diff options
author | Michael Walle <michael@walle.cc> | 2020-09-30 09:42:11 +0200 |
---|---|---|
committer | Bartosz Golaszewski <bgolaszewski@baylibre.com> | 2020-09-30 10:50:30 +0200 |
commit | 3795d7cc4fe13200dae9fade93441b4d5f123b74 (patch) | |
tree | 377ce82decd8cd1030af8d14c3a0a2da60761339 /drivers/gpio | |
parent | e0ab949f152a7f070fbf7b56d9caa4206b140190 (diff) | |
download | linux-3795d7cc4fe13200dae9fade93441b4d5f123b74.tar.bz2 |
gpio: mpc8xxx: simplify ls1028a/ls1088a support
Some Layerscape/QoriQ SoCs have input buffers which needs to be enabled
first. This was done in two different ways in the driver. Unify it.
This was tested on a LS1028A SoC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Diffstat (limited to 'drivers/gpio')
-rw-r--r-- | drivers/gpio/gpio-mpc8xxx.c | 45 |
1 files changed, 12 insertions, 33 deletions
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index 1e866524a4bd..6dfca83bcd90 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -47,27 +47,6 @@ struct mpc8xxx_gpio_chip { unsigned int irqn; }; -/* The GPIO Input Buffer Enable register(GPIO_IBE) is used to - * control the input enable of each individual GPIO port. - * When an individual GPIO port’s direction is set to - * input (GPIO_GPDIR[DRn=0]), the associated input enable must be - * set (GPIOxGPIE[IEn]=1) to propagate the port value to the GPIO - * Data Register. - */ -static int ls1028a_gpio_dir_in_init(struct gpio_chip *gc) -{ - unsigned long flags; - struct mpc8xxx_gpio_chip *mpc8xxx_gc = gpiochip_get_data(gc); - - spin_lock_irqsave(&gc->bgpio_lock, flags); - - gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff); - - spin_unlock_irqrestore(&gc->bgpio_lock, flags); - - return 0; -} - /* * This hardware has a big endian bit assignment such that GPIO line 0 is * connected to bit 31, line 1 to bit 30 ... line 31 to bit 0. @@ -283,7 +262,6 @@ static const struct irq_domain_ops mpc8xxx_gpio_irq_ops = { }; struct mpc8xxx_gpio_devtype { - int (*gpio_dir_in_init)(struct gpio_chip *chip); int (*gpio_dir_out)(struct gpio_chip *, unsigned int, int); int (*gpio_get)(struct gpio_chip *, unsigned int); int (*irq_set_type)(struct irq_data *, unsigned int); @@ -294,11 +272,6 @@ static const struct mpc8xxx_gpio_devtype mpc512x_gpio_devtype = { .irq_set_type = mpc512x_irq_set_type, }; -static const struct mpc8xxx_gpio_devtype ls1028a_gpio_devtype = { - .gpio_dir_in_init = ls1028a_gpio_dir_in_init, - .irq_set_type = mpc8xxx_irq_set_type, -}; - static const struct mpc8xxx_gpio_devtype mpc5125_gpio_devtype = { .gpio_dir_out = mpc5125_gpio_dir_out, .irq_set_type = mpc512x_irq_set_type, @@ -319,8 +292,8 @@ static const struct of_device_id mpc8xxx_gpio_ids[] = { { .compatible = "fsl,mpc5121-gpio", .data = &mpc512x_gpio_devtype, }, { .compatible = "fsl,mpc5125-gpio", .data = &mpc5125_gpio_devtype, }, { .compatible = "fsl,pq3-gpio", }, - { .compatible = "fsl,ls1028a-gpio", .data = &ls1028a_gpio_devtype, }, - { .compatible = "fsl,ls1088a-gpio", .data = &ls1028a_gpio_devtype, }, + { .compatible = "fsl,ls1028a-gpio", }, + { .compatible = "fsl,ls1088a-gpio", }, { .compatible = "fsl,qoriq-gpio", }, {} }; @@ -389,7 +362,16 @@ static int mpc8xxx_probe(struct platform_device *pdev) gc->to_irq = mpc8xxx_gpio_to_irq; - if (of_device_is_compatible(np, "fsl,qoriq-gpio")) + /* + * The GPIO Input Buffer Enable register(GPIO_IBE) is used to control + * the input enable of each individual GPIO port. When an individual + * GPIO port’s direction is set to input (GPIO_GPDIR[DRn=0]), the + * associated input enable must be set (GPIOxGPIE[IEn]=1) to propagate + * the port value to the GPIO Data Register. + */ + if (of_device_is_compatible(np, "fsl,qoriq-gpio") || + of_device_is_compatible(np, "fsl,ls1028a-gpio") || + of_device_is_compatible(np, "fsl,ls1088a-gpio")) gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff); ret = gpiochip_add_data(gc, mpc8xxx_gc); @@ -411,9 +393,6 @@ static int mpc8xxx_probe(struct platform_device *pdev) /* ack and mask all irqs */ gc->write_reg(mpc8xxx_gc->regs + GPIO_IER, 0xffffffff); gc->write_reg(mpc8xxx_gc->regs + GPIO_IMR, 0); - /* enable input buffer */ - if (devtype->gpio_dir_in_init) - devtype->gpio_dir_in_init(gc); ret = devm_request_irq(&pdev->dev, mpc8xxx_gc->irqn, mpc8xxx_gpio_irq_cascade, |