers/gpio/gpio-sch.c
index 163515845494..8cadf4d683a8 100644
--- a/drivers/gpio/gpio-sch.c
+++ b/drivers/gpio/gpio-sch.c
@@ -297,18 +297,7 @@ static struct platform_driver sch_gpio_driver = {
 	.remove		= __devexit_p(sch_gpio_remove),
 };
 
-static int __init sch_gpio_init(void)
-{
-	return platform_driver_register(&sch_gpio_driver);
-}
-
-static void __exit sch_gpio_exit(void)
-{
-	platform_driver_unregister(&sch_gpio_driver);
-}
-
-module_init(sch_gpio_init);
-module_exit(sch_gpio_exit);
+module_platform_driver(sch_gpio_driver);
 
 MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
 MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
diff --git a/drivers/gpio/gpio-timberdale.c b/drivers/gpio/gpio-timberdale.c
index c593bd46bfb6..031c6adf5b65 100644
--- a/drivers/gpio/gpio-timberdale.c
+++ b/drivers/gpio/gpio-timberdale.c
@@ -359,18 +359,7 @@ static struct platform_driver timbgpio_platform_driver = {
 
 /*--------------------------------------------------------------------------*/
 
-static int __init timbgpio_init(void)
-{
-	return platform_driver_register(&timbgpio_platform_driver);
-}
-
-static void __exit timbgpio_exit(void)
-{
-	platform_driver_unregister(&timbgpio_platform_driver);
-}
-
-module_init(timbgpio_init);
-module_exit(timbgpio_exit);
+module_platform_driver(timbgpio_platform_driver);
 
 MODULE_DESCRIPTION("Timberdale GPIO driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-ucb1400.c b/drivers/gpio/gpio-ucb1400.c
index 50e6bd1392ce..26405efe0f9f 100644
--- a/drivers/gpio/gpio-ucb1400.c
+++ b/drivers/gpio/gpio-ucb1400.c
@@ -103,23 +103,12 @@ static struct platform_driver ucb1400_gpio_driver = {
 	},
 };
 
-static int __init ucb1400_gpio_init(void)
-{
-	return platform_driver_register(&ucb1400_gpio_driver);
-}
-
-static void __exit ucb1400_gpio_exit(void)
-{
-	platform_driver_unregister(&ucb1400_gpio_driver);
-}
-
 void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
 {
 	ucbdata = data;
 }
 
-module_init(ucb1400_gpio_init);
-module_exit(ucb1400_gpio_exit);
+module_platform_driver(ucb1400_gpio_driver);
 
 MODULE_DESCRIPTION("Philips UCB1400 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-vr41xx.c b/drivers/gpio/gpio-vr41xx.c
index 98723cb9ac68..82d5c20ad3cb 100644
--- a/drivers/gpio/gpio-vr41xx.c
+++ b/drivers/gpio/gpio-vr41xx.c
@@ -571,15 +571,4 @@ static struct platform_driver giu_device_driver = {
 	},
 };
 
-static int __init vr41xx_giu_init(void)
-{
-	return platform_driver_register(&giu_device_driver);
-}
-
-static void __exit vr41xx_giu_exit(void)
-{
-	platform_driver_unregister(&giu_device_driver);
-}
-
-module_init(vr41xx_giu_init);
-module_exit(vr41xx_giu_exit);
+module_platform_driver(giu_device_driver);
diff --git a/drivers/gpio/gpio-vx855.c b/drivers/gpio/gpio-vx855.c
index ef5aabd8b8b7..76ebfe5ff702 100644
--- a/drivers/gpio/gpio-vx855.c
+++ b/drivers/gpio/gpio-vx855.c
@@ -315,17 +315,7 @@ static struct platform_driver vx855gpio_driver = {
 	.remove		= __devexit_p(vx855gpio_remove),
 };
 
-static int vx855gpio_init(void)
-{
-	return platform_driver_register(&vx855gpio_driver);
-}
-module_init(vx855gpio_init);
-
-static void vx855gpio_exit(void)
-{
-	platform_driver_unregister(&vx855gpio_driver);
-}
-module_exit(vx855gpio_exit);
+module_platform_driver(vx855gpio_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Harald Welte <HaraldWelte@viatech.com>");
diff --git a/drivers/gpio/gpio-wm8994.c b/drivers/gpio/gpio-wm8994.c
index 96198f3fab73..92ea5350dfe9 100644
--- a/drivers/gpio/gpio-wm8994.c
+++ b/drivers/gpio/gpio-wm8994.c
@@ -117,6 +117,60 @@ static int wm8994_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 
 
 #ifdef CONFIG_DEBUG_FS
+static const char *wm8994_gpio_fn(u16 fn)
+{
+	switch (fn) {
+	case WM8994_GP_FN_PIN_SPECIFIC:
+		return "pin-specific";
+	case WM8994_GP_FN_GPIO:
+		return "GPIO";
+	case WM8994_GP_FN_SDOUT:
+		return "SDOUT";
+	case WM8994_GP_FN_IRQ:
+		return "IRQ";
+	case WM8994_GP_FN_TEMPERATURE:
+		return "Temperature";
+	case WM8994_GP_FN_MICBIAS1_DET:
+		return "MICBIAS1 detect";
+	case WM8994_GP_FN_MICBIAS1_SHORT:
+		return "MICBIAS1 short";
+	case WM8994_GP_FN_MICBIAS2_DET:
+		return "MICBIAS2 detect";
+	case WM8994_GP_FN_MICBIAS2_SHORT:
+		return "MICBIAS2 short";
+	case WM8994_GP_FN_FLL1_LOCK:
+		return "FLL1 lock";
+	case WM8994_GP_FN_FLL2_LOCK:
+		return "FLL2 lock";
+	case WM8994_GP_FN_SRC1_LOCK:
+		return "SRC1 lock";
+	case WM8994_GP_FN_SRC2_LOCK:
+		return "SRC2 lock";
+	case WM8994_GP_FN_DRC1_ACT:
+		return "DRC1 activity";
+	case WM8994_GP_FN_DRC2_ACT:
+		return "DRC2 activity";
+	case WM8994_GP_FN_DRC3_ACT:
+		return "DRC3 activity";
+	case WM8994_GP_FN_WSEQ_STATUS:
+		return "Write sequencer";
+	case WM8994_GP_FN_FIFO_ERROR:
+		return "FIFO error";
+	case WM8994_GP_FN_OPCLK:
+		return "OPCLK";
+	case WM8994_GP_FN_THW:
+		return "Thermal warning";
+	case WM8994_GP_FN_DCS_DONE:
+		return "DC servo";
+	case WM8994_GP_FN_FLL1_OUT:
+		return "FLL1 output";
+	case WM8994_GP_FN_FLL2_OUT:
+		return "FLL1 output";
+	default:
+		return "Unknown";
+	}
+}
+
 static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
@@ -148,8 +202,29 @@ static void wm8994_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			continue;
 		}
 
-		/* No decode yet; note that GPIO2 is special */
-		seq_printf(s, "(%x)\n", reg);
+		if (reg & WM8994_GPN_DIR)
+			seq_printf(s, "in ");
+		else
+			seq_printf(s, "out ");
+
+		if (reg & WM8994_GPN_PU)
+			seq_printf(s, "pull up ");
+
+		if (reg & WM8994_GPN_PD)
+			seq_printf(s, "pull down ");
+
+		if (reg & WM8994_GPN_POL)
+			seq_printf(s, "inverted ");
+		else
+			seq_printf(s, "noninverted ");
+
+		if (reg & WM8994_GPN_OP_CFG)
+			seq_printf(s, "open drain ");
+		else
+			seq_printf(s, "CMOS ");
+
+		seq_printf(s, "%s (%x)\n",
+			   wm8994_gpio_fn(reg & WM8994_GPN_FN_MASK), reg);
 	}
 }
 #else
diff --git a/drivers/gpio/gpio-xilinx.c b/drivers/gpio/gpio-xilinx.c
index 0ce6ac9898b1..79b0fe8a7253 100644
--- a/drivers/gpio/gpio-xilinx.c
+++ b/drivers/gpio/gpio-xilinx.c
@@ -206,7 +206,6 @@ static int __devinit xgpio_of_probe(struct device_node *np)
 		       np->full_name, status);
 		return status;
 	}
-	pr_info("XGpio: %s: registered\n", np->full_name);
 	return 0;
 }
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index a971e3d043ba..17fdf4b6af93 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -114,7 +114,7 @@ static int gpio_ensure_requested(struct gpio_desc *desc, unsigned offset)
 }
 
 /* caller holds gpio_lock *OR* gpio is marked as requested */
-static inline struct gpio_chip *gpio_to_chip(unsigned gpio)
+struct gpio_chip *gpio_to_chip(unsigned gpio)
 {
 	return gpio_desc[gpio].chip;
 }
@@ -1089,6 +1089,10 @@ unlock:
 	if (status)
 		goto fail;
 
+	pr_info("gpiochip_add: registered GPIOs %d to %d on device: %s\n",
+		chip->base, chip->base + chip->ngpio - 1,
+		chip->label ? : "generic");
+
 	return 0;
 fail:
 	/* failures here can mean systems won't boot... */